Supervisor jobs in Port Arthur, TX - 106 jobs

The Operations Leader plays a critical role in overseeing daily operations, ensuring efficient job execution, maintaining high standards of safety and quality, and fostering employee development. This position serves as a key liaison between the service center, customers, and internal teams such as Sales and Purchasing. The Operations Leader directly supervises craftsmen and is responsible for driving performance, accountability, and continuous improvement. Key Responsibilities: * Monitor job performance against estimated or established timeframes * Promote efficient repair practices and maintain a strong pace of work * Serve as the primary point of contact for customers regarding in-shop work * Communicate and negotiate effectively to meet customer needs * Provide hands-on technical guidance and problem-solving support to the team * Identify and correct conditions or behaviors that may compromise quality * Verify measurements, test results, and perform final inspections before job completion * Proactively identify and address workplace hazards and unsafe behaviors * Deliver regular feedback to craftsmen on productivity, quality, and safety * Support employees in setting and achieving performance and career development goals * Coordinate on-the-job training, mentoring, and technical development opportunities * Facilitate access to classroom training, seminars, and OEM-led sessions * Perform Reverse Engineering of motor components for future manufacturing or redesign. * Work with teams to develop repair scope for gear boxes, pumps or turbines. * Determine standard procedures for the repair scope per API and ASME. * Work with Department Personnel to provide short and long-term plans to improve work space, equipment and department capabilities. * Work with Department Personnel to reduce the number of defects and rework from each department. * Work with teams to draw and develop repair specifications; specify and develop new and quicker measurement techniques. * Gather and review recommendations and associated shop cost. * Work with operations and Sales to gather and review quotes for outside customer services. Qualifications: * Minimum of 3 years' experience in rotating equipment repair * Strong communication and employee coaching skills * Demonstrated ability to make critical decisions and hold team members accountable * Skilled in identifying nonconformance issues and driving corrective actions * Collaborative mindset with the ability to work across Sales, Operations, and Support teams * Proactive, solutions-oriented approach to leadership

Job Title: Lead Operator / Working Foreman - Environmental & Civil Construction Employee Type: Full-Time, Hourly, Non-Exempt Reports to: Superintendent / Project Manager Schedule: Monday-Friday with overtime as needed About O6 Environmental O6 Environmental is a self-performing environmental contractor with a 20-year track record completing complex remediation, earthwork, and civil construction projects across the U.S. We take pride in performance, safety, and being able to self-perform critical scopes that keep our projects moving. Summary We need a Lead Operator / Working Foreman who can take control of field production and keep work moving. This role blends equipment operation with directing crews, coordinating with the superintendent, and pushing daily progress across earthwork, utilities, and site development. Strong GPS (Topcon) skills and the ability to read plans and set layout are essential. Key Responsibilities Operate heavy equipment and assist with trenching, grading, and pipe work Lead field crews to hit daily and weekly production goals Support superintendent with planning, sequencing, and quality checks Perform basic layout, verify grades, and operate Topcon GPS systems confidently Direct laborers and operators on task assignments and hold point requirements Maintain safe operations in active excavation, piping, and remediation areas Conduct equipment inspections and coordinate field maintenance needs Communicate field issues quickly so decisions aren't delayed Assist with dewatering, trench safety, pipe installation, and backfill operations Complete daily reporting as needed (headcounts, progress, issues) Required Skills & Experience Strong heavy equipment operator with civil and infastructure background Topcon GPS experience (building surfaces, checking grade, offsets, etc.) Ability to read plans, understand cut/fill, slopes, and trench requirements Strong leadership presence - able to take direction and also run work independently High awareness of jobsite safety and working around utilities, pipe, and excavation Ability to train less-experienced operators and push production without compromising safety Comfortable working long days and adapting to shifting priorities Valid driver's license Preferred Qualifications 40-Hour HAZWOPER (or willingness to obtain; training provided) OSHA 10 or 30 Experience on large civil/environmental projects Work Conditions Outdoor work in all weather Ability to safely lift, climb, enter excavations, and perform physical tasks Must pass pre-employment drug screen and background check What We Offer Competitive hourly pay based on experience Overtime opportunities Health & dental insurance 401(k) with company match Paid vacation Stable long-term project workload and growth opportunities O6 Environmental is an Equal Opportunity Employer.

The Operations Supervisor is responsible for oversight and accountability of the quality, compliance, HSE, and personnel management functions required to manage shop production operations and to ensure the finished product leaving the company meets the requirements of the customer as defined by the customer's purchase order, the customers scope of work, and/or the customer's special instructions. The Operations Supervisor will work with the HSE and Quality Teams to coordinate all quality/safety related functions pertaining to the operation of the company and the safety of company personnel, and will be accountable for the utilization of Intelex for required HSE and Quality information. In addition, the Operations Supervisor will ensure all production work performed by SIS shop personnel is completed in accordance with company policy, and with safety and quality as a top priority. Responsibilities: Health, Safety, Environmental Management: Intelex - EHS incident management> Inspections> Findings> Action Plans reporting, review and execution Ensure adherence to all SIS HSE policies and procedures Ensure weekly Safety Meetings and others are performed as required by SIS HSE policies and procedures Learn to read, interpret, and train others on Safety Data Sheets (SDS), pre-cautions, Personnel Protection Equipment (PPE), hazards levels, etc. Take accountability to minimize workplace injury and illness occurrences. Support personnel assigned safety responsibilities intended to contribute to the success of the HSE MS Make sure shop stays clean, safe and clear of debris and clutter as per the current 5S strategies and initiatives Quality: Intelex - NCR> CAR> Customer Complaints reporting, review and execution Ensure adherence to SIS Quality Management system Ensure direct reports review Internal Audit Advisories and Monthly Quality Reports Strive to produce a product that is reasonably free from errors and rework Enforce the usage of the ValvKeep Service Software as required by SIS Procedures Perform weekly VK audits and hold accountability for location level data in the system Compliance: Ensure direct reports maintain all required trainings, certifications, etc. Collaborate with compliance on calibration and corresponding recordkeeping of company owned gauges, instruments, PMI machines etc. Knowledge of ASME, NBIC, and VR Programs and ensure Employees are also trained on this material Interface with ASME, National Board, Customer's and Manufacturer's on internal audits Operational Efficiency: Production: Familiar with SIS Safety Procedures (SP), Quality Procedures (QP) and Work Instructions (WI). Communicate production levels, order status, lead times and shipping schedules in a timely manner, including but not limited to production meetings Provide timely, accurate and open two-way communication regarding production scheduling updates with proper departments Supervise and assist when required the job process at the individual work stations to ensure the technicians follow quality/safety procedures efficiently Encourage individual development with training and education Tableau: Utilize the ADP Dashboard to effectively manage time in order to achieve billable targets. Tech view> Week running total> Work place fatigue> Unbillable OT/DT Business Continuity: Collaborate with Centralized Quoting and Business Execution to ensure efficient production of New Assembly orders Oracle - Review WIP reports and complete WIP jobs Release WIP jobs to the warehouse for shipping Human Resources: Collaborate with BM/OM to ensure new hire onboarding's get completed. Ensure Performance Reviews are given annually or as directed by Human Resources and/or Management. Encourage the ongoing Training & Development of Shop Personnel through the Shop Certification Program and OEM Training where applicable. Duties: Ensure all training is performed and documented in regards to Safety, company Quality Procedures, Site Specific and Work Instruction Enforce company rules and policies. Document any and all violations. Ensure maintenance is performed on all shop and field equipment as required by SIS policies and procedures. Positional Requirements & Qualifications: Education & Experience High school diploma or GED equivalent 5 years plus experience/Job specific degree and/or certification (preferred) Current or up-to-date TWIC (preferred) Current Basic OSHA Safety Training (preferred) Valve Technician Level III Experience Skills & Abilities Safety and quality-minded Basic mechanical aptitude including, but not limited to, basic hand and power tool knowledge Minimal knowledge of machine work Minimal knowledge of welding Proficiency in Microsoft Office, ERP's and CMMS (preferred) Organized and detail-oriented Demonstrate effective time management skills Must be accessible for Night and Weekend Work as needed Must be able to travel and have a clear driving record in accordance to company driving guidelines Clear background check and drug/alcohol screening Essential Physical Functions: Lifting: up to 50 pounds Adjusting or moving objects up to 50 pounds in all directions Lift and carry: 50 pounds for 100 feet Bending, stooping, walking and climbing stairs Ascending or descending ladders, stairs, scaffolding, ramps Moving self in different positions to accomplish tasks in various environments including tight and confined spaces Remaining in a stationary position, often standing or sitting for prolonged periods Moving about to accomplish tasks or moving from one worksite to another Communicating with others to exchange information Repeating motions that may include the wrists, hands and/or fingers Operating machinery and/or power tools Operating motor vehicles or heavy equipment Assessing the accuracy, neatness and thoroughness of the work assigned Required physical ability if mandated by customer or regulatory requirements Able to hold body weight while swinging on rope during static and dynamic transfer (offshore)

