Entergy jobs in Russellville, AR - 8209 jobs

**Work Place Flexibility:** Onsite **Legal Entity:** Entergy Operations, Inc.-EOI ***This role will be filled as App Fuel Services 1st year, Over 1 Year, Over 2 years, Over 3 years, Over 3 years with NANT/INPO Cert or a Journeyman Fuel Service Tech, depending on the candidate's experience.*** **JOB SUMMARY/PURPOSE** Performs reactor BWR and PWR disassembly/reassembly, dry fuel storage, and fuel handling activities, irradiated component handling and maintenance associated with equipment/tooling for the aforementioned activities. **JOB DUTIES/RESPONSIBILITIES** + Performs reactor disassembly and reassembly activities. + Performs New Fuel Inspection activities for both BWR and PWR. + Assist in Fuel Handling Equipment troubleshoot, and repair as needed. + Performs dry fuel storage activities. + Performs pre and post outage activities related to the outage refuel path. + Operates fuel handling equipment in the reactor and fuel handling buildings to support fuel movements and irradiated component handling. + Performs preventative and corrective maintenance on reactor disassembly/reassembly, fuel handling, and dry fuel storage equipment/tooling. + Performs technical reviews of procedures and other plant documents. + Supports dry fuel and refueling (pre-outage, outage, and post outage) activities across the fleet approximately 25% - 50% of the year. + Material Handling and Rigging, including operation of cranes and associated plant equipment (ie, Fork Trucks, Flat Beds, etc) **MINIMUM REQUIREMENTS** **Minimum education required of the position** Related work experience or military training with a High School Diploma or GED. **Minimum experience required of the position** Previous qualification with reactor disassembly/reassembly path, dry fuel storage, or fuel handling. **Minimum knowledge, skills and abilities required of the position** + Must possess a strong technical conscience in Refueling Services and Dry Fuel Storage, with a focus on Maintenance Fundamentals. + Must possess leadership qualities to promote team effectiveness and proficiency in the field with Entergy stakeholders and contractor personnel. + Must be knowledgeable in Nuclear power plant maintenance to include: rigging and material handling, electrical terminations, and torquing. + Must have the ability to read prints, verbal and written comprehension, and the ability to troubleshoot and then repair fuel services equipment. + Must be physically capable to ascend and descend ladders into and out of the refuel cavity to support reactor disassembly/reassembly. + Must be able to travel to other sites approximately 25% - 50%. **Any certificates, licenses, etc. required for the position** Previous refuel path, dry fuel storage, or fuel handling qualifications from another utility, vendor, or military. \#LI-MG1 **Primary Location:** Arkansas-Russellville Arkansas : Russellville **Job Function** : All Other Jobs **FLSA Status** : Nonexempt **Relocation Option:** No Relocation Offered **Union description/code** : ARKANSAS BARG. -- NUCLEAR **Number of Openings** : 1 **Req ID:** 122133 **Travel Percentage** :25% to 50% An Equal Opportunity Employer, Minority/Female/Disability/Vets. Please clickhere (**************************************************** to view the EEO page, or see statements below. **EEO Statement:** The Entergy System of Companies provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a protected veteran in accordance with applicable federal, state and local laws. The Entergy System of Companies complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment including, but not limited to, recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. The Entergy System of Companies expressly prohibits any form of unlawful employee harassment based on race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of the Entergy System of Company employees to perform their expected job duties is absolutely not tolerated. **Accessibility:** Entergy provides reasonable accommodations for online applicants. Requests for a reasonable accommodation may be made orally or in writing by an applicant, employee, or third party on his or her behalf. If you are an individual with a disability and you are in need of an accommodation for the recruiting process please click **here (humanr@entergy.com?subject=Accessibility)** and provide your name, contact number, the accommodation requested and the requisition number that you are requesting the accommodation for. Employee Services will contact you regarding your request. **Additional Responsibilities:** As a provider of essential services, Entergy expects its employees to be available to work additional hours, to work in alternate locations, and/or to perform additional duties in connection with storms, outages, emergencies, or other situations as deemed necessary by the company. Exempt employees may not be paid overtime associated with such duties. **Know Your Rights: Workplace Discrimination is Illegal (************************************************************************************************* The non-confidential portions of the affirmative action program for individuals with disabilities and protected veterans shall be available for inspection upon request by any employee or applicant for employment. Please contact ************************ to schedule a time to review the affirmative action plan during regular office hours. **WORKING CONDITIONS:** As a provider of essential services, Entergy expects its employees to be available to work additional hours, to work in alternate locations, and/or to perform additional duties in connection with storms, outages, emergencies, or other situations as deemed necessary by the company. Exempt employees may not be paid overtime associated with such duties. **Please note:** Authorization to work in the United States is a precondition to employment in this position. Entergy will not sponsor candidates for work visas for this position. **Job Segment:** Power Plant Operator, Nuclear, Power Plant, Electrical, Inspector, Energy, Engineering, Quality

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. MPC is an industry leading, dynamic company that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. MPC provides compensation, incentives and benefits that allow our employees to build careers - not just work a job. “2022 & 2023 Top Companies for Women to Work For in Transportation” Awarded by the official magazine of the Women In Trucking Association. Job Description Marathon Petroleum Company LP (MPC) has a position available for a professional, local (home daily), transport driver. Our drivers are responsible for the safe and efficient delivery of petroleum products from various loading locations to various delivery points and customers. Transport drivers independently follow policies, procedures, and standards. Marathon transportation has one common vision: no accidents, no injuries, while being good stewards of the environment. Inclusive Benefits. Local Routes. Safety First. Outstanding Training. Click Here for more reasons why MPC is the last stop for many drivers. Benefits Hourly Rates: $30.72 - $32.47 Insurance: Health/Dental/Vision coverage available day 1 Retirement: 401k with company match up to 7% Pension: Company funded pension plan up to 11% Annual bonus: Eligible for company sponsored annual bonus. Paid parental leave. Education reimbursement For full benefit details visit ********************* Minimum Qualifications Active Class A Commercial Driver's License Must maintain a satisfactory driving record and provide consent to company for review of driving record(s). Must register with FMCSA Drug & Alcohol Clearinghouse and provide consent to company for review of clearinghouse records. Must be able to drive interstate. Active CDL Endorsements: Hazardous Materials and Tank Vehicle (Required) License - Restrictions: Operate manual and/or automatic transmission. Shift Requirements Must be able to work up to a 12-hour AM/PM shift. Must be able to work hours beyond schedule Job Responsibilities Perform pre-trip inspection on equipment in alignment with MPC policy and Department of Transportation (DOT) regulations. Check tank truck/trailer or tractor/trailer for general operating requirements and make sure that all required equipment is available and in good operating condition. Note inspection and deficiencies on the pre-trip inspection form. Drive a tank truck/trailer or tractor/trailer to transport product in a safe, efficient, and professional manner. Obey all applicable federal, state and local laws. Follow MPC and site specific standard operating procedures for the loading and offloading process. Perform post-trip inspection on equipment in alignment with MPC policy and DOT regulations. Complete all regulatory and customary paperwork. Ensure equipment is ready for the next shift. Communicate all incidents, including safety and environmental concerns, according to company procedures. Report all equipment issues in a timely manner. Follow, maintain, and adhere to all safety rules and operating procedures, including all DOT regulations. Physical Requirements Must be able to work outside in all types of weather conditions. Must be able to work on elevated spaces: 30+ feet on graded elevation. Must be able to frequently lift, carry, push, and/or pull 50-65 lbs. Must be able to sit for extended periods of time. Must be able to grip a steering wheel for extended periods of time. Screening Requirements Must maintain a satisfactory driving record and provide consent to company for review of driving record(s). Must pass required drug and alcohol screening(s). Must complete DOT physical and maintain current medical card. Must pass three-year DOT safety background check and seven-year criminal background check. Must pass pre-trip exam and road test to demonstrate proficiency operating required equipment. #TR As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Garyville, Louisiana Additional locations: Job Requisition ID: 00019983 Location Address: 4663 W Airline Hwy Education: Employee Group: Full time Employee Subgroup: Regular Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here. If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at ***************************************. Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at ***************************** hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role.

