Technician jobs in Duluth, GA

Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. Compensation: $38/hour Location: Mableton, GA Shifts: Monday - Friday, 9:00 PM - 5:30 AM Shift Differential: 6%-8% of the base hourly rate for applicable hours worked Responsibilities: The Mechanic B role is an advanced level machine technician that would be responsible for fully understanding an assigned machine center, while being fully capable of performing minor repairs, PMs and troubleshooting and the machine. This role will build necessary capabilities to take on a mechanic level role at full development. Perform routine preventative and corrective maintenance and testing on equipment Perform maintenance tasks to include repairing and improving, from minor rebuilds to major overhauls on all equipment Identify processing waste reduction opportunities and assist in reduction projects Participate in preventative maintenance program to help reduce costs of operations through PM optimization Dismantle, clean, repair and test electrical, electronic and mechanical components to determine component-level failure Communicate, coach, and train employees to continuously improve team's ability to prevent loss of production and respond safely to equipment failures Maintain preventative maintenance logs and accurate records of all testing and repairs Recommend equipment to be included in preventive maintenance programs Perform preventative maintenance tasks to identify all potential mechanical and electrical issues with equipment throughout the plant Rebuild worn-out, but reusable, pieces of equipment, such as gearboxes for scheduled PM's Troubleshoot, investigate, and repair all mechanical, electrical, and pneumatic machine systems Eliminate machine failures from recurring by utilizing the Breakdown Analysis process Focus areas will include but are not limited to Production support, Mechanical Room, Water Processing, Boiler Room, and Wastewater Treatment Water Chemical Treatment Program Qualifications: High School Diploma, GED, or equivalent work experience; additional technical training or certifications desired Three or more years proven maintenance experience in a manufacturing environment Candidates must complete the Mechanical Aptitude Test before being considered Prior experience with high-and low-pressure compressors, chillers, water treatment, boilers is preferred Strong technical knowledge of compressed air systems (pneumatics), electrical systems, hydraulics and water processing is preferred Knowledge of bottling equipment, PM programs and SAP system preferred Must have electrical knowledge of single and three phase power including the ability to diagnose and replace electric motors Must be able to work and accomplish projects with little to zero supervision Must be able to foster and build a team-work environment Communicate effectively with operators, technicians, mechanics, and supervisors Able to read, interpret, and analyze computer generated reports and accurately complete all tasks Must be able to do physical inspections of equipment that will require climbing, reaching, and extending arms overhead Able to lift and pull 50 lbs. as needed while performing work Must be proficient reading mechanical drawings / schematics and OEM technical prints Proficient computer skills, including the use of Microsoft Office applications Available for call-ins or to cover all shifts to support production teams as required Work together with Safety department to achieve a zero-injury workplace Must display a positive mental attitude and be open to a fast paced ever changing work environment. Primo Brands' established portfolio includes billion-dollar brands Poland Spring and Pure Life , premium brands like Saratoga and Mountain Valley , regional leaders such as Arrowhead , Deer Park , Ice Mountain Ozarka , and Zephyrhills , purified brands, Primo Water and Sparkletts , and flavored and enhanced brands like Splash and AC+ION . Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come. Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. Candidates must possess strong English language skills to effectively communicate with customers and provide exceptional service. Proficiency in English is essential for understanding customer needs, resolving inquiries, and collaborating with team members.

TruckPro is seeking a Diesel Mechanic for Heavy Duty Trucks who will be responsible for repairing medium to heavy duty trucks and all models of trailers to specific customer and industry-standard specifications. Benefits for Diesel Mechanic: Competitive Pay 2nd shift (230pm - 11pm) Paid Training Employee Referral Bonus Medical, Dental and Vision 401K -- with company match Paid Time Off -- NO WAITING PERIOD Paid Holidays Tool Purchase Reimbursement Safety Boot Purchase Reimbursement Company culture grounded in customer service and values its people Diesel Mechanic Responsibilities Include: Perform repairs to customer vehicles and trailers Perform basic welding functions Inform customer/manager of completion times, services expenses, and possible changes Monitor the profit/loss of each job to maximize profitability while maintaining the highest standards of quality; minimize warranty claims and re-work Submit work orders for invoicing Maintain inventory and supplies Prepare list of required replacement parts Clean work area as required and maintain equipment; Adhere to all environmental, health and safety standards Successful Diesel Mechanic Candidates Will Have: Two years of diesel mechanic (truck) experience within the heavy-duty industry Automotive Service Excellence certification appropriate to the job or equivalent Possess your own tools and/or the willingness to purchase tools required for the job as you advance in your skill level and responsibilities ( TruckPro offers a tool purchase or reimbursement program ) Ability to lift part up to 50+ lbs Valid driver's license and/or CDL with good driving record TruckPro offers a stimulating workplace based on open collaboration, personal development, and future opportunities. Our continued success thrives on the attraction and retention of spirited people who share our passion for customer service. Physical Requirements: These physical demands are representative of those an associate must meet to be able to successfully perform the primary duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the primary duties: The role is a physically active role Will be required to lift, pick, pull, and stock heavy duty truck parts that might be in excess of 50+ lbs with lift assist devices Will be required to stand for long periods of time on a variety of surfaces and will be required to operate a forklift Will frequently be required to: walking, bending, twisting, stepping, stooping, reaching, lifting, pushing and climbing Will frequently use a computer in the course of completing daily activities Work Environment: The work environment described are representative of those an associate encountered while performing the primary duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the primary duties. The associate will be regularly exposed typical inside and outside environmental conditions, including, but not limited to dirt, dust, vibration, minimal chemical hazards, noise and temperature variances Exposure to hazards or physical risks, associated with a warehouse, vehicle services, and retail operations, which require following basic safety precautions E-Verify: TruckPro validates right to work using E-Verify. TruckPro will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee's Form I-9 to confirm work authorization. "TruckPro is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, or genetic information, or any other characteristic protected by law." #LI-MW1

Overview: Performs diagnostic and interventional procedures to include but not limited to: angiography, venography, myelography, nephro-ureteral, and gastrointestinal studies, and modality assisted drainage and biopsies. Completes all post processing functions. Performs related record keeping and patient care functions. Ensures the utilization of established protocols and techniques differentiating for adolescent, adult and geriatric patient population in the performance of diagnostic procedures and functions. Responsibilities: Performs diagnostic and interventional procedures to include but not limited to: angiography, venography, myelography, nephro-ureteral, and gastrointestinal studies, and modality assisted drainage and biopsies. Completes all post processing functions. Performs related record keeping and patient care functions. Ensures the utilization of established protocols and techniques differentiating for adolescent, adult and geriatric patient population in the performance of diagnostic procedures and functions. Qualifications: Education Graduate of an AMA approved Radiologic Technology program or JRCERT accredited hospital-based training program Required Work Experience 1-year of experience Required Licenses and Certifications Registered by the American Registry of Radiological Technologists (R) plus Advance Certification by ARRT in Vascular-Interventional Radiographer (VI) or Cardiac-Interventional Radiographer (CI) Required Additional Licenses and Certifications BLS Certified Required Business Unit : Company Name: Piedmont Hospital

