Technician jobs in Munster, IN - 7,220 jobs

Controls Technician - Chicago Heights, IL Pay: $38 - $40/hr Shift: 1st Shift | Monday - Friday | 8a-5p We're looking for a skilled Controls Technician to support, maintain, and improve all plant electrical and control systems-including electrical, pneumatic, hydraulic, mechanical, and network subsystems. In this role, you'll act as a technical subject-matter expert, providing troubleshooting support, leading root-cause analysis, training maintenance techs across all shifts, and ensuring smooth operation of all production and facility systems. You'll work closely with the Maintenance Supervisor, Planner, and Manager to keep production on track, equipment running safely, and documentation up to date. What You'll Do Core Responsibilities Inspect, troubleshoot, repair, and maintain food processing and packaging equipment. Perform corrective, preventive, and scheduled maintenance on a wide variety of automated equipment. Diagnose and repair mechanical, electrical, pneumatic, hydraulic, and control-system issues. Install, program, and troubleshoot PLCs, HMIs, servo drives, VFDs, and related systems. Support and coordinate mechanical technicians during breakdowns and major repairs. Maintain accurate documentation on all controls systems-including hardware, software, and changes. Work safely using proper PPE and adhere to all HACCP, Allergen, Food Defense, and GMP policies. Perform inspections and repairs while equipment is operating on a live production schedule. Lead troubleshooting efforts during downtime and expedite equipment recovery. Maintain secondary plant systems (steam, chilled water, pneumatics, HVAC, electrical distribution, refrigeration, etc.). Write and update job procedures and frequencies within the CMMS (SAP). Train technicians on PLC/VFD/HMI troubleshooting using laptops and plant software tools. Occasionally travel for training, equipment work, or parts procurement. Keep the work area clean and report any potential contamination or unsafe conditions immediately. Key Technical Skills Skilled electrical troubleshooting (120V-480V). Strong understanding of PLC programming (RSLogix, FactoryTalk View, ladder logic). Experience with servo systems, VFDs, motor controls, HMIs, pneumatics, and hydraulics. Ability to read and interpret P&IDs, electrical single-line diagrams, loop drawings, termination diagrams, and mechanical layouts. Experience maintaining batching or continuous process systems and their networks. Ability to perform mechanical, plumbing, and instrumentation work at a semi-skilled level. Qualifications Previous experience as a Controls Technician, Automation Technician, or similar role in manufacturing (food industry experience preferred). Strong troubleshooting aptitude-electrical, mechanical, and automation. Ability to work in a fast-paced production environment under pressure. Excellent communication skills and teamwork mindset. Regular, predictable attendance. CMMS experience (SAP preferred): Create work order notifications Enter labor time Provide feedback for procedure updates Write job-specific procedures and task frequencies Apply now for immediate consideration for this Controls Tech position in Chicago Heights, IL . We Look forward to connecting with you!

About the Company HSG Tech Inc. is an American Subsidiary of HSG Laser who is a fast-growing supplier in the global metal forming solution industry. We believe intelligent manufacturing changes future. Customers in 100+ countries have used and recognized our equipment and service. Please visit the web site for details about HSG: **************** About the Role The Service Engineer position is the primary point of contact responsible for training, installation and maintenance of all HSG tech machinery in our Chicago showcase space and equipment purchased by HSG Tech customers in the US region. Reporting directly to the Service Manager in the US, this position will manage technical issues, maintain customer satisfaction, provide monthly maintenance support, promote value add-on services and provide training support. Business travel will be a requirement for this position. Responsibilities Provide key objective management (proper machinery installation, proper accessory management and proper understanding of service data) Optimize work order organization, safe tool use and customer data reporting. Demonstrate understanding of expense reimbursement documentation and customer service evaluations Partner with internal Sales, Marketing, Finance, Customer Service and R&D teams to support stakeholder objectives On-time completion of equipment installation, commission and maintenance tasks while following the company's strict safety and quality guidelines Analyze and find root cause of maintenance impediments, debug system errors and propose system improvements. Participate and prepare company held trainings regarding technical process, company regulation and technician job duties. Conduct customer visits monthly for routine service maintenance while promoting related value add-on services. Provide one-to-one training and guidance for new hired service team members. Qualifications Two years of working experience in related industry (Fiber Laser experience highly preferred) Technical know-how: installation, debugging and maintenance on 6KW equipment Comprehension of circuit diagrams Familiar with CAD or SOLIDWORKS design software Familiar with mechanical principles Detail & deadline-oriented; well organized Excellent verbal and written communication skills Good interpersonal skills; ability to interact with staff across matrix partners Electrician's certification Fitter's certification Job level and pay is dependent on experience. Pay ranges and level progressions: Service Technician ($29-35 hourly) Service Engineer ($36-41 hourly) Senior Service Engineer ($42-48 hourly) HSG is committed to ensuring equal employment opportunities to all qualified persons without regard to race (including associated hairstyles), color, religion, sex, gender identity, sexual orientation, national origin, ancestry, citizenship status, age, marital status, genetic information, military status, unfavorable discharge from military service, order of protection status, pregnancy, arrest record, disability, or any other status protected by applicable law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. HSG participates in E-Verify and conducts pre-employment drug testing and background checks as part of our hiring process.