As a subsidiary of Hanwha Energy, a global energy solutions company, Hanwha Convergence USA Corp. provides reliable Smart Factory Solution, Factory Automation, and renewable energy O&M (Operations and Maintenance) services to semi-conductor manufacturing as well as solar PV & battery energy storage system (BESS) power generation clients. Hanwha Convergence is an affiliate of Hanwha Group, which is the 7th largest business conglomerate in Korea. Hanwha Group is a world leader in solar energy and a Fortune Global 500 company. Position Summary:. We are seeking a strategic and technically proficient Technical Operations Manager to support and enhance the performance of Hanwha Convergence Operations & Maintenance (O&M) Division. This role is responsible for analyzing O&M operations, optimizing productivity and efficiency, and driving continuous improvement through SOP development and performance insights. The ideal candidate will serve as a key liaison between field operations, business development, and R&D teams to ensure operational excellence across all solar O&M initiatives. Attention external recruitment firms, we will not accept any unsolicited resumes at this time. Please do not contact any internal member of our company to discuss the position or to solicit candidates. Essential Duties and Responsibilities: Team Leadership & Department Oversight Lead and manage the Technical Operations Group, including direct supervision of group members. Define team objectives, allocate tasks, and ensure efficient collaboration across functions to support O&M operations. Oversee professional development, performance evaluations, and resource planning for technical staff. Operations Performance & Process Improvement Analyze overall O&M operations, productivity, and efficiency within Hanwha Convergence's O&M Division. Oversee and manage key performance indicators (KPIs) for power plant performance (Availability Guarantee, Performance Ratio and more), ensuring alignment with internal targets and customer expectations. Establish standard operating procedures (SOPs), performance objectives, quality control standards, and operational policies. Coordinate with internal business development and O&M teams to drive improvements through performance analysis. Field Operations & Commissioning Support Lead implementing O&M Contract obligations on performance reports. Work closely with the Remote Operations Center (ROC) for the implementation of daily customer reports and updates. Coordinate field operations and support the commissioning process for new solar PV, BESS plants and facilities. Analyze system integrity and operational efficiency, underperformance issues for customer-owned assets. Lead and support O&M analysis projects and assist corporate clients in implementing system and technology updates. Technology & Trend Analysis Conduct technology trend analysis related to utility-scale O&M and green energy control systems. Facilitate technical feedback between Hanwha Convergence field teams and the R&D team at headquarters to drive continuous improvement in service quality. Technical Marketing & Customer Interface Support business development teams with data-driven insights related to customer O&M needs and expectations. Assist in preparing technical recommendations, performance reports, and business development proposals. Collaborate with customers' technical teams to ensure alignment between their operational goals and Hanwha Convergence's service capabilities. Education and/or Experience Requirements: Bachelor's degree in Engineering, Renewable Energy, or a related technical field preferred. Experience leading technical teams or overseeing cross-functional project teams is strongly preferred. 5+ years of experience in solar energy, BESS operations, technical analysis, or O&M coordination. Familiarity with PV, BESS systems, commissioning processes, and performance analysis tools. Strong communication, organizational, and cross-functional coordination skills. Proficient in Excel, project management tools, and data reporting platforms is a must. Working knowledge of industry standards, codes, and safety regulations (e.g., NERC CIP) is a plus. Ability to interpret SCADA data, performance KPIs, and generate actionable insights from large data sets. Self-motivated, proactive, and able to manage multiple priorities in a fast-paced operational environment. Hanwha Convergence is proud to be an at-will Equal Opportunity Employer and prohibits discrimination against race, color, religion, sex, sexual orientation, gender perception or identity, national origin, age, marital status, pregnancy, citizenship, disability, protected veteran status and any other classification protected by applicable federal, state or local law. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. We are committed to the full inclusion of all qualified individuals. As part of this commitment, Hanwha Convergence will provide reasonable accommodations to all qualified individuals with disabilities to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment. Please contact us to request accommodations. Nothing in this statement shall imply implicitly or explicitly a guarantee of employment outside our at-will employment opportunity. You may view your privacy rights by reviewing Hanwha Convergence Privacy Policy here or contacting our HR Team for a copy.

JOB TITLE HR Office Coordinator (Part-Time) THE ORGANIZATION Solutions. People. Energy. These three words define how we work together to create impact. Our members gain access to premier programs, content, and events designed to accelerate professional growth and career development, while fostering a strong network and sense of community. SPE employees are proud to contribute to a community that's making a difference globally! From our beginning in the early 1900's, SPE has grown to nearly 132,000 members in 146 countries. SPE is a 501(c)(3) not-for-profit organization with operations around the world. SPE maintains offices in Calgary, Dallas, Dubai, Houston, and Kuala Lumpur. Visit our website for more information about life as an employee with SPE: ******************************** THE OPPORTUNITY The People & Culture Office Coordinator will assist the Houston office in HR, administrative, and support duties. This part-time opportunity is perfect for anyone who prefers to work in an office environment for 4-5 hours daily (20-25 hours weekly).Hours can be somewhat flexible, for example 9am-2pm is perfect for parents needing flexibility for school drop-off and pick-up or college students who need a flexible schedule to accommodate classes. This role is ideal for entry-level candidates eager to develop human resource and office administrative skills OR individuals seeking to bring their experience to a part-time role. This role will expose you to the work of a non-profit organization including interfacing with executives, boards and committees. THE IMPACT YOU WILL MAKE IN THIS ROLE Serve as Houston office coordinator including screen calls directed to the Houston office, relay messages, and greet visitors General upkeep of office tasks, including coordination of mail/shipping and monitoring monthly postage expenses vs. budget for Houston office Upkeep the office space, including meeting and kitchen areas which includes cleaning and maintaining the appliances (coffee machines, water filtration machines, ice maker, refrigerators, microwaves). Monitor inventory and order, track, receive, unpack, store and restock Houston office and kitchen supplies Run logistics for meetings in the Houston office including restocking coffee and beverages, ordering and receiving catering, general set up (moving tables and chairs to set up room layout), and clean up Liaise with building management on maintenance requests, repairs, safety, access card system, our reservation of additional meeting space, rent invoices, and any other issues Schedule and monitor maintenance on fire extinguishers and AED's Represent the Houston office on the SPE Safety Team;as Fire Warden for the suite, participate in scheduled fire drills and submit paperwork to the building management Attend to special Human Resources projects as requested including termination support for departing employees and collecting laptops, access badges, etc. on their last day YOUR SKILLS AND EXPERTISE High school diploma or GED required with 1-3 years of HR, administrative or office experience Intermediate skills and recent experience with Microsoft Office Suite Familiarity with basic HR processes, such as onboarding, maintaining personnel files, and coordinating training or compliance documentation Exposure to working within a budget and tracking expenses Capable of meeting goals related to safety Strong understanding of issues that require careful handling and maintaining confidentiality Familiarity with overall office maintenance and office building management coordination including tasks such as building/office access, mail distribution, office supply inventory, office equipment upkeep, mailing/shipping setting up, maintaining door access and mail distribution ADDITIONAL ATTRIBUTES FOR SUCCESS IN THIS ROLE Excellent communication skills (oral and written) Strong organizational skills, with the ability to manage multiple Demonstrated flexibility with the ability to easily work with many different people in different departments and functions, local and globally Self-motivated with ability to work independently with little supervision Able to work in an office environment and commute to our office located at 10777 Westheimer Road, Houston, 77042 BENEFITS AND PERKS Due to the part-time status of this role, benefits are limited. To avoid delays in considering your application, please complete all questions within the application including your expected salary range for this role. Society of Petroleum Engineers is an Equal Opportunity Employe r We welcome diversity in our workforce and encourage all qualified applicants to apply.

