Engineering manager jobs in Columbus, GA - 839 jobs

CDM Smith is seeking Engineers to support Federal Construction Projects with agencies such as USACE, AFCEC, and NAVFAC. This is a pipeline requisition for future projects. The Engineering Specialist applies broad professional knowledge of engineering principles to solve complex technical challenges and ensure compliance with federal construction standards to meet specific client needs. Work is performed independently under limited supervision, requiring initiative, sound engineering judgement, and the ability to communicate effectively with a variety of stakeholders including contractors, government clients, and multidisciplinary project teams. Job Duties: - Serve as the technical liaison between federal government client design branch, construction branch, and contractors. - Review design submittals, shop drawings, specifications, RFIs, and technical reports for compliance with Federal and client specific standards. - Apply engineering principles and relevant codes across planning, investigation, design review, construction administration, , and assessment of engineering procedures, structures, systems, and tools - Monitors progress and prepares technical reports and/or project status reports. - Provide engineering judgment for field modifications, non-conformance issues, value engineering proposals, and constructability reviews. - Complies with guidelines and regulations including permitting, safety protocols, environmental requirements, etc. and delivers technical files and other technical documentation as required. - Assist in the development of cost estimates and supporting analysis in coordination with government cost estimators and contracting officers. - Participate in pre-construction meetings, progress reviews, and project closeout/punchlist activities. - Conduct or assists in quality assurance reviews to ensure compliance with contract requirements. - Develops, trains, mentors junior engineering staff while guiding technical direction and best practices. - Develop and maintain client relationships through responsive communication and strong technical support. Serves as a liaison with clients. - Performs other duties as required. \#LI-LP2 **Job Title:** Engineering Specialist (Flex Staff) **Group:** FSI ENT WFT Field **Employment Type:** Temporary **Minimum Qualifications:** - Bachelor's degree in Engineering. - At least 5 years of relevant experience. Domestic travel is required. Overseas travel is also possible. **Preferred Qualifications:** - PE (Professional Engineer) License or RA (Registered Architect) is highly preferred. - Construction Quality Management (CQM) for Contractors certificate. - OSHA 30-Hour Construction Safety. - Federal or DoD project experience (NAVFAC, USACE, or Air Force CE) is highly desirable. - Experience across vertical construction (buildings/facilities) and horizontal work (utilities, waterfronts, transportation, or airfields) - Proficiency in interpreting design documents, specifications, and Unified Facilities Guide Specifications (UFGS). - Skilled in project scheduling tools and coordination (Microsoft Project, Primavera P6) - Strong knowledge of federal contracting standards (FAR/DFARS) and Federal government design & construction processes across different divisions. **EEO Statement:** We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. **Why CDM Smith?:** Check out this video and find out why our team loves to work here! (************************************************* **Join Us! CDM Smith - where amazing career journeys unfold.** Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. **Job Site Location:** United States - Nationwide **Agency Disclaimer:** All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. **Amount of Travel Required:** 100% **Assignment Category:** Fulltime-Temporary **Visa Sponsorship Available:** No - We will not support sponsorship, i.e. H-1B or TN Visas for this position **Skills and Abilities:** - Must be a U.S. citizen. - Able to pass a federal background check. - Knowledge of design review, construction administration, cost estimating, scheduling, and contract management. - Demonstrates technical proficiency and design application knowledge. - Strong organizational skills to balance and prioritize work. - Excellent attention to detail and commitment to quality assurance. - Familiar and comfortable working on computers/tablets/phones and digital platofrms, mobile technology, and inspection/reporting software. - Strong writing and oral communication skills to work with military clients, contractors, and government teams. - Ability to work with multiple stakeholders and problem-solving skills for handling design discrepancies or construction conflicts in the field.. - Good interpersonal skills to cultivate relationships with colleagues, customers, and partners. - Ability to work independently in field settings under limited