Technician jobs in Rockport, TX - 445 jobs

This is a Computer Field Technician Position doing hardware repairs and installations on laptop and desktop units. You must have prior experience with laptop and desktop hardware. As part of your onboarding, you will be certified in Dell and Lenovo. All certifications are free to you. Job Details This is a 1099 Contract position. Call volume varies but is typically between 2-5 calls per day. Pay is based on the number of calls completed. Pay starts at $35 per ticket. You will be completing hardware part replacements for Dell and Lenovo warranty services. Pay period -every Friday after the first week of completing tickets. You must have a reliable form of transportation to run these calls. You must have access to a computer and the internet to log onto your portal. Tickets are run Monday through Friday. You must be able to log into your tech portal every workday by 9 am to accept, code (update status), and map out your calls. You will be responsible for contacting your customers and confirming a window to go onsite to complete the service. Parts will be provided for you by the manufacturers. They are typically held at FedEx for you to pick up in the morning. You will be provided with shipping labels and materials to return the removed parts.

Calpine Corporation is America's largest generator of electricity from natural gas and geothermal resources with operations in competitive power markets. Its fleet of 77 power plants in operation represents over 27,000 megawatts of generation capacity. Through wholesale power operations and its retail businesses, Calpine serves customers in 22 states and Canada. Its clean, efficient, modern and flexible fleet uses advanced technologies to generate power in a low-carbon and environmentally responsible manner. The company was established on the premise that a strong commitment to the environment is inextricably linked to excellence in power generation and corporate responsibility. Since its founding in 1984, Calpine has led the power industry in its unwavering commitment to environmental stewardship. In addition, its renewable geothermal plants use steam generated deep below the earth's surface to produce clean, renewable electricity. Job Summary (includes but is not limited to the following, other duties may be assigned) Responsible for start, stop and monitoring of equipment including reading gauges and meters and recording activities in operating logs and records. Uses computers and monitoring equipment to measure, record and make adjustments within operating parameters. Performs a variety of plant maintenance tasks including diagnosis, maintenance and repair of mechanical and electrical equipment in a safe, efficient and economical manner. Performs overhaul maintenance and system improvement tasks. Performs chemical analysis and chemical control on steam, cooling and condensate systems, and maintains chemistry logs. Incumbents assist in the development of standard operational procedures and provide input to plant betterment items to improve plant efficiency, reliability and safety. Ensures compliance with all local, State and Federal regulations and plant procedures. Regularly required to maintain plan security, operate heavy equipment such as manlifts and forklifts, and handle and transfer bulk chemicals. Job Responsibilities Senior-level; recognized technical expertise in own and possibly related functions. Performs a variety of complex technical service/support duties requiring specialized knowledge. Regularly makes decisions on non-routine or escalated technical issues. Independently prioritizes and executes responsibilities effectively for a single trade, group of related tasks or functional area. Checks own work and possibly the work of others; work results are of the highest quality standards and advanced technical competency. Errors may be serious, usually not subject to direct verification or check. Duties and tasks reflect substantial variety and complexity. Resolves the most complex technical issues, conferring with Team Leader occasionally; may serve as resource to others in resolution of complex issues. Works under limited supervision. Prioritizes own weekly schedule and may guide others in the completion of tasks within clearly defined schedules as set by management. Regularly provides on-the-job skills training to others in complex technical areas. Job Requirements High School Diploma, degree from technical/vocational school, military service or equivalent. Senior-level; generally 10+ years directly related experience including understanding of health and safety regulations, and previous experience working with and around hazardous energy, chemicals and waste materials including knowledge of safe handling, storage, and transport. Requires previous experience using test equipment and calibration appliances. Experience with machinery repair and control systems. Strong mechanical aptitude and basic understanding of chemistry, physics, electricity and mathematics. Advanced certifications/licensures. Valid state driver's license. Additional Calpine Information: Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities. Calpine is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with physical and/or mental disabilities. If you are interested in applying for employment and need special assistance or an accommodation to use our website or to apply for a position, please send an e-mail with your request to *************************. Determination on requests for reasonable accommodation are made on case-by-case basis. Please view Equal Employment Opportunity Posters provided by OFCCP here