For over 80 years, Oil States Industries, Inc. has been a highly respected technology and solutions pioneer manufacturing diverse products for offshore platforms, subsea pipelines, defense, and general industrial applications. Oil States Industries, Inc. recognizes that our diverse workforce is our greatest asset. We offer a competitive compensation, including paid time off, health insurance eligibility on the first day of employment. Paid time off includes vacation, holiday and sick time. Benefits include medical, dental, vision, 401k, life insurance, long and short term disability, and flexible spending accounts. When we contribute to the company's success, we all win. Come join us! Oil States is looking for candidates for the position of Process Control & Instrumentation Tech. POSITION SUMMARY: With minimal supervision, supports the Company's instrumentation-based offshore Tendon Tension Monitoring System (TTMS) product line following training program. Program and build electronic control and data acquisition platforms for production and test equipment. Provide technical support to the engineering and manufacturing departments. Train employees on control systems. Help ensure that Oil States produces quality products that meet or exceed the customer requirements. ESSENTIAL DUTIES AND RESPONSIBILITIES: The following essential duties and responsibilities make up 75% of this role. Design and build panels and electronics for data acquisition and process control equipment Write software programs for data acquisition and process control equipment. Maintain and troubleshoot existing equipment controls Perform cost estimates, prepare quote requests, and select vendors. Select and procure components, sensors, and instrumentation as required Generate process plans and program logic based upon operation procedures and process requirements Work with machining vendors to produce hardware and tooling as needed Provide instruction and training as needed to subordinates and production personnel. Maintain calibration and logs of transducers and instrumentation used on manufacturing equipment Organize, document, and maintain control program software within our document control system Assist engineering and the test lab with design and development of test control and data acquisition systems Produce electrical schematics and process flow charts Troubleshoot production processes Perform other duties assigned by supervisor. The following essential duties and responsibilities make up 25% of this role. Provide telephone support and system troubleshooting to existing installations. Travel to offshore equipment installations when required. Repair and/or recalibrate customer equipment in the product Laboratory. Assist with system modifications and new product development. Assist with new installation manufacture, assembly and deployment. QUALIFICATION REQUIREMENTS: HS Diploma with at least 5 years' experience with process controls design and programming. Experience in mechanical and electrical systems maintenance. However, will also consider BS in Mechanical, Electrical, or Industrial Engineering with slightly less experience. Programming experience with Labview process control software. Familiarity with hydraulic power and control systems Familiar with material proprieties and machine shop fabrication practices. Ability to interpret and describe technical information. Comprehensive computer skills such as Word and Excel. Experience with AutoCAD or AutoCAD Electrical Field service experience with ability to make independent, informed decisions with minimal supervision. Good interpersonal skills. Commitment to safety Must be able to work various hours on nights and weekends when needed TECHNICAL SKILLS (up to 25%) Test Equipment Familiarity with standardized test procedures and concepts. Familiarity with data acquisition and control systems and principles. Reduce and interpret test data. Field Service Must be available for customer support by telephone. Ability to troubleshoot problems by telephone or in person, at remote locations. COMPUTER SKILLS Experience working across multiple Microsoft operating systems (e.g., Windows 10/11, Widows Server). TRAVEL AND WORKING CONDITIONS (Up to 25%) Work without supervision for extended periods of time. Travel is required, including offshore and international. May require extended travel periods of up to 30 days. May required travel on short notice and for unspecified durations. Make own travel arrangements, balancing cost with schedule requirements and budget constraints. Mode of travel may include automobile, airplane, boat, or helicopter. Work in elevated work areas and confined spaces with proper PPE. Perform work assignments in hazardous environments, including offshore installations. Work outside, in extreme weather conditions (cold, heat, humidity, wind). Must obtain and maintain the following certifications: Valid US passport. Transportation Worker Identification Credential (TWIC). Helicopter Underwater Egress Training (HUET). Offshore Water Survival Training. Safe Gulf Orientation. Other certifications or training as required by Customer. PHYSICAL REQUIREMENTS Occasional lifting up to 50 lbs. Prolonged sitting. Must be physically capable of climbing ladders, occasionally working outside in extreme temperatures, and in confined or restricted areas. CITIZENSHIP REQUIREMENTS - By contractual requirements, the project and job location for this position requires that all persons establish proof of US Citizenship. Dual Citizenship (US citizenship and citizenship of some other country) cannot be accepted. You will be required to provide original or certified copies of documents establishing your citizenship prior to consideration for this position. Be part of what's next at Oil States Industries, Inc.! Over 80 years in business An Equal Opportunity Employer An E-Verify Employer Un empleador de E-Verify Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

The Electrician & Maintenance Technician will assist production and maintenance with achieving NOV's daily KPI goals by troubleshooting and maintaining production equipment, as well as provide training for production supervisors, operators and maintenance personnel on an ongoing basis. This role will also assist with operational activities that support the manufacturing process, by providing skilled mechanical and electrical / electronic support to all areas of manufacturing, while maintaining all NOV Quality and Safety measures. PRIMARY DUTIES & RESPONSIBILITIES Knowledge of electrical & mechanical controls Calibrate various equipment Troubleshoot electrical & mechanical problems and/or equipment Knowledge of electrical, pneumatic, and hydraulic schematics Perform preventative maintenance on equipment Repair electrical equipment safely and as quickly as possible after a breakdown Work on assigned projects Install new equipment Utilize safe work habits Wear appropriate PPE Comply with all NOV Company policies, guidelines and procedures Comply with all HSE policies, guidelines and procedures Comply with all Quality policies, guidelines and procedures JOB REQUIREMENTS Ability to read pressure gauges Ability to work overtime and shift work as required Ability to read labels on pipe along with specs on paper Standing up to 12 hours daily Walking up to 12 hours daily Bending/Stooping up to 12 hours daily Repetitive movement up to 12 hours daily Push/Pull up to 12 hours daily Lifting weights up to 50 lbs. regularly Good vision required for safe operation of forklift Utilize recommended safe work habits and make use of all safety equipment provided Assist with OJT (On Job Training) employees as needed Work inside and outside Assist where and when as required EDUCATION & EXPERIENCE QUALIFICATIONS High School diploma or equivalent Electrical license, electrical controls experience and/or certification Forklift license Three years of verifiable work experience Ability to read and design electrical prints Ability to read, write and speak English preferred BEHAVIORAL COMPETENCIES Dependability/Attendance Thoroughness Problem Solving/Judgement TECHNICAL COMPETENCIES Computer, PLC hardware and software, inverter drivers, photo-eyes, proximity switches, counters, level sensors, controllers and any other equipment requiring a computer or controls basis interface. Multimeter, Amprobe, and hand tools. Forklifts, scissor or bucket lifts. Safety harness, LOTO equipment and any other safety equipment required by NOV, FGS, and OSHA. Electrical disconnects, subpanels, and main switchgear to aid in the troubleshooting process. Familiar with all components capable of production and storing energy so the interaction of these components as it pertains to the production equipment and safety can be maintained and operated in a safe and productive manner AC and DC controls Programmable controllers Knowledge of temperature controllers, electronic controllers, tachometers and PLC's Ability to adapt and be cross-trained to learn all job duties as required Ability to learn technical repair and assembly guidelines and procedures Ability to work in a fast-paced environment Ability to read drawings, instructions or repair and assembly operations NOV is an equal opportunity employer. This job description is subject to change without notice. This description is intended to explain the general nature and level of work being performed by people assigned to this position. It is not intended to be an entire list of all activities, tasks and skills required of people in this position. Every day, the oil and gas industry's best minds put more than 150 years of experience to work to help our customers achieve lasting success. We Power the Industry that Powers the World Throughout every region in the world and across every area of drilling and production, our family of companies has provided the technical expertise, advanced equipment, and operational support necessary for success-now and in the future. Global Family We are a global family of thousands of individuals, working as one team to create a lasting impact for ourselves, our customers, and the communities where we live and work. Purposeful Innovation Through purposeful business innovation, product creation, and service delivery, we are driven to power the industry that powers the world better. Service Above All This drives us to anticipate our customers' needs and work with them to deliver the finest products and services on time and on budget.