supervision. **Background Check and Drug Testing Information:** CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. **Pay Range Minimum:** $78,624.00 **Pay Range Maximum:** $157,248.00 **Additional Compensation:** All bonuses at CDM Smith are discretionary and may or may not apply to this position. **Work Location Options:** Successful candidate will be required to work 100% in the field locations. **Driver's License Requirements:** An appropriate and valid driver's license is required. **Seeking candidates for a potential future opportunity!:** We are looking for qualified candidates for this position in anticipation of future project opportunities. Please note this is an "Evergreen" position which will be used to build our candidate pool but is not a role that is open at this time. If you are interested in being considered for this position should this position become available, we encourage you to apply to be part of our talent community. By having your information on file, we can reach out to you when this or a similar role officially opens. **Massachusetts Applicants:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

*Employment Type:* Full time *Shift:* Day Shift *Description:* Performs procedures to ensure surroundings conducive to patient well-being, to maintain continuous service of environmental control equipment, facilities, systems/equipment and utilities and to ensure safe and economical operation. Ensures compliance with applicable policies/procedures, standards and regulations. Coordinates construction, renovation and installation activities.*Position Requirements*: *Education:* Undergraduate degree in engineering or equivalent experience in skilled trades is preferred. *Experience:* 3-5 years of supervisory experience, preferably in a hospital environment. 3-5 years experience in Engineering or related field preferred. Must have experience in construction, renovation, and installation coordination. *Our Commitment * Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Job ID 239140 Posted 23-Sep-2025 Service line GWS Segment Role type Full-time Areas of Interest Data Centers, Facilities Management, Health and Safety/Environment Transition Engineering and QHSE Manager GJA ID: ZP0022 (Transition Manager) Location: Remote (U.S. Based) **About the Role** : As the Transition Engineering and QHSE Manager (TEQ Manager) at CBRE Data Center Solutions, you will play a pivotal role in seamlessly integrating new and existing data center clients. You will leverage your deep expertise in electrical, mechanical, and fire protection systems, as well as QHSE best practices, to provide technical leadership during transitions. This includes conducting site audits, developing risk assessments, ensuring compliance, and delivering training. Working closely with the Transition Manager, you will contribute to all aspects of the transition process, ensuring its success through effective project management, clear communication, and proactive client engagement. Your engineering foundation, QHSE knowledge, and ability to build strong client relationships are essential to delivering a positive and successful transition experience. **Essential Duties and Responsibilities** As the Transition Engineering and QHSE Manager (TEQ Manager), you will play a critical role in the successful and seamless transition of new data center sites into the CBRE Data Center Solutions portfolio. Your key responsibilities during the initial transition phase will include: 1. Due Diligence and Assessment: -QHSE Due Diligence: Lead QHSE due diligence assessments to identify potential risks and compliance gaps during the initial site transition, ensuring a smooth and safe handover to CBRE operations. -Technical Assessment: Develop and implement initial risk assessments for the site, resulting in a proactive approach to hazard identification and mitigation. -Client Contract Review: Review and analyze existing site documentation, including critical infrastructure drawings, operating procedures, and emergency response plans, to ensure alignment with CBRE standards and best practices. -Asset Validation: Perform a thorough validation of critical infrastructure assets, confirming their existence, operational status, condition, and alignment with site documentation. 2. Documentation and System Review: -Documentation Review: Review existing site documentation, including: Critical infrastructure drawings and documentation. Operating procedures (EOPs, SOPs, MOPs). Emergency response plans. Maintenance records. Risk assessments and registers. Chemical inventories and Safety Data Sheets (SDS). -Data Collection and Integration: Collect and integrate relevant site data into CBRE's systems (SharePoint, Harbour, Quantum, etc.). -Critical Spares Inventory: Review the existing critical spares inventory and recommend necessary adjustments. -Playbook: Develop, complete, and implement transition playbooks. 