Leadman - Provides leadership, instruction, and guidance to other craft workers in work crew, providing assistance to Foreman, while working in the capacity of a journeyman. Assembles, analyzes for defects, and repairs boilers, tanks, vats and pressure vessels, boiler auxiliaries and ancillaries according to blueprints specifications, using power tools and hand tools. RESPONSIBILITIES * Locates and marks reference points for columns or plates on foundation, sing master straight edge, squares, transit and measuring tape and applying knowledge of geometry. * Attaches rigging or signals crane operator to lift components to specified position. * Aligns structures or plates sections to assemble boiler frame, tanks or vats sing plumb bobs, levels, wedges, dogs or turnbuckles. * Hammers, flame-cuts, files grinds irregular edges of sections or structural parts to facilitate fitting edges together. * Bolts or arc-welds structures and sections together. * Positions drums and headers into supports or bolts or welds supports to frame. * Aligns water tubes, connects and expands ends to drums and headers using tube expander. * Bolts or welds casing sections, uptakes, stacks, baffles and such fabricated parts as chutes, air heaters, fan stands, feeding tube, cat walks, ladders, coal hoppers and safety hatch to frame using wrenches * Performs minor maintenance or cleaning activities with tools and equipment. * Installs manholes, handholds, valves, gauges and feed water connection in drums to complete assembly of water tube boilers. * Signals crane operator in lifting parts to specific positions. * Assists in testing assembled vessels by pumping water or gas under specified pressure into vessels and observing instruments for evidence of leakage. * Repairs boilers or tanks in field by unbolting or flame cutting defective sections or tubes, straightening plates using torch or jacks, installing new tubes, fitting and welding new sections and replacing worn lugs on bolts. * May fasten and caulk sections of vessels, using pneumatic fasteners and caulking hammers. * May line firebox with refractory brick and blocks. * May fabricate parts such as, stacks, uptakes, and chutes to adapt boiler to premises in which it is installed. * Flame cutting and knowledge of torch use. * Responsible for observing and complying with all safety and project rules. Performs other duties as required. JOB REQUIREMENTS * Work within precise limits or standards of accuracy. * Apply shop mathematics to solve problems. * Plan work and select proper tools. * Compare and see differences in the size, shape and form of lines, figures and objects. * Visualize objects in three dimensions from plans and drawings. * Make decisions based on measurable criteria. * Work at heights without fear. QUALIFICATIONS May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. PHYSICAL REQUIREMENTS 1. Strength: a. Standing 60% Walking 20% Sitting 20% b. Lifting 50 lb. Carrying 50 lb. Pushing 70 ft-lb. Pulling 70 ft-lb. 2. Climbing F Balancing F 3. Stooping O Kneeling O Crouching O Crawling O Reaching C Handling C Fingering F EXPLANATION OF SYMBOLS NP Not Present O Occasionally (0-33%) F Frequently (34-66%) C Constantly (67-100%) Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development.

Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at MPS. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. Why Modular Power Solutions (MPS)? Committed. Innovative. Engaged. If you're looking to take your career to the next level and work with some of the best and brightest in the industry, we want to hear from you. Since our founding, Modular Power Solutions (MPS) has been driven to positively impact the communities where we live and work. We are an organization built on integrity and we have a culture that empowers people, embraces diversity, and inspires everyone to do their best. As one of the largest EMPLOYEE-OWNED electrical contractors in the United States, you will have the unique benefit of being a shareholder at a company that is experiencing tremendous growth and success. When our people succeed and fuel our success, we reward them. We'd love to have you as a shareholder! YOUR NEXT OPPORTUNITY: The Production Manager III is responsible for providing overall manufacturing support and oversight for top tier hyper scale developers. WHAT YOU'LL DO: The Head of Production directives to ensure all production programs are overseen and managed consistently on programs that are sophisticated in scope and technical complexity. by taking on initiatives and thinking BIG on ways to improve production processes. the necessary bill of materials list for their respective production program. product design is followed on the manufacturing floor. Coordinate with the BVA lead for the necessary manpower to match the production scheduling demand. QA/QC processes are followed and adhered to. Collaborate with the program GF in creating and maintaining production schedules. Coordinate with the program management teams regarding customer needs and timelines. Collaborate with the Safety Team to ensure safe manufacturing practices are being followed. Mentor and support Production Manager I and II with advanced technical knowledge and how to be a transparent communicator and leader. Provide guidance and direction to Production Managers I and II. Act as the senior production team leader and decision maker when the Head of Production is unavailable. The duties and responsibilities are intended to describe the general nature and scope of work being performed by this position. This is not a complete listing and other duties will be assigned based on the position's role within the business unit. WHAT YOU'LL NEED TO BE SUCCESSFUL: Subject matter expert knowledge of construction and electrical industry required. Skilled at managing multiple projects simultaneously. Must possess the ability to oversee the most advanced technical programs, supervise site and staff as required, and be the technical SME (Subject Matter Expert) for their respective production program while maintaining transparent internal and external customer relations. Proficient in using a computer and Microsoft Office (Outlook, Word, Excel, etc.); Oracle preferred. Ability to prioritize and manage multiple tasks, changing priorities as necessary. Ability to work under time pressure and adapt to changing requirements with a positive attitude. Effective oral and written communication skills as required for the position. Ability to be self-motivated, proactive and an effective team player. WHAT YOU BRING TO US: Associates and/or Bachelors Degree in technical field preferred. Minimum 15 years field electrical experience and an electrician license required. Minimum 18 years field / industrialized construction and/or manufacturing industry experience required. A combination of each is acceptable. TRAVEL: Up to 10% WORKING CONDITIONS: General work environment - sitting for long periods, standing, walking, typing, carrying, pushing, bending. Work is conducted primarily indoors with varying environmental conditions such as fluorescent lighting and air conditioning Noise level is usually low to medium; it can be loud on the jobsite. We fully comply with the ADA and applicable state law, including considering reasonable accommodation measures that may enable qualified disabled applicants and employees to perform essential functions. Occasional lifting of up to 30 lbs. MPS is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, pregnancy, age (over 40), or any other categories protected by applicable federal, state, or local law. To find out more about MPS: Learn more about our Rosendin Foundation which was established to positively impact communities, build, and empower people and inspire innovation. Check out our Culture of Care - MPS Culture of Care YOU Matter - Our Benefits ESOP - Employee Stock Ownership 401 K Annual bonus program based upon performance, profitability, and achievement 17 PTO days per year plus 10 paid holidays Medical, Dental, Vision Insurance Term Life, AD&D Insurance, and Voluntary Life Insurance Disability Income Protection Insurance Pre-tax Flexible Spending Plans (Health and Dependent Care) Charitable Giving Match with our Rosendin Foundation The pay range for this role is what we expect to pay for candidates that meet the specified qualifications and requirements listed on this job description. Candidate's pay can vary based on location, job-related experience, skills, and education. Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business…and your career. MPS is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Who We Are Enovis Corporation (NYSE: ENOV) is an innovation-driven medical technology growth company dedicated to developing clinically differentiated solutions that generate measurably better patient outcomes and transform workflows. Powered by a culture of continuous improvement, global talent and innovation, the Company's extensive range of products, services and integrated technologies fuels active lifestyles in orthopedics and beyond. For more information about Enovis, please visit *************** What You'll Do At Enovis we sweat the little things. We embrace collaboration with our partners and patients, and we glory in the grind of scientific excellence - with the goal of transforming medical technology as we know it. Because that's how we change the lives of patients for the better. And that's how we create better together. As a key member of the Enovis Procurement Team you will play an integral part in helping Enovis drive the medical technology industry forward through transforming patient care and creating better patient outcomes. Job Title/High Level Position Summary: We are seeking a highly motivated Sourcing Lead with a proven track record in the orthopedic reconstruction implant industry. The ideal candidate will have approximately 5 years of sourcing, procurement, or supply chain experience and will play a critical role in managing supplier relationships, driving cost savings, and ensuring supply continuity for key implant components and finished devices. This role requires a balance of strategic sourcing expertise, industry knowledge, and hands-on execution. Key Responsibilities: * Lead sourcing activities for orthopedic reconstruction implants, including raw materials, machined components, and finished goods. * Develop and execute category strategies that support business growth, quality, and cost targets. * Manage supplier selection, qualification, and performance monitoring, with a strong emphasis on regulatory compliance (FDA, ISO 13485, MDR). * Partner with R&D, Quality, and Operations teams to ensure supplier capabilities align with innovation and product pipeline needs. * Negotiate supply agreements, contracts, and pricing to achieve year-over-year cost improvements. * Mitigate supply chain risks by identifying alternate suppliers, managing capacity constraints, and implementing dual sourcing strategies where appropriate. * Drive continuous improvement in supplier performance, including quality, delivery, and sustainability. * Utilize data analytics to monitor spend, forecast demand, and support strategic decision-making. * Stay current on market trends, new manufacturing technologies, and competitive landscape in orthopedic implants. Essential Requirements: * Bachelor's degree in Supply Chain, Engineering, Business, or related field (Master's preferred). * Minimum of 5 years of sourcing or supply chain experience, ideally within medical devices or orthopedic reconstruction. * Strong knowledge of implant manufacturing processes (casting, forging, precision machining, coatings, packaging). * Experience working in a regulated industry with cGMP, FDA, and ISO 13485 standards. * Proven negotiation and contract management skills. * Excellent project management, analytical, and problem-solving skills. * Strong communication and stakeholder management abilities. "Creating better together". It's the Enovis purpose, and it's what drives us and empowers us every day on a global scale. We know that the power to create better - for our customers, our team members, and our shareholders - begins with having the best team, pursuing common goals, operating at the highest levels, and delivering extraordinary outcomes. Watch this short video and discover what creating better together means to us at Enovis: Our Enovis Purpose, Values and Behaviors on Vimeo We offer a comprehensive benefits package which includes: * Medical Insurance * Dental Insurance * Vision Insurance * Spending and Savings Accounts * 401(k) Plan * Vacation, Sick Leave, and Holidays * Income Protection Plans * Discounted Insurance Rates * Legal Services ABOUT ENOVIS Enovis Corporation (NYSE: ENOV) is an innovation-driven medical technology growth company dedicated to developing clinically differentiated solutions that generate measurably better patient outcomes and transform workflows. Powered by a culture of continuous improvement, global talent and innovation, the Company's extensive range of products, services and integrated technologies fuels active lifestyles in orthopedics and beyond. Visit ************** to learn more. EQUAL EMPLOYMENT OPPORTUNITY: Enovis provides equal employment opportunities based on merit, experience, and other work-related criteria and without regard to race, color, ethnicity, religion, national origin, sex, age, pregnancy, disability, veteran status, or any other status protected by applicable law. We also strive to provide reasonable accommodation to employees' beliefs and practices that do not conflict with Enovis policies and applicable law. We value the unique contributions that every employee brings to their role with Enovis. EOE AA M/F/VET/Disability Statement All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, religion, color, national origin, sex, protected veteran status, disability, or any other basis protected by federal, state or local laws.

Starting Pay Rate: Hourly - Hourly Plan, 13.00 USD Hourly Tidal Wave Auto Spa is one of the fastest growing car wash chains in the country and is a recognized leader in the industry with locations nationwide. Our wave of success began in 2004 in the small town of Thomaston, GA, which is where Tidal Wave Headquarters calls home. Tidal Wave Auto Spa is a national brand that is forecasted to grow at a rapid rate for years to come, so we are aggressively pursuing individuals with exceptional talent and leadership qualities. Our goal is to redefine the car wash industry with the latest technology, top-notch friendly service, and unwavering dedication to its employees! Do you want to learn how to become the leader of a team? We can help you take the first step! A Tidal Wave Team Leader assists with the responsibilities of the site's facility and its operations. Tidal Wave is a fast and fun, team-oriented environment, and our Team Leaders set the example by exceeding expectations and assisting the management team! Learn what it takes to run a car wash and have a great time doing it! This position is a great way to get your foot in the door in one of the fastest growing industries in the country! Tidal Wave has immense professional development opportunities, and a great career path to management positions. What We Will Provide: Competitive pay with the opportunity to earn weekly commission. Flexible scheduling that can work around any life dynamic. Part-time and Full-Time positions are available. A tremendous opportunity for growth and development within Tidal Wave! What Your Day Will Look Like: Provide friendly & enthusiastic customer service. Assist in opening and closing the facility. Enroll customers in our Unlimited Car Wash Club. Prep vehicles before they go through the tunnel. Safely guide customers onto the tunnel conveyor. Assist in regular maintenance of all equipment. Maintain the facility, which includes landscape maintenance & pressure washing, etc. What You Will Need: Friendly, Responsible, and Reliable! Ability to be on your feet for long hours at a time. Willingness to work in all weather conditions. Drug Screen and Background Check Required per state guidelines. At least 18 years of age. As a Tidal Wave Auto Spa Team Member, you will enjoy our Benefits Program to help secure your financial future and preserve your health and well-being, including: PTO is based on the company's PTO policy. Eligibility for health, dental, and vision coverage subject to 90 day waiting period. Eligibility for 401(K), subject to plan terms. Eligibility for benefits such as life insurance, short- and long-term disability, hospital indemnity, critical illness, and accidental, subject to 30 day waiting period. Company-paid holidays. **Must enroll in New Hire Benefits within 30 days of the date of hire for coverage to take effect. The equal employment opportunity policy of Tidal Wave Auto Spa provides for a fair and equal employment opportunity for all associates and job applicants regardless of race, color, religious creed, national origin, ancestry, age, gender, pregnancy, sexual orientation, gender identity, marital status, familial status, disability or genetic information, in compliance with applicable federal, state and local law. Tidal Wave Auto Spa hires and promotes individuals solely on the basis of their qualifications for the job to be filled.

