Maintenance supervisor jobs in Concord, NH

Who We Are At Lindt, we are a global fast-growing consumer goods company, enchanting the world with premium chocolate. We are driven by our passion for excellence and go the extra mile ensuring that every Lindt experience is nothing short of exceptional. Our collective efforts are geared towards making a positive impact, not only in the world of premium chocolate but also in the lives of our employees, customers, and communities. Our company embraces a culture defined by the core values of Excellence, Innovation, Entrepreneurship, Responsibility, and Collaboration, fostering a dynamic and collaborative environment where these principles drive our success. Position Purpose: The individual in this position is responsible for performing preventative maintenance and electro mechanical troubleshooting and repair of production and process machinery. In addition, this person ensures minimum downtime on equipment while complying with company policies, procedures and safety regulations. Essential Job Functions & Responsibilities: Preventative Maintenance Perform preventative maintenance on all production and process machinery in accordance with the established schedule that is determined and assigned by the Maintenance Supervisor. Document necessary repairs that are required to insure safe and efficient operation of the machinery Corrective Maintenance Troubleshooting & Repair Troubleshoot or diagnose any electromechanical production and process machinery or equipment problems. Determine extent of repairs required, secure the necessary parts, and make repairs to damaged or inoperative equipment in a timely manner; record work activity including labor time and utilized parts in maintenance management software work orders. Partner with the machine operator or designated room supervisor to test machine following repair to insure proper operation. Relieve parts from inventory and assign to work order. Submit non-stock items for requisition in maintenance software. Machine Set Up React appropriately to production needs and set machine according to production specs and requirements as posted or instructed by Maintenance Supervisor in an efficient manner, minimizing downtime. Upon initial set up of the machine, run the product through the machine to test and verify that output meets production standards. Prior to releasing the machine to production, conduct a final assessment of the machine to insure safe and efficient operation. Ensure compliance to company policy, procedures and safety regulations Encourage and model effective working relations with employees, the production areas and functional support departments to ensure timely communication and effective execution. Maintain a safe work environment; communicate issues and take corrective action when safety issues arise. Execute and maintain safety procedures in order to minimize accidents and company liability. Qualifications & Requirements: Experience: Minimum 2-4 years of job related experience required Demonstrated experience working in a manufacturing environment ASE certified mechanic, diesel mechanic, aviation technician, and HVAC technician with strong trouble shooting skills preferred Skills & Knowledge: Ability to properly diagnose and repair mechanical and electromechanical equipment Demonstrates capacity and willingness to learn and perform new duties, trade skills, and more complex assignments Ability to multi task in a fast-paced manufacturing environment Flexibility to meet rotational shift changes, as required. Basic computer skills Education: High School Diploma Technical, vocational, and/or equivalent job experience Other Requirements: Regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 35 pounds, occasionally lift and/or move up to 75 pounds Ability to climb, balance, stoop, kneel, crouch and reach with arms Flexibility to meet rotational shift changes, as required Total Rewards: Compensation: Starting Hourly Rate: $28.00-$30.00 Based on Experience With employee driven increases through learning and development opportunities Eligible for salary increases after 1 year through skills and job leveling program. Shift Differential for off shifts To learn more about our benefits visit *************************************** Lindt USA's salary range reflects market rates based on our size, revenue, and location. Starting pay is determined using a wide range of factors including, but not limited to, job-related skills, knowledge, and experience as well as market conditions. A bonus and/or long-term incentive may be included as part of this compensation package. Lindt and Sprüngli is an equal opportunity employer and considers all qualified applicants for employment without regard to race, color, national origin, religion, sex, disability, age, veteran status, or any other classification protected by state, local or federal law. Applicants for this position must successfully pass a background screening and may be required to pass drug screenings as well. If you are looking to join a winning team and fast-track your career, contact us! Join us in our journey of excellence, impact, and growth #LifeAtLindt Requirements Qualifications & Requirements: Experience: Minimum 2-4 years of job related experience required Demonstrated experience working in a manufacturing environment ASE certified mechanic, diesel mechanic, aviation technician, and HVAC technician with strong trouble shooting skills preferred Skills & Knowledge: Ability to properly diagnose and repair mechanical and electromechanical equipment Demonstrates capacity and willingness to learn and perform new duties, trade skills, and more complex assignments Ability to multi task in a fast-paced manufacturing environment Flexibility to meet rotational shift changes, as required. Basic computer skills Education: High School Diploma Technical, vocational, and/or equivalent job experience Other Requirements: Regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 35 pounds, occasionally lift and/or move up to 75 pounds Ability to climb, balance, stoop, kneel, crouch and reach with arms Flexibility to meet rotational shift changes, as required Total Rewards: Compensation: Starting Hourly Rate: $28.00-$30.00 Based on Experience With employee driven increases through learning and development opportunities Eligible for salary increases after 1 year through skills and job leveling program. Shift Differential for off shifts To learn more about our benefits visit *************************************** Lindt USA's salary range reflects market rates based on our size, revenue, and location. Starting pay is determined using a wide range of factors including, but not limited to, job-related skills, knowledge, and experience as well as market conditions. A bonus and/or long-term incentive may be included as part of this compensation package. Lindt and Sprüngli is an equal opportunity employer and considers all qualified applicants for employment without regard to race, color, national origin, religion, sex, disability, age, veteran status, or any other classification protected by state, local or federal law. Applicants for this position must successfully pass a background screening and may be required to pass drug screenings as well. If you are looking to join a winning team and fast-track your career, contact us! Join us in our journey of excellence, impact, and growth #LifeAtLindt

The Equipment Maintenance Manager is responsible for ensuring maximum manufacturing equipment uptime with full ownership of all PM, repair and upkeep activities. Responsibilities include scheduling routine inspections, coordinating repairs, and identifying new strategies to improve efficiency. Our ideal candidate has experience in maintenance management, excellent problem-solving skills, and the ability to manage and lead a team effectively. A strong understanding of safety protocols, industry standards, and excellent organizational skills are crucial for this role. Duties/Responsibilities: Ensure the smooth operation of equipment, minimize downtime, and supervise maintenance staff. Developing and implementing maintenance procedures, and maintaining equipment management systems Overseeing all repairs and ensuring that work is completed safely and effectively Conducting regular inspections of equipment to identify and respond to problems in a timely manner Managing maintenance budget and ensuring cost-effectiveness Maintaining a record of maintenance work and costs Training maintenance staff on procedures and best practices Scheduling regular maintenance sessions to prevent breakdowns and malfunctions Ensuring compliance with safety and environmental regulations Collaborating with equipment manufacturers and vendors for upgrades and replacements Coordinate with external vendors and contractors for repair and maintenance services. Identify and implement strategies to improve the efficiency and effectiveness of equipment and systems. Oversee the scheduling and execution of regular maintenance and inspection. Ensure all machinery and equipment meet safety regulations and standards. Manage a team of maintenance technicians and provide them with necessary training and support. Prepare and manage the maintenance budget. Ensure availability of machinery and equipment parts. Document and maintain records of equipment maintenance and repairs. Address any issues or complaints related to the equipment. Will be required to perform other duties as requested, directed or assigned. Requirements: Proven work experience as an Equipment Maintenance Manager or similar role. Knowledge of machinery functions and specifications. Understanding of safety protocols and standards in the industry. Strong problem-solving skills. Strong leadership - Ability to manage, lead and develop a team. Strong sense of accountability Excellent communication and organizational skills. BS degree in Engineering, Industrial Management or relevant field is a plus but not required Amphenol offers a competitive salary and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship. Position requires candidate to be a U. S. person as defined in ITAR, 22 CFR 120. 15 (U. S. Citizenship or Resident Alien Status) and defined by 8 U. S. C. 1101(a) (20). Amphenol is a proud Equal Opportunity Employer as to all protected groups, including Individuals with Disabilities and Protected Veterans. For consideration for this position, please apply online to: ********************* acquiretm. com APC850