3. Risk Management and Mitigation: -Risk Assessment Development: Develop and implement initial risk assessments and risk profiles for the site. -Gap Analysis: Identify gaps between the site's current state and CBRE's QHSE and operational standards. -Transition Plan Development: Contribute to the development of a comprehensive transition plan that addresses identified risks and gaps. 4. Training and Onboarding: -Initial Training Needs Assessment: Assess the training needs of existing site personnel. -Onboarding Support: Support the onboarding of new CBRE personnel to the site, including QHSE and technical training. 5. Initial Program Implementation: -Management of Change (MOC) Implementation: Implement CBRE's Management of Change (MOC) process. -Incident Reporting Process: Establish incident reporting procedures and ensure site personnel are trained on these procedures. -Chemical Management: Implement initial chemical management procedures, including SDS access and proper storage. 6. Communication and Coordination: -Stakeholder Communication: Communicate effectively with the client, site personnel, and CBRE transition team members. -Transition Meetings: Participate in transition meetings to track progress and address issues. -Hand-off to Ongoing Operations: The goal is to establish a solid foundation for ongoing operations, with a clear hand-off to the site operations team once the transition is complete. 7. Additional Responsibilities: -Assessing asset condition and contributing to capital planning to prioritize infrastructure upgrades, replacements, and lifecycle investments. -Developing and implementing sustainability strategies to improve energy efficiency (e.g., reducing Power Usage Effectiveness [PUE]), water usage effectiveness (WUE). -Coordinating with vendors and contractors to ensure compliance with service agreements and operational standards. -Willingness to travel 20-25% of the time to support site operations, client meetings, or critical incident response as needed. Important Considerations for this List: -Focus on "Getting Started": This list emphasizes the immediate actions needed during the initial transition. -Prioritization: The order reflects a logical flow - from assessment and review to planning and initial implementation. -Adaptability: Each transition is unique, so this list should be adapted based on the specific requirements of the site and client. Knowledge Operation, maintenance, and repair of data center critical infrastructure, including: -Standby generators, UPS systems, Power Distribution Units (PDUs), and Automatic Transfer Switches (ATSs). -Air-cooled and water-cooled chilled water plants and distribution systems. -Computer Room Air Handlers (CRAHs) and Air Conditioners (CRACs). -Water treatment and filtration systems. -Building Management Systems (BMS), Electrical Power Monitoring Systems (EPMS), Computerized Maintenance Management Systems (CMMS), and Data Center Information Management systems (DCIM). Engineering Knowledge of: -Psychrometric charts, HVAC load calculations, and hydronic pipe sizing. -Reading electrical one-lines, chilled, and condenser water diagrams. -Standard sequences of operation for electrical and mechanical data center systems. -Electrical power calculations per NFPA 70 (NEC), coordination, arc-flash studies (NFPA 70E), and maintenance practices (NFPA 70B). -Industry standards, including ASHRAE Datacom/TC 9.9 and OCP publications. -Principles of preventative, predictive, and reactive maintenance. -Energy efficiency metrics (e.g., PUE, WUE) and sustainable data center practices. Skills -Proficient in Microsoft Office Suite (Word, Excel, Outlook, PowerPoint, Teams) and Microsoft Power BI for data analysis and reporting. -Proficient in Bluebeam, CAD, and BIM software for technical documentation. -Excellent written and verbal communication skills, including the ability to present technical information to both technical and non-technical audiences. -Strong analytical and problem-solving skills, with the ability to identify root causes and develop effective solutions. -Project Management experience. Excellent customer service skills. Talents -Analytical: Objective in identifying patterns and root causes through systematic analysis. -Adaptable: Thrives in dynamic environments, managing multiple priorities effectively. -Focused: Maintains clear objectives and filters actions to achieve goals. -Responsible: Takes ownership of commitments and delivers results reliably. **Qualifications** -A bachelor's degree in mechanical, electrical, QHSE, or related field is preferred -Professional Engineering License is a plus. -Health and Safety Certifications are a plus -Three to five years of experience in the data center industry, with a focus on design and/or operations, QHSE. CBRE carefully considers multiple factors to determine compensation, including a candidate's education, training, and experience. The minimum salary for the Transition Engineering and