BlueWave Express Car Wash is a growing company at the forefront in an attractive niche of the car wash business. We are seeking a Team Lead for our express car wash! The ideal candidate will possess the ability to support the manager in operating a high volume, customer driven express car wash facility. We are looking for a smile even in the rain, and a personal pride of ownership in their work product that will drive the ideal candidate to succeed. WASHING CARS IS FUN…. JOIN US TODAY!! Ideal Candidate will possess the following skill sets - Excellent customer service skills Conflict resolution skill sets for both customer and employee relationships. Retail sales exposure - customer sales Basic management and time management skills Intermediate to advanced use of Windows based suite (Outlook/Excel/Word) Attention to detail. SMILING, FUN ATTITUDE High School Education Ability to work 40 hours per week as needed. Bilingual, Spanish a plus Previous Car Wash experience a plus Responsibilities: Ability to provide coaching and motivating your team. Show an attractive store operation by keeping all areas clean and organized. Provide training to all new hires. Ability to identify areas/parts requiring maintenance repair and properly compose email to the corresponding team. Lead the team in providing excellent customer service and maintain positive and productive relationships with employees. Assist customers with questions and resolve any open issues in a timely manner. Handle other projects assigned by the manager. Full benefits package including medical, dental, vision, for all full-time employees. Paid vacation and holidays, advancement opportunities, and training provided. Visit our company website for more information: ****************************** Qualifications What We're Looking For: Bring some leadership experience to the table - but if you're bursting with enthusiasm and positivity, we want to hear from you! Ride the wave of challenges with a smile and a problem-solving mindset - because every challenge is just an opportunity in disguise. Surf the web with basic information technology and computer skills - because in today's world, tech-savviness is key. Flex your mechanical muscles, or be ready to dive in and learn - because at Bluewave, we're all about growth and development. Dive into the fast-paced world of car washing with gusto - because there's no adventure too big for our team! No experience? No worries! We'll teach you everything you need to know - all you need is a willingness to learn and a passion for making waves. Ready to kick off your career journey with Bluewave Express Wash? Grab your surfboard and join us on this exhilarating ride - apply now and let's make some waves together!

HPC-Industrial, powered by Clean Harbors, in Port Arthur, TX is looking for a IS Supervisor to join their safety conscious team! The IS Supervisor is responsible for two or more crews by planning, leading, organizing, and coordinating the daily operations of the service line crew. This includes responsibility for the proper operation of equipment, driving operational efficiencies at the work site and ensuring accurate documentation related to the job is completed in a timely fashion. Ensures compliance with all Company policies/procedures and maintains/improves good customer relations by providing quality, timely industrial cleaning services. Transitioning Military, this is a great opportunity to leverage your skills and training as you return to civilian life. Required Qualifications: Must be able to wear protective clothing or equipment. This includes, but is not limited to Nomex coveralls, a back belt, slicker suits, rubber boots, a fresh air breathing mask and escape pack and a hard hat; Must be able to work under extreme climate conditions (excessive high heat index of 95+ degrees Fahrenheit, 98% humidity and subzero weather conditions) relative to geographic location; Must be able to withstand exposure to dust) chemical and environmental), fumes (chemical and fluids), exhaust and highly pressurized fluids. What does it take to work for HPC-Industrial? Minimum 2 years, verifiable service within the industrial cleaning industry; High school diploma/GED or equivalent; Strong knowledge in the operation of equipment used in Hydroblasting and vacuum truck; Strong communications and interpersonal skills; Current certification as an authorized HPC-Industrial driver; Mechanical aptitude and experience troubleshooting HPC-Industrial equipment is preferred. About HPC-Industrial: HPC-Industrial, a Clean Harbors company, is the premier industrial cleaning and environmental services company in North America supporting the upstream, downstream, and utility sectors. HPC-Industrial offers an exceptional three-pronged safety system, innovative career development platform, committed customer service, deep industry expertise, and advanced technology and automation. We are committed to safety, people, growth, service, and performance. We provide the safest, most efficient operational experience for our customers and the most comprehensive training and career development for our employees. HPC-Industrial is an equal opportunity employer. HPC-Industrial is a Military & Veteran friendly company. HPC Industrial powered by Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. *HPC Why work for HPC-Industrial? Health and Safety is our #1 priority and we live it 3-6-5! Competitive wages Comprehensive health benefits coverage after 30 days of full-time employment Group 401K with company matching component Own part of the company with our Employee Stock Purchase Plan Opportunities for growth and development for all the stages of your career Generous paid time off, company paid training and tuition reimbursement Positive and safe work environments Key Responsibilities: Ensures Health and Safety is the number one goal by following policies, processes, and acting in a safe manner at all times; Promote HPC-Industrial's safety, environmental and operations policies; Manage a crew to safety and accurately complete HPC-Industrial operations; Timely and accurate completion and review of paperwork documenting work functions; Train and develop equipment technicians. (5% - HPC-Industrial equipment technicians); Ability to interact with customers in a professional manner/exhibit excellent communication/human relation skills; Perform Hydroblasting and vacuum truck services; Additional duties as assigned.

Our Company ResCare Community Living Operations Management focuses on efficiently meeting the needs of our clients across various lines of business. If your passion is managing and developing staff to ensure quality care to help our clients live their best life, we encourage you to apply today! Responsibilities Supervises the provision of assistance to person(s) served in order to promote their physical, social, and psychological well-being, including that staff interactions with person(s) served promotes the rights of the person(s) served to achieve an enhanced quality of life. Ensures that each person served has an activity schedule developed and implemented and monitors and ensures staff follows procedures to promote optimum health care and behavior supports, including the implementation of services outlined in person(s) served service plan, and staff training. Monitors and ensures staff completes all documentation as required to ensure quality services. Monitors labor hours and ensures assigned service sites are operating within budgetary guidelines. Responsible for client funds, receipts and proper documentation. Ensures that staff are deployed appropriately, and that staffing ratios are in compliance with regulatory and service plan requirements. Ensures schedules are prepared and posted in a timely manner, and efficiently utilizes staff. Conducts timely performance reviews and conducts staff counseling and corrective actions including work Improvement plans and follow-up. Provides timely and appropriate feedback and oversight on staff documentation, including daily progress notes, data sheets, and incident reports. Assists with the review and tracking of incident and accident reports and participates as needed with investigations involving persons served and employees at assigned service sites. Ensures applicable Occupational Safety Health Administration compliance standards are met and all related training occurs. Documents training and compliance in accordance with company and regulatory requirements. Other duties as assigned Qualifications BA/BS in Business, Health Care Administration or a Social Science degree or High school diploma/GED and equivalent work experience of 3 years One year of supervisory experience required. Previous experience providing services and supports to individuals with developmental disabilities and/or related disorders preferred. Experience in managing systems, processes, and people. Must meet all agency requirements for pre-employment as required by company and/or State regulations. Based on geographical location, you may be required to be certified as a Food Service Director About our Line of Business ResCare Community Living, an affiliate of BrightSpring Health Services, has five decades of experience in the disability services field, providing support to individuals who need assistance with daily living due to an intellectual, developmental, or cognitive disability. We provide a comprehensive range of high-quality services, including: community living, adult host homes for adults regardless of disability, behavioral/mental health support, in-home pharmacy solutions, telecare and remote support, supported employment and training programs, and day programs. For more information, please visit ******************************* Follow us on Facebook and LinkedIn. Salary Range USD $44,990.40 / Year