**Our promise to you:** Joining UChicago Medicine AdventHealth is about being part of something bigger. It's about belonging to a community that believes in the wholeness of each person, and serves to uplift others in body, mind and spirit. UChicago Medicine AdventHealth is a place where you can thrive professionally, and grow spiritually, by Extending the Healing Ministry of Christ. Where you will be valued for who you are and the unique experiences you bring to our purpose-minded team. All while understanding that **together** we are even better. **All the benefits and perks you need for you and your family:** + Benefits from Day One: Medical, Dental, Vision Insurance, Life Insurance, Disability Insurance + Paid Time Off from Day One + 403-B Retirement Plan + 4 Weeks 100% Paid Parental Leave + Career Development + Whole Person Well-being Resources + Mental Health Resources and Support + Pet Benefits **Schedule:** Full time **Shift:** Day (United States of America) **Address:** 5101 WILLOW SPRINGS RD **City:** LA GRANGE **State:** Illinois **Postal Code:** 60525 **Job Description:** + Checks supplies and equipment needed for surgical procedures. Scrubs, gowns, and gloves for surgical procedures. + Sets up sterile table with instruments, supplies, equipment, and medications/solutions needed for procedures, displaying knowledge of procedure and patient positioning. + Performs appropriate counts with circulator prior to the operation and before the incision is closed. + Gowns and gloves surgeon and assistants. + Assists other team members with terminal cleaning of the room and prepping for the next patient. **The expertise and experiences you'll need to succeed:** **QUALIFICATION REQUIREMENTS:** Associate, High School Grad or Equiv (Required), Technical/Vocational School (Required) Basic Life Support - CPR Cert (BLS) - RQI Resuscitation Quality Improvement, State Certified Surgical Technologist (CST) - EV Accredited Issuing Body, Technician in Surgery - Certified (NTSC) - EV Accredited Issuing Body **Pay Range:** $25.65 - $52.00 _This facility is an equal opportunity employer and complies with federal, state and local anti-discrimination laws, regulations and ordinances._ **Category:** Surgery Services **Organization:** UChicago Medicine AdventHealth La Grange **Schedule:** Full time **Shift:** Day **Req ID:** 150662033

General inspection, calibration, troubleshooting, repair, test, and maintenance of all types of HVAC, electrical, lighting, fire, life, safety, and facility systems. Provide additional facility maintenance services including carpentry, plumbing, painting, snow removal, and CMMS system data entry to maintain client's building infrastructure and grounds in a commercial office facility. SUMMARY OF ESSENTIAL JOB FUNCTIONS AND RESPONSIBILITIES: Inspect, calibrate, maintain, troubleshoot, test, and repair all types of facility systems including HVAC, electrical, lighting, fire, life, safety, boilers, refrigeration units, compressors, motors and pumps and all associated controls and provide facility maintenance services including carpentry, plumbing, painting, landscaping and snow removal to maintain client's building infrastructure and grounds. Attend and/or participate in safety training per C&W SERVICES policy Perform routine inspection, preventive maintenance, calibration, functional and operational testing of facility systems and equipment. Utilize CMMS computer system to document tasks performed and maintain equipment histories including parts replaced, hours worked, time to respond, and time to complete. Responsible for completing and data input for all assigned work orders (both corrective and PM) in a timely manner. Maintain equipment, tools, and work areas in a clean, safe and orderly manner. Utilize and have a general understanding of national and local codes for equipment repair. Perform all work in accordance with OSHA, state and municipal requirements and C&W SERVICES safety policies. Perform quality work and regularly communicate repair status of devices and systems to supervisor/Manager. Must be able to work with informal and formal teams, with other employees and customer representatives from various departments demonstrating a professional demeanor at all times. May be required to work with and coordinate activities of other vendors including specialists Perform all other tasks as assigned by supervisor/Manager in response to the needs of the client Perform daily survey of buildings to identify repair and preventive maintenance tasks. Report to supervisor/Manager on a regular basis (daily/weekly) on conditions relative to general operations. Responsible for participating, seeking and coordinating training and continued professional development in the areas of advancing technology, safety, and general skill improvement. Available for ON CALL duty on nights, weekends and holidays to address emergencies Possible flexible hours to accommodate client needs Pay/Work Hours/Location: Up to $30 per hour 1st Shift Elmwood, IL SUPERVISORY RESPONSIBILITIES, if any: Not applicable to this position PERFORMANCE GOALS: Safety - follow C&W SERVICES safety policy and participate in all required training and related programs Cost - assist account leadership to meet financial targets Quality - meet goals as outlined in the SLA's for work completion, callbacks and customer service issues Delivery - follow work order and services delivery processes QUALIFICATIONS: To perform this position successfully, an individual must be able to perform each job duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. Good general working knowledge of all trades Proven mechanical ability and aptitude. Good computer skills are required; operating knowledge and trouble-shooting of equipment via Building Management System preferred. Proven ability to work cooperatively with others. Demonstrates attention to detail Understands business implications and decisions Develops and implements cost saving measures Conserves organizational resources 2-5 years related experience and/or training at a semi-skilled level of experience of general maintenance in a commercial facility setting or equivalent combination of education and experience. Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished by supervisor/Manager in written, oral, diagram or schedule form Increase knowledge and operation of specialized equipment through study of all manufacturer manuals and installer instructions. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to perform the following physical activities during a normal work-day: stand, walk, sit, use hands to finger, handle or feel, reach with hands and arms, stoop, kneel, crouch or crawl, climb or balance, talk, hear and smell. Must be able to lift up to 75 pounds 1/3 of time at work. Must have the following vision requirement: close vision, distance vision, color vision, and depth perception WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to perform duties under the following environmental conditions Work near moving mechanical parts, work in high, precarious places with potential exposure to work environments containing fumes or airborne particles, toxic or caustic chemicals, outdoor weather conditions, extreme cold and heat (non-weather), risk of electrical shock and occasional loud noise