QHSE Manager position is $130,000 annually and the maximum salary of $150,000 annually . The compensation offered to a successful candidate will depend on their skills, qualifications,and experience. This role will provide the following benefits: 401(K), Dental insurance, Health insurance, Life insurance, and Vision insurance **Equal Employment Opportunity:** CBRE has a long-standing commitment to providing equal employment opportunity to all qualified applicants regardless of race, color, religion, national origin, sex, sexual orientation, gender identity, pregnancy, age, citizenship, marital status, disability, veteran status, political belief, or any other basis protected by applicable law. **Candidate Accommodations:** CBRE values the differences of all current and prospective employees and recognizes how every employee contributes to our company's success. CBRE provides reasonable accommodations in job application procedures for individuals with disabilities. If you require assistance due to a disability in the application or recruitment process, please submit a request via email at recruitingaccommodations@cbre.com or via telephone at *************** (U.S.) and *************** (Canada). CBRE, Inc. is an Equal Opportunity and Affirmative Action Employer (Women/Minorities/Persons with Disabilities/US Veterans)

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman Defense Systems is seeking an **Electromagnetic Environmental Effects (E3) System Engineering Manager 2.** This leadership role will be located in **Huntsville, AL** and will support the Sentinel program. This E3 Manager reports to the Sentinel Electromagnetic Environmental Effects (E3) Senior Manager. **What you will get to do:** The E3 Manager will provide personnel support to the E3 Team and will have responsibility for the quality and technical execution of engineers. This position is a combination of hands-on management of engineering activities and personnel development and mentoring. This role works closely with program leadership, the technical leaders, and functional subject matter experts within the E3 Team. This position requires experience in technical work and knowledge, and experience with leading technical teams over a broad range of tasks including design, implementation, test, verification, reporting and scheduling. The successful candidate must have the ability to lead teams in a fluid environment that requires teamwork with our Customer, NGC teams and suppliers to meet program objectives. A high degree of skill in critical decision making is imperative to perform in this environment. A working knowledge of ground-based deterrence systems is desirable. Responsibilities include: - Tracking EMI and TEMPEST tests across IPTs and working with E3 test leads to develop schedules and manage resources. Lead a team to execute a test program on time and within budget. - Earned Value Management of multiple E3 and TEMPEST Work Packages - directly supporting the CAM with resource forecasting, planning, and reporting. - Manage the on time development and delivery of E3 and TEMPEST CDRLS - ensuring the high technical rigor standards are met for each product delivery. - Communicate effectively and report regular status to Program Managers, IPT Management, and customer. - Develop and support consistent execution of standard practices, best practices, methods, software and tools across programs. Implement lessons learned, standard practices, best practices, and continuous improvement plans. Lead projects and plans to improve technology, strategic capability, overall design, analysis and production capacity. - Coordinate with programs for staffing, recruiting, training, preparing and delivering performance evaluations to employees, evaluating/recommending employees for promotions, evaluating salaries and coordinating with Human Resources on potential adjustments, assisting employees in preparing performance goals, providing career guidance to employees and counseling employees on their performance as necessary. - Manage and forecast engineering resources in collaboration with engineering management and technical leaders. - Work with the program E3 Senior Manager and Technical Leads in establishing personal program and functional goals and perform performance evaluations and merit adjustments for subordinates. Provide personnel with career development, employee engagement, mentoring and coaching. - The selected candidate should thrive working in a fast-paced work environment with high expectations, engaged in significantly diverse assignments, within a collaborative/team setting across all levels of the organization. **Position Benefits:** As a full-time employee of Northrop Grumman, you are eligible for our robust benefits package including: - Medical, Dental & Vision coverage - 401k - Educational Assistance - Life Insurance - Employee Assistance Programs & Work/Life Solutions - Paid Time Off - Health & Wellness Resources - Employee Discounts This positions standard work schedule is a 9/80. The 9/80 schedule allows employees who work a nine-hour day Monday through Thursday to take every other Friday off. **You'll Bring These Qualifications:** + Bachelor's degree in STEM (Science, Technology, Engineering, or Mathematics) and a minimum of 8 years of related experience; Master's Degree in STEM and a minimum of 6 years of related experience + Must have an active U.S. Government DoD Secret security clearance at time of application with an ability to obtain and maintain Special Access Program (SAP) approval within a reasonable period of time, as determined by the company to meet its business need. + 1+ years of experience with Electromagnetics or TEMPEST design, test, analysis or related skills. **These Qualifications Would be Nice to Have:** + Formal management experience to include performance review for direct reports + 3+ years of experience as a DoD (or equivalent) contractor. + Experience with managing/scheduling complex technical efforts + Prior experience leading 10+ person teams + 1 year of engineering experience in at least one of the Specialty Engineering disciplines + Strong communication, interpersonal skills and experiences presenting to both internal and customer audiences + Experience with the Atlassian Tool Suite, IBM DOORS, + Earned Value Management (EVM) experience or CAM training + Excellent communication, mentoring, interpersonal skills, and ability to interface with senior management, peers, and employees + Ability to deal with ambiguity and to meet program commitments in a highly concurrent engineering environment Primary Level Salary Range: $153,800.00 - $230,800.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

**Country:** United States of America , Midland, GA, 31820 USA ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance:** None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. Are you ready to go beyond? The **Associate Director, Manufacturing Engineering** serves as the strategic and technical leader responsible for the full manufacturing engineering value stream, including product engineering, process engineering, programming engineering, and new product introduction (NPI). This leader will architect and execute the long‑term manufacturing technology roadmap, ensure flawless product industrialization, and deliver high‑quality hardware with minimal defects. The role is accountable for driving engineering excellence, advancing manufacturing capability, and enabling predictable, competitive, and scalable production performance across the factory. **What You Will Do:** Strategic Leadership & Technical Governance + Set the long‑term vision and strategy for Manufacturing Engineering, ensuring alignment with business objectives, customer requirements, and enterprise standards. + Lead and integrate Product Engineering, Process Engineering, and Programming Engineering into a cohesive, high‑performing organization that delivers robust, defect‑free products. + Own the technical governance framework, including design‑for‑manufacture (DFM), process capability, tooling strategy, and manufacturing readiness. + Drive standardization of manufacturing methods, equipment, and technologies across product families to improve quality, cost, and delivery performance. New Product Introduction (NPI) Excellence + Lead end‑to‑end NPI execution, ensuring new products are industrialized with world‑class quality, stable processes, and predictable ramp‑up performance. + Oversee manufacturing readiness reviews, process validation, and capability qualification to ensure flawless launch and minimal early‑life defects. + Partner with Design Engineering to influence product architecture, manufacturability, and cost from concept through production release. Process Capability, Quality, and Performance + Ensure manufacturing processes consistently deliver high‑quality hardware with extremely low defect rates, leveraging advanced problem‑solving and statistical methods. + Oversee PFMEA, control plans, and process capability (Cp/Cpk) development to proactively mitigate risk and ensure robust process performance. + Drive continuous improvement in cycle time, yield, labor standards, and cost performance across all product families. + Govern MRB strategy and systemic corrective actions to eliminate recurring defects and strengthen process discipline. Technology Advancement & Automation + Develop and execute the manufacturing technology roadmap, including automation, digital manufacturing, advanced inspection, and next‑generation machining strategies. + Lead capital planning and deployment to ensure investments align with long‑term capability needs and factory competitiveness. + Champion technology insertion initiatives that improve quality, reduce variation, and enhance operational efficiency. Organizational Leadership + Lead, mentor, and develop a multi‑disciplinary