GA's Electromagnetic Systems (EMS) Group focuses on the military and commercial applications of advanced electromagnetic technologies, including power generation and distribution, magnetic levitation, laser and weapons systems, and systems design and engineering. The EMS Group supports government customers, which include the Department of Defense, Department of Energy, the Department of Transportation as well as a range of commercial customers. We have an exciting opportunity for a CNC Applications Specialist to join our team in Tupelo! Under only general direction, this position is responsible for developing and writing programs for computer numerically controlled (CNC) machines using engineering specifications and drawings. Reviews engineering drawings to define configuration of parts and determine type and sequence of machine operations. May independently determine proper cutter selections for each part, taking into consideration such factors as speeds, types of cutters, feeds, and control system limitations. Contributes to the development of solutions to a range of difficult technical problems to ensure deadlines or schedules are met. DUTIES AND RESPONSIBILITIES: Develops programs for machining parts, tools, or sheet metal on computer numerically controlled (CNC) machine tools. Participates in determining program routines for the most efficient computer calculation of dimensional and machining requirements for each part. Tests and modifies existing parts programs for engineering changes or program improvements. Participates in the preparation of department documentation, including operational instructions and/or standard procedures. May be the primary contact with supplier and vendors. May give direction to less experienced professional staff. Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company. Expected to work in a safe manner in accordance with established operating procedures and practices. Other duties as assigned or as required. We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply. Job Qualifications Typically requires a bachelor's degree in computer programming or a related field and five or more years of progressive experience in programming computer numerically controlled (CNC) machines. Equivalent professional experience may be substituted in lieu of education. Must demonstrate a complete understanding of CNC application principles, theories and concepts, and must have leadership skills including organizing, scheduling, and coordinating work assignments to meet project milestones or established completion dates. Must possess the ability to contribute to the development of new processes, and resolve a variety of difficult technical matters. Must be customer focused and possess: The ability to identify issues, analyze and interpret data and develop solutions to a variety of complex problems Excellent analytical, verbal and written communication skills to accurately document, report, and present findings Excellent interpersonal skills to guide employees The ability to initiate, plan, and manage projects The ability to represent the company as a knowledgeable resource on external projects Excellent computer skills Ability to work independently or in a team environment is essential as is the ability to work extended hours and travel as required.

