Technician jobs in La Porte, IN - 2,248 jobs

Controls Technician - Chicago Heights, IL Pay: $38 - $40/hr Shift: 1st Shift | Monday - Friday | 8a-5p We're looking for a skilled Controls Technician to support, maintain, and improve all plant electrical and control systems-including electrical, pneumatic, hydraulic, mechanical, and network subsystems. In this role, you'll act as a technical subject-matter expert, providing troubleshooting support, leading root-cause analysis, training maintenance techs across all shifts, and ensuring smooth operation of all production and facility systems. You'll work closely with the Maintenance Supervisor, Planner, and Manager to keep production on track, equipment running safely, and documentation up to date. What You'll Do Core Responsibilities Inspect, troubleshoot, repair, and maintain food processing and packaging equipment. Perform corrective, preventive, and scheduled maintenance on a wide variety of automated equipment. Diagnose and repair mechanical, electrical, pneumatic, hydraulic, and control-system issues. Install, program, and troubleshoot PLCs, HMIs, servo drives, VFDs, and related systems. Support and coordinate mechanical technicians during breakdowns and major repairs. Maintain accurate documentation on all controls systems-including hardware, software, and changes. Work safely using proper PPE and adhere to all HACCP, Allergen, Food Defense, and GMP policies. Perform inspections and repairs while equipment is operating on a live production schedule. Lead troubleshooting efforts during downtime and expedite equipment recovery. Maintain secondary plant systems (steam, chilled water, pneumatics, HVAC, electrical distribution, refrigeration, etc.). Write and update job procedures and frequencies within the CMMS (SAP). Train technicians on PLC/VFD/HMI troubleshooting using laptops and plant software tools. Occasionally travel for training, equipment work, or parts procurement. Keep the work area clean and report any potential contamination or unsafe conditions immediately. Key Technical Skills Skilled electrical troubleshooting (120V-480V). Strong understanding of PLC programming (RSLogix, FactoryTalk View, ladder logic). Experience with servo systems, VFDs, motor controls, HMIs, pneumatics, and hydraulics. Ability to read and interpret P&IDs, electrical single-line diagrams, loop drawings, termination diagrams, and mechanical layouts. Experience maintaining batching or continuous process systems and their networks. Ability to perform mechanical, plumbing, and instrumentation work at a semi-skilled level. Qualifications Previous experience as a Controls Technician, Automation Technician, or similar role in manufacturing (food industry experience preferred). Strong troubleshooting aptitude-electrical, mechanical, and automation. Ability to work in a fast-paced production environment under pressure. Excellent communication skills and teamwork mindset. Regular, predictable attendance. CMMS experience (SAP preferred): Create work order notifications Enter labor time Provide feedback for procedure updates Write job-specific procedures and task frequencies Apply now for immediate consideration for this Controls Tech position in Chicago Heights, IL . We Look forward to connecting with you!

This is a Computer Field Technician Position doing hardware repairs and installations on laptop and desktop units. You must have prior experience with laptop and desktop hardware. As part of your onboarding, you will be certified in Dell and Lenovo. All certifications are free to you. Job Details This is a 1099 Contract position. Call volume varies but is typically between 2-5 calls per day. Pay is based on the number of calls completed. Pay starts at $35 per ticket. You will be completing hardware part replacements for Dell and Lenovo warranty services. Pay period -every Friday after the first week of completing tickets. You must have a reliable form of transportation to run these calls. You must have access to a computer and the internet to log onto your portal. Tickets are run Monday through Friday. You must be able to log into your tech portal every workday by 9 am to accept, code (update status), and map out your calls. You will be responsible for contacting your customers and confirming a window to go onsite to complete the service. Parts will be provided for you by the manufacturers. They are typically held at FedEx for you to pick up in the morning. You will be provided with shipping labels and materials to return the removed parts.

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military

Job DescriptionDescription: What You'll Do Install & Wire Systems: Install and wire fire alarm, access control, CCTV, intercom, and intrusion systems using blueprints and building plans. Program Systems: Configure and program a variety of security and life safety platforms. Perform Maintenance: Conduct preventative maintenance, cleaning, adjustments, and testing on systems to keep them performing at their best. Repair & Troubleshoot: Diagnose hardware and software issues, repair system malfunctions, and ensure reliable system performance. Testing: Test components such as circuits, sensors, and backup systems to verify proper operation. Provide Support: Assist end users, explain system functionality, and offer technical support when needed. Document Work: Keep accurate records of installations, configurations, and maintenance activities. Integrate Systems: Help integrate security and life safety technologies with related subsystems. Train Users: Teach customers how to operate and maintain their systems effectively. Follow Safety Standards: Adhere to all codes, safety practices, and company policies during installation and service work. Manage Inventory: Maintain tools and track parts and materials needed for each job. Collaborate: Respond to work orders, communicate with clients, and coordinate with internal teams to deliver an excellent customer experience. Requirements: ? What We're Looking For Minimum of 3 years experience in Security system installation and support Strong technical skills in electronics, electrical wiring, and security/life safety systems Excellent problem-solving and troubleshooting abilities Clear communication skills with clients, coworkers, and leadership Customer-service focused mindset Ability to read and interpret blueprints and schematics Strong documentation and record-keeping habits Self-motivated, dependable, and able to work independently or as part of a team