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military

PRIMARY PURPOSE: Perform onsite technical work to install and maintain computer hardware, peripherals, and software applications throughout the district. Respond to work order requests by diagnosing and repairing computer hardware and peripherals. Facilitate the effective use of technology throughout the district. Provide technical support in the use of hardware and software throughout the district. QUALIFICATIONS: Education: High School Diploma or GED Clear and valid driver's license College degree in computer science or information systems is preferred. SPECIAL KNOWLEDGE/SKILLS: Previous experience with PC and Server maintenance and setup. Previous experience with PC and Server peripheral setup and maintenance. Previous experience with Windows PC and Server operating systems and applications. Some experience with cloud technologies such as Microsoft and Google platforms Ability to analyze and resolve computer hardware, peripheral, and software problems. Strong organizational, communication, and interpersonal skills. EXPERIENCE: One to two years of technical support experience with preferred experience in installing, maintaining, and repairing computers and peripherals in an enterprise or organization. MAJOR RESPONSIBILITIES & DUTIES: Technical Support * Provide remote and onsite technical assistance to district staff for use of equipment, including computer hardware, peripherals, and software. * Provide remote and onsite assistance to district office staff with technology problems and questions. * Install and upgrade computers and peripherals as needed. * Maintain computers for district staff and arrange for needed repairs. * Perform upgrades to computers, peripherals, and software. * Install and configure software applications as needed. * Relocate computer hardware and peripherals as needed. Equipment Repair and Maintenance * Diagnose and repair computer hardware and peripherals. * Service equipment according to established preventive maintenance schedule. * Maintain updated records of preventive maintenance. * Maintain records of time and materials required to perform repairs and service. Inventory * Maintain inventory of hardware, software, and peripherals throughout the district. * Identify, request, and control the inventory of repair parts. Safety * Operate tools and equipment according to prescribed safety procedures * Follow established safety procedures and techniques to perform job duties, including lifting, climbing and carrying. * Correct unsafe conditions in the work area and report any conditions that are not correctable to the supervisor immediately. Other * Compile, maintain, and file all physical and computerized reports, records, and documents required. * Comply with policies established by federal and state law, TEA and local school board. * Comply with all district and campus routines and regulations. * Must be willing and able to pursue additional training and professional growth. * Perform other duties as assigned. * Regular and reliable attendance is an essential job function. EQUIPMENT USED: Computers, copiers, peripherals, audiovisual equipment and small hand tools. WORKING CONDITIONS: Mental Demands/Physical Demands/Environmental Factors: Frequent district wide travel; repetitive hand motions; prolonged use of computers; lifting of heavy equipment (50 lbs.). Moderate to frequent standing, stooping, bending, pushing, pulling, and lifting. The foregoing statements describe the general purpose and responsibilities assigned to this job and are not an exhaustive list of all responsibilities and duties that may be assigned or skills that may be required.

In this role you would have the responsibility for performing various functions to manufacture and assemble jewelry items in a manufacturing environment. We offer skills training to teach you the skills you need to be successful - no prior jewelry manufacturing or assembly experience required. 1st Shift Schedule: Monday - Friday; 8 AM - 4:30 PM WHAT YOU WILL BE DOING * Perform manufacturing processes as needed in up to three (3) Manufacturing skills. Associate will be required to learn and achieve one (1) skill within 6 months of employment with no more than two (2) skill failures and a total of three (3) skills within 3 years of employment, with no more than three (3) skill failures. * NOTE: Opportunities for all skills training based on business need and meeting pre-requisites. ALL SKILLS Bench Finished Goods Prebench Handmade Hand Assembly Casting Mech Finish Mold Making - Basic Polish Gemstone Setting Wax Injection Rework Tree Setup Laser Operation WHAT YOU'LL NEED * Ability to read, write and speak English fluently including, but not limited to, verbally communicating with plant personnel regarding work processes and work assignments. * Ability to read and understand written work processes, safety instructions, forms, training materials, etc. * Ability to complete production forms. * Ability to perform basic formulas such as addition, subtraction, multiplication, division, counting and totals. * Ability to accurately determine weights and measurements. * Ability to pass a background check as well as an alcohol, controlled substance, and illegal drug screen that meets Company standards before beginning regular employment. Preferred Qualifications * Basic computer or tablet operating skills preferred.

Ready to Fix, Tinker, and Save the Day - One Copier at a Time? At DEX Imaging, we're not just in the business of printers and copiers-we're in the business of making office life smoother, faster, and a whole lot less frustrating . We are currently on the lookout for a Copier Service Technician in Corpus Christi, Texas who's part problem-solver, part tech whisperer, and all-around customer service superhero.If you're the kind of person who loves digging into the nuts and bolts of machines and can troubleshoot like a pro, then we want to meet you! Join our high-energy team, bring your skills (or we'll help you build them), and enjoy a workplace where no two days are ever the same. Who we are: DEX Imaging is a leading provider of document handling equipment and services with multiple offices and locations throughout the United States. We are the nation's largest independent provider of office technology. We are the industry leader in delivering excellent customer service every time and we do this by hiring and training great people. Working as a Service Technician you can expect: Full time schedule, working 40 hours a week Full benefits, competitive pay, and uncapped commissions Opportunity for training, development, and promotion Excellent corporate discounts Employee recognition and rewards program Regular business hours. We value work/life balance. Competitive PTO and Paid Holidays If you are career minded and ready to be an integral part of a team in a dynamic, innovative and upbeat atmosphere, then you belong right here on our award winning team. What's the opportunity: Service Technicians must be mechanically inclined, extremely reliable and trustworthy. They should be comfortable working independently and have excellent communication skills. In this role, Service Technicians perform diagnostics, service repairs and maintenance work on customer and dealer-owned copier equipment. Our technicians provide top notch customer care to all of customers and clients. What will you do: Provide service and customer support during field visits or dispatches. Manage all on site installation, repair, maintenance and test tasks. Diagnose errors or technical problems and determine proper solutions. Produce timely and detailed service reports. Follow all company's filed procedures and protocols. Cooperate with technical team and share information across the organization. Comprehend customer requirements and make appropriate recommendations/briefings. Update job knowledge by participating in educational opportunities; reading professional publications. Build positive relationships with customers. Works as part of a cohesive team within the shop to meet customer needs. Follows all safety practices of the organization when completing work assignments. Helps to maintain company vehicles, inventory and tools in proper working condition. Maintain knowledge on existing products and pursues additional technical and product knowledge by actively participating in the training programs of the dealership. Maintains communication with the customer and answers questions relative to the work being performed. Makes recommendations for additional work that needs to be completed. What you bring to the table Must possess a valid driver's license Ability to manage service calls that require more time than anticipated without becoming frustrated or rushing through a job. Superb customer service skills and an ability to diagnose and solve problems from non-technical descriptions provided by their customers. What can DEX provide to you: Opportunity, career development and personal growth In house training Company culture where we celebrate our team members A place where you can stop going to work and you can start building your career The preceding has been designed to indicate the general nature of work performed; the level of knowledge and skills typically required; and usual working conditions of this job. It is not designed to contain, or be interpreted as, a comprehensive listing of all requirements or responsibilities that may be requires by employees in the job. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations made to enable individual with disabilities to perform essential functions. This job description does not imply or cannot be considered as a part of an employment contract. DEX Imaging as an Equal Opportunity Employer.