Family owned and operated, Bake'n Joy Foods, Inc. is a leading manufacturer of top-quality bakery products that began over eighty years ago in 1941. We manufacture a variety of products for professional bakers including frozen scoop batters, predeposited muffin, cornbread, loaf cakes and Boston Coffee Cakes, mixes as well as an expanding line of fully baked items such as coffee cakes, loaf cakes and more. We remain committed to providing top quality products, service, and value to our customers. **********STAFFING AGENCIES AND RECRUITING FIRMS - PLEASE DO NOT CONTACT BAKE'N JOY FOR THIS ROLE********** Maintenance and Reliability Manager North Andover, MA Classification Exempt Reports To Director of Engineering & Maintenance JD Review Date November 9, 2025 Job Summary/Objective The Maintenance and Reliability Manager is responsible for leading the maintenance and reliability strategy for a mid-sized baked and frozen food manufacturing company. This role ensures all equipment and systems operate safely, efficiently, and reliably. The manager will build and develop a skilled maintenance team, implement a robust reliability program, and drive continuous improvement initiatives that support safety, quality, and long-term business growth. This is an exciting opportunity to join a family-owned company that takes pride in producing high-quality baked and frozen products while investing in people, technology, and sustainable operations. The right candidate will be a hands-on manager who thrives in a collaborative environment and is passionate about developing teams and systems that perform at their best. Essential Functions Reliability & Maintenance Program Management Develop, implement, and maintain a comprehensive Reliability-Centered Maintenance (RCM) program. Lead Root Cause Analysis (RCA) and Failure Mode and Effects Analysis (FMEA) to reduce downtime and improve equipment performance. Oversee preventive and predictive maintenance strategies, ensuring optimal balance between reliability, cost, and efficiency. Drive continuous improvement initiatives to reduce unplanned downtime and increase Overall Equipment Effectiveness (OEE). Partner with Operations and Quality to ensure equipment reliability supports food safety, product consistency, and throughput goals. Champion Total Productive Maintenance (TPM) principles to engage operators in basic maintenance and equipment care. Develop and track KPIs to monitor performance. Systems & Technology Manage Bake'n Joy's Computerized Maintenance Management System (CMMS), ensuring accurate asset data, PM scheduling, work order completion, and reporting. Leverage CMMS data to identify trends, optimize maintenance schedules, and improve reliability KPIs. Collaborate with engineering and automation teams to support controls, PLCs, and other automation systems. Support implementation of new technology to advance maintenance efficiency and reliability practices. Support engineering on equipment upgrades, controls integration, and capital project planning. Parts Inventory & Cost Control Manage spare parts inventory and vendor relationships to ensure availability of critical components while minimizing carrying costs. Maintain a well-organized spare parts inventory. Develop and manage the annual maintenance budget, ensuring cost efficiency without compromising reliability or food safety. Identify cost-saving opportunities through energy efficiency, improved reliability, and optimized maintenance practices. Leadership & Team Development Recruit, train, mentor, and retain a skilled maintenance and reliability team, fostering a culture of safety, accountability, and continuous improvement. Develop individual training plans to build technical expertise in areas such as automation, PLCs, controls, and preventive maintenance. Champion associate engagement and ensure effective communication and alignment across shifts and departments. Cultivate a culture of collaboration and pride, where team members are engaged in problem-solving and continuous improvement. Competencies Strong proficiency with CMMS systems (e.g., eMaint, Fiix, SAP, Infor, or similar). Demonstrated experience with automation systems, PLCs, and controls troubleshooting. Knowledge of reliability methodologies (RCM, TPM, RCA, FMEA). Solid understanding of mechanical, electrical, and utilities systems standard to food manufacturing. Proficient in Microsoft Office Suite and data analysis/reporting tools. Excellent management, communication, and problem-solving abilities. Strategic thinker with hands-on execution ability. Strong organizational and project management skills. Collaborative mindset with the ability to influence cross-functional teams. Management Responsibilities Direct management of the maintenance supervisory team, maintenance planner, and buyer. Oversight of all Maintenance associates. Work Environment Use of personal protective equipment as required. Must follow all GMP, food safety, and safety regulations. Primarily a manufacturing plant environment with exposure to noise, temperature variations, and machinery. Production environment includes hot, cold, humid, and refrigerated areas, exposure to bakery ovens, spiral freezers, and packaging lines. Travel Required vehicular travel between production facilities. Required Education & Experience Bachelor's degree in Engineering, Maintenance Management, or related technical field, or equivalent experience. 7+ years of progressive maintenance experience in a manufacturing environment; 3+ years in a management role. Food or beverage manufacturing experience is strongly preferred. Preferred Education & Experience Reliability certifications (CRE, CMRP, ARP, CRL, etc.) Bilingual English and Spanish Physical Demands Ability to lift up to 50 lbs. Prolonged standing and walking on concrete floors. Position Type Full-Time Work Hours Typical work hours are Monday to Friday from 8 AM to 5 PM. Availability outside of typical work hours for on-call response to critical equipment failures. Requires flexibility for occasional off-shift or weekend support for major repairs or shutdowns. Compensation The typical starting salary range for this position is $110,000-$150,000 a year. Several factors, including skills, experience, education, certifications, and the location of the job will determine the actual pay offered. The salary range for this role reflects the competitive labor market value for associates in these positions. This position may also be eligible to receive a variable annual bonus based on company, team, and/or individual performance results in accordance with company policy. Bake'n Joy offers its full-time associates a comprehensive Total Rewards package, which includes affordable, quality healthcare for our associates and their families, life insurance and disability benefits to provide security, and retirement benefits to help plan for the financial future. Bake'n Joy is committed to fostering an environment where associates from all backgrounds can build long and meaningful careers. Through strong relationships, comprehensive benefits, and continuous learning opportunities, we seek to create an environment where associates can succeed, both professionally and personally. Equal Employment Opportunity Policy Bake'n Joy provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description MAINTENANCE MANAGER Our client is seeking a Maintenance Manager for one of their flagship apartment communities. The ideal candidate is a proven leader, must be skilled in all areas of general maintenance and must be able to perform physical maintenance operations of the property. YOUR ROLE Lead and manage the onsite maintenance team to a world-class standard. Conduct routine inspection and preventive maintenance of all building-related systems Coordinate response to resident maintenance requests in a timely and efficient manner Reliably handle emergency situations and quickly communicate issues to your supervisor and fellow team members Develop and manage an on-call schedule with neighboring sites Effectively manage the apartment turnover process Oversee selection and management of all maintenance-related vendors Potential multi-site management Manage capital projects onsite as needed including the bid process and project/construction management Assist with the creation of the property budget and ensure cost effectiveness across all maintenance-related areas YOUR VALUE Dedication to the Residents - always work to resolve their issues and exceed their expectations, doing so in a timely manner with open communication Dedication to the Vision - always represent the high standards set for ourselves and each other Dedication to Your Team - always be willing to roll up your sleeves and get the job done -no job is “below your pay grade” YOUR SKILLS 3+ years of experience in Residential Property Management (preferably as a Manager) Skilled in all areas of maintenance, turnover, and building systems Willingness to jump in and learn new tasks and systems Ability to work independently Desire to take initiative and solve problems Excellent communication skills, both written and verbal THE PERKS! Market Competitive salary, on-call and overtime pay, bonuses and performance-based incentives. Comprehensive health, dental, and vision insurance plans. Professional development opportunities. Generous vacation and leave policies. Potential Onsite Housing (allowance)