The purpose of this position is to install, service, and test electronic security systems including burglar and fire alarms, CCTV, Access Control systems and all related electronic security equipment in residential, commercial, and industrial environments. Starting pay ranges from $20-$35 based on experience- also there is a monthly Incentive program of up to 10% of your annual pay! Here's why you want to work here: - Wages are based on skill level and experience. - Tool allowance - Company vehicle and cell phone - Competitive benefits! - Technicians are able to earn more money based on individual drive and willingness to learn new tasks. - Training and field experience is provided to assist you with achieving your goals! Here's what you'll need: - Valid driver's license and submit to pre-employment background checks and drug test. - Must be able to obtain specified licenses/certifications to perform work in the security industry according to the rules and regulations prescribed by the State in which the branch operates. - High School Graduate or GED is required for all Per Mar Security Services positions. - Must be able to travel, as needed. - Must have mathematical skills including ability to calculate figures and amounts such as interest, proportions, percentages, area, circumference, and volume along with ability to apply concepts of basic algebra and geometry. - Must have knowledge of fire and electrical codes to ensure safe and proper installation of alarm systems and devices. - Must possess the values important to Per Mar Security - Integrity, Communication, Excellent Service and Accountability. Here's what you'll be doing: - Install and wire specified alarm system devices. - Test and verify that all systems and devices installed (alarm panels, sirens, horns, strobes, etc.) function properly and in accordance to manufacturer's specifications. - Use multimeters for particular volts and OHM readings and circuit analysis. - Hook up RJ31X to specified panel mountings of particular devices such as motion detectors, keypads, and controls. - Program alarm systems via programmer or keypad. - Explain and demonstrate to the customer how the specific alarm system installed works. - Complete proper paperwork and submit to the appropriate department on a daily basis. - Communicate with clients, co-workers and Per Mar's Central Monitoring Station. - All other reasonable duties as assigned by the Installation Supervisor specific to the operation of daily business functions. Essential Functions to be performed with or without a reasonable accommodations

The Manufacturing Technician plays a crucial role in the extrusion production process and reports directly to the Production Supervisor. They are responsible for ensuring the production equipment is set up correctly and according to product specifications. They use their problem-solving skills to address machine errors and their communication skills to document reports. The technician also supports leadership for a team of operators and manages rotations and downtime. Essential Job Responsibilities Responsible for setting up extrusion machinery, including all downstream equipment and tooling Operate extrusion machinery daily, working with multiple materials and configurations, without direct supervision Clean equipment and tools used in the extrusion process Complete detailed documentation as it relates to machine set-up and quality system requirements, and ensure that all required paperwork is accurate and complete Identify and correct problems; apply experience and knowledge in adjusting and training of others in areas of expertise; document changes; monitor and focus on scrap reduction Identify and assist in resolving safety, health, or environmental issues associated with processes or equipment, and maintain compliance with good manufacturing processes Fill in for operators when rotations for breaks are needed Produce quality parts; inspecting and approving profiles to ensure they meet all manufacturing requirements Inspect the quality of materials and alert Production Supervisor or appropriate personnel of material issues and/or failures immediately Inspect the quality of machinery and report equipment failures to the Maintenance Department Responsible for the updating of set-up sheets and documentation as required Must have the knowledge to set up all lines within the manufacturing plant Perform other duties as assigned. Required Qualifications High School Diploma or equivalent Familiar with standard concepts, practices, and procedures of plastic extrusion Strong communication skills- written and verbal Ability to work under pressure in a fast-paced environment Ability to read a work order and use a tape measure within 1/16” Preferred Skills and Experience 3+ years of prior plastic extrusion experience Lean manufacturing experience Caliper and micrometer experience Physical Requirements Standard plant work environment and involves lifting moderately heavy items (over 25lbs and up to 75lbs) Ability to stand for a 10-hour shift, which may include: bending, twisting, climbing, walking, and lifting Company Overview Boyd is the world's leading innovator in sustainable engineered material and thermal solutions that make our customers' products better, safer, faster, and more reliable. We develop and combine technologies to solve ambitious performance targets in our customers' most critical applications. By implementing technologies and material science in novel ways to seal, protect, cool, and interface, Boyd has continually redefined the possible and championed customer success for over 90 years. Additional Information This document is intended to describe the general content of, and requirements for performing this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or requirements. Boyd is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disabilities age, sexual orientation, marital or veteran status, or any other legally protected status. Location: Elkhart, Indiana All Job Posting Locations (Location) Elkhart Remote Type On-Site EEO Statement Boyd Corp is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Job DescriptionDescription: OPERATIONS TECHNICIAN Department: Grain Operations Supervises: NA Reports to: Operations Manager FLSA Status: Hourly, Non-Exempt This employee will conduct daily maintenance of the buildings and equipment at the facility. Manages the flow of grain dumped into the elevator and loaded out into trucks (and rail cars in some sites). Monitors grain in storage and maintains condition with aeration or turning to keep grain in good condition. At times, oversees the weighing and grading of grain before it is dumped into the grain elevator. Essential Duties and Responsibilities Performs all duties in a safe environmentally compliant manner. Demonstrates ability to work in a safety-conscious environment and follow all applicable safety and environmental regulations. Ensures that grain facilities are well maintained by adhering to a strict maintenance schedule. Follow established policies and procedures, along with proper communication when operating grain handling equipment. Repairs and rebuilds equipment to maintain its integrity and ensure its longevity. Cleans and prepares storage facilities including but not limited to grain bins and ground piles. If employed at a rail loading facility, this employee is responsible for loading trains when shipping grain to a customer facility. This includes opening heavy lids in preparation for loading rail cars and making sure bottom doors are closed and secure. Visually monitors grain and grain products for irregularities and takes proper action when discovered. Demonstrates the ability to recognize quality control issues with grain. Assists in the unloading of grain from trucks. Weighs/measures grain output on trucks. Possesses some mechanical aptitude, including the ability to recognize when equipment is not operating properly. Understand how to safely shut down and isolate equipment for maintenance using Lock Out - Tag Out procedures. Immediately report all accidents and/or injuries to your immediate supervisor or a person at the next level of supervision. Knows and understands the operation of the skid loader, front-end loader, yard tractor, and lawnmower, as well as equipment at specific locations as needed. Operates dryers when needed. Assumes other duties as assigned by supervisor. Other Duties and Responsibilities Assists in performing maintenance work as required. Performs housekeeping as related, including the cleanliness and orderliness of the grain handling area (tunnels, concrete grounds, grass areas, etc.) as well as areas within the site as delegated by the position supervisor or manager. Keeps current and maintains all training requirements for this position. Checks fire extinguishers monthly. Wear proper PPE, including a safety harness if off the ground or on a train. Reminds others as needed. Plan the day's work in advance. Trains new hires and seasonal employees as needed. Works as weighmaster when needed. Assumes other duties as assigned by supervisor. Characteristics and Attributes Works and promotes safety in all areas and is responsible for making sure fellow employees work safely. Must encourage safety and correct behavior when employees are working in an unsafe manner. Possesses problem-solving skills and mechanical aptitude. Maintains integrity and demonstrates dependability in conducting all aspects of work. Possesses the ability to multitask when needed. This position not only requires the need to conduct several duties, sometimes simultaneously but also to perform them in a timely and with confidence. Exhibits a style of setting one's own direction when needed. Sound independence is often required. Able to bring about great results from ordinary circumstances; solve problems and create opportunities in advance, often without supervision. Demonstrates a take charge and positive attitude. Treats customers with respect. Requirements: Supervisory Responsibilities No supervisory responsibilities. Education, Experience, and Licensure High School Education or equivalent needed for employment. Good people-orientation skills are important. Prior experience working in a grain facility is preferred. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Demonstrated ability to work in a team environment. Comfortable working at heights, such as walking on catwalks in high positions. Able to lift up to 75 pounds. Comfortable climbing fixed and stationary ladders. Able to shovel as needed. Has the ability to work in confined spaces and in a broad range of climate conditions. Comfortable utilizing mobile and stationary equipment and systems. Mental Demands This position requires that the employee have the ability to read, react, demonstrate common sense, and endure long hours during harvest. The person in this position must be mentally aware, especially when working long hours. This person must have the ability to respond to common inquiries, suggestions, and special requests. This employee must have the ability to effectively present information to the supervisor, customers, and fellow employees. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Office setting with general hours of 7:30 a.m. to 4:30 p.m. Some travel to a different site may be required. This position will incur multiple responsibilities. Confidentiality Employees in this position acknowledge that the information they acquire from Kokomo Grain or a related third party can be considered confidential. The above statements are intended to describe the general nature a level of work performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of employees so classified. Management retains the discretion to add or change the duties of the position at any time.