In this role you would have the responsibility for performing various functions to manufacture and assemble jewelry items in a manufacturing environment. We offer skills training to teach you the skills you need to be successful - no prior jewelry manufacturing or assembly experience required. 1st Shift Schedule: Monday - Friday; 8 AM - 4:30 PM WHAT YOU WILL BE DOING Perform manufacturing processes as needed in up to three (3) Manufacturing skills. Associate will be required to learn and achieve one (1) skill within 6 months of employment with no more than two (2) skill failures and a total of three (3) skills within 3 years of employment, with no more than three (3) skill failures. NOTE: Opportunities for all skills training based on business need and meeting pre-requisites. ALL SKILLS Bench Finished Goods Prebench Handmade Hand Assembly Casting Mech Finish Mold Making - Basic Polish Gemstone Setting Wax Injection Rework Tree Setup Laser Operation WHAT YOU'LL NEED Ability to read, write and speak English fluently including, but not limited to, verbally communicating with plant personnel regarding work processes and work assignments. Ability to read and understand written work processes, safety instructions, forms, training materials, etc. Ability to complete production forms. Ability to perform basic formulas such as addition, subtraction, multiplication, division, counting and totals. Ability to accurately determine weights and measurements. Ability to pass a background check as well as an alcohol, controlled substance, and illegal drug screen that meets Company standards before beginning regular employment. Preferred Qualifications Basic computer or tablet operating skills preferred.

A technician capable of diagnosing and repairing most systems of the automobile, with little guidance or support from an A-Tech, Shop Foreman, or Team Leader. Efficient and effective at on the job learning to apply to new vehicles and technology when concerns arise. Improved diagnostic skills through training & experience, and competent in complex mechanical repairs. Education High School Experience 1-3 years Additional Information Certified Automotive Technician | AutoNation Hyundai Corpus Christi | Pay Starting $27/flag Description The Certified Technician performs vehicle repair and maintenance as assigned in accordance with dealer and factory standards and builds Customer loyalty by developing trust and ensuring confidence in AutoNation as a care-giver for their vehicle safety and reliability. Dealership Highlights: * Climate controlled shop * Pay starting at $27/flag * 5 day work week What are the day-to-day responsibilities? >Performing vehicle repair and/or maintenance work as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards to drive Customer loyalty. >Communicating with Parts Department and Service Advisors regularly to effectively manage production and Customer communication. >Diagnosing the cause of any malfunction and perform repair, if authorized by the Customer. >Conducting multi-point inspections to make appropriate recommendations to ensure safety and reliability of Customer vehicles. >Documenting work performed on each vehicle on the repair order. >Maintaining an inventory of normal Technician's tools not normally inventoried by the Service department as "special tools." >Keeping abreast of factory technical bulletins and participating in factory-sponsored training classes as appropriate. Providing an exceptional customer experience to drive loyalty How will I know if I am successful? >The performance of a Certified Technician is measured by achieving: >Targeted production >Targeted sales >Targeted Customer Satisfaction Index What are the requirements for this job >High School diploma or equivalent >2+ years experience as an automotive technician >Automotive technical training (varies based on store needs) >Attention to detail >Organization and follow-up skills >Valid in-state driver's license and have and maintain an acceptable, safe driving record What are the opportunities for career growth? >Our Associates have many choices for career growth and development after success in a Service Technician role. >Opportunities may include: >Master-Certified Technician >Service Advisor >Service Management Exciting Benefits and Perks Await You: >Competitive compensation and 401k matching >Enjoy a healthy work-life balance with insurance plans (health, dental, vision) and maternity benefits. >Associate purchase and discount programs for new and pre-owned vehicles, services, parts, collision, accessories, and AutoGear >Access amazing deals and discounts through YouDecide, a website with offers from top providers and retailers >Join our DRVPNK mission to raise and donate millions of dollars to cancer research and treatment, partnering with cancer charities nationwide AutoNation is one of the largest automotive retailers in the United States, offering innovative products, exceptional services, and comprehensive solutions, empowering our customers to make the best decisions for their needs. With a network of dealerships nationwide strengthened by a recognized brand, we offer a wide variety of new and used vehicles, customer financing, parts, and provide expert maintenance and repair services. Through DRV PNK, we have raised over $40 million for cancer-related causes, demonstrating our commitment to making a positive difference in the lives of our Associates, Customers, and the communities we serve. AutoNation is committed to creating a diverse, equitable, and inclusive environment in our workplace and the services we provide. We welcome candidates from all backgrounds who are passionate about making a positive impact. Even if you do not meet every requirement, we encourage you to apply. Join our team and help us foster a culture of belonging while contributing to our revolutionary work in the automotive industry. We value innovation, teamwork, and a commitment to making a positive impact in the world. Employment Position: Full Time Salary: $27.00 - $27.00 Hourly Salary is negotiable. Zip Code: 78412 Hyundai Technical Training Equivalency Assessment Program Hyundai welcomes experienced technicians from other OEMs. The program allows technicians with training from an industry-recognized source, other than Hyundai, to test out of certain Hyundai instructor-led technical training courses, provided they meet certain requirements.