Join Crane Currency as an Equipment Maintenance Manager in Nashua, NH and be a part of a team that values continuous improvement and challenging the status quo. Who we are: Crane Currency is a premier industrial technology company and a pioneer in currency manufacturing and advanced micro-optics technology for securing physical products. Yes, chances are you have our product in your wallet right now! Our sophisticated equipment and software leverage proprietary core capabilities with detection and sensing technologies. Around the world, our customers trust us to anticipate their needs with innovative, reliable, and high-quality currency & authentication solutions and services-just as they have for generations. Learn more at ********************* How you will make an impact: This position serves as a key driver of positive change-bringing the expertise needed to lead our maintenance team in ensuring the reliability of manufacturing process equipment, facility infrastructure, and general equipment. The goal is to help meet and improve up-time standards, manage budgets effectively, and support safety initiatives as outlined by the management team, all while implementing and sustaining strong Preventive Maintenance procedures and practices. Success in this role depends on building and maintaining excellent working relationships across maintenance, engineering, and manufacturing teams to keep operations running smoothly and efficiently. * Actively supervise the maintenance team in performing preventive, scheduled and unscheduled maintenance of plant equipment; actively working "hands on" to directly support the maintenance teams when required. * Work with operations, engineering, suppliers and management to resolve maintenance related problems promptly and effectively. * Maintain manual and electronic records of preventive maintenance, equipment checks and service records. * Recognize and implement improvements in the workflow that will provide better results in reliability and longevity of equipment. * Ensure safe working conditions by identifying risks and openly communicating with the team. * Ensure PPE and other safety requirements are closely adhered to. * Generate reports, data, graphs and charts to optimize maintenance performance and communicate decisions. * Effectively communicate and cooperate with others outside department boundaries to influence success. Knowledge and expertise that matter most for this role: Required: * Bachelor's Degree in an engineering field with 4 years of supervisory experience required. * Experience managing a budget. * Demonstrated ability in influencing and leading teams including coaching, identifying training needs, and working with management to address employee performance issues. * Excellent troubleshooting, fault analysis and problem-solving skills. * Must possess solid computer skills; Windows based programs: Excel, Word, PowerPoint and Outlook at a minimum and have previous CMMS experience CMMS experience in Smartware Bigfoot is a plus. * Facilities maintenance such as fire protection, HVAC, etc. * Ability to read and interpret technical manuals, blueprint drawings, schematics and diagrams of electrical and mechanical components/systems Incumbent must be a United States citizen, demonstrating suitability for employment in a position of Public Trust consistent with our US Government contract requirements. Preferred: * Knowledge of mechanical properties of paper printing machinery and converting equipment. * Electrical and mechanical protective devices. How we will care for you: We offer top-notch benefits, including medical, dental, vision, company bonus plan, 401(K) match and more. Discover more about our benefits here https://*********************/careers/benefits/ What drives our team: We are a passionate team of 1,200 creators and problem solvers, united by our purpose, we give people confidence every day in moments that matter. This comes to life through our Shared Values: * People Matter * Do the Right Thing * Trusted Partner * Innovate for Growth * Always Improving Learn more about our values and culture: https://*********************/careers/life-at-crane-currency/ You can also check us out at: ********************************************************************* Where we are: Your role is in Nashua, New Hampshire, a 40-mile drive from the vibrant heart of Boston. Check out what makes Nashua a great place to live and work here: https://*********************/media/xbsnwhir/nashua-nh_site-location-packet_2024.pdf * ---- Crane Currency is a drug free workplace. SUITABILITY AND BACKGROUND INVESTIGATION REQUIREMENTS: The final offer of employment will be subject to the applicant's successful completion of a background investigation and favorable adjudication. Failure to successfully meet these requirements will be grounds for disqualification in the hiring process. The background investigation process conducted by Crane and our U.S. Government Agency customers is very thorough. Therefore, it is imperative that applicants exercise candor and honesty when answering background questionnaires, especially as it relates to arrest, employment, education, finances, illegal drug use, and/or other criminal history. Falsification discovered in security documents or during the background investigation process may result in an immediate negative suitability determination. Crane NXT is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, disability, military status, or national origin or any other characteristic protected under applicable federal, state, or local law. #CCY #ONSITE #LI-JW1 #cranecurrency #opentowork #jobsearch #hireme #jobhunt #jobseeker #hiring #recruitment #jobsearching #remotework #employment #careers #nowhiring #Newhampshire #MaintenanceManagement #FacilityManagerJobs #MaintenanceCareers #OperationsLeadership #ManufacturingMaintenance #PreventiveMaintenance #ReliabilityEngineering #MaintenanceSupervisor #IndustrialMaintenance #JoinOurTeam

Job Description The Equipment Maintenance Manager is responsible for ensuring maximum manufacturing equipment uptime with full ownership of all PM, repair and upkeep activities. Responsibilities include scheduling routine inspections, coordinating repairs, and identifying new strategies to improve efficiency. Our ideal candidate has experience in maintenance management, excellent problem-solving skills, and the ability to manage and lead a team effectively. A strong understanding of safety protocols, industry standards, and excellent organizational skills are crucial for this role. Duties/Responsibilities: Ensure the smooth operation of equipment, minimize downtime, and supervise maintenance staff. Developing and implementing maintenance procedures, and maintaining equipment management systems Overseeing all repairs and ensuring that work is completed safely and effectively Conducting regular inspections of equipment to identify and respond to problems in a timely manner Managing maintenance budget and ensuring cost-effectiveness Maintaining a record of maintenance work and costs Training maintenance staff on procedures and best practices Scheduling regular maintenance sessions to prevent breakdowns and malfunctions Ensuring compliance with safety and environmental regulations Collaborating with equipment manufacturers and vendors for upgrades and replacements Coordinate with external vendors and contractors for repair and maintenance services. Identify and implement strategies to improve the efficiency and effectiveness of equipment and systems. Oversee the scheduling and execution of regular maintenance and inspection. Ensure all machinery and equipment meet safety regulations and standards. Manage a team of maintenance technicians and provide them with necessary training and support. Prepare and manage the maintenance budget. Ensure availability of machinery and equipment parts. Document and maintain records of equipment maintenance and repairs. Address any issues or complaints related to the equipment. Will be required to perform other duties as requested, directed or assigned. Requirements: Proven work experience as an Equipment Maintenance Manager or similar role. Knowledge of machinery functions and specifications. Understanding of safety protocols and standards in the industry. Strong problem-solving skills. Strong leadership - Ability to manage, lead and develop a team. Strong sense of accountability Excellent communication and organizational skills. BS degree in Engineering, Industrial Management or relevant field is a plus but not required Amphenol offers a competitive salary and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship. Position requires candidate to be a U.S. person as defined in ITAR, 22 CFR 120.15 (U.S. Citizenship or Resident Alien Status) and defined by 8 U.S.C. 1101(a) (20). Amphenol is a proud Equal Opportunity Employer as to all protected groups, including Individuals with Disabilities and Protected Veterans. For consideration for this position, please apply online to: ********************************** APC850