Core Laboratories is the Reservoir Optimization Company™ Core Laboratories Inc. is a leading provider of proprietary and patented reservoir description and production enhancement services and products used to optimize petroleum reservoir performance. The Company has over 70 offices in more than 50 countries and is located in every major oil-producing province in the world. We are well-positioned to serve the growing needs of the energy transition while continuing to fulfill the demand for reliable and affordable energy sources like crude oil and natural gas. Our services, products, expertise, and innovations will continue to be essential as our clients meet the growing demand for energy globally. For more information, visit *********************** At Core Lab, our values matter: Safety, Honesty and Integrity, Customer Focus, Building Trust, and Employee Development. We regard our employees as our greatest asset. We believe that identifying, attracting, developing, and retaining talent are significant actions because our people are so important. SUMMARY Supervises and performs routine laboratory tests to determine chemical or physical characteristics designated by Saybolt's client. Supervises all laboratory operations, personnel and safety programs in the designated location. DUTIES & RESPONSIBILITIES Read and understand all analysis, quality and safety standards in English, including ASTM, UOP, IP and other well-defined analytical standards and procedures used in the laboratory. Set up, adjust and operate all laboratory equipment, quality systems and safety programs and train laboratory staff in the correct testing, quality and safety practices in accordance with applicable standards, company policies and sound laboratory practice. Assist in or perform basic analytical tests from well-defined standards and procedures as required by operational considerations. Laboratory Supervisor training must be documented in the Saybolt Laboratory Chemist/Technician Training Record book, verifying that the Supervisor is able to perform all required tests in accordance with applicable standards and sound laboratory practice. Supervise and monitor the calibration of laboratory instruments and verify that all chemists and technicians under the Manager's supervision are trained and qualified to calibrate designated instruments and maintain proper calibration records. Prepare chemical solutions according to standard formulas. Exercise, and require lab employees to exercise, procedural, safety and quality requirements specified in Laboratory Manual #5, Safety Manual #7, and the Core Laboratories Safety and Environmental Manual, and company policies. Monitor personal and staff technical, safety and policy training. Determine that laboratory employees pass appropriate examinations in petroleum, chemical and gas analysis, Right-to-Know training, hazardous materials disposal, and other safety, performance and compliance training required by the materials tested and handled, and applicable regulations. Supervise laboratory employees and ensure their compliance with acceptable work habits, safety requirements, company policies, compliance to standards and policies, accuracy of test results, attitude, attendance, time keeping, and all other aspects of their job performance. Laboratory Supervisor must report to the Manager when any lab employee does not meet company performance or behavior standards. Ensure that samples to be tested are properly prioritized for testing; review test results and compare them with specifications or typical test results (if any). Understand and be able to complete laboratory raw data sheets and make accurate entries into Saybolt's laboratory computer programs. Maintain all required quality control documents and have documents available for audit at all times. Monitor the operation and profitability of the laboratory. Purchase (with proper approval) and maintain laboratory equipment necessary to service customer requirements at the location. Perform final file reviews to include billing. Perform TMAs of staff. QUALIFICATIONS High school diploma or equivalent is required. Bachelor's degree preferred. 5+ years of related experience and/or training. KNOWLEDGE, SKILLS & ATTRIBUTES Strong communication, presentation, and interpersonal skills. Ability to work independently and collaboratively in a fast-paced and dynamic environment. Proficient in Microsoft Office applications. OTHER INFORMATION (US ONLY) PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The Company requires laboratory technicians to meet the following physical qualifications Pass the drug and alcohol test specified for safety-sensitive employees. Be able to work in the presence of odors typical of petroleum or petrochemicals without allergic reactions or nausea when such odors are within OSHA-designated permissible exposure limits (PELs). While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; talk or hear; and test or smell. The employee frequently is required to walk, sit, and reach with hands and arms. The employee is occasionally required to stoop, kneel, crouch, or crawl. Laboratory personnel must regularly lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be exposed to fumes, airborne particles, and toxic or caustic chemicals. The Company provides product information, training, engineering controls, and personal protective equipment in an effort to protect employees from exposure to potentially harmful levels of those materials. Employees are required to read product information, use available engineering controls, follow guidelines presented during training, and be able to wear and use appropriate protective equipment, including respiratory protective equipment, as may be required by the work environment. The noise level in the work environment is usually moderate. Core Laboratories, including all of its affiliated and related entities, is an equal opportunity employer and is committed to creating an inclusive environment for everyone. Employment decisions are made regardless of characteristics including, but not limited to, race, color, sex, sexual orientation, gender identity, national origin, age, disability, religion, genetic information, protected veteran or uniformed service member status, and any other characteristic protected under applicable law.

* Responsible for reviewing client job scope, compliance with all safety procedures and job documentation, accountability of job equipment and tooling prior to arriving to job site, achieving and exceeding client quality expectations, accomplishing and exceeding client production expectations, and setting up and operation of portable machine tools at client locations. * Review client job scope, compliance with all safety procedures and job documentation, accountability of job equipment and tooling prior to arriving at job site, achieving and exceeding client quality expectations, accomplishing and exceeding client production expectations, and setup and operation of portable machine tools at client locations. * Perform hot tap and line stop procedures utilizing customized equipment and patented process in accordance with all Team procedures. * Produce technical input and guidance in hot tap and line stop pressure balanced equipment and SmartStop technology equipment. The areas, fields, and industries in which the HTS Supervisor will work include the petrochemical/refining industries and midstream/pipeline industries within the whole of the United States. The HTS Supervisor will operate/maintain hot tap and line stop equipment. This includes, but is not limited to, hot tap machines, line stop actuators, cutters, hydraulic power units, line stop heads, SmartStop equipment, and service valves. The HTS Supervisor is responsible for completing pre-job setup procedures to assemble the hot tap and line stop equipment to be used on each project. The HTS Supervisor physically assembles and tests the equipment in preparation of each hot tap project. The HTS Supervisor executes hot tap work in the manner in which TEAM trains them to do so. TEAM's procedures for executing this work are stringent and require attention to detail by the properly certified personnel. The employee utilizes the hot tap equipment to drill into a pipe or vessel, operating at a pressure or vacuum, under containment conditions, without the loss of product or interruption of system operation in accordance with these procedures. The HTS Supervisor will be one of 12 employees certified to operate TEAM's patented line stop technology - SmartStop. As a level 3 technician, the HTS Supervisor is expected to provide technical input on all SmartStop projects in which they are involved. MINIMUM EDUCATION: N/A MINIMUM EXPERIENCE: 120 months' experience with practical, theory, hands-on testing, and execution of services. TRAVEL REQUIREMENT: 10% domestic travel to various worksites across the United States to perform work when others are not available. TEAM Industrial Services, Inc. strictly prohibits discrimination against applicants, employees, or any other covered persons because of race, color, religion, creed, national origin or ancestry, ethnicity, sex, gender, age, physical or mental disability, citizenship, past, current or prospective service in the uniformed services, genetic information, or any other characteristic protected under applicable federal, state or local laws. TEAM's Core Values Safety First / Quality Always - In everything we do Integrity - Uncompromising standards of integrity and ethical conduct Service Leadership - Leading Service Quality, professionalism and responsiveness Innovation - Supports continuous growth and improvement Pride and Respect - For our customers, for each other and for all our stakeholders Teamwork - Global teamwork and collaboration