SMARTECH is a National Service Provider of PC, Server, and Printer maintenance and repair. We are looking for a highly motivated IT contractor to work in a fast-paced field service role. Applicants should have 2 years of IT hardware experience. Assignments will include traveling to customer sites to make warranty hardware replacements on desktops, laptops, and tablets. This is a 1099 independent contractor position. When you partner with SMARTECH you talk to real people that want you to succeed. We offer several industry certifications at NO COST to you. Not only are they great to hone the skills you already have, but also look great on your resume! WHAT WE DO: Hardware Replacement/Repair: Desktops, Laptops, Servers, Printers, and POS systems. Why Join Us? Do you prefer to focus on hardware components instead of software issues or endless password reset tickets? Do you have experience tinkering with devices, computers, or laptops? Here you will have the freedom to decide how busy you can be and how much money you want to make. Our customers come from all backgrounds: You may be fixing a computer in a home or office setting. Successful candidates start their day at home, checking their queue and contacting clients before heading out to pick up components and travel to client locations. The normal coverage area is a 100-mile radius of parts pick-up. Job Expectation: Complete and pass Client Certifications within 3 days. Good Time Management you will be traveling to client locations to repair equipment. Laptop/Desktop Hardware experience. Have your Tools and ESD protection. Use Computer/Mobile to receive and manage repair requests. Access to client training site. Basic Qualifications: Must be legally authorized to work in the United States. Must have a valid driver's license and vehicle. Must be able to pass required certifications. Must have computer hardware experience. Working Place: Corpus Christi, Texas, United States Department : Unisys

CALALLEN INDEPENDENT SCHOOL DISTRICT JOB DESCRIPTION Job Title: Computer Technician Exemption Status/Test: Nonexempt Reports to: Director of Technology Dept./School: Technology Number of Days: 240 days Primary Purpose: Perform on-site technical work to install, maintain, troubleshoot, and repair district computers, software, peripherals, network hardware, VoIP phones, video conferencing systems, access control systems, and video surveillance systems. Provide technical support and train users on basic technology equipment operations and software applications. Perform other technology department duties as assigned. Qualifications: Education/Certification: High school diploma or GED Preferred- Associate's degree in a Technology Clear and valid Texas driver's license Special Knowledge/Skills: Knowledge of computer workstation setup, computer hardware, software applications, computer imaging, and basic network infrastructure. Ability to install, maintain, and repair computers and peripherals, including printers, scanners. Ability to install and maintain network cables and hardware. Ability to diagnose computer hardware and network problems and perform repairs. Experience: Two-year work experience installing, maintaining, and repairing computers and peripherals in a network environment. Major Responsibilities and Duties: Install computer hardware, peripheral, network hardware, VoIP phones, video conferencing equipment, sound system equipment, access control equipment, video surveillance equipment, and application software for the purpose of maintaining safe and effective district and campus operation including classrooms, offices, libraries and computer labs. Troubleshoot malfunctions of computer hardware, peripheral, network hardware, VoIP phones, video conferencing equipment, sound system equipment, access control equipment, video surveillance equipment, and application software for the purpose of determining appropriate actions to repair or maintain computer, network, and system operations. Repair computer hardware, peripheral, network hardware, VoIP phones, video conferencing equipment, sound system equipment, access control equipment, video surveillance equipment, and application software or the purpose of maintaining the equipment in a safe and functional operating condition. Upgrade computers, peripherals, network equipment, video conferencing equipment, video surveillance equipment and software applications for the purpose of meeting the district technology requirements. Relocate computer hardware, peripheral, network hardware, VoIP phones, video conferencing equipment, and video surveillance equipment. Complete technology work orders as assigned. Install, repair and test network cabling. Assist with the installation, maintenance, troubleshooting, and repair of data communications circuits and equipment. Safety: Operate tools and equipment according to prescribed safety procedures. Follow established safety procedures and techniques to perform job duties, including lifting climbing and carrying. Correct unsafe conditions in the work area and report any conditions that are not correctable. Other: Adhere to district and technology policies and procedures. Maintain good working relationships with campus administrators, teachers, and other Technology staff. Assists in researching specifications and recommend computer related purchases to management. Ensure the accurate and complete logging of requires information into the technology inventory system. Prepare written materials such as work order reports, and equipment inventory audit reports for the purpose of providing written support and/or conveying information to management personnel. Attend meetings as assigned for the purpose of conveying and/or gathering information to perform functions. Maintain an appropriate level of proficiency through ongoing personal staff development through courses, magazines, group meetings, webinars and other available resources. Respond to after-hours emergencies as needed. Equipment Used: Hand tools and test instruments for electronic repairs and cable installations. Personal computers and peripherals, including modems and printers. Working Conditions: Mental Demands/Physical Demands/Environmental Factors: Climbing, stooping, bending, and kneeling; frequent use of small hand tools and electronic test equipment; frequent districtwide travel. Occasional prolonged and irregular hours. May be required to be on-call 24 hours a day. Tools/Equipment Used: Hand tools and test instruments for electronic repairs and cable installations; personal computers and peripherals, including modems and printers. Posture: Prolonged sitting and standing; regular kneeling/squatting, bending/stooping, pushing/pulling, and twisting. Motion: Repetitive hand motion; frequent keyboarding and use of mouse; regular walking, grasping/squeezing, wrist flexion/extension, reaching; may climb ladders. Lifting: Moderate lifting and carrying (up to 44 pounds); occasional heavy lifting (45 pounds and over) Environment: Exposure to electrical hazards; occasional prolonged and irregular hours; frequent districtwide travel; May be required to be on-call 24 hours a day. Mental Demands: Work with frequent interruptions; maintain emotional control under stress This document describes the general purpose and responsibilities assigned to this job and is not an exhaustive list of all responsibilities and duties that may be assigned or skills that may be required.