McCormick & Company, Inc., a global leader in the spice, flavor, and seasonings industry, is seeking a full-time Operations Technician. This new hire will work in the South Bend plant, located at 3425 Lathrop Street, South Bend, IN. The position title will report to a Production Team Manager. Shift: 3rd Shift - Monday to Friday 10:00pm to 6:30am - Overtime required as needed to include weekend work McCormick & Company, Incorporated is a global leader in flavor with approximately 14,000 employees worldwide. With over $6 billion in annual sales across 160 countries and territories, we manufacture, market, and distribute spices, seasoning mixes, condiments, and other flavorful products to the entire food industry including e-commerce, retail,food manufacturers and foodservice businesses. Our most popular brands include McCormick, French's, Frank's RedHot, Stubb's, OLD BAY, Lawry's, Zatarain's, Ducros, Vahiné, Cholula, Schwartz, Kamis, DaQiao, Club House, Aeroplane, and Gourmet Garden. Every day, no matter where or what you eat or drink, you can enjoy food flavored by McCormick. Our Purpose is "To Stand Together for the Future of Flavor and our Vision is "A World United by Flavor-where healthy, sustainable and delicious go hand in hand." As a company recognized for its exceptional commitment to employees, McCormick offers a wide variety of benefits, programs, and services. Benefits include, but are not limited to, tuition assistance, medical, dental, vision, disability, group life insurance, 401(k), profit sharing, paid holidays, and vacations. Role Summary: * Set up and start automatic filling and packaging equipment, load packaging and raw materials, and pack off finished product. * Weigh, blend, and cook product on all mix systems. * Follow detailed procedures and complete paperwork accurately to ensure safe, consistent, and quality product. * Make product changeovers, package size changes, minor and major repairs on all equipment. * Monitor operation of mixing equipment through visual checks of product and sensory evaluation of key component pieces. * Assemble component pieces of equipment belonging to continuous and pre-mix systems and their auxiliary components. * Document downtime and machine adjustments. * Understand and practice loss control of raw and packaging materials. * Work with Teams to identify process issues and improvement opportunities. * Actively promote safety and identify unsafe actions and conditions using a principle-based safety approach. * Be responsible for quality and quantity of production daily. * Obtain and return ingredients using a forklift. * Perform checks on critical timing of equipment. * Must be able to work unscheduled overtime. * Regular on-site attendance is an essential function of the job. * OT is required to include weekend work as well. * Perform other duties as required. McCormick & Company is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. As a general policy, McCormick does not offer employment visa sponsorships upon hire or in the future. WHY WORK AT MCCORMICK? United by flavor. Driven by results. As a McCormick employee you'll be empowered to focus on more than your individual responsibilities. You'll have the opportunity to be part of something bigger than yourself-to have a say in where the company is going and how it's growing. Between our passion for flavor, our 130-year history of leadership and integrity, the competitive and comprehensive benefits we offer, and our culture, which is built on respect and opportunities for growth, there are many reasons to join us at McCormick.