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment. · Independently performs maintenance as per industry standards. · Works with customer counterparts to optimize maintenance, reliability, and preventative maintenance procedures. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Conforms and complies with customer contractor codes of conduct, housekeeping standards, and safety processes · Documents work performed in service reports, applicable management systems, and written explanation regarding observation and collected equipment performance data. · Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development. · Troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. · Utilizes advanced maintenance technologies to collect equipment performance data. Observes trends and makes recommendations. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 10 years of related experience in specific industry; or, 12 years of experience in specific industry. · Possesses comprehensive understanding of electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate. · Extensive travel required. (Local, National, International) Desirable KSAs: · Experience in condition based maintenance techniques, precision mechanical alignments, and maintenance of applicable process equipment. · Experience in programmable logic controllers, field device troubleshooting, and maintenance of electrical drive and motor systems. Competencies: · Communications · Customer Focus · Personal Discipline · Safety Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Full time under W2 Onsite Role Pay Rate: $19 - $20.50 an hr Schedule: Mondays - Fridays, 8AM to 5PM Technical work as Windows 11 installation technician for - New PC setup (Windows 11, M365, MS MFA, Data Transfer, additional software installation) - Recovery of returned PCs (cleaning, minor repairs, asset management) - Inventory management of returned PCs and newly ordered PCs - Facilitation of PC repairs of returned PCs where needed and in alignment with PC Lifecycle Service guidelines (warranty repairs via HP) - End of life processing of PCs at the end of lease / lifecycle in alignment with PC Lifecycle Service guidelines (return of hardware to HP) - User interaction during PC setup / redeployment / retirement

TRC Talent Solutions is currently looking to fill a contract position with a company located in Marietta. This is an ongoing contractual position Monday-Friday 8-5pm. The ideal candidate will have prior hardware installation technician experience installing and configuring desktops, laptops, servers, printers, network devices, etc. Key Responsibilities: Hardware Installation: Install, configure, and deploy various IT hardware including desktops, laptops, servers, printers, network devices (routers, switches), and other peripherals. Troubleshooting: Diagnose hardware issues and perform repairs or replacements as necessary. Troubleshoot connectivity issues and ensure optimal performance of installed hardware. Maintenance and Upgrades: Conduct routine maintenance tasks such as cleaning, firmware updates, and hardware upgrades to ensure systems are operating at peak performance levels. Documentation: Maintain accurate records of hardware inventory, installations, repairs, and configurations. Document procedures and technical specifications for reference purposes. Compliance and Security: Ensure compliance with organizational policies, procedures, and security protocols during installations and maintenance activities. Implement security measures to protect hardware from unauthorized access or damage. Customer Support: Provide technical support and guidance to end-users regarding hardware issues. Assist with user training on proper usage of hardware devices. Qualifications: Proven experience as an IT Hardware Installation Technician or similar role. Solid understanding of computer hardware systems, components, and peripherals. Proficiency in hardware installation, configuration, and troubleshooting. Familiarity with networking concepts and protocols. Ability to lift and move heavy equipment safely. Excellent problem-solving skills and attention to detail. Please no C2C candidates and candidates must live in the Atlanta area.