Raba Kistner, Inc. is a premier Engineering Consulting and Program Management firm. Our purpose is to build a better and more sustainable world for our employees, their families, our clients, and the communities we serve. Our Core Values are: Community "We care for our communities" Integrity "We act with integrity" Passion "We infuse passion into everything we do" Quality "We believe quality comes from a culture of innovation and continuous improvement" Growth "We dedicate ourselves to personal and business growth" Raba Kistner is seeking a Construction Materials Technician to join our Consultants team in either Corpus Christi , T X . The Construction Materials Technician is responsible for conducting field or laboratory testing, sampling, and/or inspection services. Responsibilities include: Communicate with dispatcher/coordinator to ensure priorities and deadlines are met in both the field and laboratory. Meet with supervisors of contractors, engineer/architect representatives and/or other project leads on project sites to discuss and coordinate testing, sampling or inspection of construction materials or construction procedures. Following safety protocols, ensure safe utilization, storage and maintenance of all nuclear gauges and field equipment. Communicate project progress and delays to supervisor and dispatcher. Submit accurate and complete testing/inspection reports on a daily basis. Drive company vehicles to job sites in a safe manner. Perform other duties as assigned. Qualifications Shall possess a valid driver's license within the applicable jurisdiction and meet firm's auto insurability requirements. Construction Materials Technician in Training: High School Diploma or GED required. No experience necessary Construction Materials Technician I: At least 6 months of applicable experience in the materials testing and inspection industry and possess at least 1 or more industry certification Relevant industry certification from ACI, NICET, TXDOT, ICC, PTI, or other comparable industry certifications as approved by hiring manager. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to read and understand instructions, labels, reports, etc. Good oral and written communication skills including the ability to write short correspondences, notes, letters and memos. Must be safety minded and willing to put safety first in performing all duties. The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. While performing the functions of this job, the employee is occasionally required to sit, frequently required to stoop, kneel crouch or crawl, regularly required to stand, walk, climb, balance, and talk. Continuously required to use hands and reach. Occasionally required to lift and/or move up to 70 pounds with or without assistance. Specific vision abilities required by this job include close vision, far vision, color vision, peripheral vision, focus vision, depth vision. Work environment includes potential exposure to movement of heavy equipment on construction or roadway sites; potential exposure to hazardous dangerous chemicals and solvents, noise, dust, fumes, grease and oils, radiant and electrical energy, and vibration; all of which would require the employee to implement and follow proper safety procedures and utilize appropriate protective equipment. Regular use of non-complex machines and equipment and hand tools such as sledgehammers, shovels and picks. Work assignments are frequently performed outside in all weather conditions. This position may require protracted or irregular hours. Flexibility to work irregular hours is necessary due to client needs. EOE/Disabled/VeteranDrug Free Workplace #LI-ONSITE

Start your journey with Blue Compass RV as we are looking for a Technician Apprentice to join our team and deliver extraordinary customer experiences. WHO WE ARE Blue Compass RV is the fastest growing RV Company with more than 100+ RV dealerships across the country! We staff each dealership with the best people in the business. We are known for the great care we take with customers and associates alike. You are not just an employee with our company, you are family. Imagine working at a professionally and financially satisfying job where you can make a positive impact on our organization and customers every day. As a Technician, you will perform repairs and maintenance work in accordance with factory and dealership specifications and time standards for an excellent customer experience. Your work efficiency allows you the opportunity to control your pay! COMPENSATION: $16-$18/hourly WHAT WE HAVE TO OFFER Our state-of-the-art training programs offer our technicians continued education, all paid certification, and opportunity for future career growth. Paid Mentorship program Medical, dental, vision, disability, FSAs, and life insurance! Paid Time Off and paid holidays Employee assistance program Pet insurance Referral Program 5-day work weeks Legal coverage 401K! WHAT WE ARE LOOKING FOR As an Apprentice Technician you are not required to work on engines. Think of this as maintenance and repair of a home on wheels! If you have experience in the following, you should apply with us: Appliance Repair HVAC/ Roof mounted A/C Systems Electrician/Electrical Systems Plumbing/Water Heating Systems Propane Systems Interior Carpentry/Countertops Slide Out Systems Generators Satellite Systems WHAT WE ARE LOOKING FOR: Provide and document complete diagnostic test and repair or replacement services to customers units Perform electrical, plumbing, carpentry and appliance maintenance Track all parts and materials used in repairs or replacements Repairing the trailer approved by customer, warranty or manufacturer Communicating with all departments when more information needed or when problems arise Ensure that the final work product meets quality standards WHAT YOU CAN BRING TO THE TABLE: Some Technician Experience Support service team technicians Running errands for parts or supplies Assist technicians with service jobs Assist in other areas of service department Show potential for growth and ability to learn RV repair techniques Commitment: Ensure our customers have a world-class service experience at every step along their ownership journey, especially in RV unit repairs. Excellence: Provide an unparalleled level of technical knowledge and expertise to help repair and maintain RV units to the highest factory and dealership standards. Communication: Clearly and effectively communicate technical information regarding customer RV units to Service Advisors. Accountability: Comply with all manufacturer standards of quality and timeliness for repairs and maintenance work and ensure that all estimates and work orders are accurate. Safety: Understand and comply with all federal, state and local regulations that affect shop operations, such as handling and disposal of hazardous waste, OSHA, and use of safety and health personal protective equipment. APPLY WITH US! If you are ready for a rewarding career with competitive compensation and benefits, and opportunities to excel and advance, consider joining the Blue Compass RV organization. Our interview process typically includes a phone interview, in-person interviews, background check, reference check, driving record review and a drug screen. Be a part of the best customer experience team in the RV industry... apply with us today! Blue Compass RV is an equal opportunity employer and maintains a drug- and alcohol-free workplace. Some positions may require applicants to possess a valid driver's license and have a good driving record.