Sign on Bonus up to $3,000!! Reports to the Pharmacy Manager. Under the clinical supervision of a licensed pharmacist and in accordance with departmental policies, procedures and legal and regulatory requirements, and enters prescription data into the computer, verifies insurance on-line, fills pharmaceuticals for dispensing and ensures delivery of products and pharmaceutical supplies to patients in a retail environment which will include point of sale responsibilities. Maintains pharmacy working inventory. MISSION, VALUES and SERVICE GOALS * MISSION: We deliver outstanding care, inspire health, and connect with heart. * VALUES: Trust. Respect. Integrity. Compassion. * SERVICE GOALS: Personally connect. Keep everyone informed. Be on their team. Assists the pharmacist to prepare and dispense prescription and patient orders by: * Receiving customer and prescription information required to process new, refill and transfer prescriptions. * Performing computer entry of prescription information including but not limited to patient search, prescriber search, drug selection, prescription interpretation and entry, insurance verification and basic problem resolution. * Answering telephones and taking messages for patient prescription requests and related pharmacy business. * Managing and monitoring customer flow. * Providing excellent customer service to all patients and medical professionals via phone or in person. * Retrieving, counting, and bottling medications. * Dispensing filled prescriptions to customers and processing payments (i.e., cash/credit transactions). * Maintaining the dispensing robot. * Selecting from stock areas, medications for individual patients based on computer-generated information. * Selecting from stock areas, medications for newly received patient and refill prescriptions based on computer-generated labels and/or reports and verbal and written instructions. * Selecting and verifying accuracy of medications to be replaced in unit-based automated dispensing cabinets. * Generating reports, pick lists and labels as required. Maintains working inventory within established department guidelines by: * Reviewing stock levels and recording for order. * Removing stock from storage areas and replenishing active use areas. * Routinely checking storage areas for outdated product, removing from stock and placing in designated areas according to departmental policies. Performs other functions to maintain personal competence and contribute to the overall effectiveness of the department by: * Performing other job-related duties and projects as assigned. * Performing inspections of assigned patient care areas using printed guidelines. * Collecting data, conducting quality monitors and completing documentation as assigned. * Maintaining logs, records and other required documentation accurately, filing documents in appropriate locations. ORGANIZATIONAL RESPONSIBILITIES Associate complies with the following organizational requirements: * Attends and participates in department meetings and is accountable for all information shared. * Completes mandatory education, annual competencies and department specific education within established timeframes. * Completes annual employee health requirements within established timeframes. * Maintains license/certification, registration in good standing throughout fiscal year. * Direct patient care providers are required to maintain current BCLS (CPR), and other certifications as required by position/department. * Consistently utilizes appropriate universal precautions, protective equipment, and ergonomic techniques to protect patient and self. * Adheres to regulatory agency requirements, survey process and compliance. * Complies with established organization and department policies. * Available to work overtime in addition to working additional or other shifts and schedules when required. Commitment to Beacon's six-point Operating System, referred to as The Beacon Way: * Leverage innovation everywhere. * Cultivate human talent. * Embrace performance improvement. * Build greatness through accountability. * Use information to improve and advance. * Communicate clearly and continuously. Education and Experience * The knowledge, skills and abilities as indicated below are normally acquired through the successful completion of a high school diploma or equivalent and successful completion of a pharmacy technician training program approved by the State of Indiana. Current certification through the State of Indiana is required. Certification as a Certified Pharmacy Technician (CPhT) must be acquired within one year of licensure with the State of Indiana. A minimum of one year experience working as a Pharmacy Technician in a retail environment with duties to have included new prescription processing, POS and insurance verification is preferred. Active licensure through the State of Indiana and certification through the Pharmacy Technician Certification Board (PTCB) or Institute for the Certification of Pharmacy Technicians (ICPT) must be maintained throughout employment. Knowledge & Skills * Demonstrates effective communication skills necessary to follow verbal and written instructions, including the ability to understand technical and pharmaceutical terminology. * Demonstrates mathematical skills necessary to accurately compute fractions, ratios, percentages and totals. * Demonstrates knowledge and experience utilizing a POS (point-of-sale) system. * Demonstrates effective interpersonal skills necessary to consistently interact with patients, families, visitors and staff in a courteous manner; and to maintain positive working relationships. Working Conditions * Occasional exposure to potentially hazardous substances. * Works in a retail environment. Physical Demands * Requires physical ability and stamina (to lift and carry up to 50 pounds and to remain standing or walking for prolonged periods of time) to perform the essential functions of the position.