FUNCTIONAL PURPOSE: Independently performs the full range of diagnostic, preventive maintenance, alignment and calibration, and overhaul tasks, on both hardware and software on a variety of mail processing, customer service, and building equipment and systems, applying advanced technical knowledge to solve complex problems. DUTIES AND RESPONSIBILITIES: Performs complex testing, diagnosis, maintenance, alignments and calibration, overhaul, and revision, of electronically operated or controlled equipment or systems; may be required to perform maintenance of associated electromechanical equipment and systems. Observes the operation of systems and equipment, and applies various testing and diagnostic methods and procedures to locate and correct malfunctions and/or failures and ensures maximum system performance. Performs equipment inspections to assess the quality of service or maintenance received, and to discover incipient malfunctions; initiates work orders requesting corrective actions for equipment not meeting maintenance or operating standards; estimates time and materials necessary to make corrections and conducts investigations of frequent or serious equipment failures to determine the cause of the breakdown and to recommend remedial maintenance action. Recommends changes to servicing and preventive maintenance activities; assists in the revision of preventive maintenance and operator checklists, and their frequency to sustain the proper degree of maintenance. Performs analyses of equipment failures; reviews operational reports, audits, and other information, to determine where operational enhancement can be made to prevent equipment or systems deterioration. Participates in the installation, removal, modification, assembly, and/or disassembly of systems and equipment. Participates in classroom, on-the-job, and correspondence training programs; attends courses at postal facilities, trade schools, and manufacturers sites; assists in developing and implementing training programs; provides on-the-job training to other lower level maintenance employees. Provides technical support to other employees in the facility or in installations within the area served; performs in-process and final operational checks and tests work completed by other employees; may work without direct supervision. May drive a vehicle or use other appropriate modes of transportation in the course of assigned duties. Follows established safety practices and requirements while performing all duties; reads and adheres to instructions listed in applicable maintenance directives; maintains a library of maintenance directives. Performs other duties as assigned. REQUIREMENTS: Ability to demonstrate mechanical comprehension to learn and apply mechanical principles, including a working knowledge of basic mechanical operations (such as levers and pulleys) and the application of physical laws (such as force and gravity). This includes knowledge in the following areas: (A) Power transmission--such as gears, sprockets and chains, belts and pulleys; (B) Power translation--such as cams and cam followers, linkages, springs; (C) Friction reduction'such as bushings, bearings; (D) Fasteners--such as screws, nuts and bolts, pins, rings, clips, couplings. Knowledge of basic electricity principles; this includes knowledge of Ohm's law, Kirchoff's law, AC-DC circuitry, relays, switches, and circuit breakers. Knowledge of the National Electrical Code may be required for employees in a skilled position. This also includes knowledge of techniques and procedures as used in electrical installations and maintenance (circuit protection, wiring, conduits, etc.). Knowledge of electronic principles; this includes knowledge of (A) basic logic gates, symbology, resistors, memory, encoders, decoders, etc.; (B) Hardware/components - such as solid state devices (diodes, transistors, etc.), coils, capacitors, etc.; (C) Digital circuit components - as in registers, adders, counters, memories, flip-flops, encoders, decoders, etc.; and D) AC and DC circuitry - as in circuit analysis, schematic interpretation, etc. Knowledge of and ability to follow safety and security procedures for performing maintenance work This includes knowledge of industrial hazards (e.g., mechanical, chemical, electrical, electronic) and procedures and techniques established to avoid injuries to self and others such as lock out devices, protective clothing, and waste disposal techniques. Knowledge of current computer technology to understand how technology may be applied to solve a problem or improve system design; this includes knowledge of hardware, software and networking technology/systems and integrated computer systems. This includes knowledge related to: (A) the Operation of computer terminals or other peripherals to enter, operate, and exit programs; to use the systems programs and (B) Retrieving and interpreting reports for diagnostic and information purposes. Ability to perform mathematical calculations such as addition, subtraction, multiplication, and division correctly; to solve practical problems by selecting from a variety of mathematical techniques such as formulas and percentages. Ability to remember material learned earlier refers to the ability to recall specific information and/or theoretical knowledge and apply it to mechanical, electrical, or electronic maintenance work such as inspection, troubleshooting, equipment repair and modification, preventive maintenance, and installation of electrical equipment. Ability to troubleshoot problems to analyze the root cause of a specific error and decide what action to take to prevent recurrence; to back track from a specific problem to identify the source of the error. Ability to think logically and critically; to understand the relevance of information; to identify relationships between information and data. Ability to think of possible causes for problems and find solutions; to choose the best course of action; to make a decision without delay when the opportunity arises or when all desired information is not available. Ability to learn and comprehend new or unfamiliar material; to use multiple approaches to grasp or learn the implication of new information; to quickly incorporate information and ideas. Ability to comprehend spatial relations as required to perform maintenance work; to form three-dimensional mental pictures of objects; to know what an object would look like when viewed from a different angle; to determine if something will fit in a specified area. This may include the ability to use technical drawings (e.g. diagrams, blueprints and schematics). Ability to read and comprehend job related written materials; this also includes the ability to locate, read, and comprehend text material such as handbooks, manuals, bulletins, directives, checklists, and route sheets. Ability to communicate work related information in writing to maintenance, operations and other personnel to complete forms or provide routine and technical information (e.g., in work logs, e-mails, memos and technical reports/documents). Ability to follow oral and written directions, instructions, rules, policies and/or procedures correctly and in order.Ability to develop and maintain effective working relationships; to work with teams; to help others; to accept suggestions; to treat others with dignity and respect. Ability to demonstrate organizational commitment to the public service goals and mission of the Postal Service. Ability to be conscientious to carry out job tasks; to be responsible and dependable; to take care in performing routine and novel tasks; to track details; to check that all work is accurate and complete; to record information accurately. Ability to work from heights refers to the ability to perform safely and efficiently the duties of the position above floor level such as from ladders, catwalks, walkways, scaffolds, vert-a-lifts, and platforms. Knowledge and ability to use various hand or portable power tools in performing mechanical, electrical, electronic or other maintenance work; this may include the use of shop power equipment. This ability includes the safe and efficient use and maintenance of such tools as screwdrivers, wrenches, hammers, pliers, chisels, punches, taps, dies, rules, gauges, and alignment tools; refers to the knowledge of, and proficiency with, various power tools; the ability also involves the safe and efficient use and maintenance of power tools such as drills, saws, sanders, and grinders; refers to the knowledge of, and proficiency with, shop machines such as bench grinders, drill presses, and table/band saws. Knowledge and ability to use test equipment, gauges or tools to take measurements and/or to take measurements with electrical or electronic test equipment (such as VOMs, oscilloscopes, amprobes) to perform maintenance work; this includes various types of maintenance equipment and may monitoring the operation of a system or machine or use of data networking test equipment. EXAMINATION REQUIREMENTS: Applicants must successfully complete Postal Service Test 955, for the Electronics Technician job group, which measures maintenance knowledge, skills and abilities. In addition, applicants must successfully complete a structured interview evaluation. ADDITIONAL PROVISIONS: 1. Applicants must be able to operate powered industrial equipment. 2. For positions requiring driving, applicants must have a valid state driver's license, and demonstrate and maintain a safe driving record.