For over 80 years, Oil States has been a highly respected technology and solutions pioneer manufacturing diverse products for offshore platforms, subsea pipelines, defense, and general industrial applications worldwide. Oil States recognizes that our diverse workforce is our greatest asset. We offer a competitive compensation package, including paid time off as well as health insurance eligibility on the first day of employment. Paid time off includes vacation, holiday and sick time. Benefits include medical, dental, vision, 401k, life insurance, long and short-term disability, and flexible spending accounts. When we contribute to the company's success, we all win. In our organization, the Welding Engineer has a critical and challenging role in helping achieve innovation and meeting our commitments. POSITION SUMMARY: With direct supervision, provide manufacturing engineering support for new and existing production in terms of manufacturing and testing equipment, equipment controls, handling and mold tooling, HSE, materials and process needs. Products include compression and injected molded rubber components for shock and vibration isolation mounts, laminated elastomer bearings, industrial clutch and brakes, and elastomeric seals. Requires coordination with operations, design engineering, quality and project management. Some interface with tooling and equipment vendors may be required. ESSENTIAL DUTIES AND RESPONSIBILITIES: Develop a working knowledge for each assigned project Manufacturing processes and associated documents that support these processes including manufacturing specifications, shop travelers and manufacturing inspection planning CAD software and tooling design codes GD&T principles Drawing formats and procedures Manufacturing and Testing equipment HSE requirements as applies to safety of equipment and processes Review design bases and reports, test plans, material specifications and any other necessary technical documents Equipment control systems Polymer material properties in terms of molding and processing Take initiative and recommend process and/or material improvements Assist with Material Review Board activities Other duties as assigned QUALIFICATION REQUIREMENTS: Bachelor or Masters in Mechanical Engineering or related degree with at least 0-2 years of direct experience; or at least 6 years of direct experience without a degree Basic knowledge or some experience using SolidWorks 3D CAD and AutoCAD 2d CAD a plus Basic knowledge of polymer molding processes a plus Effective organizational skills Work independently and handle multiple tasks. Exhibit effective written and oral communication Effective interpersonal skills PHYSICAL REQUIREMENTS: Use of a computer, including a telephone and other office equipment Prolonged sitting and standing Moderate bending, stooping, walking, climbing stairs. Some limited lifting Some climbing, elevated work. Must be able to work in high and/or low temperature production environments for extended periods CITIZENSHIP REQUIREMENTS - By contractual requirements, the project and job location for this position requires that all persons establish proof of US Citizenship. Dual Citizenship (US citizenship and citizenship of some other country) cannot be accepted. You will be required to provide original or certified copies of documents establishing your citizenship prior to consideration for this position. Be part of what's next at Oil States Industries, Inc.! Over 80 years in business An Equal Opportunity Employer An E-Verify Employer Un empleador de E-Verify Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Calpine Corporation is America's largest generator of electricity from natural gas and geothermal resources with operations in competitive power markets. Its fleet of 77 power plants in operation represents over 27,000 megawatts of generation capacity. Through wholesale power operations and its retail businesses, Calpine serves customers in 22 states and Canada. Its clean, efficient, modern and flexible fleet uses advanced technologies to generate power in a low-carbon and environmentally responsible manner. The company was established on the premise that a strong commitment to the environment is inextricably linked to excellence in power generation and corporate responsibility. Since its founding in 1984, Calpine has led the power industry in its unwavering commitment to environmental stewardship. In addition, its renewable geothermal plants use steam generated deep below the earth's surface to produce clean, renewable electricity. Job Summary (includes but is not limited to the following, other duties may be assigned) This position is primarily responsible for managing DOT regulated pipeline compliance and security (TSA) for Calpine's Pipeline operations in CA, TX, OR and AZ. The Pipeline Compliance Manager develops and reviews pipeline procedures ensuring they conform to Federal and State regulations, industry practices, and related standards. Major programs include Operations and Maintenance, Integrity Management, Operator Qualifications (OQ), Emergency Response, and Public Awareness. This position manages third party regulatory compliance, safety, and environmental consultants as needed for conducting compliance activities. This position develops and conducts employee training and drills or tabletop exercises for pipeline emergency response, The ideal candidate for this position will be highly self-motivated and able to work independently to maintain the highest levels of safety and compliance and will have excellent verbal and written communication skills. Key Responsibilities Maintain in-depth knowledge of TSA Pipeline Security Guidelines and Directive requirements related to pipeline operations Manage pipeline site security program in accordance with TSA and corporate security requirements, including security vulnerability assessments, site criticality determinations, and implementation of security recommendations and site improvements Track and interpret DOT pipeline regulatory changes and implement program and procedure updates accordingly Develop and conduct pipeline emergency response training and drills at 16 DOT pipeline sites in CA, OR, AZ and TX Manage environmental compliance programs including hazardous materials/waste, SPCC, emissions monitoring, air permits Develop and maintain safety procedures and ensure compliance with applicable state and federal requirements Coordinate and track training both on-line and in-person to ensure compliance with applicable environmental, health and safety programs Maintain thorough knowledge of Pipeline Safety, Environmental, and Occupational Safety regulations at state, federal, and local level, as well as company programs to comply with those regulations Seasoned professional with advanced applied experience with full understanding of company and industry practices Provides leadership and works with management on identified Pipeline Safety, Environmental and Occupational Safety issues/recommendations/opportunities to foster continuous improvement of Calpine's Pipeline operations Provides advocacy and management of Pipeline Safety Compliance matters and limited responsibility for environmental and occupational safety regulatory development matters Makes decisions on complex issues regarding project and operational components and advanced tasks; makes recommendations on new procedures, tools and services; supports and contributes to development of new products, services or techniques Leads the research for innovations from external sources, and identifies opportunities to develop new processes and/or programs to ensure organization remains compliant Uses independent judgment on matters of significance in the areas of compliance, safety, and environmental conditions and practices Works on problems of increasing complexity (range from moderate to complex) Exercises discretion and uses independent judgment requiring in-depth analysis of variable factors. Collaborate with senior professionals in selection of methods, techniques, and analytical approach Little instruction on day-to-day work, general instructions on new assignments Serves as lead for development and execution of Pipeline Compliance and Safety programs Regularly coordinates work of professionals, technicians and others outside of own department Trains and mentor's employees on compliance, safety and technical skills Collaborate and solve problems - works with others to resolve significant issues, clarify or interpret complex information, provide initial screening/negotiations Builds professional networks, initiating contact with resources to achieve goals Regularly conducts training sessions and emergency response drills Job Requirements Bachelors' Degree, preferably in Environmental Services, Health or Safety Sciences, Technology/Engineering and 10+ years' experience or an equivalent combination of education and/or related experience Knowledge of applicable sections of federal, state and local rules and regulations to include PHMSA (including State versions), HAZWOPER, SARA, OSHA, Clean Air Act, AQMDs, CA Air Resources Board (CARB), Clean Water Act, SPCC Excellent verbal and written communication skills for interacting efficiently with both internal teams and external regulatory agencies Ability to analyze technical and regulatory information, make sound judgments, and provide prudent recommendations to all levels within the company Effectively manage third party compliance and environmental firms. Must be able to travel approximately 30% of the time Additional Calpine Information Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities. Calpine is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with physical and/or mental disabilities. If you are interested in applying for employment and need special assistance or an accommodation to use our website or to apply for a position, please send an e-mail with your request to *************************. Determination on requests for reasonable accommodation are made on case-by-case basis. Please view Equal Employment Opportunity Posters provided by OFCCP here

General Atomics Electromagnetic Systems (GA-EMS) designs and manufactures first-of-a-kind electromagnetic and electric power generation systems. GA-EMS' expanding portfolio of specialized products and integrated system solutions support critical fleet, space systems and satellites, missile defense, power and energy, and process and monitoring applications for defense, industrial, and commercial customers worldwide. We have an exciting opportunity for an Industrial Mechanic to join our team in Tupelo! Under limited supervision, this position is responsible for servicing, modifying, rebuilding, and repairing industrial mechanical, electrical, hydraulic, and HVAC equipment in accordance with applicable codes, technical documentation, and safety regulations. Performs periodic inspections to identify potential equipment issues and prevent breakdowns. Troubleshoots electrical, hydraulic, and HVAC systems. Interprets and works from schematics. Sets and adjusts controls. Overhauls equipment as needed. DUTIES AND RESPONSIBILITES: Troubleshoots and repairs industrial machinery, including conveyors, gearboxes, pumps, motors, hydraulic presses, and HVAC equipment. Reads and applies electrical and hydraulic schematics to perform diagnostics and repairs. Installs, maintains, and repairs hydraulic and pneumatic systems including valves, cylinders, hoses, and pumps. Installs, troubleshoots, and maintains electrical systems including motors, sensors, relays, and control panels. Performs periodic inspections and preventive maintenance to reduce downtime and extend equipment life. Performs minor fabrication and welding tasks in support of maintenance and repair activities. Assists with the installation or modification of equipment and supporting infrastructure. Completes maintenance documentation and equipment service records as required. Expected to work in a safe manner in accordance with established operating procedures and practices. May perform facility utility maintenance such as compressed air, water, or process plumbing systems. May participate in operating and identifying issues with Digital Controls or basic PLC systems. Other duties as assigned or required. We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply. Job Qualifications Typically requires a high school diploma or equivalent, military class 'C' school or Military Occupation Specialty (MOS), and five or more years of progressive experience as an apprentice plumber or HVAC mechanic. Equivalent professional experience may be substituted in lieu of education. Must have knowledge of industrial mechanical systems, hydraulic circuits, electrical control systems, and HVAC equipment. Must be able to read, interpret, and apply mechanical, hydraulic, electrical, and HVAC schematics and documentation. Must have working knowledge of safely operating hand and power tools. A valid driver's license with a good driving record verified by the DMV Ability to perform diagnostics and repairs using technical manuals and schematics Interpersonal skills to work with employees, vendors, and contractors