Make an Impact as an Eligibility Supervisor You will work within Child Care Assistance a program of ChildCareGroup that manages child care subsidies in support of working parents, and quality initiatives to improve the early education for children throughout Dallas, Jefferson, Harden and Orange counties in Texas. You will oversee the process of eligibility and case management of work item requests to ensure positive employment outcomes and will be responsible for coaching and monitoring each employee to ensure that timelines, benchmarks, and performance standards are met and in accordance with federal, state, and local guidelines. Why work for ChildCareGroup? Founded in 1901, ChildCareGroup's (CCG) mission is to champion a strong early childhood system that teaches children and parents, trains early childhood professionals, and assists families. ChildCareGroup believes that children do better as their parents do better. When families thrive, communities succeed. ChildCareGroup offers a generous benefits package including Paid Parental Leave, (12) Company Holidays, 401(k) match, Paid Time Off, Medical, Dental, Vision and more! You are a great fit for the role because you identify with the CCG SPIRIT, our core values: SERVICE - Lead with a servant's heart PROFESSIONALISM - Perform our best every day INTEGRITY - Do what is right RESPECT - Treat each other the way we wish to be treated INCLUSION - Value individual differences TEAMWORK - Communicate and collaborate to achieve our goals Position Details Responsibilities * Supervises the daily operations of work item processing and determines work schedules to ensure adequate coverage to meet or exceed the expected benchmarks. * Supervises direct reports including Eligibility Specialists, and occasionally temporary employees. * Actively participates in hiring, developing, and reviewing employees and their performance. * Oversees Eligibility Specialists to maintain productivity standards, including motivating and encouraging staff. * Ensures compliance with all CCG policies and procedures including but not limited to EEO/Affirmative Action, ADA, Conduct, Conflict of Interest, Solicitation and Safety and ensures all staff supervised complies with all CCG policies and procedures. * Performs complex administrative duties requiring oversight, attention to detail and analysis. * Analyzes workflow reports, to ensure the team is functioning on the highest level. * Researches more advanced customer issues. * Monitors performance measures to meet goals for delivery of service. * Provides monthly monitoring of eligibility review, and work item processing to insure that benchmarks are met. * Provides feedback on strengths and opportunities, as well as handle all performance related issues as required by CCG policy. * Assesses team processes and implements improvement strategies when needed. * Reports to senior management on team accomplishments, achievements, and productivity. * Answers questions that Eligibility Specialists will have when processing work item requests. * Assists and advises staff members in resolving problems and issues that arise with internal and external customers. * Occasionally represents CCA at community educational fairs, conferences, parent seminars or orientations, other community agencies and provider meetings as assigned. * Will be required to schedule staff to attend the required sessions as needed. * Assists with special projects and performs other duties as assigned. Education and Experience * Equivalent to graduation from a four-year college or university with major coursework related to the area of assignment and three years of experience within or related to the program assignment; or, an equivalent combination of education and experience sufficient to successfully perform the essential duties of the job as listed above * Certified Workforce Professional preferred * One or more years experience in a task lead or supervisory role * Comprehensive working knowledge of non-profit, government, or workforce programs concepts, practices, and procedures * Excellent customer service skills and two or more years in a customer service environment required * Ability to handle pressure and work in a fast-paced atmosphere * Positive attitude, excellent interpersonal and active listening skills * Flexible and detail-oriented * Ability to resolve complaints and problem solve successfully using resources * Excellent computer and typing skills; proficiency in Microsoft Word and Microsoft Excel required * Capacity to manage multiple projects and tasks simultaneously * Scheduling flexibility is required * Able to work in a team environment and be a team player * Possess efficient organizational and time management skills * Must promote a positive work environment and have prompt and regular attendance * Must have strong ethics and keep information in a strict confidential manner Travel and Compliance Requirements * Must have a valid Texas driver's license * Driving record must comply with CCG's automobile insurance carrier requirements * Must have liability insurance coverage and reliable personal transportation * Ability to travel locally or out of town as required * Mileage reimbursement is offered when applicable * Must submit to and successfully pass all required CCG and Partner Program background checks throughout employment. These include FBI, Fingerprinting, Neglect and Abuse, Federal, State, Local, and Sex Offender background checks. Background check requirements may be expanded at the discretion of CCG and Partner Programs. ChildCareGroup's Generous Health and Wellness Benefits * Paid Parental Leave * Short Term, Long Term Disability and Basic Life Insurance at no cost * Medical, Dental and Vision Insurance * Telemedicine at no cost * 401(k) with a company match * Paid Time Off * (12) Paid Company Holidays * And more! ChildCareGroup is an equal opportunity employer/program. Auxiliary aids and services are available upon request to individuals with disabilities.

At Office Depot, the Retail Team Lead is a part-time role providing "total solutions" to our customers encompassing Products, Technology, Services, Furniture and Print offerings. The Retail Team Lead will quickly build and maintain customer relationships and become a trusted advisor by utilizing provided training to support sales offerings. The Team Lead will support a customer-centric environment, engagement with the local community, all while contributing to a positive culture aligned with the Office Depot 5C values of Customer, Commitment, Change, Caring, and Creativity. The Retail Team Lead will demonstrate a passion for the brand, technology products, furniture, print, and other services/products offered to our customers. Retail Team Lead (PT) will utilize Office Depot's proven sales principles to proactively engage customers, to drive the sales of our total offerings, and properly assess customer needs to ensure satisfaction in every interaction. Through enthusiasm and expertise, Retail Team Lead will help us create and nurture a vibrant sales culture, enhancing our store's visual and merchandising standards, freight, and logistics activities, and prioritizing unparalleled client satisfaction. The Retail Team Lead will also be a part-time 'Key Carrier' for their location and may perform Leader on Duty functions while in the role. In addition, the Retail Team Lead (PT) must be able to perform External Key Carrier responsibilities, which include but are not limited to, opening & closing responsibilities and be scheduled for those respective shifts. The essential functions of this position may require you to consent to periodic comprehensive background checks conducted by a third-party. **Primary Responsibilities:** + **Print Sales and Services:** + Responsibility in the Print function to support efficient operation while driving overall store sales. + Operates and assists associates on all equipment within the Print Services area to maintain efficient production and ensure client orders are completed correctly and on-time. + Effectively utilizes communication tools to request assistance within the Print Services area, and to coordinate the appropriate service for all customers throughout the store. + **Operational Efficiency:** + Process merchandise accurately and efficiently, adhering to established procedures, deadlines, and visual merchandising standards. + Identify areas for process improvement and implement plans to reduce waste and inefficiencies. In partnership with all associates, ensure regular loss prevention compliance. + Ensures compliance with company policies, procedures, and practices; and supports the company's loss prevention efforts. Performs other duties as assigned. + Contribute to increasing sales and profitability through conversion, Average Order Value (AOV), and customer satisfaction improvement initiatives. + **Client Engagement:** + Drives positive client satisfaction levels including coaching and training to associates to enhance the customer experience. + Supports community outreach initiatives to drive client/customer retention. + Works to continually develop personal selling skills and product knowledge through sales and service tools provided to deliver the total solution. + Performs other duties as assigned. + **External Key Carrier and Leader on Duty:** + Ensuring the safety and security of the building and associates during the absence of the management team. + In partnership with all associates, ensure regular loss prevention compliance. + Performing opening or closing responsibilities. + This includes driving awareness of key performance indicators, providing guidance to improve results, activation/deactivation of the store's alarm system, and processes for opening or closing the store. + May assist in review of cash handling, cashier, and merchandise error logs, register voids, tax exemption and all related cash office audits. + Other duties as deemed necessary **Education and Experience:** + High School diploma or equivalent education preferred + Minimum 1-3 years of experience in related field + Sales and/or Customer Service experience preferred. + Basic computer skills and the ability to use computers and technology for information, and to access information necessary to complete the job. + Skilled in Customer Service and Print Services experience would be desired. + Must possess advanced selling skills · Must possess strong interpersonal and communication skills, which are necessary to establish a selling relationship with customers. + Must be adaptable to a changing environment. + Must be able to assist others in a professional environment. + Possess excellent verbal and written communication skills. + Must possess the ability to use technology applicable to role, and to access information necessary to complete daily responsibilities. + Must possess ability to process information/merchandise through POS register system. + Pays close attention to detail to ensure high quality production in the Print Services area + Positive and Engaging + Action Oriented + Integrity, Accountability & Trust + Demonstrate passion for the brand, products, services and solutions offered to our customers + Must possess a desire to continually develop personal selling skills and product knowledge + Drive for Results + Decision Quality + Patience **About The ODP Corporation:** The ODP Corporation (NASDAQ:ODP) is a leading provider of products and services through an integrated business-to-business (B2B) distribution platform and omnichannel presence, which includes world-class supply chain and distribution operations, dedicated sales professionals, online presence, and a network of Office Depot and OfficeMax retail stores. Through its operating companies Office Depot, LLC; ODP Business Solutions, LLC; and Veyer, LLC, The ODP Corporation empowers every business, professional, and consumer to achieve more every day. **Disclaimer:** The above statements are intended to describe the general nature and level of work being performed by associates assigned to this classification and are not intended to be a complete list of all responsibilities, duties and skills required of associates so classified. Other duties may be assigned. **Pay, Benefits & Work Schedule:** The salary range for this role is $8.65/hour to $14.36/hour, however all state and local minimum wages will be complied with, resulting in a possible adjustment to the salary range displayed. The company offers competitive salaries, a benefits package, which includes a 401(k) and more, along with plenty of opportunity to move and grow within our organization! For immediate consideration for this exciting position, please click the Apply Now button. You will be eligible to participate in an incentive program, paid in accordance with the Incentive Plan terms and conditions. **How to Apply:** Click the Apply Now button and follow the instructions on each page. When you have completed the application, click the submit button. **Application Deadline:** The job posting will remain open for a minimum of 3 days and will expire once the position has been filled. **Equal Employment Opportunity:** The company is committed to providing equal employment opportunities in all employment practices. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, citizenship status, marital status, age, disability, protected veteran status, sexual orientation or any other characteristic protected by law. We will consider for employment qualified applicants with arrest and conviction records City & County of San Francisco Fair Chance Ordinance. REQNUMBER: 97401