A leading biopharmaceutical company based in Chicago seeks a motivated Scientist to lead CMC drug product process development for parenteral products. The successful candidate will design and execute lab studies, support drug product manufacture, and collaborate across multiple functions for both clinical and commercial products. Extensive experience in manufacturing processes and strong laboratory skills are essential. Join us in advancing health solutions that impact lives. #J-18808-Ljbffr

LHH Recruitment Solutions has partnered with a growing organization, and they are seeking a motivated Maintenance Mechanic / Field Technician - Multi-Site Plastics Manufacturing to join their team. This is a unique opportunity for a hands-on professional who enjoys traveling and solving complex challenges in state-of-the-art production facilities. Why Consider This Opportunity? Travel & Variety: Support multiple advanced plastics plants across the U.S. and Canada. Approximately 70% travel-perfect for those who love new challenges and environments. Growth & Innovation: Work alongside senior engineering and maintenance teams, contributing to continuous improvement and automation projects. Impact: Play a key role in ensuring operational excellence, safety, and reliability in high-volume manufacturing settings. Key Responsibilities: Troubleshoot, repair, and maintain hydraulic, pneumatic, and electrical systems (including 480V 3-phase). Support installation, upgrades, and relocation of production equipment. Collaborate with engineering and plant maintenance teams to deliver projects on time and within budget. Apply TPM (Total Productive Maintenance) methodologies to drive efficiency and minimize downtime. Identify and implement system improvements to optimize automation and production performance. Maintain accurate project documentation and technical records. Ensure strict adherence to safety protocols during all on-site activities. Qualifications and Skills: Bachelor's Degree preferred; relevant certifications or technical degrees considered. 3+ years as a maintenance mechanic or field technician experience. Proven expertise in hydraulics-especially in plastic blow molding or injection molding environments. Exposure to PLCs (Programmable Logic Controllers). Ability to read and interpret technical diagrams, schematics, and manuals. Familiarity with AutoCAD and basic drafting is a plus. Willingness and ability to travel up to 70% of the time to support multiple plant locations. Hands-on knowledge of Total Productive Maintenance practices. Compensation Range: $75,000 - $115,000 Benefits Offered: 3 weeks of vacation, paid sick leave where applicable by state law, Medical Insurance, Dental Insurance Vision Insurance, 401K, and Life Insurance. If you are a passionate Maintenance Mechanic / Field Technician looking for a new and rewarding career, please apply today! You don't want to miss out on this opportunity! LHH is a leader in permanent recruitment-and in the placement of top talent. Our areas of specialty include office administration, customer service, human resources, engineering, and supply chain and logistics. Please feel to check us out and apply for other opportunities if this role isn't a perfect match. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit **************************************