HSAGP (Hyundai-SK America Green power) Energy LLC. is Hyundai Motor Group and SK On' s joint venture company to produce batteries for electric vehicle batteries. The joint venture plans to invest $5 billion to build an EV battery cell plant in Bartow County, Georgia. Hyundai Motor Group and SK On will each hold a 50 percent stake in the joint venture. The new plant created by the two companies is expected to start manufacturing battery cells in the first half of 2026 with an annual production capacity of 35 GWh, enough to support the production of 300,000 EVs a year. The future Bartow County plant in northwest Georgia is strategically located near Hyundai Motor Group's existing and planned U.S. facilities. Hyundai Motor Group broke ground last year on the new Hyundai Motor Group Meta plant America in southeast Georgia to make future Hyundai, Genesis and Kia EVs. For more information visit our website Join us on the journey of two companies' massive electric vehicle project in Bartow County! Summary: Mechanical technician in Utility is responsible for managing various mechanical facilities and their parts including air compressor, boiler, chiller, clean/dry room facilities, firefighting facilities, HVAC, and infra. Its main tasks include regular status check, fueling, replacement, and cleaning. This position is also required to take appropriate measures when there is any malfunction or damage of facilities. Job Duties and Responsibilities: Air Compressor Facility Maintenance Check and inject compressor motor oil if needed Disassemble and check compressor filters. Replace filter parts if needed Disassemble and cleanse compressor auto drain trap Run test operation of compressor Run test operation of air dryer Disassemble, cleanse, and test Air T/K(PA, IA) drain trap Disassemble and check dryer filters. Replace filter parts if needed NMP Recovery Facility Maintenance Measure circulating pump vibration coefficient Disassemble and cleanse circulating pump strainer regularly Grease motors Check tracing status before winter for freezing prevention Check operation status of eye shower Replace Fan V-belt A/C Tower Maintenance Grease A/C towers and air supplying/exhausting fans Replace V-belt of A/C towers and air supplying/exhausting fans Steam Boiler Facility Maintenance Replace and cleanse the micro-filter of water softener and purifier Disassemble and clean the chemical line Test LNG line instrument and leakage Set(blow-down), disassemble, and clean glass water gauge Test upper/under part of blow-down C/V function Disassemble and maintain condensate pump strainer and heat transmitter Disassemble and maintain DEMI pump strainer and heat transmitter Disassemble and maintain deaerator, boosting pump strainer and heat transmitter Grease and oil pump and run operation test Measure boosting pump vibration coefficient Grease and oil boiler fans and motors Check and maintain heat transmitter and S/T of boiler fans and motors Repair or replace boiler accessories and PG/TG Measure fuel consumption and make adjustment if needed Hot Oil Boiler Facility Maintenance Test LNG line instrument and leakage Grease and oil pump and run operation test Eliminate air and moisture in the expansion tank Measure hot-oil boiler pump/fan vibration coefficient Grease and oil boiler fans and motors Check and replace v-belt of fan if needed Chiller Facility Maintenance Run operation test of chiller expansion tank line Disassemble and maintain make-up water strainer Grease chiller cool water pump and remove strains Grease chiller cooling water pump and remove strains Inject chiller C/T (Cooling Tower) decelerator oil and run test operation Grease chiller C/T fan motor and run test operation BCU/BFU/FFU Maintenance Check BCU differential pressure and replace medium filter Replace BCU pre filter Replace BFU/HFU filter HVAC facility maintenance Grease HVAC inner fan bearing Check HVAC inner sensors and drainage status Test differential pressure sensor operation Disassemble and cleanse cool/steam/condensate water line strainers Adjust tension of v-belt and replace if needed Replace HVAC filter regularly Replace HVAC air vent and operate air purge Repair and replace HVAC steam trap and PG/TG EHP, PAC, Air Shower Facility Maintenance Check EHP/PAC operational status, and outdoor unit pressure condition Clean EHP/Package filter Replace Air Shower filter N2, NG Facility Maintenance Check and replace the meter Supervise PSC Popping test construction Legal Inspection Management Deal with regular inspection of government offices Document/keep legal inspection logs and related documents Facility Management Create and update facility management history Create and update inspection log Clean the facilities and facility room floors [Boiler only] Supervise pipe cleaning work Prepare and response to the legal inspections including open/in-use inspections [Chiller only] Purchase and manage inventory of C/T chemicals [HVAC only] Supervise pipe cleaning work Prepare and response to the legal inspections including open/in-use inspections Troubleshooting Take appropriate measure when the facility is malfunctioning or damaged Other tasks as necessary to meet the organization's needs Role Duties and Responsibilities: The S1 level is particularly expected to the following roles to perform the job successfully and contribute to meet the organization goals. Perform routine tasks under direct and/or indirect supervision Possesses broad knowledge of equipment, tools, and instructions/procedures obtained through work experience Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education: High School Diploma or GED (General Education Development) (Preferred) Associate degree in related field Experience: 0-2 years of experience in EV Battery, auto part, automobile industry, or similar high-volume manufacturing in electric or chemical component Language skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals in English Ability to write routine reports and correspondence in English Computer skills: Basic skills in Microsoft Office (Excel, Word, PowerPoint, etc.) Physical Requirements: In the office: Must wear the company-provided uniform In the production site: Must wear the company-provided uniform and PPE including safety shoes, safety helmet (hard hat), safety glasses/safety goggles, portable gas measuring device In the A/C tower: Must wear dust-proof mask When exposed to NMP, hot oil: Additionally wear gas mask, dust-proof mask, chemical resistant clothing Work Environment: (Additional local research required) Usual office environment Production/construction site Risk of noise: Above 90db in compressor room Risk of high temperature: 104~122°F in boiler room, machine room, vacuum pump room Potential exposure to hazardous materials (heating medium oil, NMP, water treatment chemicals (boiler treatment compound, acidity regulator, etc.)) and various kinds of lubricating oils The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards. Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards. May occasionally left and/or move up to up to 50 pounds. Must be able to regularly stand, walk, sit, talk or hear. The employee is occasionally required to reach with hands and arms to include stoop, kneel, bend or crawl. Core Competencies: Professional Competencies: Advanced understanding of UT facility Advanced troubleshooting ability to deal with facility malfunctions Advanced understanding of measuring tools and methods Ability to manage and prioritize workload Prepare routine documentation as required under limited supervision Ability to solve problems related to utility (mechanical) that might require analysis to understand Role Competencies: Performance Impact: Perform routine tasks required for floor operations for relatively complex and difficult equipment (or production process) compared to S1 level Perform under direct and/or indirect supervision and follow standard instructions/procedures Suggest improvements in floor operations based on floor experience and Knowhow Expertise: Generally, require high school diploma or GED (For equipment maintenance, require knowledge/skills equivalent to an associate's degree) Require to complete internal/external training required to perform the job Possess broad knowledge of equipment, tools, and instructions/procedures obtained through work experience; Able to operate tasks of three to four sub- processes Identify irregularities and troubleshoots (encountered problems are routine but should be resolved through understanding of the equipment (or production process) Collaboration and Supervision Build stable and collaborative relationships within and across teams Take first action and report to superiors when identifying any irregularities which are not compliant to the instructions regarding work environment, equipment operation, raw materials, and quality of products Provide technical coaching and advice to S1 level members on the equipment (or production process)

Who we are: Delta, founded in 1971, is a global provider of power and thermal management solutions. Its mission statement, "To provide innovative, clean and energy-efficient solutions for a better tomorrow," focuses on addressing key environmental issues such as global climate change. As an energy-saving solutions provider with core competencies in power electronics and automation, Delta's business categories include Power Electronics, Mobility, Automation, and Infrastructure. About the role: The Cooling Field Service Engineer is responsible for commissioning, maintenance, troubleshooting, and repairing cooling systems in the data center. The role involves traveling to client sites, ensuring equipment operates efficiently, and delivering high-quality service to maximize customer satisfaction. Key responsibilities: Commission, inspect, and service cooling systems and related equipment. Perform routine preventive maintenance, testing, and calibration of cooling systems. Diagnose mechanical, electrical, and control issues; carry out necessary repairs and adjustments. Respond to customer service calls, provide on-site technical solutions, and ensure timely resolution of issues. Provide technical training and support to clients on system operation and best practices. Maintain accurate service records, documentation, and reports. Collaborate with engineering and product teams to provide feedback for product improvements. Ensure compliance with safety regulations, environmental standards, and company policies. Manage spare parts, tools, and equipment efficiently. Support continuous improvement initiatives and uphold high service quality standards. Minium Qualifications: Bachelor's degree or diploma in Mechanical Engineering, Electrical Engineering, Refrigeration, HVAC Technology, or related field. Proven experience in servicing HVAC/refrigeration/cooling systems. Strong knowledge of thermodynamics, fluid mechanics, and control systems. Ability to read and interpret technical drawings, wiring diagrams, and service manuals. Proficient in troubleshooting and repairing mechanical and electrical components. Good communication and customer service skills. Willingness to travel frequently and work independently. Certification in HVAC/R or relevant trade license (preferred). Familiarity with industry standards (ASHRAE, EPA, F-Gas, etc.) is a plus. Working Condition: Frequent travel to customer sites (regional/national). On-call availability for emergency support. Exposure to mechanical, electrical, and environmental hazards (with required PPE provided). Degree/diploma in Mechanical Engineering, Electrical Engineering, HVAC Technology, or related field. Hands-on experience in servicing cooling products (HVAC, refrigeration, chillers, cooling towers, or similar equipment). Strong knowledge of thermodynamics, refrigeration cycles, and control systems. Ability to read and interpret mechanical/electrical drawings and technical manuals. Excellent troubleshooting and problem-solving skills. Strong communication and customer service orientation. Willingness to travel frequently and work independently. HVAC/R certification, EPA/F-Gas license, or equivalent (preferred). Benefit at Delta Electronics Americas: Life at Delta EEO Statement: Delta Electronics Americas is an Equal Opportunity Employer and is committed to compliance with all applicable federal, state, and local laws. Delta Electronics America is committed to fostering a diverse, inclusive, and respectful workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, age, marital status, national origin, disability, veteran status, or any other protected characteristic. Actual pay will depend on factors such as location, skills, experience, market conditions, and business needs. This role may also be eligible for incentive pay, subject to the terms of the applicable plan. Eligible employees receive company-provided benefits in accordance with plan terms and eligibility requirements. Benefits include health coverage, wellness resources, retirement savings plan, paid time off, and other company sponsored programs; parental leave is provided in accordance with applicable law.