The Fitter Welder II is responsible for welding and fitting jobs and making sure all weldments are welded within the right welding procedures and built to print in a timely manner. Based in Fort Worth, this position will report to the Team Lead and/or Supervisor of the department and will often work alongside other members of the manufacturing team. PRIMARY RESPONSIBILITIES Perform welding tasks effectively using FCAW and GMAW in horizontal and vertical positions. Read and interpret basic engineering drawings. Heat form and dress metal parts using hand tools, torch, or arc welding equipment. Properly process necessary information on production routers. Perform assigned tasks under the direction of supervisor. Bring technical problems encountered to supervisor. Responsible for using safe working practices and for the safe operation of welding machines and equipment. Work to improve efficient to achieve productivity and delivery goals. Comply with all NOV Company and HSE policies and procedures. Maintain a clean & organized work area; utilize safe work habits. Perform other work-related tasks as assigned. EDUCATION & EXPERIENCE QUALIFICATIONS High school diploma or GED preferred. Must have a minimum of 1 - 3 yrs of experience with proficiency in the welding field. Must have related experience in operation of welding equipment available in fabrication department. Experience using a cutting torch, and plasma torch. Must be familiar with SMAW and GMAW welding processes, competent reading, and interpretation of fabrication blueprints. Experience with lay out and fit up of weldments and/or inspection of weldments. Proficiency with computers, Microsoft Word, Excel and other necessary applications. JOB REQUIREMENTS Ability to pass a drug screen & background check. Must be familiar with SMAW and GMAW welding processes, competent reading, and interpretation of fabrication blueprints. Must be able to maintain proper organization on documentation and work areas, follow all company policies and safety measures. Ability to read and comprehend simple instructions, correspondence, and memos. Ability to apply commonsense understanding to carry out written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Able to work well in a team environment as well as self-directed when working independently. Ability to adapt and be cross-trained to learn all job duties. Ability to multitask in fast paced environment. Factory environment with large range in temperature changes. Ability to stand, walk, bend/stoop, push/pull and repetitive movement up to 12 hours daily. COMPETITIVE BENEFITS (visit usbenefits.nov.com for more information about our benefits offerings) 401(k) Retirement Plan - NOV matches every dollar up to 5% of base pay and overtime for every dollar you invest. Competitive medical plans that cover your entire family (yourself, eligible spouse, and eligible children) as of your first date of hire for as little as $142 per pay period (bi-weekly.) FREE preventative medical and dental care for the entire family (when enrolled in an NOV medical/dental plan and seeing an in-network physician). FREE Basic Life and AD&D insurance (for full-time employees). All regular full-time employees start with 3 weeks of paid vacation per year (prorated based on start date). All regular full-time employees receive up to 11 paid holidays per year.

Aethon Energy Operating LLC's (“Aethon”) Sr. Lease Analyst is responsible for the analysis of leases, contracts, title opinions and other legal documentation to determine ownership in and ensure compliance with lease and contract obligations. DUTIES & JOB RESPONSIBILITIES: Set up, review, update and thoroughly and accurately analyze leases for developed and undeveloped assets and the same for mineral deeds, assignments, and various other contracts, with limited or no supervision Generate a variety of lease ownership reports as to depth, description, expiring acreage, gross/net acres, and payments - this is more senior work and not regular lease analyst work Monitor leases, contract obligations, and expirations Run calendars and pay rentals and extensions. Determine and make minimum royalty and complex shut-in payments For Texas leases, work with Unit Designations, Landmen and brokers to identify and tract out unit acreage in Enertia to accurately tie wells to the appropriate acreage For other leases, work closely with Division Order Analysts and Landmen to identify ties to wells, units and title issues Demonstrate proficiency in researching mineral interest owners from deeds, title opinions, conveyance documents and various title documents to process changes in mineral, royalty, and working interest Manage acquisition/conversion data setup and cleanup (determine and/or verify ownership, legal description, acreage, etc.) in assigned area of responsibility Support due diligence activities related to oil and gas property acquisition, divestiture, and mergers Oversee work done by contractors and brokers to ensure accuracy, and mentor less experienced land admin personnel Coordinate and communicate across departments and with landowners, governmental agencies, and field office personnel on issues Prepare Releases of Oil and Gas Leases and Assignments QUALIFICATIONS: Education & Work Experience: Bachelor's degree in Accounting, Finance, Economics, Energy Management, or equivalent land experience At least five years of related experience as a Lease Analyst or other land-related discipline. Technical Skills & Knowledge: Working knowledge of Haynesville assets Proficient at input and reporting in Enertia Land System Intermediate to Advanced proficiency in Microsoft Office (Word, Excel) Personal & Soft Skills: Ability to work in a fast-paced environment, prioritizing and working on numerous projects at the same time while balancing timely results with accuracy and attention to detail High level of motivation, self-starter Physical & Other Requirements: Must be eligible to work in the United States and have a valid driver's license Successful candidate will be able to meet company standard background check specific to individual role prior to employment and will be subject to Company Drug & Alcohol Program Position is an indoor office position which will require remaining in a stationary position, often sitting or standing for prolonged periods of time WE OFFER: Premiums for health, dental, and vision insurance for employee and children are 100% paid for by Aethon and premiums for spouse are 75% covered. 401k match 100% up to 7% of annual base salary Health Advocate to assist navigating your medical, dental, and vision insurance Company provided: Basic Life and AD&D Insurance Short- and Long-Term Disability Insurance Flexible telecommuting schedule (currently WFH on Monday and Friday) Paid Time Off 10 paid holidays annually Casual dress code Unlimited access to workout facilities within the building Wellness program with earned incentives for completed activities Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Employees must be willing and able to perform other duties as assigned. Duties, responsibilities, and activities may change at any time with or without notice. This position is subject to a Non-compete. Unfortunately, due to the high volume of applications, we are unable to acknowledge every applicant. Aethon does not accept unsolicited resumes from recruiters or employment agencies. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement and approved engagement request, Aethon reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Aethon is an equal opportunity employer. We are committed to the principles of being an equal opportunity employer and to providing our employees with a work environment free of discrimination and harassment. All employment decisions are based on qualifications, merit, and business need.

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Clean Products Trading is part of the Commercial organization, a cross-functional organization integral to maximizing refining output value for MPC while meeting customer demands. Clean Products Trading actively trades all US domestic trading markets and with an increasing presence internationally. Clean Products Trading interface externally executing purchases, sales, buy-sells, and exchanges for finished gasoline and distillate as well as gasoline and diesel components dictated by refinery economics marketing demands, market conditions, and logistics to maximize economic margin consistent with safe supply chain operations and other MPC core values. This position should be viewed as a growth opportunity for a highly motivated individual that has a strong aptitude and a keen interest for a commercial career. This role will provide an opportunity for the successful candidate to gain an understanding of the clean products supply and trading while performing a complex and critical function. Key Responsibilities Collectively responsible for the USGC diesel, jet and high sulfur distillate trading desk as well as support to the broader MPC distillate team. Continuously reviews market conditions and the short-term supply and sales plans; recommends and implements changes to the plan to optimize overall value to MPC (product yield shifts, sales channel shifts, import/export changes, etc.). Evaluates and executes discretionary trade and business development opportunities beyond the core business (storage, blending, freight deals). Initiates and completes negotiations and executes or recommends execution of deals (purchase, exchange, and sale in contracts) that maximize economic benefits to the company. Builds and maintains internal and external relationships with counterparties and business partners. Prepares periodic reports on market activities and supply/demand or competitive developments. Collaborates with the value chain and various members of the extended business team (Credit, Legal, Accounting, etc.) to stay abreast of trading, logistical and financial activity, meet regulatory requirements, prepare contracts, address information queries, and develop acquisition/sales strategies to achieve optimum value. Participates in the negotiation or development of commercial resolutions impacting trading desk (e.g., disputes, claims, etc.). Analyzes and anticipates market conditions to optimize economic value added from purchases, sales, and exchanges in the short-term. Manages basis commodity exposure and/or physical inventory position to maximize market structure value within operational constraints in collaboration with Refining, Scheduling, and Finance groups within assigned area. Optimizes transportation and storage asset utilization, while managing costs and maximizing economic benefit in collaboration with key stakeholders with a focus on short term. Education and Experience Trader Bachelor's degree required. Three (3) or more years of experience in Trading or Marketing including profit/loss responsibility for Product Trading, Contract Negotiation and Scheduling (rail, truck, vessel and pipe). Senior Trader Bachelor's degree required Five (5) or more years of experience in trading or marketing including profit/loss responsibility for product trading, contract negotiation and scheduling (rail, truck, vessel and pipe) Skills Accountability Commercial Awareness Communication Contract Management Customer-Focused Data Analysis Decision Making Entrepreneurship Leadership & Mentoring Marketing Strategies Negotiation Risk Management Strategic Planning Location: Houston TX Relocation: Available Estimated Travel: Up To 25% This position grade may vary depending on candidate experience. The successful candidate will be placed at a level commensurate with experience and qualifications. As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Houston, Texas Additional locations: Job Requisition ID: 00019966 Location Address: 500 Dallas St Ste 2900 Education: Bachelors (Required) Employee Group: Full time Employee Subgroup: Regular Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here. If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at ***************************************. Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at ***************************** hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role.