We are developing computer vision technology which performs in-situ monitoring for industrial 3D printing (additive manufacturing, AM). This technology dramatically changes the metal AM industry by providing immediate component certification and early cancellation of defective builds. Our vision is to provide the additive manufacturing industry with a trusted method to validate part quality in real time. The Phase3D headquarters is in Chicago, located 5 miles from the Chicago Loop. We work closely with federal scientists and engineers to develop machine vision technology for additive manufacturing (camera and software based). We have established research partnerships with multiple national laboratories, US departments, NASA, and research institutions. About Phase3D Culture Phase3D is currently a small team, comprised of independent thinkers, working to solve challenges in software development, data analysis, mechatronics, electrical engineering, and computer engineering. We are a cross-disciplined group and are excited to be pioneers in the rapidly evolving field of artificial intelligence and machine learning for 3D printing. This is a fast-paced, startup work environment, but with the resources and facilities of a US national Laboratory. This means a lot of variability of workflow and responsibilities, with an emphasis on creative problem solving. You will have the chance to be a part of a team making headlines in the 3D printing world. About the Role: We are looking for a candidate with a well-rounded set of skills to support Phase3D's product deployment, customer sales, and product development. This role will incorporate a mix of fast paced engineering, sales, and operations work, including process development, data analysis, and travel to 3D printing sites such as NASA, the US Air Force, DOE national labs. This role will manage strategic customers and work on projects to mature the readiness level of Phase3D's products. About the Role We are looking for a well-rounded, hands-on candidate to support the production and deployment of Phase3D's in-situ monitoring systems for additive manufacturing. This role combines production, field service, and operations work. Perfect for someone who enjoys building hardware, traveling to customer sites, and seeing the direct impact of their work in the field. The Engineering Technician will assemble, pack, ship, test, and help install Phase3D products. You will be responsible for the physical build and validation of electrical assemblies, assisting with internal product testing, managing inventory, and documenting the processes that keep production and installations efficient and repeatable. This position provides the opportunity to work side-by-side with engineers, contribute directly to the company's growth, and represent Phase3D during customer installations and training sessions across the country. Responsibilities Production and Assembly (30%) · Build, pack, ship, and test production electrical assemblies · Cut, strip, solder, crimp, and assemble wiring harnesses and components · Use standard hand and power tools to complete builds safely and efficiently · Perform internal testing of systems and subassemblies before shipment · Maintain production quality through documentation and process feedback Field Service and Installation (50% Enforced) · Travel to customer sites for system installation, setup, and training · Perform hands-on troubleshooting, calibration, and integration with customer hardware · Communicate directly with customers to ensure smooth deployment and operation · Support the engineering team by identifying field issues and recommending improvements Operations Support (20%) · Assist in inventory management, including part tracking and material readiness · Create and update work instructions, installation guides, and process documentation · Collaborate cross-functionally with engineering, manufacturing, and quality teams · Support lean and continuous improvement initiatives within operations Minimum Education / Certification Requirements · Must be U.S. Citizen · High school diploma or equivalent required; technical certificate or associate degree preferred · Engineering mindset, willing to learn new disciplines · Ability to read wiring diagrams, schematics, and technical documentation · Strong troubleshooting and logical problem-solving skills · Excellent communication and organizational abilities · Willingness and ability to travel domestically up to 50% of the time Desired Job Requirements · 2-4 years of experience in production, electrical assembly, or field service roles · Experience assembling or testing electromechanical systems · Familiarity with manufacturing environments and basic inventory control · Exposure to lean production principles or continuous improvement initiatives · Ability to work independently while coordinating with remote teams · Comfortable with variability in tasks and changing project priorities · Enthusiastic about working in a fast-paced startup environment with a small, motivated team Work Location Hybrid and flexible options are available, but the role requires presence in Chicago, IL for production work and team collaboration. Travel to customer sites across the U.S. will be required. Benefits · Competitive Salary: $60,000 - $80,000 depending on experience · PTO program · Mentorship and professional growth opportunities · Healthcare coverage premium First Six Months: Within the first six months, the candidate will be onboarded, become AM metals customer segment literate, and exercise mastery over the commercial value-add and technical specifications of the products. These goals can be accomplished via 3 main stages. Month 1 · Understand Phase3D core technologies, technology roadmap, and business strategy o Complete one calibration of the Fringe system at a development partner's laboratory o Install updated metal fixtures in at least 1 partner site o Supervise two biweekly tests, supporting developers in troubleshooting tasks · Socialize with the cross-functional team, understanding each person's area of expertise and skills spanning the hardware, software, and product installation activities o Take the initiative to schedule a 15 minute meeting with each member of the Phase3D team, including our digital fringe projection expert and our company coach · Understand how Phase3D monitoring provides value to research, additive equipment manufacturers, and contract manufacturers o Schedule a meeting with Sales to receive a full presentation as if you were a customer · Get hands on with the technology, learn how to install and calibrate the system, learn how heightmap readings predict and identify build defects o Create a report for a chosen build, identifying interesting defect areas and reporting on them. Months 2-3 · Taking initiative to fill gaps in operations that you identify o Lead all biweekly test coordination, successfully run 4 biweekly tests and write reports on the results for the slack channel · Planning trips and leading system installations at customer facilities o Lead the trip planning process for at least 1 installation · Build sensor packages and assemble systems with minimal supervision o Make 4 trigger cables and maintain stock of 4 trigger cables o Build and maintain stock of 4 Fringe kits · Provide customer feedback to the team for continuous product improvement. o Make a report on identified areas of weakness in our team/workflow, with suggested improvements. Take charge on implementation Months 3-6 · Contribute to Phase3D' growth through consistently delivering outstanding products and innovations. o Take charge of 3 strategic initiatives within the company, either from the existing list or create your own based on identified gaps in operations.

As a Maintenance Technician, you'll be responsible for completing work orders and assisting with the day-to-day upkeep of our apartment community. You'll work directly with residents to resolve maintenance requests submitted through AppFolio, ensuring repairs are handled efficiently and professionally. In this role, you'll handle a wide range of maintenance tasks to keep our community running smoothly. That includes responding to and completing resident work orders through AppFolio, performing repairs on plumbing, electrical, HVAC, appliances, and carpentry as needed, and taking care of routine upkeep like lighting, locks, painting, and general property repairs. You'll also assist with unit turns between residents by handling make-ready repairs and cleaning, troubleshoot and address any emergency maintenance issues (with possible on-call rotation), and help maintain an organized inventory of tools, supplies, and equipment-all while providing friendly and respectful customer service to residents and coworkers.