Leadman - Provides leadership, instruction, and guidance to other craft workers in work crew, providing assistance to Foreman, while working in the capacity of a journeyman. Assembles, analyzes for defects, and repairs boilers, tanks, vats and pressure vessels, boiler auxiliaries and ancillaries according to blueprints specifications, using power tools and hand tools. RESPONSIBILITIES - Locates and marks reference points for columns or plates on foundation, sing master straight edge, squares, transit and measuring tape and applying knowledge of geometry. - Attaches rigging or signals crane operator to lift components to specified position. - Aligns structures or plates sections to assemble boiler frame, tanks or vats sing plumb bobs, levels, wedges, dogs or turnbuckles. - Hammers, flame-cuts, files grinds irregular edges of sections or structural parts to facilitate fitting edges together. - Bolts or arc-welds structures and sections together. - Positions drums and headers into supports or bolts or welds supports to frame. - Aligns water tubes, connects and expands ends to drums and headers using tube expander. - Bolts or welds casing sections, uptakes, stacks, baffles and such fabricated parts as chutes, air heaters, fan stands, feeding tube, cat walks, ladders, coal hoppers and safety hatch to frame using wrenches - Performs minor maintenance or cleaning activities with tools and equipment. - Installs manholes, handholds, valves, gauges and feed water connection in drums to complete assembly of water tube boilers. - Signals crane operator in lifting parts to specific positions. - Assists in testing assembled vessels by pumping water or gas under specified pressure into vessels and observing instruments for evidence of leakage. - Repairs boilers or tanks in field by unbolting or flame cutting defective sections or tubes, straightening plates using torch or jacks, installing new tubes, fitting and welding new sections and replacing worn lugs on bolts. - May fasten and caulk sections of vessels, using pneumatic fasteners and caulking hammers. - May line firebox with refractory brick and blocks. - May fabricate parts such as, stacks, uptakes, and chutes to adapt boiler to premises in which it is installed. - Flame cutting and knowledge of torch use. - Responsible for observing and complying with all safety and project rules. Performs other duties as required.

Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at MPS. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. YOUR NEXT OPPORTUNITY: The Vendor Managed Inventory Team Lead will be responsible for all aspects of the site Vendor Managed Inventory (VMI) including SIOP processes, site procurement and other supply chain / procurement tasks as assigned by leadership. This position is a ‘working manager' role that will execute contractual obligations while providing oversight, support, and mentorship to Procurement Specialists and Procurement Analysts. WHAT YOU'LL DO: Monitor, evaluate, and mentor working team on meeting or exceeding performance goals and expectations. Ensure team is complying with procurement policies and procedures and is in strict adherence to documentation requirements. Oversee and plan all aspects of procurement process at site. Effectively manage people and projects at assigned site to pursue cost savings opportunities, while implementing and adhering to process standardization efficiencies. Provide coaching and mentoring to staff personnel as required and provide performance evaluation input to MPS leadership. Represent company in contracts and formulating policies with suppliers. Manage all aspects of the VMI process at the facility including SIOP processes to ensure material availability to meet production demands Manage all local site suppliers and sub-contractors Review site forecast and communicate to suppliers material demand to support production; support MPS Category Managers on developing site material forecast Support MPS Supply Chain Strategic Planning initiatives as needed Review all internal/external metrics for our suppliers, procurement, and operations to ensure targets are being met, and engage with MPS Leadership to identify the root cause and mitigation actions to address any deficiency gaps. Ensure recommended awards are in accordance with the approved decision model and Delegation of Authority to ensure adherence to procurement policies and procedures. Communicate and enforce procurement policies and procedures. Responsible for projections financial planning, delivery schedules and procurement reporting. Responsible for the development and review of all procurement analytics, reporting and deliverables. Oversee the development and implementation of procurement and contract management instructions, policies, and procedures. Oversee the projections, financial planning, delivery schedules and reporting. Review materials for accuracy upon receipt, and oversee material review process. Enter documentation into purchasing system. Review and approve invoices with vendor and A/P resolve invoice problems. Oversee the development and use of 3rd-party Non-Disclosure Agreements (NDA). Oversee the return of material to ensure proper and timely credit to the business The duties and responsibilities are intended to describe the general nature and scope of work being performed by this position. This is not a complete listing and other duties will be assigned based on scope requirements and customer demands throughout the corporation. WHAT YOU'LL NEED TO BE SUCCESSFUL: Experience in manufacturing and construction helpful Ability to delegate work effectively and balance the dual role of overseeing people and projects while performing in a working manager role. Excellent communication and interpersonal skills. Must exhibit supervisory skills and demonstrate the ability to mentor Procurement Specialists and Procurement Analysts. Must be able work with supervision Proficient in Microsoft (Outlook, Word, etc.); Experience with Oracle a plus Ability to adapt to and support ongoing process improvement initiatives. Ability work pressure and adapt requirements a positive Effective oral and written communication skills as required for position. Ability be self-motivated, proactive and an effective team player. Ability effectively and professionally all of employees, management and staff alike, vendors, clients, and others. WHAT YOU BRING TO US: Bachelor's Degree Minimum 5 years' procurement experience. Experience managing inventory and SIOP processes Combination of education, training, and relevant experience. TRAVEL: Up to 10% WORKING CONDITIONS: General work environment - sitting for long periods, standing, walking, typing, carrying, pushing, bending. Work is conducted primarily indoors with varying environmental conditions such as fluorescent lighting and air conditioning Noise level is usually low to medium; it can be loud on the jobsite. We fully comply with the ADA and applicable state law, including considering reasonable accommodation measures that may enable qualified disabled applicants and employees to perform essential functions. Occasional lifting of up to 30 lbs. YOU MATTER - OUR BENEFITS ESOP - Employee Stock Ownership 401K Annual bonus program based upon performance, profitability, and achievement 17 PTO days per year plus 10 paid holidays Medical, Dental, Vision Insurance Term Life, AD&D Insurance, and Voluntary Life Insurance Disability Income Protection Insurance Pre-tax Flexible Spending Plans (Health and Dependent Care) Charitable Giving Match with our Rosendin Foundation Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business and your career. Modular Power Solutions is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. The pay range for this role is what we expect to pay for candidates that meet the specified qualifications and requirements listed on this job description. Candidate's pay can vary based on location, job-related experience, skills, and education. Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business…and your career. MPS is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Description Operations Management focuses on efficiently meeting the needs of our clients across various lines of business. If your passion is managing and developing staff to ensure quality care to help our clients live their best life, we encourage you to apply today! Responsibilities Supervises the provision of assistance to person(s) served in order to promote their physical, social, and psychological well-being, including that staff interactions with person(s) served promotes the rights of the person(s) served to achieve an enhanced quality of life. Ensures that each person served has an activity schedule developed and implemented and monitors and ensures staff follows procedures to promote optimum health care and behavior supports, including the implementation of services outlined in person(s) served service plan, and staff training. Monitors and ensures staff completes all documentation as required to ensure quality services. Monitors labor hours and ensures assigned service sites are operating within budgetary guidelines. Responsible for client funds, receipts and proper documentation. Ensures that staff are deployed appropriately, and that staffing ratios are in compliance with regulatory and service plan requirements. Ensures schedules are prepared and posted in a timely manner, and efficiently utilizes staff. Conducts timely performance reviews and conducts staff counseling and corrective actions including work Improvement plans and follow-up. Provides timely and appropriate feedback and oversight on staff documentation, including daily progress notes, data sheets, and incident reports. Assists with the review and tracking of incident and accident reports and participates as needed with investigations involving persons served and employees at assigned service sites. Ensures applicable Occupational Safety Health Administration compliance standards are met and all related training occurs. Documents training and compliance in accordance with company and regulatory requirements. Other duties as assigned Qualifications BA/BS in Business, Health Care Administration or a Social Science degree or High school diploma/GED and equivalent work experience of 3 years One year of supervisory experience required. Previous experience providing services and supports to individuals with developmental disabilities and/or related disorders preferred. Experience in managing systems, processes, and people. Must meet all agency requirements for pre-employment as required by company and/or State regulations. Based on geographical location, you may be required to be certified as a Food Service Director