We are seeking a skilled and motivated Geologist to join our oil and gas team. The Geologist will play a key role in evaluating subsurface formations, identifying hydrocarbon prospects, and supporting exploration and development activities. This role requires strong analytical skills, field and subsurface interpretation expertise, and the ability to collaborate with multidisciplinary teams to maximize resource potential. Requirements ESSENTIAL DUTIES: Conduct geological and geophysical studies to identify and evaluate conventional and unconventional oil and gas prospects. Interpret seismic, well log, core, and production data to build accurate subsurface models. Generate structure maps, cross-sections, and stratigraphic interpretations to support exploration and development. Evaluate reservoir potential, identify drilling targets, and make recommendations for well placement. Support drilling operations with real-time geological analysis, including wellsite correlation and geosteering. Collaborate with reservoir engineers, drilling engineers, and land teams to optimize exploration and development strategies. Prepare technical reports, presentations, and recommendations for management and stakeholders. Stay updated on new exploration technologies, industry trends, and regulatory requirements. EDUCATION: Bachelor's or Master's degree in Geology, Geosciences, or related field. EXPERIENCE: 5+ years of experience in oil and gas exploration and/or development (unconventional or conventional). Planning and monitoring horizontal wells Proficiency with geological and geophysical software (e.g., Petrel, Kingdom, Landmark, Petra, Starsteer). Strong understanding of stratigraphy, structural geology, and petroleum systems. Experience with well log interpretation, seismic interpretation, and reservoir characterization. Strong analytical, communication, and presentation skills. Ability to work independently and as part of a multidisciplinary team. LOCATION: Killam Oil and Gas., Ltd is located in Laredo, Texas; this is an in office position based at our office in Laredo, all applicants will be required to relocate, if necessary. SKILLS: Must have the following skills and/or abilities: Experience in unconventional shale plays, carbonates, or deepwater environments. Familiarity with geosteering and real-time operations support. Knowledge of GIS applications and advanced data visualization tools. LICENSES/CERTIFICATIONS: Must have a current valid driver's license and a satisfactory driving record. PHYSICAL REQUIREMENTS: Must be able to perform the following physical activity on a frequent to constant basis: Sit for long periods of time. Lift 10-20 lbs. of files, plans, office supplies, or similar items. Constantly uses fingers and hands when dialing/answering the telephone and operating a computer or other office machinery, such as a copy machine, scanner, and computer printer. Ability to hear average or normal conversations and receive ordinary information through verbal communications in person or detect objects in and around job site over the telephone. Average, ordinary visual acuity is necessary to prepare or inspect documents; operate a computer or other office machinery; or. Walk short distances on slippery, even, and/or uneven surfaces. Stand, bend, stoop, kneel, crouch, twist, turn, or crawl. WORKING CONDITIONS: Will require frequent job site visits involve performing work in outdoor weather conditions with exposure to extreme cold, heat, and noise depending upon project site. May travel locally during the workday. OTHER REQUIREMENTS: Must be able to: Adhere to the highest standards of ethics, integrity, professionalism, and discretion. Project a courteous, professional and positive approach with clients, subcontractors, employees, and authorizing agencies while providing prompt, efficient, and accurate assistance. Follow and exchange basic instructions, information, and guidelines. Make decisions based on experience or knowledge with minimal supervision. Participate in training and development opportunities offered to maintain related software and safety knowledge. Adhere to and perform functions according to company and OSHA safety guidelines. Maintain regular, timely, and predictable attendance. Represent the company in a professional manner to callers and visitors.

is based in the Midland, TX area * Detailed Description: * Develop relationships and contact customer decision-makers to generate business for MSD * Adhere to the Company's Code of Business Conduct and Ethics * Represent the Company and our values with integrity while maintaining the highest ethical and legal standards with all customer interactions * Demonstrate financial responsibility in adherence to the Company's travel and entertainment policy * Regularly visit (drive to) customer locations to develop relationships, and contact customer decision-makers to generate business for MSD * Prepare written reports, cost benefit analysis, solution-oriented presentations, and sales and price quotations to compete for customer business * Ensure systematic delivery and resolution of customer inquiries and information gathered about customer satisfaction to the appropriate Company personnel/departments * Develop, demonstrate and deliver value cases for different levels of customer * Develop new prospects, and interact with existing customers, to increase sales, products, and/or services across all types of well servicing * Assess the potential application of Company products or services, and offer solutions that meet customer needs * Conduct intelligence gathering on current and potential customers and competitors. * Communicate and coordinate with Operations, to understand activity levels, equipment utilization, competitive advantages, growth strategy and customer satisfaction. * Work directly with operations to identify and improve upon daily operations to continually drive towards Operational Excellence * Develop positive relationships with other employees in Operations, Marketing, Product Development, and other departments as needed * Use technical knowledge of product offerings to support and build sales * Communicate customer feedback into future product developments * Represent the Company in the marketplace through various industry organizations (SPE, AADE, IADC, etc.) and other industry events * Keep well-informed on current industry trends, opportunities, products and competitive issues * Self-driven to ensure MSD is being represented every day in a manner consistent with the Company's Core Values. * Attend and participate in sales meetings, product seminars, trade shows and professional organizations as appropriate * Position MSD as a market leader within the industry * Develop strong long-lasting relationships at every level within customer's organization. * Keep accurate track of AR Invoices and ensure timely payment from customers Job Requirements: * Excellent business prospecting skills and strong negotiation skills * Strong relationship builder * Excellent communication and presentation skills * Ability to function in a high-pressure environment, and to respond well to a high level of stress * Ability to make well informed decisions within tight time constraints consistent with the Company's Core values * Ability to work weekends and/or additional hours that are needed to complete specific job tasks * Ability to travel on a regular basis Minimum Qualifications: * High School Diploma or GED * 3+ years business development or sales experience * Eligible to meet requirements to drive on Company business Preferred Qualifications: * Bachelor's Degree in Business Management, Marketing or a related field * Prior energy services sales experience * Proven Permian sales history * Directional Drilling Sales experience Additional Details: Variable work hours include regular after-hours, weekend, and holiday commitments as well as regular travel within and outside assigned region. The Sales Representative must work with an emphasis and prioritization to maintain a professional attitude when interacting with all Company and customer representatives. Must be able to work closely with others and manage customer interaction in a professional manner.