HVAC Repair Technician Why an HVAC Repair Technician career might be right for you: You like solving problems - Each repair is different. You enjoy diagnosing problems and figuring out solutions. You like fixing things - Getting things working again is a satisfying outcome. You did that! You like helping others - You're the hero of the home like a first responder, lifting the weight off the shoulders of grateful homeowners. You like to be on the move - You're not stuck at a desk all day - you are welcomed into customers' homes. Why a career with Sears Home Services is right for you: Great hourly rates - great hourly base rate salary, depending on experience. Benefits - Comprehensive set of medical, dental, and vision benefits, with an additional $4000 annual subsidy for associates with dependents! 401k match - Opportunity to contribute to 401k plan, with 100% company match up to 3%. More ways to earn -Technicians have the opportunity to earn additional performance bonuses & sales incentives throughout the year. Flexible schedules - Sears techs are NOT on call. Year-round work - With Sears large scale and wide product range, Sears cross trains techs and keeps them busy year round. Expert training - Best in class training program. Tens of thousands of repair techs trained by Sears Technical Institute in the past 60 years. We will teach you the skills you need to succeed! Peer mentoring - Onboarding buddy and mentor technicians to help you grow your skills Career advancement - Many ways to advance and cross-train to keep growing your career. Our average tenure is >12 years! Easy tools - Sears provides company vehicle, uniforms, specialty tools, mobile phone & industry-leading app that eliminates paperwork and provides technical support. Job responsibilities: Repair appliances with high levels of quality and efficiency Deliver delightful customer experience that exceed expectations consistently Provide customers with value-added solutions that help make their home more clean, comfortable & protected Keep company truck well-maintained & organized, and help manage parts efficiently Requirements: High school diploma or general education degree EPA Type II or EPA Universal Mechanical knowledge, including use of testing & repair tools Can follow directions and processes for quality workmanship Can use smartphone, including use for part ordering Background & drug screen Valid driver's license for the state in which you work

Job Summary: The Leak Repair Technician is responsible for identifying and repairing leaking components within industrial settings. This role involves assessing leaks, reporting findings to supervisory personnel and engineering, and executing repair operations using various techniques and tasks. Duties and responsibilities: Assess leaking components and report findings to supervisory personnel and engineering. Perform leak repair operations utilizing techniques such as drill and tap, field repairs, clamp and enclosure installation, measuring components, stand-by operations, inspections, and evaluation of performance on repair activities. Execute a variety of tasks, often adapting to changing assignments on short notice. Prioritize and complete work assignments by specific deadlines. Follow precise directions and procedures of the supervisor on the project. Requirements Essential qualifications: High school diploma or equivalent. Ability to perform a variety of tasks and adapt to changing assignments. Experience with leak repair techniques and equipment. Ability to prioritize and complete work assignments by specific deadlines. Knowledge of plant maintenance and repair work preferred. Ability to follow precise directions and procedures of the supervisor on the project. Must possess a valid driver's license. Must have a TWIC card. Must be able to pass a background and drug screen. Preferred qualifications: Additional certifications or training in industrial maintenance or repair. Five (5) or more years of experience in an industrial operations or maintenance role. Familiarity with safety protocols in industrial settings. Strong problem-solving skills. Excellent communication skills. Working conditions: The Leak Repair Technician may work in various industrial settings, including refineries, chemical plants, or manufacturing facilities. This role may require working in confined spaces, at heights, and in environments with exposure to noise, chemicals, and extreme temperatures. The position may involve overtime, weekend, and on-call work. Physical requirements: Ability to lift and carry heavy equipment and materials. Ability to stand, stoop, kneel, climb, and perform tasks in confined spaces. Physical dexterity to operate tools and equipment safely. Ability to wear personal protective equipment (PPE) as required by the job site.