Maintenance Mechanic The Mechanic will perform preventative maintenance & emergency repairs to all packaging machinery, striving to improve equipment reliability & quality, as part of the maintenance team. Duties and Responsibilities: Fill out daily log reports, emergency breakdown reports, work orders, and communicate with incoming shifts. Perform machine set up and repair assembly and packaging equipment. Perform preventative maintenance routines on all production equipment. Ability to work on low voltage and 120-480vac equipment, starters, motors, vfd's, sensors, controllers, photo-eyes, etc. Install, debug and stabilize plant equipment as required. Read schematics and blueprints to interpret, diagnose, and troubleshoot electrical and pneumatic issues to properly and safely repair. Perform repairs and upgrades of the machinery and equipment to ensure proper operation. Install electronic parts and hardware, using soldering equipment and hand tools Assist in Production/Maintenance related assignments as needed. Communicate regarding issues and problems solve with Production staff any quality and safety concerns. Perform electrical and distribution lock out/ tag out method steady with customary safety protocol. Record maintenance data as directed by the Maintenance supervisor to monitor equipment performance, i.e. work orders Identify and report equipment concerns to the Maintenance Supervisor. Participate in overtime assignments as required. Mechanic is required to supply their own hand tools and a lockable toolbox. Working in a general manufacturing environment. Perform various other similar and related duties as required by the Plant Manager. Qualifications: Experience in equipment maintenance Experience with Pneumatics, Hydraulics and Electrical Ability to withstand wet, cold (35-40F), humid and hot environments, Must be able to bend, reach, kneel, stand for extended hours, Must be able to climb ladders, Must be able to move heavy objects. Must have experience with the following machines: Tiromat packaging machines & Drake Loaders Meat processing facility knowledge. 5 plus years' experience preferred. PPE/Tools Safety toe footwear Hairnet, beard net (if applicable), bump cap, frock If needed: safety glasses, hearing protection, rubber boots Safety Expected to work continuously in a safe manner, and to encourage others to work in a safe manner Expect to maintain good housekeeping, and report any unsafe conditions Food Safety/Quality Adhere to all GMP's (Good Manufacturing Practices), such as a good hand washing practices and adhering to employee hygiene plan Follow all USDA guidelines Report any issues regarding food safety or quality Disclaimer Statement The information contained in this job description is intended to describe the essential job functions required of those assigned to this job. It is not intended to be an exhaustive list of all accountabilities, activities, skills, and knowledge needed to perform the job. Please note that job functions are reviewed periodically and are subject to change based upon company business needs. Bobak Sausage Company is an Equal Employment Opportunity Employer.

*Employment Type:* Full time *Shift:* *Description:* Loyola Medicine, treating the whole person with compassion-to "also treat the human spirit." The Cardiac Cath Lab at Loyola Medicine, Medical Center seeks a Cardiac Cath Lab Technologist. *Schedule: *Monday - Friday Four 10-hour shifts per week; with no weekends No On-Call *What you will do: * * Function in multiple roles during the day as required. * **ROOM CIRCULATOR** - Patient interaction, monitoring vital signs, setup equipment and operate such as IABP, power injector, temporary pacemaker, biopsy, Rotoblator, thrombolysis procedures (Angiojet), ultrasound, IVUS, ACT, CoOx, peripheral interventions including carotid stenting, and cardiac interventions. * Properly handle, store, maintain and handoff sterile interventions. * Properly handle, store, maintain and handoff sterile equipment and supplies. * **SCRUB -** Maintain sterile procedure, infection control; observe all fluid patency of catheters, balloons and manifolds, assists according to physician's direction. * **MONITOR **- Functions in the control room operating the X-Ray equipment and hemodynamic monitoring equipment, reporting EKG, blood pressure, heart rate, pulse ox changes, recording hemodynamic pressures and pertinent patient and procedural information into the hemodynamic system, assist with X-Ray equipment and transfer images to digital archive. * Demonstrates knowledge of and calculates valvular areas on the hemodynamic monitoring system. * Ability to educate the patient of procedure expectations before, during and after the procedure. * Instruct the patient of post-catheterization limitations and restrictions. * Assists in the orientation of employees and students. **What you will need: ** * Associate degree OR equivalent training acquired via work experience or education * 1-2 years of previous job-related experience or new RT graduate * American Registry of Radiologic Technologist (ARRT) * CPR from American Heart Association only * Illinois Emergency Management Agency Certification (IEMA) *Compensation:* Pay Range: $30.99 - $50.71 per hour Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles. [Trinity Health Benefits Summary]( *Our Commitment * Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Prepare vehicle records and report both manually and on a computer. Perform safety inspections of equipment and prepare safety documentation required. Inspect and perform work on the under parts of vehicles. Access any area of the equipment or vehicl Technician, Trailer, Vehicle, Automotive, Transportation

Do you want to make a difference in the lives of others? Your skills, experience, and passion are needed on our team. We are looking for new on-call team members to join us, at our Crisis Recovery Center, to work as Crisis Services Technicians. This is an exciting opportunity to part of the expanding crisis services at the DuPage County Health Department! Located in our new Crisis Recovery Center on the DuPage County Campus in Wheaton, Crisis Services provides 24/7 crisis mental health services to county residents experiencing psychiatric crises or needing support for mental illness symptoms. Our team delivers top-notch care with rapid response times. Click to learn more about the Crisis Recovery Center. In this on-call position, you will be required to work at least three (3) shifts per month, having evening and weekend availability, working no more than 1000 hours per year. We offer a $2.00 per hour shift differential for our second shift and $2.50 for our overnight shift. Responsibilities Supports maintenance of a safe, therapeutic environment for clients seeking services through Crisis Recovery Center programs on the Substance Use Stabilization Unit, Adult Mental Health Unit, and Youth Mental Health Unit, as well as in Crisis Residential. Facilitates client safety and quality care in Crisis Residential and Crisis Recovery Center Programs, through completion of client rounding and belongings checks Assists with client medication observation in Crisis programming as needed Performs tasks related to maintaining environmental standards in crisis programming Assist in de-escalation of clients experiencing a mental health crisis through engagement with client and coordination with team members providing clinical intervention. Completion of required documentation within established timeframes, through use of an Electronic Client Record Participates in team meetings to assess clients' progress. Participates in emergency response activities as assigned. Requirements A qualified candidate must possess a valid State of Illinois Driver's license and have a good driving record. New employees are required to attend paid on-site, HR New Hire Orientation at our Central Public Health Center in Wheaton, during our day shift generally, from 8:00 am to 4:30 pm, for one week. Must have flexibility to work on the day shift for two weeks of additional training on site at the CRC. Must be 21 years of age. Experience preferred, but not required While performing the duties of this job, the employee must be able to stand, walk, use hands to push and pull cleaning equipment, reach with hands and/or arms, climb ladders, crouch or stoop, and lift or move up to 10 pounds. Salary $17.00 Hourly Job Type On-Call Service Unit Behavioral Health Services Department Emergency Services