Located at bp's Whiting Refinery in Whiting, Indiana, the **Condition Monitoring Technician** is a member of the Rotating Equipment Engineering Group which consists of Rotating Equipment Engineers, Condition Monitoring Technicians and the Rotating Equipment Engineering Superintendent. The team is accountable for the Life Cycle Management of the refinery's rotating equipment, and jointly responsible, with the Rotating Equipment Engineer, for the development of Life Cycle Management Plans and reliability improvement strategies for assigned rotating equipment. **Key Accountabilities** + Responsible for the day to day health monitoring on assigned rotating equipment; work with Engineering, Operations and Maintenance to resolve identified issues. + Collection, maintenance, and analysis of equipment health monitoring information on assigned rotating equipment. + Maintenance of all vibration monitoring hardware and computer software on assigned rotating equipment. + Analyze vibration, bearing temperature and other rotating equipment health data and recommend solutions to resolve availability issues. + Ensure integrity of vibration trips to allow for safe operation. + Provide technical support and problem solving skills to address rotating equipment availability issues. + Shares, consults with other REG engineering personnel concerning best practices, troubleshooting, recommendations and QC. + Work jointly with Asset, Maintenance and Availability teams to improve equipment availability. + Interact with operations, maintenance, turnarounds and inspection personnel to resolve availability issues. + Support mechanical integrity activities for rotating equipment and compliance targets across the asset areas. + Conduct routine equipment health audits on assigned rotating equipment and drive resolution on identified deficiencies. + Jointly responsible, with the Rotating Equipment Engineer for the development of reliability improvement strategies for assigned rotating equipment. + Troubleshooting cylinder lubrication systems on critical reciprocating compressors. + Balancing of rotating equipment as needed. + Support and drive continual refreshing of technology to ensure monitoring equipment remains consistent with Industry standards, BP corporate specifications and Industry Best Practices. + Work with the Rotating Equipment Engineering Superintendent to pursue capital as needed for group equipment. + Performs facility lubrication oil testing program tasks per "WBU Rotating Equipment Lubrication Management Program" + Jointly responsible, with the Rotating Equipment Engineer, for the development of Life Cycle Management Plans for assigned rotating equipment. **Requirements:** + High School Diploma or equivalent + Proven experience in a petrochemical plant or refinery. **Desirable criteria:** + Machinist and/or Instrument tech experience preferred along with machinery monitoring experience. + Vibration Institute Technician Level I, Level II or other accredited vibration certifications (ISO 18436-1). **Why Join Our Team?** At bp, we provide an excellent working environment and employee benefits such as a great work-life balance, tremendous learning and development opportunities to craft your career path, life and health insurance, medical care package and many others! We support our people to learn and grow in a diverse and exciting environment! We believe that our team is strengthened by diversity. We are committed to crafting an inclusive environment in which everyone is respected and treated fairly. We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, perform crucial job functions, and receive other benefits and privileges of employment. Don't hesitate to get in touch with us to request any accommodations. **Travel Requirement** No travel is expected with this role **Relocation Assistance:** Relocation may be negotiable for this role **Remote Type:** This position is not available for remote working **Skills:** Agility core practices, Backlog Management, Contract Management, Control of Work, Cost-conscious decision-making, Decision Making, Digital Innovation, Equipment strategies, Facilitation, Influencing, Integrity Management, Maintenance and inspection build, Maintenance fundamentals, Maintenance OMS, Management of change, Measurement and metrics, Procedures and practices, Reliability processes and systems, Risk Based Inspection, Risk Management, Safety Leadership, Stakeholder Management, Working with contractors, Work Management **Legal Disclaimer:** We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status. Individuals with an accessibility need may request an adjustment/accommodation related to bp's recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process, please contact us . If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team. Want to Learn More? Watch A Day in the Life of a Crown Field Service Technician! click here . Job Posting External Job Duties Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. Perform all assigned planned maintenance on customer lift trucks. Maintain a service van and its inventory. Process paperwork after completion of each job. Minimum Qualifications Less than 2 years related experience High school diploma or equivalent Valid driver's license, good driving record, and ability to safely operate lift trucks. Preferred Qualifications Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. Good written/verbal communication and customer care skills. Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. Industry related training is preferred Ability to read and understand service manuals, plan, and follow-through Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. Crown also offers Service Technicians: Award-Winning Service Training Company Vehicle for Field Service Technicians Tool Insurance No Flat Rate 40 Hours Per Week plus Overtime Uniforms Specialty Tools Primarily 1st Shift Career Advancement Opportunities EOE Veterans/Disabilities

Requirements Key Responsibilities Operation of Automated Systems Start up, monitor, and shut down automated equipment in accordance with established procedures. Adjust machine settings to achieve the desired production output and product quality. Operate control systems, such as PLCs (Programmable Logic Controllers) and HMIs (Human-Machine Interfaces), to control automated processes. Monitoring and Troubleshooting Continuously monitor the performance of automated machinery, identifying and addressing any issues that arise. Perform basic troubleshooting and make minor repairs or adjustments to resolve equipment malfunctions. Notify maintenance technicians or engineers of any significant issues that require more advanced troubleshooting or repairs. Quality Control Conduct routine checks and inspections of products coming off the automated line to ensure they meet quality standards. Make adjustments to processes or equipment as needed to maintain quality and consistency. Record and report any deviations from quality standards. Documentation and Reporting Maintain accurate records of production outputs, machine settings, and any issues encountered during operation. Complete daily production logs and other required documentation. Report production data and machine performance to supervisors or engineers. Safety and Compliance Follow all safety protocols and ensure that automated equipment is operated in a safe manner. Conduct safety checks on equipment and report any hazards or potential risks. Comply with company policies and regulatory requirements related to production and safety. Collaboration and Communication Work closely with maintenance technicians, engineers, and other operators to ensure the smooth operation of automated systems. Provide feedback on equipment performance and suggest improvements to enhance productivity or quality. Communicate effectively with team members and supervisors regarding production status and any issues. Skills and Qualifications Technical Skills Basic understanding of automated systems, including PLCs, robotics, and sensors. Fanuc, Epson systems preferred Ability to read and interpret machine settings, production instructions, and control panels. Basic troubleshooting skills for addressing minor equipment malfunctions. Problem-Solving Skills Ability to quickly identify and resolve issues that arise during operation. Attention to detail to ensure quality standards are met and maintained. Physical Requirements Ability to stand for long periods and perform repetitive tasks. Ability to work in an industrial environment, which may include exposure to noise, dust, and varying temperatures. Communication and Collaboration Strong communication skills for reporting issues and collaborating with other team members. Ability to follow instructions and work as part of a team. Education and Experience High school diploma or equivalent is typically required. Additional technical training or certification in automation, manufacturing, or a related field is beneficial. 1-3 years of experience in a manufacturing or production environment, particularly in operating automated equipment. Familiarity with automation systems and controls is a plus. Work Environment The Automation Operator works in a manufacturing or industrial setting, often on a production floor with machinery and automated systems. The role may require shift work, including nights and weekends, depending on the production schedule.