The Affordable Maintenance Manager is responsible for attending to the physical upkeep of the property and ensuring that resident work requests are serviced both timely and effectively, within and in accordance with the standards expected at a Corcoran-managed property and the parameters of the approved annual operating budget. Location: 525 Amherst Street, Nashua NH 03063 Schedule: Monday through Friday, 7:30 am - 4:00 pm. On-call rotation required. Eligible for a $2,500.00 sign-on bonus! ESSENTIAL DUTIES: • Ensure all equipment and supplies needed for maintenance are on hand and that the most competitive price is sought. Consistently obtain pre-approval from the PD/PM for all unbudgeted purchases in excess of $500. • Schedule and supervise maintenance/janitorial/ grounds staff to maximize efficiency and provide for both routine and preventive maintenance in a timely manner. • Participate in the hiring interview process for staff and make recommendations on employment matters as requested. • Ensure all units are inspected on an annual basis 120 days prior to lease renewal. • Inspect all units upon vacating and submit report to rental manager for inclusion in deposit settlement. • Coordinate with Property Manager/Rental Manager/Assistant Manager to ensure that units are correctly accounted for in the system (vacant vs. occupied) and that units are ready to red dot on a timely basis. • Ensure emergency response is provided on weekends, evenings and holidays and participate in the coverage schedule. Notify the answering service of the on-call schedule. • Maintain adequate records of preventive maintenance work, work orders, apartment refurbishing, annual inspections, purchase orders and overtime reports; submit reports on a timely basis to the PD/PM. • Ensure all equipment is maintained and serviced pursuant to the recommendations of the manufacturer and the schedule set by the Corcoran Management Company. • Ensure that hall, stairwell, outside and common area lights are checked regularly and any lighting that needs to be replaced is completed on a timely basis. • Constantly be aware of potential safety problems and make necessary corrections if possible or bring to the attention of the PD/PM. Important areas of concern are walkways, stair treads, lighting and locks. Always be aware of uneven surfaces or worn materials. • Responsible for key control system in accordance with CMC policy. • Keep accurate records and files on contracts and suppliers, their services and products, as well as all utility shut-offs, both for the buildings and individual units. • Ensure maintenance staff are in uniform while on the job and that all work is done in a safe and professional manner, including using appropriate safety gear at all times. • Coordinate the snow removal effort; ensure all efforts are made to open up the property in a timely manner and that hazardous conditions do not exist. Maintain snow removal logs. • Ensure that grounds are properly maintained and mowed; coordinate the annual landscape program. • Maintain paperwork and vendor records; consistently utilize the invoice system technology to process invoices. • Follow company policies and procedures at all times, including wearing appropriate company uniform and following property safety techniques and protocols. • Complete required trainings as assigned. • Attend required meetings. REQUIRED EDUCATION/EXPERIENCE: High School Diploma or equivalent combination of education/experience. Minimum of 3 years' trade experience or general building maintenance. Working knowledge of the equipment used in this job, including electrical and mechanical systems. Ability to read, write and communicate in English. Ability to follow detailed instructions. Ability to pass background screening, Drug and Alcohol screening and Physical and Agility tests at time of hire and throughout employment. Monday through Friday, 8:30am-5pm. On-call rotation required.

The Arbors of Bedford are seeking an experienced and skilled Maintenance Director to join our growing team of professionals at Benchmark Senior Living. Monday-Friday schedule with Manager on Duty rotation. Salary: $82,500 The Maintenance Director is primarily focused on maintaining responsibility for all maintenance and housekeeping functions within an assisted living facility. This person is expected to have a hands-on role in the overall operations of this facility as well as dealing with administrative functions. As the Director, you will be responsible for using your maintenance skills to perform various hands-on tasks including electrical, carpentry, HVAC, and general maintenance. In addition, the Director of Facilities Operations will emphasize interacting with the staff and residents and overseeing staff, payroll, operational expenses and supply and capital expenditures Responsibilities Communication and coordination of people and tasks to accomplish repairs and alterations to buildings and equipment systems Providing technical support, product information, research, and quality assurance guidance establishing and monitoring a preventative maintenance program that will promote a sense of well-being and esthetic appeal for residents and staff Maintaining OSHA (Occupational Safety and Health Administration) and fire code compliance Other maintenance functions as required The Director of Plant Operations must be an experienced maintenance professional with a strong skillset Candidates must have previous maintenance and housekeeping management experience in a long-term care or assisted living facility Must have a strong working knowledge of applicable building systems, including mechanical/electrical/plumbing with a strong emphasis on HVAC Requirements Possesses an understanding of all applicable life safety regulations Demonstrated ability to run a successful maintenance and housekeeping department Experience in facilities management capacity Possesses good communication skills Previous supervisory experience required Possesses diagnostic abilities and skills in completing details Understands the practices surrounding proper handling of biohazardous waste As a community leader at Benchmark, you will have access to a variety of benefits including, but not limited to, the following: 8 holidays & 3 floating holidays Vacation and Health & Wellness Paid Time Off Discounted Meal Program Associate Referral Bonus Program, up to $1,500 Physical & Mental Health Wellness Programs Medical, Vision & Dental Benefits; no enrollment waiting period 401k Retirement Plan with Company Match Company-provided Life Insurance & Long-Term Disability

Job Description The Market Maintenance Manager is responsible for attending to the physical upkeep of the property and ensuring that resident work requests are serviced both timely and effectively, within and in accordance with the standards expected at a Corcoran-managed property and the parameters of the approved annual operating budget. Location: Washington Mills, Lawrence, MA. Schedule: Monday through Friday, 8:00 am - 4:30 pm. On-call rotation required. Eligible for a $2,500.00 sign-on bonus! ESSENTIAL DUTIES: • Ensure all equipment and supplies needed for maintenance are on hand and that the most competitive price is sought. Consistently obtain pre-approval from the PD/PM for all unbudgeted purchases in excess of $500. • Schedule and supervise maintenance/janitorial/ grounds staff to maximize efficiency and provide for both routine and preventive maintenance in a timely manner. • Participate in the hiring interview process for staff and make recommendations on employment matters as requested. • Ensure all units are inspected on an annual basis 120 days prior to lease renewal. • Inspect all units upon vacating and submit report to rental manager for inclusion in deposit settlement. • Coordinate with Property Manager/Rental Manager/Assistant Manager to ensure that units are correctly accounted for in the system (vacant vs. occupied) and that units are ready to red dot on a timely basis. • Ensure emergency response is provided on weekends, evenings and holidays and participate in the coverage schedule. Notify the answering service of the on-call schedule. • Maintain adequate records of preventive maintenance work, work orders, apartment refurbishing, annual inspections, purchase orders and overtime reports; submit reports on a timely basis to the PD/PM. • Ensure all equipment is maintained and serviced pursuant to the recommendations of the manufacturer and the schedule set by the Corcoran Management Company. • Ensure that hall, stairwell, outside and common area lights are checked regularly and any lighting that needs to be replaced is completed on a timely basis. • Constantly be aware of potential safety problems and make necessary corrections if possible or bring to the attention of the PD/PM. Important areas of concern are walkways, stair treads, lighting and locks. Always be aware of uneven surfaces or worn materials. • Responsible for key control system in accordance with CMC policy. • Keep accurate records and files on contracts and suppliers, their services and products, as well as all utility shut-offs, both for the buildings and individual units. • Ensure maintenance staff are in uniform while on the job and that all work is done in a safe and professional manner, including using appropriate safety gear at all times. • Coordinate the snow removal effort; ensure all efforts are made to open up the property in a timely manner and that hazardous conditions do not exist. Maintain snow removal logs. • Ensure that grounds are properly maintained and mowed; coordinate the annual landscape program. • Maintain paperwork and vendor records; consistently utilize the invoice system technology to process invoices. REQUIRED EDUCATION/EXPERIENCE: High School Diploma or equivalent combination of education/experience. Minimum of 3 years' trade experience or general building maintenance. Working knowledge of the equipment used in this job, including electrical and mechanical systems. Ability to read, write and communicate in English. Ability to follow detailed instructions. Ability to pass background screening, Drug screening, Physical, and Agility tests at time of hire and throughout employment. Monday through Friday 8:00 am - 4:30 pm. On-call rotation required.