Company is seeking a Maintenance Technician II to assist with maintaining an industrial laundry facility. Responsibilities include assisting with repairing, maintaining, installing and troubleshooting industrial equipment, systems and components incl Maintenance Technician, Technician, Maintenance, Manufacturing, Healthcare, Industrial

ICT (In-Circuit Test) Test Technician (1st shift) Nidec Mobility America Corporation(NMOA) has an immediate opportunity for an energetic and focused ICT Test Technician within our St. Charles, IL location. 1st shift (6a- 2:30p) with Overtime Available Saturdays (and possible some Sundays). A little about Nidec Mobility.. We are the North America headquarters for Nidec Mobility America (locations in Illinois, Michigan, Ohio, Canada, Mexico) and a leading Automotive Electronics Designer and manufacturer of sophisticated electronic sensing and control technology / components. We control the most discrete functions within an automobile, including: power system components, complex user interfaces, seat and power window switches, and instrument panel controls, electronic sensing/radar). Objective Under the general direction of the Mfg. Process Engineering Group Manager ensures that ICT failures are analyzed, root cause of the failure is identified and corrective action is implemented. Essential Responsibilities REQUIRES 5+ Years direct experience with AGILENT/KEYSIGHT 3070 in-circuit test experience to.. Perform visual inspection and electrical testing of all ICT failures. Identifies the root cause of the failure based on ICT output file and multi-meter/bridge readings. Identify soldering issues with the ICT failed boards based on knowledge of IPC-610 Nidec Mobility Quality Standards. Fixes the issues identified or instruct inspectors on how to fix the issue. Records the failure reason in the ICT test database. Setup ICT machine to run failed boards. Analyzes ICT first-pass yield and final yield using automated reports from ICT database and recommends corrective action to ICT technicians. Generate excel reports on a weekly basis about overall ICT rework work-in-process level. Maintain clean and organized work area at all times. Completes daily area clean up at the end of shift May participate in cross-training activities with other related positions Support / Participate in the Company's management and quality system including continuous improvement efforts Notify supervisors, group leaders or technicians of any problems or nonconforming product Support/Implement the Environmental policy as it pertains to work activities Perform other duties as required or assigned which are reasonably within the scope of the activities enumerated above Experience: 5+ Years direct experience with Agilent/Keysight 3070 in-circuit test experience Education: Associate's or 2 Year Degree Knowledge/Skills/Abilities: 5+ Years experience in an analysis/inspection role in electronics manufacturing Working Knowledge of troubleshooting electronic circuits Working knowledge of using Microsoft Windows and Microsoft Excel 3+ Years' experience in Solder inspection/repair Working knowledge of reading circuit diagrams NOTE: This position Is Not open to external sourcing (Recruiting agencies)