Would you like to work as Field Service Technician joining a dynamic company at the forefront of technology? *This position entails at least 60% to 80% of travel throughout the U.S. and its territories, Canada, Mexico, South and Central America Company: One of the world leaders group specialized in designing manufacturing filling and capping machines for liquid products. Job Summary: Provide the installation, commissioning and maintaining of equipment at customer's facility Assure on-site technical support and troubleshooting of equipment Perform preventive maintenance Customer trainning Read & interpret electrical documentation, hardware drawings and program terms for troubleshooting Read & comprehend plant drawings and layouts Prepare service reports and complete and submit all service documentation Perform all work in compliance with safety standards and guidelines The description provided above is not intended to be an exhaustive list of all job duties, responsibilities and requirements. Duties, responsibilities and requirements may change over time and according to business need. Profile: B.S. in Mechanical or Electrical Engineering Experience in a similar position Excellent mechanical industry skills with strong electrical capabilities (if possible in special machinery maintenance) Technical skills Computer skills (MS Office) Expertise on SAP and MS Office Fully proficient in English, Spanish or French is a plus Strong analytical and problem- solving skills Service-oriented Offer: Attractive salary Paid vacation & holidays Annual bonus Extra time paid Full time job Pay Range : 30$/hour - 38$/hour

Role - Datacenter Technician. Type - Full time / Onsite. Experience - 8 + Years Job Description - Hardware Deployment (Racking & Stacking) : Install, rack, and secure servers, network devices, and storage systems according to company standards. Perform equipment unboxing, inventory verification, and physical labeling. Ensure proper weight distribution, rack cleanliness, and safe handling practices. Structured Cabling & Connectivity : Install, route, and dress copper and fiber cabling within racks, overhead cable trays, and underfloor pathways. Terminate and test network and power cables using approved tools and methods. Maintain cable documentation, labeling, and port mapping for accuracy and traceability. Power & Cooling Coordination : Connect equipment to PDUs following power budgets and redundancy requirements. Verify airflow management best practices (blanking panels, cable management, containment pathways). Work with facilities engineers to ensure equipment placement aligns with cooling capacity. Data Center Operations Support : Perform regular floor walks to check rack conditions, cabling integrity, and power distribution. Assist with inventory management, spare parts tracking, and stock organization. Support troubleshooting of physical layer issues (loose connections, failed cables, mispatches). Safety, Compliance & Documentation : Follow established safety practices including proper lifting and LOTO where applicable. Maintain accurate logs of hardware installations, cable changes, and rack power allocations. Ensure adherence to site standards for cabling, labeling, and physical security. #LI-KR1 Salary Range - $60,000 - $80,000 a year

What will you be doing? Preventative maintenance and repair of mechanical, electrical, and Habasit specific equipment. 's opportunities: Direct hire opportunity Eligible for bonuses and incentives $500 bonus after 90 days of employment $500 additional bonus after 180 days of employment $1000 additional bonus after 365 days of employment $750 referral bonus after 6 months Qualifications Must be 18 years of age Must be cleared on any background screening English literacy High School Degree or GED Maintenance Experience (Trade School, Previous Employment, Certificates, etc.) High Competency of pneumatic and hydraulic components Knowledge of Basic Electrical / Electronic Circuits and Wiring Read and understand Mechanical Blueprints Ability to use a calculator and a tape measure. Intermediate computer skills. Must have working knowledge of OSHA safety requirements. Knowledge and/or skills for Metal Fabrication (Mig, Tig, Grinders, Saws, Tap-n-Die, etc.) Why should you join our team? Our amazing environment keeps safety as its top priority! You can enjoy a collaborative atmosphere in a clean and climate-controlled facility. Our core values is how we thrive, and you will get to work with people who share them: Organizational Pride, Highest Ethical Standards, Quality You Can Trust, Collaboration, Entrepreneurship, and Continuous Improvement. Our opportunities to advance give any qualified associate the opportunity to move to a higher-level job. Our on-the-job training and skills development will ensure your success in your job. Our competitive pay rate $28.00/Hr - $33.00/HR If you are interested in becoming a part of a World-Class Team, submit your application today! OVERVIEW OF POSITION: Repairs equipment and programs PLC's, including automated machines, controls, panels, relays, circuit breakers, communication systems and alarms. Installs electrical equipment with minimal instructions. FIRST SHIFT IS MANDATORY FOR THE FIRST 6 MONTHS OR UNTIL TRAINING IS COMPLETED. RESPONSIBILITIES OF THIS POSITION: Level 1 Duties · Operate electrical hand tools as well as voltage, ampere and temperature measuring devices. · Work from blueprints, drawings, sketches or layouts. · Diagnose problems in order to replace or repair parts/machinery as required. · Operate and maintain basic Maintenance Department equipment and machinery. · Perform scheduled preventive maintenance as directed. · Troubleshoot and repairs equipment. · Assemble, fabricate and install parts, equipment and machinery. · Notify maintenance management of any abused and or misused equipment and/or machinery. · Notify maintenance management of shortage of supplies. · Participate in problem solving teams. · Follow all housekeeping and safety regulations. · Fill out necessary paperwork. (eMaint program, RMA documentation, Tool Repair, etc.) · Manage assigned workload and prioritize to minimize productivity losses. · Perform Lockout / TagOut procedures as a Habasit "Authorized Associate". · Assist other maintenance personnel. · Perform janitorial duties as directed. (Housekeeping, machine cleaning, facility cleaning, etc.) · Perform snow removal. · Perform grounds keeping tasks as directed. · Is on call to come to work during off shift hours to help out in emergency situations. · Any other duties as assigned. Level 2 Duties · Perform complex wiring assignments. · Install and repair power, lighting, and electronic control circuits. · Provide technical assistance to lower level maintenance electricians. · Improve and maintain preventative maintenance program for Habasit assets. · Repair and maintain equipment as needed and/or as directed by PM schedule. · Ability to program PLC in Siemens and Allen Bradley format. · Maintain OSHA compliance and records for site and equipment. · Work with vendors to produce parts for machines and maintain spare part inventory. · Maintain building and all maintenance contracts, such as cleaning services, landscaping, etc. · Install any additional utility extensions and networking services. · Any other duties as assigned. COMPETENCIES/SPECIFIC EXPERIENCE OR TRAINING PREFERRED: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements/preferences listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Required - High School Degree or GED · Required - Maintenance Experience (Trade School, Previous Employment, Certificates, etc.) · Required - High Competency of pneumatic and hydraulic components · Required - Knowledge of Basic Electrical / Electronic Circuits and Wiring · Required - Read and understand Mechanical Blueprints · Required - Read, Write and Comprehend English. · Required - Minimum of five years maintenance experience/preventative maintenance program facilitator. · Required - Program PLC in both Siemens and Allen Bradley format. · Preferred - Knowledge and/or skills for Metal Fabrication (Mig, Tig, Grinders, Saws, Tap-n-Die, etc.) · Preferred - Associates Degree in Related Field. · Preferred - Intermediate computer skills. · Preferred - OSHA electrical certification. · Preferred - Must have working knowledge of OSHA safety requirements. · Required - Ability to use a calculator and a tape measure. Education: High school or equivalent (Required) Experience: Industrial maintenance: 5 years (Required) Mechanical knowledge: 5 years (Required) pneumatics: 5 years (Required) Hydraulics: 5 years (Required) Electrical wiring: 5 years (Preferred)