The Jet Manager works under the administrative direction of the Director of Maintenance, with minimal supervision. Responsible for business operations and driving continuous improvement efforts to grow the business unit. Complete focus on safety, quality, productivity, efficiency, and profitability of departmental and organizational operations for a business through the provision of effective methods and strategies. This position is responsible for supervision of aircraft maintenance, ground support operations and associated hanger area facilities, shops and allied equipment. Also responsible for security and protection of aircraft. As the Jet Manager, you possess a well -informed, innate and timely knowledge of the Market. You will play the key role in general aviation communicating between our clients and the company and will be responsible for identifying and building effective networks with existing and potential clients. Complete understanding of pricing and profitability for the achievement of customer satisfaction, revenue generation, and long -term account goals in line with company vision and values. Requirements Key Responsibilities As the Manager of Corporate Jet Maintenance Operations, you will play a pivotal role in driving the Company's growth by effectively managing and promoting our strategic agenda. Your responsibilities will include: Strategic Leadership: Develop and communicate the company's goals and mission to the Jet Maintenance Department Team, fostering alignment with overall organizational objectives. Financial Management: Set and manage the annual Jet Maintenance Department P&L Budget, conducting regular audits and holding routine budget/actual review meetings. Operational Oversight: Run daily meetings to assess maintenance job workload and manpower needs, allocating tasks according to capacities and daily workload. Quality Control and Compliance: Oversee the Jet Maintenance Department's Quality Control (QC) guidelines, ensuring adherence to performance benchmarks. Facility and Staff Management: Ensure the maintenance facility and operations comply with industry -standard Repair Station Manual specifications. Identify staffing qualifications and hiring needs, assisting on the production floor as necessary. Skills and Abilities Minimum of five years of experience in aircraft maintenance with one or more years in a supervisory/management role. High degree of computer literacy including experience with MS Office Suite. Extensive experience in maintaining and working with business jets and business jet Part 135 and Part 91 operators and management companies such as NetJets, FlexJet, FlyExclusive, EJM, JAFS, and their respective maintenance controls. Thorough understanding of FARs and the ability to work directly and in close collaboration with the FAA. Experience with Corridor maintenance tracking and billing software. Experience with aircraft maintenance tracking software suites such as CAMP/Cescom, Traxxall, and ATP. Ability to assist with mechanical duties on the maintenance production floor. Ability to lift and carry 50 lbs. Advanced knowledge of and direct hands -on experience with industry -standard aviation maintenance manuals, tools, and associated equipment. Proven ability to attract, supervise, train, and motivate employees. The ability to work with diverse personalities and instil a culture of inclusiveness and teamwork. The ability to work directly with aircraft owner customers or their representatives. Ability to establish credibility and be decisive; make decisions that recognize and support the organization's preferences and priorities. Minimum Requirements: High School Diploma or equivalent required 5 -10 years of experience in corporate aviation maintenance is desired Basic leadership skills Certifications & Licenses: FAA Airframe and Power Plant Certification FAA Inspection Authorization Certification desired Standard Aviation Tool Kit required Fluent verbal and written English skills are required. Proficient in the use of computers as well as MS Office products Candidates must be able to pass a pre -employment drug test and background check. Criminal Background Check & Compliant to FAA Drug and Alcohol screening checks are mandatory Benefits Benefits for Full -Time employees: 8 paid holidays Anthem medical (includes vision) HSA 401k after 90 days of employment; up to 3% company match $15,000 company paid life insurance Company paid short -term disability coverage 80 hours paid vacation, accrued weekly at 1.53 hours per week Up to 56 hours of sick time. One (1) hour of sick time to be accrued every thirty (30) hours worked

Join our team as a Maintenance Manager and take charge of maintaining and optimizing our production equipment, utilities, and facilities. Reporting to the General Manager, you'll lead a skilled team, drive cost-saving initiatives, and champion continuous improvement to align with our company's vision and values. Key responsibilities include overseeing Preventative Maintenance, managing utilities like HVAC, refrigeration, and compressed air, and ensuring compliance with safety and environmental regulations. You'll also contribute engineering expertise to capital planning and identify opportunities for innovation and process improvements. Leveraging your leadership skills, you'll foster a safe, secure, and efficient workplace while maintaining excellent internal and external customer service What to expect on the job: Reporting to the General Manager, the Maintenance Manager is responsible for all aspects of the maintenance and repair of all production equipment, utilities, buildings and grounds in the most efficient and cost-effective way possible. Lead the effort in the maintenance department, to identify potential cost savings through process improvements and methods of reducing energy consumption. Lead the continuous improvement and Preventative Maintenance effort in the maintenance department while demonstrating commitment to the Company's vision and values. Deliver cost effective repair & maintenance services to all internal and external customers through a staff of salary and hourly personnel. In collaboration with plant management, operate the Facility and Utilities in such a way as to provide reliable Fuel, Power, Water, Compressed Air, Refrigeration, HVAC, and Sewer services for all departments. Provide engineering insight and expertise in developing and implementing the Capital Plan. Review equipment and systems, identify bottlenecks and solutions, opportunity for equipment innovation, new installations, or modifications. Partner internally to continuously improve quality and productivity. Utilize Computerized Maintenance Management System (MainSaver) to maintain proper Preventive Maintenance on equipment, accurate equipment maintenance histories (cost and task), improved planning & scheduling functions, and improved inventory control; all leading to improved equipment reliability. Lead by example in the areas of employee Safety, Food Safety, Food Security, and Plant Security activities. Assist in compliance activities for all Local, State, and Federal regulatory agencies governing safety and environmental issues. Work closely with the Company's property and risk insurers to maximize protection while minimizing risk exposure. Must haves Bachelor of Science degree in Mechanical or Electrical Engineering, or related discipline. 10 years + experience managing in a maintenance and engineering related capacity; preferably in the food processing industry. Strong leadership skills, ability to rationalize challenges, identify solutions while engaging the broader team Exceptional problem-solving skills, ability to address short- and long-term issues in a planful manner Excellent communication skills, demonstrates transparency in actions and decision-making Subject Matter expert in Best Maintenance Practices for food processing equipment and facilities. Knowledge of related Engineering principals, including but not limited to: Fluid Power (Pneumatics & Hydraulics), Industrial Electric Power, Electronics & Controls, HVAC, Refrigeration Theory & System Operation, Building Construction & Design, and Plant Layout & Workflow. Familiarity with public utility services & contracts, including Electric, Natural Gas, Water, Wastewater Treatment & Wastewater Discharge. Experienced in the use of Computerized Maintenance Management Systems. Knowledgeable in Food safety requirements and procedures. Knowledgeable of OSHA rules and Environmental regulations. What's in it for you? Join High Liner Foods for a career where you shape your path, backed by great benefits and a culture of diversity, innovation, and sustainability. Immerse yourself in opportunities to make a real impact and grow with us in our mission to nourish lives. Start your adventure where endless possibilities to thrive together await. Competitive Salary Heath, dental & vision coverage Pay for performance incentives Employee & Family assistance programs Wellness Programs Retirement Planning Supplemental Parental Leaves Disability Support Volunteer hours Learning and mentorship opportunities Safety focused work environment To learn more please visit our career/LinkedIn/Indeed page Current employees please note: this position is referral bonus eligible! See our policy for more details. #HLSJ