Job Description The Technician is a heavy equipment mechanic that specializes in maintaining and repairing cranes. This position may perform routine maintenance, like lubricating parts, as well as fixing other problems when the crane malfunction. The Technician position work in a safety-first type of environment. HCSG is a 24/7 service company that requires technicians to be available on-call and provide after hour or even weekend services as required due to customer needs. DUTIES & RESPONSIBILITIES Must be able to be on-call and provide after hour services as required. Troubleshooting, repairing, inspecting, and upgrading industrial hoists and cranes in the field at customer locations. Perform OSHA required hoist and crane inspections and generating inspection reports and repair orders. Communicate with the Service Manager and Branch Manager during the day so that work can be scheduled and completed on a daily basis. Operate tools, equipment, and vehicles in a safe and responsible manner. Notify immediate supervisor of any deficiencies. Maintain the ability to work with others in team environment. Attend company provided trainings and seminars as required. Participate in HCSG 5 Marks program Other duties as assigned PHYSICAL DEMANDS The work is labor intensive. Must be able to lift up to 50lbs on a daily basis. Must be able to lift up to 100lbs on a rare basis. This position requires 90% of frequent climbing, balancing, stooping/crouching, overhead reaching, bending, squatting and prolonged standing and sitting. It requires occasional pushing, pulling, kneeling, and crawling. The position also involves great hand and eye coordination. Heights exceeding over 50 feet from time to time are normal to incur on a daily basis to maintain a crane. Employee will be required to travel from time to time (20 50%) and must be willing to work various shifts to accommodate needs of HCSG branches and customers. This includes on-call and overtime. Travel out of town may be required at the discretion of the company. WORK ENVIRONMENT Work is normally performed inside or outside (pending customer requirements) with varying degrees of extreme hot and cold temperatures depending on the weather. During summer months, temperatures can exceed 120 degrees. This position will be frequently exposed to noise, heights, fumes, dust, and odors. MINIMUM QUALIFICATIONS 0 - 2 years of crane experience in an industrial facility Must have a valid drivers license and acceptable driving record Must always commit to working and driving safely Must be willing to work off the ground at various heights Must have basic computer skills Must be able to communicate well with others and work independently or as a team PREFERRED QUALIFICATIONS Vocational/Technical training certificate Some electrical and mechanical knowledge Knowledge of hand tools and/or possess hand tools Must be able to pass a pre-employment drug test and background (DISA) and submit to random and annual drug testing as required.

Job Description Experienced Low Voltage Technician - Join the JSET Automated Technologies Team JSET Automated Technologies is seeking a skilled Low Voltage Technician to join our team! We specialize in low-voltage controls and communications, focusing on the installation and commissioning of mechanical and electrical building management systems for commercial and industrial projects. This is an excellent opportunity for those with established experience in low-voltage work, looking to further their career with a growing company. Applicants must be authorized to work in the United States. We are unable to sponsor or take over sponsorship of employment visas at this time. Position: Low Voltage Technician As a Low Voltage Technician at JSET, you will be responsible for executing complex low-voltage installations and ensuring systems are properly configured, tested, and commissioned. Key responsibilities include: Installing and connecting low-voltage electrical systems, including wiring and cables for data, telecommunications, and control systems. Configuring systems based on blueprints, schematics, and other technical guides. Installing and terminating various types of control wiring, including CAT5/6, coaxial, and fiber optics. Installing electrical conduit, raceways, and enclosures, while ensuring compliance with industry standards. Troubleshooting, testing, and commissioning of low-voltage systems to ensure optimal performance. Collaborating with other team members and trades to ensure successful project completion. Performing overhead work and operating lifts safely to install equipment and cables. What You Need to Succeed: Minimum 2-3 years of experience in low-voltage systems installation, specifically with structured cabling and related systems. In-depth knowledge of low-voltage electrical systems, including CAT5/6, coaxial, fiber optic cabling, and control wiring. Proficiency in reading and interpreting blueprints, schematics, and wiring diagrams. Strong experience with terminating and testing cables (fiber optics and copper). Familiarity with industry standards and codes (EIA, TIA, BICSI, NEC) and a commitment to maintaining compliance. Comfort with overhead installations and working at heights. Strong troubleshooting and problem-solving skills to ensure high-quality work. Valid driver's license and reliable transportation. Ability to lift and carry up to 60 pounds independently. Why Work With Us? Career Advancement: We provide opportunities for ongoing training and internal promotions. Comprehensive Benefits: Medical, dental, vision, and 401(k) with company match. Competitive Pay: Compensation based on experience. Dynamic Work Environment: Collaborate with a dedicated, skilled team on challenging and rewarding projects. Join a team that values expertise and experience. Apply now if you're ready to take the next step in your career as a Low Voltage Technician with JSET Automated Technologies! As a condition of employment, all employees must complete a background and drug screening