School Support Field Technicians @Atlanta,GA *Must be Onsite all 5 days a week *Must be Open to 1099 contracts (NO W2/C2C) School Support Field Technicians are assigned to one or more schools and district locations based on student enrollment and staffing levels. Work is directed by the Lead Field Technician and IT Manager to meet operational needs. The Field Technician will collaborate closely with school leaders, administrative staff, and technology teams to ensure effective and reliable technology support. Scope of Work/Key Responsibilities: Adhere to established standard operating procedures and service level agreements through the following: Maintain exceptional customer service posture at ALL TIMES Build and maintain strong relationships with school leadership and staff (Principals, Assistant Principals, Main Office staff, School Business Managers, Media Specialists) Arrive at the school no less than 30 minutes before the first bell Monitor assigned support tickets for assigned locations; troubleshoot and resolve issues reported Work with Level 3 support and specialized Subject Matter Experts to resolve advanced technical issues. Escalate complex issues to the Lead Field Technician or IT Manager as a first point of contact Support a teaming environment with field support technicians at other schools within your assigned cluster and beyond Perform support activities, including but not limited to: o Maintain and update Chromebook carts for student use o Maintain, update, and troubleshoot interactive whiteboards, panels, and digital signage devices to ensure that they are functioning o Proactively check the status of computer labs & media center computers daily o Ensure standardized test readiness by updating laptop carts and lab equipment o Troubleshoot and/or replace Kronos hardware o Maintain and troubleshoot the location Marquee signs o Troubleshoot and resolve minor wireless and network issues o Install OS updates and patches on Apple, Chromebooks, and Windows-based PC devices o Install, configure, and support printing devices. o Maintain accurate asset assignment in Incident IQ. o Maintain clean work areas and workspaces, including MDF/IDF closets o Coordinate removal of obsolete equipment as required o Collaborate with the school's designated Technology Point of Contact (POC) to support the one-to-one student device program. o Meet with onsite vendors as required to support L3 teams o Assist with deployment of new equipment o Check monitoring tools for any school outages (wireless AP, switches, Kronos clocks) Provide support for IT projects and AV events at assigned schools Document all tickets, troubleshooting steps, and resolutions in Incident IQ for accountability, audits, and knowledge base development. Record and submit checklists or other documentation as required for upward reporting and accountability Attend mandatory monthly professional development meetings Retrieve and return parts, devices, and other items as needed from and to the APS IT Warehouse Perform other duties as assigned. Skills and Qualifications: 3+ years of work experience minimum A+ Certification REQUIRED Strong customer service skills Strong oral and written communication skills Prior experience with desk-side and break/fix support is a MUST Prior mobile device support experience: Chromebooks, iPads, mac OS, and iOS is a MUST Proficient in understanding network infrastructure and wireless support Familiarity with ticketing systems (Incident IQ) preferred Experience in an educational environment is a plus Must pass a fingerprint background check Must be authorized to work in the United States Valid driver's license and reliable personal transportation required Personal Attributes: Must be punctual, present, and visible throughout the workday Creative, curious, analytical, enthusiastic, and display strong attention to detail Ability to work independently and effectively on tight deadlines, as necessary Excellent command of the English language Exceptional customer service skills, including the ability to interact professionally with a diverse group of customers Positive and productive team player Desire to learn new skills as technology evolves Business casual attire (i.e., no sweat pants or jeans with holes; sneakers/basketball shoes allowed) Neat and clean appearance to include personal hygiene Education/Training: Minimum of an Associate degree (preferred) A+ Certification 3+ years of experience in field tech support. An equivalent combination of education and experience will be considered Best Regards. Sara RG, DRS IT Solutions, Inc 28175 Haggerty Road, Novi, MI 48377 (C) ************ EXT -4 ***********************

The Maintenance Technician maintains and repairs plant machinery, equipment, and facility systems to keep production running. This includes troubleshooting mechanical and electrical issues, completing preventive maintenance, and supporting facility upkeep. The role requires strong hands-on maintenance skills and the ability to work independently in a small, fast-paced plant. Essential Duties, Responsibilities and Accountabilities: (Include the following; however, other duties may apply.) Equipment Maintenance and Troubleshooting · Diagnose and repair mechanical and electrical issues on production equipment. · Perform preventive maintenance to reduce downtime and extend equipment life. · Complete mechanical repairs, adjustments, and equipment modifications as needed. · Respond to equipment failures and restore function as quickly as possible. Facility Maintenance · Maintain the interior and exterior of the facility, including plumbing, electrical systems, drywall, painting, and general repairs. · Assess and prioritize maintenance tasks across the property, addressing issues proactively. · Complete daily work schedules and maintenance work orders as assigned, ensuring timely and quality execution. Inventory Management · Maintain inventory of tools, equipment, and supplies necessary for maintenance activities. · Coordinate with the Maintenance Manager to ensure adequate stock levels and timely procurement of materials. Safety and Compliance · Ensure all maintenance activities comply with safety regulations and company policies. · Maintain a clean and organized work area, adhering to 5S and lean principles. · Identify and communicate potential safety hazards or concerns to the Maintenance Manager. Operational Support · Collaborate with production teams to identify and resolve maintenance needs that impact operations. · Provide technical support for facility layout improvements and new equipment installations. · Participate in special projects and other responsibilities as determined by the Maintenance Manager. Supervisory Responsibilities: This position does not have direct supervisory responsibilities but works collaboratively with team members and contractors to ensure effective maintenance operations. Qualifications: To perform this job successfully, an individual must ensure the accuracy of information and be able to multitask in a fast-paced environment. The requirements listed below are representative of the knowledge, skill, and/or ability required. Education and/or Experience: · High school diploma or GED required. · Technical certification or vocational training in industrial maintenance, mechanical repair, or electrical systems preferred. · 5-10 years of hands-on maintenance experience in a manufacturing, industrial, or similar environment. · Strong mechanical and electrical troubleshooting skills across a variety of equipment types. · Experience with general facility maintenance (plumbing, electrical, painting, repairs). Language skills: The candidate should possess excellent verbal communication skills and the ability to work collaboratively within a team. They must be able to read and interpret technical documents, including prints, production orders, safety rules, and operating and maintenance instructions, ensuring clear understanding and accurate execution of tasks. Mathematical Skills: Strong mathematical skills are essential, including the ability to perform measurements and computations required for equipment calibration and diagnostics. The candidate must also be capable of applying metric conversions and other practical mathematical concepts to real-world situations in the maintenance environment. Reasoning Ability: The candidate must demonstrate strong problem-solving and analytical skills to identify issues, collect and interpret data, and implement effective solutions. They should have the capacity to analyze technical scenarios, interpret complex instructions in mathematical or diagram form, and address both abstract and concrete variables effectively. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