Effective Date 12/31/2025 Job Band B08 Job Purpose This is a role for someone who craves a global challenge balanced by the desire to be accountable for delivering against the model in the largest zone in Kraft Heinz. The Head of Technical Services will assess and develop a manufacturing strategy that sets an intended direction for the Manufacturing (OT) and Engineering Network to assure investments work in concert to alter the manufacturing cost curve. This individual will require a unique ideation/problem solving skillset which forces holistic thought about problems rather than problem-solving specific hurdles. This individual will work closely with the Manufacturing Leadership Team to prioritize the cost disadvantaged business segments in need of regaining a low-cost leadership position. It's through the evaluation and deployment of emerging technologies that these cost disadvantaged segments will be repositioned to sustain cost advantages. Essential Functions & Responsibilities * To define a manufacturing strategy as an intended direction which outlines the keys to attaining & retaining low-cost producer status and offers a competitive differentiation. * Alter the boundaries of the existing manufacturing capabilities to offer efficient/rapid new product development * To define strategies on Custom Automation & Innovation * To define strategies and prioritize Obsolescence Capital Planning * To define strategies Cyber security/ SOC * To define/direct stepwise cost reduction programs and/or projects across the Manufacturing Network. * To identify and prioritize opportunities based on the business segment cost needs. * Guide/lead the execution teams through implementation to assure sustainable business results. * Liaison between Manufacturing and Business M&A activities. * Monitor operations metrics and identify opportunities to redefine metrics that better align behaviors with desired Business results * Support the Manufacturing Leadership Team in prioritizing & resolving current technical Manufacturing issues impacting cost. * Team members will act as resident experts within their field of expertise and provide guidance to the broader team on the strategic fit within the Manufacturing Network. * Provide electrical/electronic technology guidance call knowledge and drive necessary changes regarding PLC's, HMI's, drives, controls, safety circuits and communications. * Lifecycle Management - Own and manage the OT Obsolescence CAPEX project portfolio. Identify key projects within the zone that warrant operational technology upgrades to increase operability, efficiency, and security within the manufacturing plants. * Deep electrical systems automation systems knowledge to steer the Network strategy for transformation projects. * Develop project design, scope, cost estimates and timelines for electrical automation systems that aid in transformation automation projects. * Creative electrical and controls mindset anchored in conceptual automation system solutions offering a step change in operational efficiency. * Provide guidance to the project teams and other stakeholders on project management. Expected Experience & Required Skills * Bachelor of Science degree in Engineering or Computer Science * +15 years of manufacturing experience is required with the ability to articulate & implement new technologies and process designs. * Possess a deep understanding of Manufacturing KPIs and electrical capital planning, maintenance reliability, electrical controls & automation and cybersecurity, * 3-5 years in Network Strategy/redesign experience * Able to lead a team (matrix relationship) of Process Managers & highly technical individuals. * Able to influence senior leaders within the Manufacturing Leadership Team * Able to facilitate highly technical statistical approaches to problem solving; gathering and analyzing Network data. * Able to provide mentoring and coaching to seasoned technical Leaders / professionals Work Environment & Schedule This position is considered a Field based environment; role requires frequent travel to customer locations, stores, manufacturing facilities, etc. Additionally, travel will be required up to 60% of the time. This job description is not designed to cover or contain all duties or responsibilities that are required of the role. Duties or responsibilities may change or be added with or without notice. Our Total Rewards philosophy is to provide a meaningful and flexible spectrum of programs that equitably support our diverse workforce and their families and complement Kraft Heinz' strategy and values. New Hire Base Salary Range: $220,800.00 - $276,000.00 Bonus: This position is eligible for a performance-based bonus as provided by the plan terms and governing documents. The compensation offered will take into account internal equity and may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors Long-Term Incentive (LTI): In addition to base salary and bonus, this role is eligible for additional compensation in the form of equity. Benefits: Coverage for employees (and their eligible dependents) through affordable access to healthcare, protection, and saving for the future, we offer plans tailored to meet you and your family's needs. Coverage for benefits will be in accordance with the terms and conditions of the applicable plans and associated governing plan documents. Wellbeing: We offer events, resources, and learning opportunities that inspire a physical, social, emotional, and financial well-being lifestyle for our employees and their families. You'll be able to participate in a variety of benefits and wellbeing programs that may vary by role, country, region, union status, and other employment status factors, for example: * Physical - Medical, Prescription Drug, Dental, Vision, Screenings/Assessments * Social - Paid Time Off, Company Holidays, Leave of Absence, Flexible Work Arrangements, Recognition, Training * Emotional - Employee Assistance Program , Wellbeing Programs, Family Support Programs * Financial - 401k, Life, Accidental Death & Dismemberment, Disability Location(s) Chicago/Aon Center Kraft Heinz is an Equal Opportunity Employer that prohibits discrimination or harassment of any type. All qualified applicants are considered for employment without regard to race, color, national origin, age, sex, sexual orientation, gender, gender identity or expression, disability status, protected veteran status, or any other characteristic protected by law. Applicants who require an accommodation to participate in the job application or hiring process should contact ***********************.

The IT Service Desk Lead is responsible for overseeing daily IT support operations, ensuring efficient service delivery, and driving continuous improvement across the helpdesk function in a Microsoft centric environment. This role serves as a key liaison between end-users and technical teams, ensuring secure, scalable, and premium support for both office and field-based employees. Responsibilities Lead daily IT support operations across office and field teams, ensuring timely resolution of issues and minimal business disruption, utilizing ITIL best practices. Serve as the primary escalation point for complex technical problems and high-priority service requests. Own and evolve ITSM processes (incident, service request, change and problem), document repeatable procedures, and lead support-related projects. Incident Management - Lead incident response efforts by prioritizing and resolving IT issues swiftly, coordinating with support teams to minimize disruption, meet SLAs, and drive continuous improvement through analysis and reporting. Service Request Management - Manage and optimize the service request lifecycle, ensuring timely fulfillment, process efficiency, and alignment with ITIL best practices of user requests in alignment to enhance user experience and operational performance. Change Management - Coordinate and oversee change management activities, ensuring proper assessment, approval, and communication of changes to minimize risk and disruption to IT services. Problem Management - Drive problem management processes by identifying recurring issues, performing root cause analysis, and implementing long-term solutions to improve service stability and reduce incident volume. Lead and report to management on a regular cadence. Project Management - Lead support center projects, integrating new technologies and driving successful implementation. Asset Management - Manage the lifecycle of user-facing technology, maintain accurate asset inventory, and enforce IT security protocols. Take ownership of support issues, engaging other internal / external expertise as required. Ability to communicate complex technical information to all stakeholders, including those who do not have a technical background. Continuously educate employees and equip them with essential IT tools and best practices. Qualifications Associate or bachelor's degree in information technology or equivalent work experience preferred 5+ years of progressive experience in IT support/helpdesk roles Proven supervisory experience with a strong grasp of helpdesk fundamentals-ticketing systems, SLA adherence, and performance metrics; ITIL Foundation knowledge or certification preferred. Advanced capabilities using Microsoft products including Outlook, Excel, Word, PowerPoint, Teams and SharePoint. Knowledge of modern workplace technologies, Windows system administration, M365 administration, enterprise backup and recovery, and system performance monitoring tools; agile project management techniques. Strategic thinker with strong problem-solving abilities, capable of managing multiple priorities under pressure while maintaining attention to detail. High emotional intelligence and discretion, with a proactive and customer-focused approach to anticipating needs and resolving issues. Self-starter with initiative and adaptability, thriving in fast-paced, diverse environments and contributing effectively to team success. Preferred experience with SOX compliance, enterprise desktop management, mobile device management, cybersecurity tools and incident response processes. Competencies: [Examples may include:] Leadership, Interpersonal Skills, High Emotional Intelligence, Independent Judgement, Teamwork / Collaboration, Verbal & Written Communication, Project Management, Microsoft Office Suite, Attention to Detail, Adaptability Working Conditions: This is a hybrid position based in Xeris' Chicago office. A minimum of three days per week in the office is required. On-site requirements may change at management's discretion. Position may require periodic evening and weekend work, as necessary to fulfill obligations. Periodic overnight travel. The level of the position will be determined based on the selected candidate's qualifications and experience. #LI-HYBRID As an equal employment opportunity and affirmative action employer, Xeris Pharmaceuticals, Inc. does not discriminate on the basis of race, color, religion, sex, gender identity, sexual orientation, national origin, age, disability, veteran status, genetics or any other characteristic protected by law. It is our intention that all qualified applications are given equal opportunity and that selection decisions be based on job-related factors. The anticipated base salary range for this position is $75,000 to $110,000. Final determination of base salary offered will depend on several factors relevant to the position, including but not limited to candidate skills, experience, education, market location, and business need. This role will include eligibility for bonus and equity. The total compensation package will also include additional elements such as multiple paid time off benefits, various health insurance options, retirement benefits and more. Details about these and other offerings will be provided at the time a conditional offer of employment is made. Candidates are always welcome to inquire about our compensation and benefits package during the interview process NOTE: This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization.