Job Description Researches, develops, designs, and tests electrical components, equipment, and systems related to continuous steel casting, in addition to installing and maintaining electrical test systems used during the repair/refurbishment of customer products and parts. Duties and Responsibilities Builds, calibrates, and repairs electrical instruments or electrical test equipment for shop use during machine repairs. Designs and aids shop personnel in the fabrication of test control apparatus and equipment, and helps determine methods, procedures, and conditions for testing products. Provides support and technical advice during field installations and/or repairs. Uses computer assisted engineering software and equipment to perform engineering tasks. Uses hand tools and electrical testing equipment to install and verify customer products. Uses soldering tools in the assembly/disassembly of customer products. Follows electrical schema and blueprints closely to ensure all products adhere to functional specifications and customer requirements. Job Qualifications/Educational Requirements Associate's degree in EE/ EET/ Automation with 2yrs. experience Bachelor's Degree in EE/ EET/ Automation (Entry Level) Strong understanding of electrical diagrams and blueprints Strong understanding of AC/DC electrical theory, transducer theory, electric motors, thermocouples, accelerometers, microcontrollers, and various remote I/O systems (Profibus, CAN bus, RJ-45, Serial, etc.) Strong troubleshooting/diagnostic abilities Basic understanding of mathematics and trigonometric functions Basic understanding of engineering design software (AutoCAD) Basic understanding of Variable Frequency Drives, and PLCs (Allen Bradley, GE Fanuc) Basic understanding of mechanical concepts What we offer: Competitive compensation, Medical/Dental/Vision coverage after 30days Paid vacation and holiday time 401K with a company match Training, a tuition reimbursement program Company supplied PPE What we do: SMS group is the leading partner in the world of metals. We are an original equipment supplier offering comprehensive maintenance and spare part services for metals production, continuous casting and rolling (flat and long products), tubes, welded pipes, forging, non-ferrous technology, and heat treatment plants - all from a single source. SMS group Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, religion, national origin, age, sexual orientation, disability, veteran status, gender identity or other categories protected by law. Employment is contingent upon successful completion of a drug screen and physical capacity profile test.

Imaging Service Engineers A well-known large healthcare corporation is hiring for Imaging Service Engineers. Responsibilities include: Responsible for maintenance, repair and servicing of specialized equipment, performing corrective and planned maintenance Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules Perform emergency service and repair of all radiological or general medical equipment. Orders parts and supplies and deal with vendors Provides assistance and training to Biomedical Equipment Techs I and II as assigned. Requirements Atleast 3 years relevant experience Specialized training by manufacturer or third party equipment repair If you are interested in the above opportunity please apply. Only relevant candidates will be contacted. workforcesolutionsvirensglobal... Locations: America, Europe, Asia & Australia

PLANT BED MAINTENANCE | HORTICULTURE TECHNICIANS AND CREW MEMBERS WE ARE CREATING LANDSCAPES FOR LIFE! CELEBRATING 50 YEARS! $1,000 "SIGN-ON" BONUS FOR NEW, SEASON-LONG, FULL-TIME HIRES JOIN OUR TEAM! We take caring for our team seriously. Very seriously! When we say caring is in our nature, it doesn't just refer to our clients and their properties. Challenge yourself at an a ward-winning company with many career paths to choose from and an impeccable safety record. Get rewarded with industry-leading compensation, retirement savings plan, sign-on bonus, year-end bonus, and referral bonus program. Have fun in a great team culture, outside, with team events, BBQs, and family gatherings. Strong faith-based team core values, and also a 100% tobacco-free and alcohol-free environment. Strong career growth opportunities in a growing company. Who we are: Creative Landscaping & Design is an industry-leading, professional outdoor landscaping firm specializing in custom landscape design, installation, and ongoing landscape services. We have been creating and maintaining inspiring and sophisticated outdoor spaces for 50 years throughout Southwest Michigan. We are located near Lake Michigan in beautiful St. Joseph, Michigan. Skills Required: Love for plants and the outdoors. Great positive attitude. Willingness to learn, grow, and collaborate with a broader team of professionals. Ability to work with other team members in a professional, friendly, and courteous manner. Strong work ethic and desire to grow. Clean driving record. If you have a resume, please include it with your application. Job Description: Being part of a team dedicated to keeping the property plant beds beautiful and functional for customers at a variety of properties, weekly or bi-weekly. Be a part of caring for beautiful properties with beautiful scenery. Responsible for caring for clients' properties by maintaining custom gardens and flower beds with the utmost care. Entails weekly/bi-weekly gardening techniques, including pruning, hand weeding, and garden spraying. You will utilize a variety of landscape maintenance tools (e.g., hand pruner, hedge trimmer, leaf blower, garden sprayer, etc.). Be able and willing to complete clean-ups on properties in the fall and spring. This is a seasonal role, running from March through November. This is a great role for someone who loves being outdoors and caring for plants, someone looking to get started in the landscaping industry, or someone close to retirement. This is a full-time position for the most part, Monday through Friday. There is plenty of future growth potential across several departments if desired! What We Offer: Industry-leading pay and benefits. Best-in-class equipment and facilities. Be part of an exciting, growing company of professionals. Retirement with 3% company match. Paid holidays. Time off during the winter. Family-friendly work schedules during the week - we do not actively work on weekends. Paid training and development opportunities. Career development in business and leadership. Work variety - both in the shop and office. Fun times, great culture, strong core values, and hard work. Beautiful client properties to take pride in building and servicing. 100% tobacco-free and alcohol-free environment. Faith-based environment and core values. $1,000 "Sign-On" Bonus Details: The "Sign-On" Bonus is broken down into three payments during the year: 1/3 after the first week of hire (must be employed and on payroll at that time). 1/3 end of June if on payroll (must be employed and on payroll at that time). 1/3 end of season (mid-December) if on payroll (must be employed and on payroll at that time). Contact: You can apply or contact us on our careers page at ******************************* COME GROW WITH US! Powered by JazzHR LLjUFR9Feg