Job Title: Maintenance Supervisor Department: Molding Maintenance Schedule: Monday - Friday 7:15 AM-3:45 PM Facility location: Charlestown, NH Maintenance supervisor should display strong problem solving and decision-making skills with a solid understanding of mechanical maintenance, repairs, refurbishments, cleaning, Equipment maintenance procedures and have extensive knowledge of health and safety regulations and practices. Duties & Responsibilities * Prepare weekly maintenance schedules and allocate work as per workload. * Employ, supervise and train employees. * Coordinate daily cleaning and maintenance activities. * Oversee all repairs and ensure that work is completed on time. * Maintain all inventory and equipment and ensure proper storage. * Comply with all health and safety regulations and practices on site. * Assist with annual CapEx Requests * Coordinate project management groups * Collaborate with manufacturing support teams to ensure adequate production support

Be a part of the best team in Property Management! Vesta Management is seeking to hire an affordable housing experienced, highly skilled, results driven Maintenance Superintendent to join our team at Whitman Woods in Tyngsboro, MA and Kensington Woods in Bedford, NH . What we Offer: At Vesta, we take pride in hiring the best talent in Property Management. We work hard and we have fun doing so. In addition to our generous benefits package, we offer service awards, performance bonuses, team member appreciation events and opportunities for growth. Our benefits include: Medical, dental & vision insurance Company matched 401(K) Paid time off- Vacation, sick, floating holidays 12 additional paid holidays Tuition Reimbursement PetPlan Pet Insurance Employee Assistance Program Long & Short-Term Disability Insurance AND MORE The Maintenance Superintendent is fully accountable for oversight of all day-to-day physical operations, ensuring enhanced value of the property while meeting the established standards for safety, appearance and operation within the budgeted financial goals. Managing the inventory of “ready” apartments to support the property's marketing and leasing efforts, scheduling and supervising staff and contractors, and inspecting completed make ready apartments for move-in. Emergency on-call, nights, and weekends may be required. May be required to drive a company vehicle. Responsible for leading a team of Maintenance professionals alongside the Property Manager. Responsible for maintaining the physical appearance, condition, cleanliness and curb appeal of the property. Assist with and attend resident retention initiatives (i.e., resident functions, promotions, monthly newsletters, etc.) and property-issued communications/notices (i.e., bad weather, emergency, etc.). Preserves and respects resident, applicant, employee and company confidentiality. Report for on-call duties to provide 24 hour/7day per week emergency maintenance service. Lead maintenance staff and workflow processes; delegating maintenance tasks and work orders. Responsible for physical plant oversight, reporting regularly to the Property Manager, to ensure successful day to day property operations. Report directly to the Property Manager, and responsible for inspecting and identifying any physical property/maintenance needs and making recommendations to the Property Manager and Physical Plant Coordinator/Area Maintenance Supervisor if applicable. Document capital improvement and/or contracted needs and develop scopes of work to be completed, solicit competitive bids and provide bid package to Property Manager for selection. Oversee and communicate regularly with vendors on site throughout the project or seasonal contract. Oversee, order, and maintain inventory levels of parts and supplies. Ensure that maintenance shop and current supplies are kept accessible and organized. Maintain Capital Inventory Control Log. Ongoing Work Orders/Projects and Preventive Maintenance Consistently maintain the overall attractiveness of the property, taking initiative as needed to keep the property looking professional and appealing to current and potential residents, owners, investors, and lenders. Regularly conduct inspections of and ensure that apartments, building systems, common areas, and grounds meet Vesta quality standards and expectations, by correcting any deficiencies. Responsible for assigning, handling, completing, and documenting service requests/work orders, ensuring that our residents' maintenance needs are met properly, quickly, thoroughly, and professionally. Maintenance and repair may include plumbing, HVAC, carpentry, appliances, carpeting, drywall, worn or defective parts, grounds, and electrical systems. May be responsible for pool maintenance, depending on property needs. Assists with moving appliances, abandoned furniture and unloading and storing supplies. Ensure unsafe conditions are corrected immediately, and practice “safety first”. Communicate, maintain accurate records, scheduling inspections, preventative maintenance, work orders/service requests (received and completed), apartment make-ready status, and assigned work-in progress. Maintain Property Inspection Control Log, Winter Weather Log, and Interior/Exterior Light Log. Make Ready Communicate, prepare, and schedule apartments for occupancy within three to five days of vacancy, to maximize occupancy. Trash out and clean out of food, furniture, appliances and other debris within assigned vacant unit. Prep assigned unit for painting and flooring. Timely and thorough completion of assigned items on make ready punch list, including, but not limited to; cleaning, painting, flooring, caulking, wall prep, removal and cleaning/replacement of receptacle and switch plate covers and light fixture bulbs, and holes in walls. While completing make ready punch list, inspect and report any additional maintenance needs including repairs or replacements not initially noted. Complete any additional tasks that are within manageable skill set. After final maintenance, painting, and floor work, the Maintenance Superintendent may be responsible for the last “sparkle”/touch prior to final move in ready inspection. Ensure ready apartments are inspected daily, communicate and input any new maintenance needs, and inform leasing of ready unit status for prospect showings. Other duties as assigned by management. Knowledge, Skills and Abilities: Excellent interpersonal skills; strong verbal communication skills Able to work independently; self-motivated, takes initiative Able to work well under pressure/emergency/time sensitive situations Able to multitask and prioritize efficiently Accepts responsibility and accountability Honest and trustworthy; displays integrity Professional, in appearance and action Shows adaptability Able to troubleshoot problems for creative solutions Organized and detailed Interested? APPLY NOW!!! Requirements Required Education and Experience: 5 plus years of related experience. Apartment community experience required. Drywall, lock change, and light electrical, carpentry, flooring, and plumbing experience required. HVAC Type I and Type II required. Knowledge of 3rd party government agency inspection protocol, i.e., REAC, State Finance Agency, etc. Experience leading a team required. Additional Eligibility Qualifications: Multilingual a plus. Must possess your own hand and power tools. Valid Driver's License and clean driving record required. Successful completion of a background check and drug screening required. Vesta is an Equal Opportunity/Affirmative Action Employer. Vesta has an ongoing commitment to a diverse workplace free of discrimination and harassment. Vesta recruits, hires, trains, and promotes individuals in all job titles without regard to any protected characteristic, including but not limited to race, color, creed, religion, ancestry, sexual orientation, genetic information, national origin, age, sex, physical or mental disability, being a disabled veteran, veteran of the Vietnam era, or other eligible veteran, or any other protected category under any state or Federal laws. At Vesta, we are committed to a fair and equitable workplace. Salary Description $28.85-$32.25/hr.