Who We Are Enovis Corporation (NYSE: ENOV) is an innovation-driven medical technology growth company dedicated to developing clinically differentiated solutions that generate measurably better patient outcomes and transform workflows. Powered by a culture of continuous improvement, global talent and innovation, the Company's extensive range of products, services and integrated technologies fuels active lifestyles in orthopedics and beyond. For more information about Enovis, please visit *************** What You'll Do At Enovis we pay attention to the details. We embrace collaboration with our partners and patients, and take pride in the pursuit of scientific excellence - with the goal of transforming medical technology as we know it. Because that's how we change the lives of patients for the better. And that's how we create better together. Why work at Enovis? See for yourself. As a key member of the Surgical Business Unit you will play an integral part in helping Enovis drive the medical technology industry forward through transforming patient care and creating better patient outcomes. Job Title: Supervisor, Maintenance Reports To: Sr. Director, Operations Location: Austin, Texas Business Unit Description: Driven by Enovis' desire to create innovative products that help improve quality of life and restore movement to those suffering from degenerative arthritis, Enovis Surgical provides orthopedic surgeons with modern, patient-focused solutions for total joint arthroplasty. Partnerships with key surgeon consultants help provide advanced and proprietary patented solutions, including EMPOWR 3D Knee, the only dual-pivot knee system on the market, and AltiVate Reverse Shoulder, a market-leading system, based on the design principles of the RSP Shoulder, which has demonstrated excellent clinical outcomes at 10 years. Enovis Surgical offers surgeons and their patients a full range of primary and revision implants for hip, knee, shoulder, and elbow reconstructive joint surgeries, in addition to the tools and digital health technology needed in today's changing healthcare environment. Key Responsibilities:. * Working knowledge of the operation and maintenance requirements of CNC machinery * Installation, service, and repairs of CNC machines and industrial equipment * Ability to accurately diagnose and troubleshoot a wide variety of equipment and systems such including but not limited to hydraulics, PLCs, electrical, pneumatic, and other mechanical systems * Ability to interpret machine tool manuals, technical documents, and additional resources to troubleshoot and repair equipment issues * Complete planned and minor to major preventive maintenance activities * Conduct investigation and root cause analysis on machine crashes and unexpected events * Ability to work with vendors and suppliers to obtain spare parts and request technical assistance * Enter purchase order requisitions and capital expenditure requests as needed * Ability to lead and motivate maintenance technicians to meet desired goals * Ability to work well with cross-functional team members Manages others to ensure appropriate SOPs, Standard Work and enforces applicable personnel policies and procedures * Actively participates in performance management and optimizes labor needs with business and customer requirements * Must have excellent conflict resolution skills and be able to handle confrontation diplomatically; must be able to work in a dynamic environment where constructive feedback from others is encouraged * Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; responds well to questions; participates in meetings * Follows policies and procedures; completes administrative tasks correctly and on time; supports organization's goals and values * Strong Microsoft Office Skills (Word, Excel, PowerPoint) * Ability to work within a computerized maintenance management system (CMMS) * Develop spare parts strategies for consumables and critical business machines and processes * Support on boarding and commissioning of new machinery and technologies, including automation * Rigorous adherence to SOPs and cGMP regulations with the ability to accurately complete documentation associated with the manufacturing process in a timely fashion is required * Draft new and revise existing manufacturing SOPs/work instructions to support process improvements and maintain cGMP compliance. * Raise processing and equipment issues in timely manner to manufacturing management and actively participate in troubleshooting Currently, Enovis does not provide sponsorship for employment visas (e.g., H-1B) and will not offer such sponsorship in the future. Applicants must already have full-time work authorization in the United States, both now and in the future, without requiring sponsorship. Minimum Basic Qualifications: * HS diploma or equivalent; technical or trade school degree preferred * 3-5 years of maintenance and training experience on CNC machines Desired Characteristics: * Preventive and predictive maintenance experience * Previous experience in a regulated environment, Aerospace, Medical Technology, Pharmaceutical * Experience with Fanuc, Mitsubishi, Siemens controls and PLCs * General knowledge of Fanuc robots, including robot recovery and troubleshooting * Understand and replacing servo motors and encoders * Ability to diagnose spindle issues, including spindle rebuild * Box way and Linear guide installation or repair * Diagnosis and troubleshooting using ladder logic * Hydraulics and fluid systems * Experience using, trouble shooting and training on electrical components including, Multimeter, relays, contactors, and overloads * Mechanical aptitude * Brands: * DMG MORI * Chiron * Ipsen * United Grinding * Kitamura * Makino * Mazak * Haas * Eagle Medical * Sencorpwhite Travel Requirements: * Travel will be required between Cedar Park, TX and Austin, TX. "Creating better together". It's the Enovis purpose, and it's what drives us and empowers us every day on a global scale. We know that the power to create better - for our customers, our team members, and our shareholders - begins with having the best team, pursuing common goals, operating at the highest levels, and delivering extraordinary outcomes. What does creating better together mean to us at Enovis? Discover the "why" behind our purpose, values and behaviors: Our Enovis Purpose, Values and Behaviors on Vimeo We offer a comprehensive benefits package that includes: * Medical Insurance * Dental Insurance * Vision Insurance * Spending and Savings Accounts * 401(k) Plan * Vacation, Sick Leave, and Holidays * Income Protection Plans * Discounted Insurance Rates * Legal Services ABOUT ENOVIS Enovis Corporation (NYSE: ENOV) is an innovation-driven medical technology growth company dedicated to developing clinically differentiated solutions that generate measurably better patient outcomes and transform workflows. Powered by a culture of continuous improvement, global talent, and innovation, the company's extensive range of products, services, and integrated technologies fuels active lifestyles in orthopedics and beyond. Visit ************** to learn more. EQUAL EMPLOYMENT OPPORTUNITY Enovis provides equal employment opportunities based on merit, experience, and other work-related criteria without regard to race, color, ethnicity, religion, national origin, sex, age, pregnancy, disability, veteran status, or any other status protected by applicable law. We also strive to provide reasonable accommodation to employees' beliefs and practices that do not conflict with Enovis policies and applicable law. We value the unique contributions that every employee brings to their role with Enovis. Join us in creating better together. EOE AA M/F/VET/Disability Statement All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, religion, color, national origin, sex, protected veteran status, disability, or any other basis protected by federal, state or local laws.

Boyd Gaming Corporation has been successful in gaming jurisdiction in which we operate in the United States and is one of the premier casino entertainment companies in the United States. Never content to rest upon our successes, we will continue to evolve and retain a position of leadership in our industry. Our past success, our current business philosophies and our sound business planning, combine to position Boyd Gaming Corporation to maximize value for our shareholders, our team members and our communities. Job Description Responsible for the day-to-day operations of the Sports Book including but not limited to establishing limits for betting propositions in various sporting events, ensuring adherence to gaming regulations and company policies, and promoting positive public relations with customers. • Oversee the daily operations of the Sports Book • Ensure the all company and property policies and procedures as well as all applicable laws and regulations are consistently adhered to. • Maintain thorough and accurate records of transactions to ensure the integrity of operations. • Responsible for personnel related matters relative to scheduling, coaching, counseling, and training; provide input into hiring and discharging. • Explain and interpret rules and payoffs for customers. • Resolve customer issues in a timely and appropriate manner. • Maintain communication with the Company's Race & Sports Hub and remain updated on all guidelines established by the Hub. • Other related duties as assigned by management. Qualifications Must be at least 21 years of age. One (1) year of recent experience in the same or similar position preferred. Must be thoroughly knowledgeable in applicable gaming regulations. Must have excellent customer service and communication skills. Must be able to obtain/maintain any necessary licenses and/or certifications. Additional Information Boyd Gaming is proud to be an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class. Boyd Gaming is proud to be an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class.