PURPOSE Layout, install and repair electrical systems, apparatus, and electrical and electronic components of industrial machinery and equipment. ESSENTIAL FUNCTIONS 1. Work from MLS work orders and record labor and inventory transactions in MLS. 2. Install power supply wiring and conduit for newly installed machines and equipment such as transfer systems, balancers, robots, conveyors, and programmable controllers. 3. Install power, light electronic and control circuits and apparatus; establish secondary distribution centers, balance loads, wire complicated circuits with a large number of connections. 4. Connect power supply wires to machines and equipment, and connect cables and wires between machines and equipment 5. Diagnose malfunctioning apparatus such as transformers, motors, and lighting fixtures and replace damaged or broken wires and cables. 6. Test malfunctioning machinery; discuss with maintenance workers to diagnose malfunction. 7. Replace faulty electrical components of machine such as relays, switches, and motors, and positions sensing devices. 8. Knowledge of PLC's is a plus. 9. Diagnose and repair or replace faulty electronic components, such as printed circuit boards. 10. Plan layout of wiring and install wiring, conduit, and electrical apparatus in buildings. 11. Replace faulty mechanical, hydraulic, and pneumatic components of machines and equipment. 12. Use lift equipment as necessary to move and position parts and materials; use care to lift and balance loads properly; operate equipment in a safe manner. 13. Exercise proper care in the use of tools, equipment, and materials. 14. Complete required reports and records. 15. Detect and report faulty equipment, defective material, improper operations, and unusual conditions to supervision. 16. Observe all prescribed safety rules and regulations and maintain work area in a neat and orderly condition.

Job Title: Automotive Technician / Mechanic This brand-new state-of-the-art facility is scheduled to open in November 2025. Interviews will begin in October 2025. Compensation (Hour) Guarantees Available during initial opening. Amazing Opportunity to help create the culture and brand of one of the premiere Automotive Service Organizations in the country opening in Watkinsville, GA. Come and be part of something very special in the automotive industry. We are looking for technicians/mechanics who are energetic, upbeat, and have a positive attitude. The technicians we are looking for have to seek out solutions to tough problems with a strong passion for doing what's right for our guest. Responsibilities include, but are not limited to: Technicians use their knowledge & skills to diagnose and fix vehicles for our guest Continuously build experience as an automotive mechanic across a wide range of domestic and foreign vehicles Complete full, accurate, and honest courtesy vehicle inspections Work as part of a team to troubleshoot customer concerns quickly and effectively Follow and promote our high standards of safety, cleanliness, and organization Work closely with the service department and effectively communicate customer concerns Work together with other Technicians to solve problems, meet deadlines, and deliver distinguished results Qualifications Qualifications: Positive attitude and a desire to serve guest 3+ years of experience as an automotive technician/mechanic ASE Certifications preferred, or a plan to achieve Capable of diagnosing and repairing all makes/models of vehicles Meet or exceed hourly goals Aptitude for learning additional skills and processes Professional appearance and strong communication A desire for long-term career development Physical Requirements: Occasionally lift and/or move over 100 pounds Be able to work with tools on vehicles lifted above their head Work in tight spaces as dictated by the vehicle's needed repair Have the needed dexterity in order to efficiently use hand tools Walk/stand for the majority of their workday Drive manual transmissions vehicles Efficiently navigate a computer Additional Information Christian Brothers Automotive (CBA) began in 1982 with the simple premise of providing precision auto repair with transparency, integrity and a philosophy of people first. All 300+ CBA locations offer a modern facility equipped with manufacture-level diagnostic equipment and the latest factory scan tools. CBA shops also offer their technicians a consistent workload, free training, full-time live technician support, and access to our private Technician Assistance Center. A Personal Message from the Owner - Join Us in Building Something Great in Watkinsville After 30 years of leading large teams and building high-performing, people-first cultures in major organizations, I'm excited to bring that same passion and experience to this new chapter with Christian Brothers Automotive in Watkinsville. My mission is simple: to create a workplace where team members feel valued, supported, and inspired. I believe in helping people grow-professionally and personally-and I'm committed to fostering an environment that is positive, fun, energetic, and rewarding. If you're looking for more than just a job-if you want to be part of a team that works together toward a shared mission, where your contributions matter and your growth is a priority-then I'd love to talk with you. Christian Brothers is an exceptional organization, and we're ready to do great things in Watkinsville. Let's build something amazing together. - Owner, Christian Brothers Automotive Watkinsville Thank you for viewing this opportunity! This job posting is for an opening at a Christian Brothers Automotive location that is independently owned and operated by a local licensed franchisee. Your application and any information included with it will be submitted to the franchisee for further handling. Christian Brothers Automotive Corporation ("CBAC") is a separate business entity. No CBAC employee will be involved in any decisions regarding your employment application. If you are hired for this position, you also understand and acknowledge that the local franchisee will be your employer and that CBAC will not be your employer. The local franchisee is solely responsible for all decisions related to your employment, including hiring, firing, discipline, compensation, scheduling and supervision. All of your information will be kept confidential according to EEO guidelines. Christian Brothers Automotive is an Equal Opportunity Employer. Christian Brothers Automotive locations practice "At-will" employment practices. PandoLogic. Category:Automotive, Keywords:Automotive Technician, Location:High Shoals, GA-30645