Utility Technician I's are responsible for the maintenance and operation of the six (6) Wastewater Treatment Plants and the City's lift stations. They are responsible for the maintenance and operation of the wastewater collection lines. Employees must remain in compliance with TCEQ and other applicable laws and regulations while working within the scope of their position. Responsibilities * Performs preventative maintenance on engines, generators, pumps, settling tanks, filters, chemical feed systems, and other equipment * Perform basic to intermediate process control measurements, testing of DO, ph, and Residual Analysis meters, sludge quality, aqueous, and atmospheric sulfide levels, etc * Preforms emergency chemical release responses, containment, and evacuation procedures * Demonstrates basic knowledge of plant flow and treatment process * Performs process lab analysis and records data for residuals * Maintains accurate inventory of all treatment chemicals * Monitors distribution system pressures remotely * Receive chemical deliveries * Apply knowledge of TCEQ regulations * May be asked to perform other duties as assigned Position Type and Typical Hours of Work * Non - Exempt - Full-Time * Rotating 40-hour work week, must be available to work additional hours as needed; Flexibility to work evenings, weekends, and holidays is a schedule requirement * In the event of an emergency, employees are required to work to provide for the safety and well-being of the public, including the delivery and restoration of vital services. The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties, and skills required of personnel so classified in this position. This job description is subject to change as the needs and requirements of the job change. Minimum Qualifications * High School Diploma/ GED * No prior experience Licenses and Certifications Required * A valid driver's license is required; successful out-of-state candidates must be able to obtain a valid Texas driver's license within 90 days of hire Employment Testing Employment is contingent on passing any post-offer pre-employment screening as listed below: * Criminal Background Check: Yes * Motor Vehicle Record Check: Yes * Drug Screening: Yes * Physical Exam: Yes Basis of Rating A recruitment consultant will evaluate all applications against the posted qualifications. The city may also conduct additional skill assessment tests, in addition to the panel interview. Supplemental Information * Any position that lists a minimum qualification for education level and/or license/certification will require the applicant to provide proof of documentation if selected for hire into the position with the City of Corpus Christi. The City of Corpus is an Equal Opportunity Employer and complies with the Americans with Disabilities Act and Uniformed Services Employment and Reemployment Rights Act (USERRA). If you require an accommodation in order to apply for a position, please request assistance from the Human Resources Department.

Electrical Technician - Industrial Maintenance Schedule: Monday-Friday with overtime as needed We are seeking a skilled and safety-focused Electrical Technician to support the maintenance, optimization, and troubleshooting of electrical systems. This role involves close collaboration with maintenance supervisors, electrical leads, and shift electricians to ensure reliable operations and strict adherence to safety protocols. The ideal candidate will bring hands-on experience in electrical repair, system calibration, and equipment support, with a strong commitment to teamwork and operational excellence. Responsibilities Install, maintain, and optimize electrical systems and equipment Assist in troubleshooting and repairing existing electrical infrastructure Provide essential diagnostic and repair support Collaborate with engineers on HMIs, PLCs, and drive systems Verify and calibrate monitoring equipment to ensure accuracy and performance Follow all safety procedures Participate in continuous improvement efforts and report system inefficiencies Qualifications Demonstrated commitment to safety and reliable attendance Prior experience in electrical maintenance within an industrial, manufacturing environment, or military experience Basic computer proficiency for documentation and system interface Willingness to work overtime and adapt to changing priorities Positive, team-oriented attitude with strong communication skills Preferred Skills Familiarity with hydraulic systems Basic understanding of PLCs and industrial automation Ability to interpret technical manuals and schematics Troubleshooting and problem-solving abilities

EchoStar is reimagining the future of connectivity. Our business reach spans satellite television service, live-streaming and on-demand programming, smart home installation services, mobile plans and products. Today, our brands include Boost Mobile, DISH TV, Gen Mobile, Hughes and Sling TV. Our Technicians deliver TV and Smart Home solutions to millions of customers. As a technician, we will train you to lead the charge for a world-class customer experience, educating and connecting more Americans with every home you visit. You're the backbone of our organization and ensure an excellent customer experience. Our dedication to customer experience has paid off, as DISH is a six-time J.D. Power award winner for being #1 in Customer Satisfaction. Job Duties and Responsibilities What You'll Do: You'll visit customers' homes, solve problems, and introduce them to smart home tech. * Install and service DISH equipment and smart home products in customers' homes * Teach customers how to use their tech and offer additional services when helpful * Keep a clean work area and maintain a professional attitude while working independently but staying connected with the team What's in it for You: * Career Growth: Start here and grow fast! Many of our leaders began in this role, with opportunities to move into different departments for new challenges * Pay Increases: Automatic promotion after 6 months with a $1/hour raise. Additional promotions with 5-10% pay increases based on performance * Bonus Potential: Earn up to $6,400 your first year, and up to $9,100 annually after. High performers also receive AwardPerqs-redeemable for travel, electronics, and more * Comprehensive Benefits: Paid training, time off, Medical, Dental, Vision, Life Insurance packages, HSA, 401(K) with company match, Employee Stock Purchasing Program and Tuition Reimbursement * Exclusive Perks: Complimentary DISH TV ($114.99/month), discounts on Sling TV ($5/month), and Boost Mobile plans (starting at $15/month), company-provided van, tools, and uniforms Paid Training You'll Get: * Clear, step-by-step guidance for installations and service * Smart home tech knowledge to support and educate customers * Best practices created by our most experienced techs Skills, Experience and Requirements What You'll Need: * Valid Driver's License: Clean record required * Schedule Flexibility: Willingness to travel as needed; flexible to work shifts that might include evenings, weekends, or holidays * Physical Ability: * Climb ladders (up to 40 ft) * Lift up to 70 lbs * Must meet and maintain 335 lb weight limit * Customer Focus: Build trust and create a great experience * Problem-Solving: Tackle a variety of challenges on the spot * Determination: Work in tight spaces and all kinds of weather * Adaptability: Handle changes and unexpected tasks with ease Benefits: From versatile health perks to new career opportunities, check out our benefits on our careers website. Employment is contingent on successful completion of a pre-employment screen, to include a drug test and an acceptable driving record. Compensation listed may reflect a combination of hourly pay rate and location pay differential. The posting will be active for a minimum of 3 days. The active posting will continue to extend by 3 days until the position is filled. We pride ourselves on developing and promoting talent as an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. EchoStar will accommodate the sincerely held religious beliefs of employees if such accommodations are not undue hardships and are otherwise within the bounds of applicable law. All qualified applicants with arrest or conviction records will be considered for employment in accordance with local, state, and federal law. You may redact any information that identifies age, date of birth, or dates of school/graduation from your application documents before submission and throughout our application process. EchoStar will provide reasonable accommodation to otherwise qualified job applicants and employees with known physical or mental disabilities, unless doing so poses an undue hardship on the Company, poses a direct threat of substantial harm to others, or is otherwise not required by law. EchoStar has a more detailed Accommodation Policy that applies to employees. EchoStar endeavors to make echostar.com and jobs.echostar.com accessible to users. Please contact *************** if you would like to discuss the accessibility of our website or need assistance completing the application process. This contact information is for accommodation requests only; do not use this contact information to inquire about the status of applications. Click the links to access the following statements: EEO Policy Statement, Pay Transparency, EEOC Know Your Rights (English/Spanish) Salary Ranges Compensation: $15.75/Hour