Job Advertisement Plan coordinate and implement variety of facility maintenance (including preventive) custodial maintenance and repair tasks to facilities and equipment managing and assisting other Facilities Division staff and contractors to achieve operating and Comprehensive Master Plan objectives; supervise building mechanics and custodial staff; and oversee activities of outside facilities contractors. Full Time Job Description: Maintenance Manager - Facilities.pdf

General Description : The Grantham Maintenance Supervisor is responsible for effective maintenance, preventative maintenance planning and scheduling, delegating, coordinating and decision making to attain desirable production results, as well as the oversite of all maintenance items of the Grantham NH Sawmill & Yard. Other responsibilities include sustaining cost-effective ways to control labor and supply cost surrounding maintenance items. Additionally, maintaining an efficient system for completing PM work orders in a timely manner, maintaining professionalism, motivating team members- to increase productivity and performance- and monitoring maintenance procedures to ensure compliance and efficiency in all areas are meeting or exceeding company standards. Responsibilities: Communicating with the purchaser and Mill Manager to further support cost effective ways to manage purchasing and inventory control throughout the facilities Initiate purchasing of all consumable parts (with PM Parts Purchaser) Working with the PM Parts Purchaser to build a Preventive Maintenance program for each area that is easily maintained Develop and follow the PM program as outlined by the Mill Manager Assign and perform Electrical and mechanical PMs (Coordinated with necessary vendors with the assistance of the PM Parts Purchaser) Complete/Close and document PM work orders as required Maintaining Sawmill Machinery Waste Systems and dust collection systems All outside yard equipment Compressor PM and Service Dry Kilns - Springfield Location Building Needs Enforce LOTO and Hot Work policies and departmental training Maintain a comprehensive knowledge of procedural manuals, blueprints, and diagrams including mechanical, electrical, pneumatic, and hydraulic Troubleshoot up to 480 Volt equipment, including wiring 3 Phase motors and VFDs Safely and effectively troubleshoot and repair electrical breakdowns Troubleshoot up to 480 Volt equipment, including wiring 3 Phase motors and VFDs Termination of wiring and associated components Interpreting and improving automated system's performance parameters, at macro/micro level Installation of Electrical, Mechanical and Electronic devices Repair/replace controls and sensors Perform scheduled and assigned work including PM inspections, repairs, monitoring routes, troubleshooting, replacement, and programming of electrical equipment and controls Some mechanical work as required Assemble and install equipment using hand and power tools Trouble shoot and replace / repair defective parts Adjust clearances and align parts Problem Solving - trend and identify repeat causes of lost production time and develop solutions. Analyze information and evaluate to choose the best solution to solve problem Travel if needed Work a minimum of 20% OFF production hours each week (when the facilities are not running) Seek Support from Human Resources, Safety, Training and/or any other organizational needs. All other duties as assigned Safety Enforcing Policies and procedures including: Standard safety compliance items: PPE, LOTO, Hot work permits, Forklift safety, Fall Protection, Etc. Accident investigation/Return to work agreement Enforcement of violations Qualifications / Requirements: Industrial electrical experience up to 480 volts, electrical controls, and instrumentation. Practical experience with Variable Frequency Drives (VFD) and Pneumatics. Electrical Experience preferably in a production or industrial environment Ability to perform various electrical and mechanical tasks according to blueprints, schematics and/or technical drawings Strong background in a production setting troubleshooting and repairing electrical and mechanical components preferred. Able to work well with minimal supervision Ability to Prioritize tasks and follow specified procedures Proficient with Microsoft windows (Word, Excel & Outlook) Preferable experience with CMMS systems to monitor inventory, work orders & PMs Knowledge of PLC Controls is preferred

Full-time Description The Granite YMCA is seeking a skilled, mission-driven maintenance professional to join our dynamic overnight camp team as the Property & Maintenance Director. Reporting to the Executive Director, this role oversees the year-round care, maintenance, and improvement of all camp buildings and grounds to ensure a safe, welcoming, and fully operational environment for campers, staff, and guests. This leader not only excels at hands-on repairs and facility management, but also helps shape the future vision for our camp's infrastructure and physical footprint. Key Responsibilities Lead, supervise, and support the seasonal maintenance team Ensure the security and safety of all camp grounds and facilities year-round Perform facility and fleet repairs, maintenance, and upgrades as needed Build and maintain positive vendor partnerships (e.g., electrical, septic, construction, flooring) Partner on facility upgrades and long-term capital improvement planning Execute winter projects as directed by the Camp Director, Facilities Committee, and VP of Operations Manage maintenance inventory and supplies effectively Operate the Camp well system in compliance with DES Drinking Water Standards Maintain working knowledge of all applicable local, state, and federal regulations Utilize preventative strategies to reduce hazards and maintain high safety standards Sustain strong relationships with local emergency services Provide occasional facility support to other YMCA branches as needed Qualifications High School Diploma or GED required 5+ years of experience in one or more trades: plumbing, electrical, mechanical, carpentry First Aid/CPR certification required within 60 days of hire Proficiency with Microsoft Word, Excel, Outlook, and similar software Ability to work independently as well as collaboratively with cross-functional teams Previous experience in an overnight summer camp environment preferred This is a full-time salaried position with an extensive benefits package including: Generous paid vacation time (4 weeks paid time off & 6 Holidays to start that accrues with tenure) Medical, Dental and Vision Insurance Free 2 Adult Family YMCA Membership 50% discount on Preschool Childcare, School Age Childcare, Summer Day Camp, and Resident Camp services Discounts on Programs for yourself & family members including swim lessons, sports, personal training, and many more 25% discounts on Birthday Parties, Pool, and Gym Rentals After qualifying, 8% employer contribution to retirement fund Salary Description $45,000 - $48,000