Place Services, Inc. has an immediate need for a Lead Low Voltage Technician in Atlanta, GA. This is a traveling position around the Southeast. Who We Are: Place Services Inc. is a leading commercial construction company with our headquarters based in Canton, Georgia. Since 2006 we have grown largely due to how we view and treat our customers. We also provide our employees with a culture that allows for growth and the opportunity to learn more about construction in the local and nationwide markets. We offer our employees a competitive base salary with bonus potential, as well as medical, dental, vision, life, and accident insurance. Place Services Inc. contributes to your 401K upon your eligibility to participate in the program and offers a generous PTO program along with paid holidays. Growing from a team of 4 at inception to over 800 strong today, we assist our clients by providing them with construction excellence in service and product in every front available and needed. Our depth of client's expertise ranges from the grocery industry to big box retail as well as both state and Federal government projects in military and healthcare. What You'll Do: This candidate will focus on installing and programming Access Control, Video Surveillance, Intrusion, and Fire Alarm systems. Additional experience with Structured Cabling installation and manufacturer's certification is a plus. This position will be based out of our Canton, GA office and projects are scattered around the Southeast - travel is required. Candidate should demonstrate a strong knowledge of industry standards (BICSI, NEC, TIA/EIA) and must have a proven track record of working with all trades on construction sites in order to appropriately schedule daily activities. The candidate must be willing to work in a fast-paced team environment and interface regularly with Project Managers and Project Engineers Who You Are: Possess a diverse knowledge with a wide range of low voltage systems. Ability to lead installers and subcontractors, if in a supervisory position. The ability to obtain Security Clearances as needed for federal projects. Organize and effectively utilize technical resources, information, material, and support to assure efficient execution of all assigned tasks. Complete and submit all required task-related activity and documentation in a timely manner Troubleshooting and repairing network and controls systems Isolate and test equipment to diagnose system and wiring faults Ability to operate safely and promote a safety culture within the organization NICET Level II certification is preferred. A combination of experience and the willingness to obtain NICET certifications will be considered. Ability and willingness to perform shift or night work as required by the project What You Bring: Ability to present self in a professional manner and represent the company image Ability to read and interpret plans and specifications is required Quality-oriented & self-motivated with a “Safety First” mentality Use good judgment when making decisions Communicating in writing and with verbal clarity Competency with Microsoft software (primarily Excel, Outlook email) is a plus Ability to operate a smartphone, tablet or computer for timekeeping and labor tracking Must have a valid driver's license and pass established pre-employment screening Ability to work independently Physical Requirements: The ability to lift 50 lbs. on a regular basis The ability to transfer 100 lbs. a distance of 12 feet with the help of another person The ability to work outdoors in diverse environments The ability to ascend and descend ladders and other elevated structures Must be able to work from heights from an elevated aerial device As an EEO employer, Place Services, Inc. is committed to providing all applicants and employees with equal access to employment opportunities, regardless of sex, race, age, color, national origin, disability, pregnancy, religion, marital status, veteran status, or any other characteristic protected by federal, state, or local law.

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military

About GE Vernova GE Vernova is a planned, purpose-built global energy company that includes Power, Wind, and Electrification businesses and is supported by its accelerator businesses of Advanced Research, Consulting Services, and Financial Services. Building on over 130 years of experience tackling the world's challenges, GE Vernova is uniquely positioned to help lead the energy transition by continuing to electrify the world while simultaneously working to decarbonize it. GE Vernova helps customers power economies and deliver electricity that is vital to health, safety, security, and improved quality of life. GE Vernova is headquartered in Cambridge, Massachusetts, U.S., with more than 80,000 employees across 100+ countries around the world. GE Vernova's Gas Power business engineers advanced, efficient natural gas-powered technologies and services, along with decarbonization solutions that aim to help electrify a lower carbon future. As part of the Gas Power One Field Services team, FieldCore installs, maintains and upgrades power generation equipment, enabling operators of the world's energy infrastructure to provide more reliable and affordable energy. Job Summary The Tooling Specialty Associate I will be responsible for inventorying, inspecting, and testing of specific product line tools. Responsible for timely completion of assigned project requests. Responsible for testing, cleaning, calibration and restock of specialized tools. Will update project schedules and assign equipment as appropriate when inspections are complete and successful. Essential Duties & Responsibilities: Maintain housekeeping of warehouse to meet safety standards and follow all safety guidelines Knowledge of assigned product line tooling or discipline such as; gas productivity, technology, electrical, precision and hydraulic tooling kits, etc. Ability to read and interpret drawings, procedures, and manuals Repair, maintain, and adjust tooling Perform routine maintenance on equipment and determine maintenance needed which includes determining the proper tools and equipment necessary to complete a job. Timely completion of assembly of specialized tooling kit and sub-kits to meet tool center schedule requirements Maintain quality assurance and inventory of supplies for restocking of kits and sub-kits. Ensure kits and sub kits are delivered with no quality issues (missing parts or non-working parts) once delivered. Review returned kit and sub-kit inventory to ensure all items are accounted for as outlined in inventory system Complete visual and functional inspection to ensure all are in working condition. Clean, reorganize, and perform defined testing on all returned kits and sub-kits Must be able to utilize tooling systems in order to record inspections, restock and where applicable assign kits to specific jobs Track precision/specialty tool serial numbers for asset and certification tracking Contact and schedule vendors to perform production maintenance or calibration Review certification dates and track inbound and outbound shipments of specialty tools to vendors Must be able to manage multiple complexities and prioritize work scope based on work direction/schedule Must enter and maintain accurate records as part of daily activities - needs to be in all JDs Follow standard maintenance protocol to ensure compliance is always met. Complete required, annual safety training Ability and willingness to work holidays, weekends and overtime as required by field assignments Travel may be required May be assigned other duties to help proactively drive our FieldCore vision and align with our organization's core values. Required Qualifications & Experience: High school diploma or equivalent 1-2 years of experience with inspection of complex tooling Moderate computer knowledge and skills English Proficiency Required Desired Characteristics: Bachelor's degree Ability to troubleshoot to determine causes of operating errors and the solutions to resolve the issues. Ability to conduct tests and inspect products or processes and evaluate the quality of repairs Strong team player attitude; maintain flexibility within the changing business priorities Highly customer focused Excellent customer, communication, and interpersonal skills Strong organizational skills Ability to manage multiple priorities/tasks simultaneously and work well under pressure, in a fast-paced environment Physical Requirements (EU Excluded) Must be able to see and move throughout warehouse to resolve work problems and facilitate processes; repetitive motion activities may be involved. Frequent walking, standing, bending, kneeling, and squatting. Ability and willingness to handle repetitive weight up to 40 lbs. Compensation and Benefits: The hourly wage range for this position is $17.36 to $28.61. Employees may be eligible for overtime. FieldCore benefits include insurance (medical, dental, vision, disability, and life), retirement savings, health and Wellness reimbursement, and a bonus or incentive program. Eligibility for FieldCore benefits is determined under the terms of the applicable benefits plan. Disability, marital status, pregnancy, sexual orientation, ancestry, genetic information, gender identity, or any other characteristic protected by law. FieldCore is an equal employment opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, marital status, pregnancy, sexual orientation, ancestry, genetic information, gender identity, or any other characteristic protected by law