Essential Job Functions Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern; Performs all duties as assigned and adheres to TEAM's Core Values and 7 Critical Choices. Utilizes proper personal protective equipment. Follows the Rope Access Supervisor's or the Rope Access Lead Technician's directions. Displays a healthy respect for heights and follows all OSHA, site specific and Team safety procedures. Understands work permits and participate in job hazard analyses. Participates in required training, rope access certification sessions and maintains a working understanding of rope access safe working practices. Works in accordance with TEAM rope access policies and Rope Access Code of Practice. Inspects and verifies rope access systems and components before use. Recognizes worksite hazards and notifies the Rope Access Supervisor of any unsafe conditions. Maintains proficiency at rescue techniques and assist in rescues as directed and in accordance with certification level. Job Qualifications Minimum of a High School Diploma or equivalent Minimum 18 years of age. IRATA / SPRAT certification NDT/ NDE Certification preferred Travel required. Must have a capacity for work at height. Work Conditions Field duties require outdoor work in a plant atmosphere with varying weather conditions. Interaction with other crew employees, as well as supervisors and client personnel. Working in plant and/or shop areas around production machinery with extreme noise levels. Must be able to wear safety equipment as required by the safety department for personal protection. May be at more than one job site in a day and must be able to tolerate climate changes. May be required to travel out of town on a periodic basis. Physical and Mental Requirements Ability to lift and carry 75 pounds. Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking and stooping. Tasks may also include physically moving and setting up inspection equipment (maximum component weight +/- 50 lbs.). Climbing and working off of ladders, stairs, scaffolding and objects in excess of 100 ft. Working extended hours and standing for extended periods of time. Work in indoor and outdoor environments in conditions of extreme heat and/ or cold. Work in and near industrial hazards. Must be able to walk and climb except when performing non-field duties. Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively. Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations. Ability to maintain focus and multitask effectively. Exhibits sensible and responsible behavior. Must meet IRATA/SPRAT certification requirements

We are seeking a dedicated and reliable Field Technician to join our team in Corpus Christi, TX. As a Field Technician, you will play a crucial role in ensuring the cleanliness and proper functioning of dispensing cabinets, as well as maintaining positive customer relationships. Your responsibilities will include cleaning, recording data, reporting issues, and performing various tasks to enhance the customer experience. Job Duties Clean and sanitize dispensing cabinet sinks and surfaces, sterilize nozzles and handles, and perform water taste tests to ensure quality. Accurately record meter readings and pressure gauge data during service visits and promptly email collected data to the designated recipients within 24 hours of service performance. Immediately report any maintenance or technical issues observed during service visits to the appropriate channels. Cultivate and maintain positive relationships with customers and store management, addressing any concerns or inquiries professionally and courteously. Periodically replenish brochures, replace equipment signage, and take inventory of supplies to ensure a well-organized and informative setup. Capture photographs of equipment for documentation purposes, contributing to visual records of service visits. Undertake miscellaneous tasks as assigned to support the overall operations and customer satisfaction. Requirements Exhibit professionalism with excellent time management skills, demonstrating the ability to work independently and responsibly. Possess a Smartphone and proficiency in using email for communication and reporting purposes. Maintain physical capabilities, including the ability to bend, squat, and, if needed, climb stairs or ladders as part of the job tasks. Communicate effectively in English through email and phone interactions. Provide own transportation for on-site visits. Pay & Work Hours Compensation: $25.00 - $30.00 per service (each service typically takes less than an hour). Service Frequency: Every 7 days at 1 store-- with a 6-8 day allowable window for flexibility. Employment Type: 1099 Independent Contractor position, offering no benefits. Paid Training: Comprehensive training will be provided to ensure competence in all aspects of the role. Additional Information Interviews will be conducted via Microsoft Teams video conferencing platform. Job offers are contingent on the results from a background check. Applicants must be 18 years of age or older to be considered for this position. Please submit your resume with your application. If you are a proactive individual with excellent communication skills, a keen eye for detail, and the ability to work autonomously, we encourage you to apply for this exciting opportunity to make a positive impact in our customers' experiences and our planet!