Job DescriptionPetroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

Magnolia Marine Transport has an opening for a full-time Pilot to safely operate company vessels and tows in accordance with all applicable regulations and company policies. We are a relationship-driven, family-owned company that values professionalism, leadership, and teamwork. Magnolia Marine Transport offers competitive pay, strong benefits, and maintains a small-company culture where each employee's contribution matters. Pilot Qualifications * Must hold appropriate USCG Merchant Mariner Credentials for the assigned area of operation * Must possess a valid TWIC Card, Radio License, and Radar Observer Certificate, as required * Demonstrated time and experience with Magnolia Marine sufficient to establish competence and leadership ability * Working knowledge of USCG Rules and Regulations and company policies * Ability to exercise sound judgment in dynamic and potentially hazardous operating environments Pilot Responsibilities Include the Following * Acts as second in command and is directly responsible to the Captain; represents the Captain when standing watch * Responsible, along with all crew members, for the safety of the vessel, crew, and tow, and for compliance with the Safety Management System * Navigates the vessel in full compliance with USCG regulations, company policies, and the vessel's Certificate of Inspection (COI), when applicable * Reports unsafe conditions, incidents, and nonconformities to the Captain and Port Captain, and takes appropriate action to prevent accidents * Has the authority to determine when unsafe conditions exist and may refuse a tow or navigational area deemed unsafe or presenting undue risk * Requests company assistance when necessary to ensure safe and compliant operations * While on watch, maintains responsibility for the safety and welfare of the vessel, crew, and tow; sounds alarms and summons the Captain if a dangerous situation develops * Stands watch in the pilothouse at all times, including when the vessel is tied up, except during dry-dock periods * Ensures all required logs and records are accurately completed during assigned watch * Communicates all pertinent operational information and incidents to the Captain in a timely manner Benefits Magnolia Marine Transport offers a competitive benefits package, including: * 401(k) * Health, Dental, and Life Insurance * Paid Holidays * Vacation and Sick Leave * Tuition Assistance * Profit Sharing Equal Employment Opportunity Magnolia Marine Transport is an EEO/AAP Employer. Employment offers are contingent upon successful completion of a pre-employment drug test and background check.

5 Star Electric, LLC (5 Star) is a premier full-service provider of electrical construction, maintenance, and repair services with offices in Western Kentucky and Dallas/Fort Worth, Texas. 5 Star specializes in Distribution and Transmission Power Line work, Substation, Industrial, Commercial, Streetlighting, and Fiber installations. Position Title: Groundman Our Core Values: Guided by Safety. Focused on Communities. Powered by Care. Essential Functions: Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The Groundman assists line crew or network crew members by working on the ground, handing tools and heavy materials to workers. The groundman will dig holes and pad ditches, and perform other similar work in connection with the construction and maintenance of overhead and underground power lines. Groundmen are never permitted to work on energized conductors without direct/immediate supervision at all times. A Groundman is also responsible for his/her own safety at all times and is expected to learn and follow all company guidelines and safety procedures. It is the responsibility of the groundman to report any and all accidents to the Foreman immediately and to make the Foreman aware of any known potential safety hazards that may exist. Safety should be the number one priority of any groundman and ensure the safety of his fellow crew members by following all safety guidelines Roles and Responsibilities: Passes tools to line crew or network crew members by acting as a general helper on the ground. Handles cables, conduit and other materials as directed. Glues conduits together. Assists in setting transformers. Assists line crew with setting poles by shoveling or piking; fills anchor holes. Clears undergrowth from right-of-way by using hand tools or saws. Piles debris clear path. Performs general clean-up of job sites following completion of work. Positions reels of electric cable beside trenches and lays heavy residential underground distribution (URD) cables in ditches and pads by shoveling fine sand around cable. Assists network crew top man with lowering and raising molten metals and other heavy materials to the cable splicer working below in the vault. Operates roto hammer to access vaults. Notifies customers of impending disruption of service while lines are under repair. Flags traffic to protect employees and the public from injury. May assist as directed in operating jackhammer or digging bars to break concrete or rocks. May drive 3/4-ton or 1-ton pickup truck to job site or to obtain supplies. Performs other duties as assigned. Job duties are subject to change as directed by management Success Factors: Good Mechanical and Electrical Aptitude Strong team player with the ability to adapt to diverse team members Excellent verbal and written communication skills Ability to perform heavy manual labor for extended periods, often under adverse climatic conditions. Ability to lift up to 80 lbs multiple times during a work shift Ability to climb, dig, work in tight spaces, on uneven surfaces, walking, stooping, and kneeling Ability to understand and follow specific oral and written instructions Ability to work well independently and as a part of a team with co-workers Ability to pass motor vehicle, criminal background check, and comply with drug-free workplace policy Willingness and ability to learn additional skills Experience and Education: Electricity Training Preferred One (1) year of experience in a labor-intensive environment Additional Requirements/Licenses/Certifications: Possession of, or ability to obtain, a valid State of Residence Class A CDL License is required. Candidates must pass criminal and Motor Vehicle Record (MVR) background checks and pass a pre-employment drug screen. Must complete OSHA 10hr Safety Training Program within 60 days, other combinations of education / experience may be considered. Must have ability for frequent travel on needed training requirements and potential for overtime including storm work. Physical capabilities required to safely operate a motor vehicle and equipment, in all driving conditions. Possesses sight, strength and coordination necessary to safely and effectively operate heavy and light equipment and tools. Duties entail full body exertion, strenuous lifting, carrying, pushing an pulling. Notes: The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer.

CK Associates is seeking a Senior Environmental Waste Consultant to join our Risk Assessment, Remediation, and Waste Group in our Baton Rouge office. This senior-level position offers a unique opportunity to lead impactful environmental projects, provide technical expertise, and contribute to the growth of our well-established, employee-owned consulting firm. In this role, you ll work with a talented team of Geologists, Engineers, Chemists, Toxicologists, and Senior Scientists balancing project management, fieldwork, technical advising, and client engagement. We are committed to the continued professional development of our team, and this position offers significant opportunities for career advancement and leadership. Key Responsibilities: Lead solid and hazardous waste permitting activities and ensure regulatory compliance; Manage and execute solid and hazardous waste projects in line with budget, schedule, and client expectations; Prepare and review work plans, applications, technical reports, data summaries, and data visualizations (e.g., figures, trend graphs, data tables); Coordinate directly with clients and regulatory agencies; Identify and develop new business opportunities, supporting the growth of our Risk, Remediation, and Waste Program and related service lines; Mentor and support junior staff within the Waste Program; Stay current on emerging regulatory issues impacting our clients; Manage multimedia projects; and Travel to project sites and occasionally to CK offices in Lake Charles, Shreveport, and Houston. Qualifications Master s or bachelor s degree in Environmental Science, Engineering, or similar field; 10 years working in the environmental field with experience specific to waste permitting and compliance. Consulting experience preferred. Project management experience; Proficient technical writing skills; Proficiency with MS Office programs; Proficient mathematical and computer skills; Willingness and ability to travel to project sites (including some overnight stays); Ability to work on multiple projects simultaneously and maintain successful client relationships; Must be able to satisfy all Drug & Alcohol, Health & Safety, and Security requirements including obtaining a Transportation Worker Identification Credential (TWIC) card; This position requires the use of a company vehicle. Candidate must be at least 21 years of age with a clean driving record, and able to safely operate a full-size pickup truck; and Eager to excel as an individual and in a team environment. If you're a driven environmental professional looking to make a meaningful impact while growing your career, we d love to hear from you.