Job Description Electronic Technician II - 2nd Shift Who we are: Atkore is forging a future where our employees, customers, suppliers, shareholders, and communities are building better together - a future focused on serving the customer and powering and protecting the world. With a global network of manufacturing and distribution facilities, Atkore is a leading provider of electrical, safety and infrastructure solutions. Who we are looking for: We are currently looking for an Electronic Technician II based out of Harvey, Illinois. Reporting to the Electronic Technician Manager, you will be responsible for maintaining and troubleshooting problems with the electrical equipment, wiring and resources in the tube manufacturing operation. The ideal candidate will have at least a bachelor's degree or expert certification in an electrical field with 5+ years of electronic troubleshooting experience in an industrial environment. Experience in lean manufacturing or business system-based company is a plus. What you'll do: Implement solutions to decrease production downtime, through equipment enhancement projects and preventive maintenance procedures. Train and mentor electronic technicians with an emphasis on teamwork, continuous improvement and accomplishment of safety, quality, delivery, and cost goals. Maintaining and troubleshoot problems with the electrical equipment, wiring and resources in the tube manufacturing operation. Work with maintenance and production personnel in analyzing and troubleshooting equipment failures. Assist with equipment installation. Provide procedural improvements. All other duties assigned by your supervisor. Participate in Lean Manufacturing activities and promotes the plant Lean culture. What you'll bring: 5+ years of electronic troubleshooting experience in an industrial, automotive or manufacturing environment required. Tube mill or steel industry experience strongly preferred. Ability to troubleshoot and repair down to component level required. Knowledge in 3-phase power systems, AC/DC drives, PLC/HMI programming. Knowledge in induction heating and welding equipment, flying cut-offs, Servo Drive Systems, automated packaging systems and/or robotics encouraged to apply. Knowledge of A/B and Siemens PLC's are welcomed to apply. All associates must embrace and foster an environment that supports our core values of Integrity, Respect, Excellence, Teamwork and Accountability. Within 3 months, you'll: Complete your Atkore Immersion Program Understand how your job will help deliver Atkore's Business System through Lean Daily Management and the Strategy Deployment Process. Gain an understanding of your team and areas you support. Within 6 months, you'll: Gain an understanding of the current training materials and procedures your team owns. Be able to resolve any issues quickly and safely. Partner with Operations Manager and Engineering to start identifying short- and long-term process improvement ideas. Identify ways to strengthen the team's commitment to Atkore's core values of Accountability, Teamwork, Integrity, Respect and Excellence. Within 12 months, you'll: Create, update, and share training materials and documentation. Have meaningful performance conversations with team and operators in areas supported. Atkore is a five-time Great Place to Work© certified company and a four-time Top Workplaces USA award winner! We're committed to creating an engaged, aligned workforce driven by a collaborative culture. Our team strives for breakthrough results and stays focused on being standout leaders. We consistently live the Atkore mission, strategic priorities, and behaviors consistent with our core values. Join our team and align yourself with an industry leader! As of the date of this posting, a good faith estimate of the current pay for this position is $74,800- $102,850. Placement in the range depends on several factors including, but not limited to, specific competencies, relevant education, qualifications, certifications, relevant experience, skills, seniority, performance, shift, travel requirements, and business or organizational needs and may change over time. Other compensation may include, but not limited to, overtime, shift differentials, bonuses, commissions, stock, and other incentives. Benefits available include: Medical, vision, and dental insurance Life insurance Short-term and long-term disability insurance 401k Paid Time Off Paid holidays Any leave required under federal, state, or local law Benefits are subject to vesting and eligibility requirements. Applications are being accepted on an ongoing basis. #LI-KB1

Great Pay & Benefits Package! World Class Equipment, Technology & Training Target Pay of $35.00 / hour Benefits -- Medical, vision and dental starting Day 1! Company-provided retirement benefits Paid time off Company provided i-pad, i-phone, uniforms, PPE, and work boot allowance Ongoing training and career growth opportunities Are you ready to join a winning team? Pepsi Beverages North America (PBNA) is PepsiCo's beverage manufacturing, sales, and distribution operating unit. Now is the time to explore the opportunities of PBNA: what makes you unique makes us better. Fleet Mechanics play a key role in the success of our business by ensuring the reliability of our fleet and supporting the of safety our Drivers. Together we perform with purpose! What's different about Fleet Mechanic positions at PBNA? Great benefits package, pay, and incentives (including work boot allowance, uniforms, company provided PPE, and more!) World class tooling and ergonomics Fast-paced environment where you can work independently while still receiving coaching and direction when needed Task variety with opportunities to work on a wide range of equipment and repairs Ongoing training to help you grow your skills and advance your career Team culture that supports knowledge sharing and growth Clean facilities and a commitment to safety first Here is what it's like to be a Fleet Mechanic with PBNA: View our Job Preview Video As an experienced Fleet Mechanic, here's a bit more about what your job will be. Day to day you will: Work with a high degree of independence while performing PMs and repairs Utilize leading edge technology and programs including PM using voice application, Noregon diagnostics, Uptake predictive analytics, TAAS, and more! Leverage and grow your skills working on Pepsi's diverse fleet equipment including automobiles, trucks (light and heavy), vans and forklifts Perform advanced diagnostics across all OE platforms (Volvo, International, Freightliner, Maxon, electrical vehicles, Material Handling Equipment and more) Perform high level repairs such as, but not limited to, engine and driveline, after treatment and emissions, and safety systems Adapt and build repair and maintenance capability for alternative fuel applications such as electric vehicle, CNG, and B100 Diagnose failures of vehicles and disassemble, repair and reassemble parts as necessary Maintain documentation and records such as vehicle records and pre-trip checklists Answer service calls Support Pepsi's strong safety culture by adhering to all safety standards and procedures Be part of the team that maintains one of the largest fleets in North America