Earn while you learn with the Elliot's Facilities Maintenance Apprenticeship Program! Start with on the job learning, and progress through four college level courses throughout our 2 year apprenticeship program. The Facilities Maintenance Apprentice will provide daily maintenance support while enrolled in a formal apprenticeship program or trade-specific post-secondary education program. Class Breakdown * 2-year program * 4,000 hours on-the-job learning * 305 hours of related instruction in partnership with Manchester Community College * During this time, you are a full-time employee, earning benefits and PTO Position Qualifications * Education: High School diploma or equivalent required. * Licensure/certification: N/A * Experience: No experience required. Experience with general maintenance or repairs preferred. * Knowledge: General computer skills required. Other Requirements: * Must be willing to accept an employment opportunity after program completion which may be a different schedule than your current one. Two-year commitment after completion of formal classes. * Attend at least 80% of all seminars, courses and labs to complete your academic program. * Attend regular meetings (monthly or more) with academic or career coach. * For internal candidates: employment must be in good standing. Reference will be obtained from current supervisor or manager. Must be employed by the Elliot minimum 6 months, and in current role for minimum 6 months. What You'll Do: * Support the maintenance department in the daily operations, maintenance, installations, and inspections. * Actively engage in learning essential skills and tasks. * Demonstrate skills and knowledge commensurate with years of experience or apprenticeship and education. * Maintain all necessary work hours, grades, and attendance to satisfy apprenticeship program or post-secondary education program. * Utilize protective safety equipment in performance of duties, such as lock out/tag out, universal precautions, etc. * Maintain a clean and safe working environment. * Follow instructions as given by maintenance leadership or appointee. * Maintain required logs and records. * Under the guidance of identified maintenance staff, perform routine preventive maintenance and/or inspection tasks. * Document work order notes and compliance inspection forms. * Make periodic checks of unmanned machinery spaces to verify the operation of designated machinery. * Observe system operations and ensure they are in accordance with established operating procedures and guidelines. * Perform other duties as assigned. Essential Job Functions * Work must be performed on site. * Ensure confidentiality of employee, legal, client/patient, budget, and all other company business. * Ability to concentrate, read and follow directions, and must be able to complete detailed instructions. * Attention to detail. * Ability to perform physically demanding work, requiring the ability to climb ladders, crouching, kneeling, bending over, standing, walking, etc. * Motor coordination, with manual and finger dexterity to safely work with tools and equipment. * Work is performed indoors and outdoors in all types of weather, working in both high and low temperatures. * Must be able to carry necessary tools to work sites. * Effective communication and collaboration skills with co-workers is important. * Provide on call support in a rotating schedule and cover shifts above and beyond their apprenticeship responsibilities in a Maintenance Mechanic roll as needed. Who You Are * Ability to work effectively as a member of a team. * Ability to exhibit flexibility. * Ability to become familiar with safety features and devices of all plant equipment. Why You'll Love Us: * Health, dental, prescription, and vision coverage for full-time & part-time employees * Short-term disability, long-term disability, and life insurance coverage * Competitive pay and earned time accrual plan * Tuition Reimbursement and career advancement opportunities * 403(b) Retirement Savings Plan * Supplemental benefits, including access to the Welliot Health Center * And more! Work Shift: 40 hours per week. First shift during two year apprentice program. After program completion: 1:00 PM to 11:00 PM Wednesday, Thursday, Friday, and Saturday 9:00 AM to 7:00 PM. SolutionHealth is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, disability status, veteran status, or any other characteristic protected by law.

Job Description MAINTENANCE MANAGER Our client is seeking a Maintenance Manager for one of their flagship apartment communities. The ideal candidate is a proven leader, must be skilled in all areas of general maintenance and must be able to perform physical maintenance operations of the property. YOUR ROLE Lead and manage the onsite maintenance team to a world-class standard. Conduct routine inspection and preventive maintenance of all building-related systems Coordinate response to resident maintenance requests in a timely and efficient manner Reliably handle emergency situations and quickly communicate issues to your supervisor and fellow team members Develop and manage an on-call schedule with neighboring sites Effectively manage the apartment turnover process Oversee selection and management of all maintenance-related vendors Potential multi-site management Manage capital projects onsite as needed including the bid process and project/construction management Assist with the creation of the property budget and ensure cost effectiveness across all maintenance-related areas YOUR VALUE Dedication to the Residents - always work to resolve their issues and exceed their expectations, doing so in a timely manner with open communication Dedication to the Vision - always represent the high standards set for ourselves and each other Dedication to Your Team - always be willing to roll up your sleeves and get the job done -no job is “below your pay grade” YOUR SKILLS 3+ years of experience in Residential Property Management (preferably as a Manager) Skilled in all areas of maintenance, turnover, and building systems Willingness to jump in and learn new tasks and systems Ability to work independently Desire to take initiative and solve problems Excellent communication skills, both written and verbal THE PERKS! Market Competitive salary, on-call and overtime pay, bonuses and performance-based incentives. Comprehensive health, dental, and vision insurance plans. Professional development opportunities. Generous vacation and leave policies. Potential Onsite Housing (allowance)

The Market Maintenance Manager is responsible for attending to the physical upkeep of the property and ensuring that resident work requests are serviced both timely and effectively, within and in accordance with the standards expected at a Corcoran-managed property and the parameters of the approved annual operating budget. Location: Washington Mills, Lawrence, MA. Schedule: Monday through Friday, 8:00 am - 4:30 pm. On-call rotation required. Eligible for a $2,500.00 sign-on bonus! ESSENTIAL DUTIES: • Ensure all equipment and supplies needed for maintenance are on hand and that the most competitive price is sought. Consistently obtain pre-approval from the PD/PM for all unbudgeted purchases in excess of $500. • Schedule and supervise maintenance/janitorial/ grounds staff to maximize efficiency and provide for both routine and preventive maintenance in a timely manner. • Participate in the hiring interview process for staff and make recommendations on employment matters as requested. • Ensure all units are inspected on an annual basis 120 days prior to lease renewal. • Inspect all units upon vacating and submit report to rental manager for inclusion in deposit settlement. • Coordinate with Property Manager/Rental Manager/Assistant Manager to ensure that units are correctly accounted for in the system (vacant vs. occupied) and that units are ready to red dot on a timely basis. • Ensure emergency response is provided on weekends, evenings and holidays and participate in the coverage schedule. Notify the answering service of the on-call schedule. • Maintain adequate records of preventive maintenance work, work orders, apartment refurbishing, annual inspections, purchase orders and overtime reports; submit reports on a timely basis to the PD/PM. • Ensure all equipment is maintained and serviced pursuant to the recommendations of the manufacturer and the schedule set by the Corcoran Management Company. • Ensure that hall, stairwell, outside and common area lights are checked regularly and any lighting that needs to be replaced is completed on a timely basis. • Constantly be aware of potential safety problems and make necessary corrections if possible or bring to the attention of the PD/PM. Important areas of concern are walkways, stair treads, lighting and locks. Always be aware of uneven surfaces or worn materials. • Responsible for key control system in accordance with CMC policy. • Keep accurate records and files on contracts and suppliers, their services and products, as well as all utility shut-offs, both for the buildings and individual units. • Ensure maintenance staff are in uniform while on the job and that all work is done in a safe and professional manner, including using appropriate safety gear at all times. • Coordinate the snow removal effort; ensure all efforts are made to open up the property in a timely manner and that hazardous conditions do not exist. Maintain snow removal logs. • Ensure that grounds are properly maintained and mowed; coordinate the annual landscape program. • Maintain paperwork and vendor records; consistently utilize the invoice system technology to process invoices. REQUIRED EDUCATION/EXPERIENCE: High School Diploma or equivalent combination of education/experience. Minimum of 3 years' trade experience or general building maintenance. Working knowledge of the equipment used in this job, including electrical and mechanical systems. Ability to read, write and communicate in English. Ability to follow detailed instructions. Ability to pass background screening, Drug screening, Physical, and Agility tests at time of hire and throughout employment. Monday through Friday 8:00 am - 4:30 pm. On-call rotation required.