Warm Greetings! My name is Srinath and I am a Sr. Technical Recruiter with Avance Consulting. We are a leading consulting company and have been in consulting business for last 10 years. We are primary vendors to several Fortune 1000, Investment Banks and Financial companies. I found your resume on one of the job boards and it looks to be a good fit for an open position we have. Please review the listed below. If you are interested, please respond with your updated resume or give me a call on ************ Ext 238 at your earliest convenience. If you are not looking for new roles, please forward this email to someone either from your professional network or friends who are looking for new opportunities since we have an excellent referral program. Hi, I hope you are doing good. I have Opportunity with one of my client, please find below Job Description for your review. If you are interested please forward me your updated resume along with your contact details to discuss further Role:Technology Lead - .NET, WCF/WebServices (RESTful/SOAP) Duration: Full TIme / Permanent Location: Austin, TX / Chicago, IL Qualifications Basic • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. • At least 4 years of experience with Information Technology. Preferred • At least 3 years of experience in C#.Net, ADO.Net, .Net framework 3.5, ASP.Net. WCF, Webservices • At least 3 years of experience in Agile, Scrum or Kanban Methodologies • At least 3 years of experience in tools such as Jira, Jenkins and Continuous Integration and Continuous Delivery • Knowledge in NO-SQL environment, MongoDB • At least 3 years of experience in software development life cycle. • At least 3 years of experience in Project life cycle activities on development and maintenance projects. • At least 3 years of experience in Design and architecture review. • Ability to work in team in diverse/ multiple stakeholder environment • Experience to Financial Services and Wealth Management • Analytical skills • Experience and desire to work in a Global delivery environment Qualifications • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. Additional Information All your information will be kept confidential according to EEO guidelines.

Central Transport is one of the nation's most trusted and technologically advanced Less-Than-Truckload (LTL) carriers. With an ever-growing network of terminals nationwide, our team of dedicated professionals provide safe and efficient service to the United States, Canada, and Mexico. Our Growth is Creating Great Opportunities! Our team is expanding, and we want to hire the most talented people we can. Continued success depends on it! Once you've had a chance to explore our current open positions, apply to the ones you feel suit you best and keep track of both your progress in the selection process, and new postings that might interest you! Thanks for your interest in working on our team! Central Transport is an industry leading Less-Than-Truckload (LTL) transportation carrier. We are one of the nation's largest LTL carriers and have experienced significant growth over the last several years. As we continue to expand our network, we are seeking quality mechanics to help maintain our fleet of over 2,200 tractors, 8,500 trailers, and 1,700 forklifts across the United States and Canada. Position Available: * Forklift Service Technician - Performing routine and preventative maintenance on our fleet of electric forklifts* What Central Offers: Industry Leading Pay Medical, Dental, PTO, Paid Holidays Off, Paid Bereavement Leave, Paid Jury Duty Leave, Weekly pay. Now Offering Blue Cross Blue Shield Blue Care Network! Free Uniforms Provided Responsibilities Include: All forklift repairs needed Troubleshoot and diagnose electrical issues Component rebuild and hydraulic repair Perform routine maintenance such as checking batteries, lubricating equipment, and machinery Tire changes Brakes Bolt-on components Job Requirements: 1 year of Forklift Mechanic experience Basic set of tools ASE certification preferred but not required If you're interested and would like to learn more, please call at ************ ext. 2619

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military