engineering organization, building deep technical capability and strong leadership bench strength. + Create a culture of accountability, innovation, and engineering rigor, ensuring teams are empowered to solve complex problems and deliver exceptional results. + Set clear priorities, allocate resources effectively, and ensure alignment across engineering, operations, quality, supply chain, and program teams. + Serve as a key member of the site leadership team, influencing strategy, driving transformation, and shaping the future of the factory. **Qualifications You Must Have:** + Bachelor's degree in a STEM field and 12 or more years of experience in manufacturing engineering, product engineering or technical operations within a complex, high‑precision production environment OR a Master's degree and 10 or more years of experience in manufacturing engineering, product engineering, or technical operations within a complex, high‑precision production environment + Demonstrated success leading multi‑disciplinary engineering teams and delivering high‑quality products with minimal defects. + Proven leadership of NPI programs, manufacturing readiness, and process validation. + Expertise in PFMEA, process capability, DFM, and advanced problem‑solving methodologies. + Experience with machining, assembly, special processes, or complex aerospace hardware manufacturing. + Proficiency with manufacturing systems (MES, ERP, PLM) and data‑driven engineering tools. **Qualifications We Prefer:** + Master's degree in Engineering or a related technical discipline. + Experience in aerospace, defense, or other highly regulated, high‑precision manufacturing environments. + Background in automation, digital manufacturing, advanced machining, or next‑generation manufacturing technologies. + Lean, Six Sigma, or CORE certification (Black Belt or equivalent). + Experience leading capital strategy, technology roadmaps, and large‑scale transformation **Learn More & Apply Now** In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: **Onsite:** Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. _Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility._ **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** The salary range for this role is 157,200 USD - 298,800 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Your work days are brighter here. We're obsessed with making hard work pay off, for our people, our customers, and the world around us. As a Fortune 500 company and a leading AI platform for managing people, money, and agents, we're shaping the future of work so teams can reach their potential and focus on what matters most. The minute you join, you'll feel it. Not just in the products we build, but in how we show up for each other. Our culture is rooted in integrity, empathy, and shared enthusiasm. We're in this together, tackling big challenges with bold ideas and genuine care. We look for curious minds and courageous collaborators who bring sun-drenched optimism and drive. Whether you're building smarter solutions, supporting customers, or creating a space where everyone belongs, you'll do meaningful work with Workmates who've got your back. In return, we'll give you the trust to take risks, the tools to grow, the skills to develop and the support of a company invested in you for the long haul. So, if you want to inspire a brighter work day for everyone, including yourself, you've found a match in Workday, and we hope to be a match for you too. About the Team The Incident Management and Service Engineering team within Workday's Product and Technology organization handles critical incidents, internal communications, and large-scale customer-impacting events. Our goal is to drive exceptional operational outcomes! The team enhances the overall customer experience by taking ownership of critical issues, enabling prompt resolutions, and resolving root causes. About the Role As part of the (IMSE) team, you will lead widespread incidents that impact our customers. We are a global 24/7 operating team, responsible for ensuring the appropriate business and technology leaders and their teams are engaged to restore disrupted services. This role provides broad exposure to all facets of Workday services and architecture, deepening your understanding of the Workday ecosystem, including both on-premise and cloud-based solutions. Every day will bring new and exciting opportunities that include: Leading major incident response and working towards resolution. Providing concise and timely communication on developing and progressing issues to Workday's Support Teams, and internal collaborators including senior leadership. Working to improve relevant metrics such as ‘mean time to detect' and ‘mean time to resolve' for all incident types. Facilitating Root Cause Analysis and Post Event Reviews after each incident to minimize recurrence. Collaborating with key partners across Workday as advocates on behalf of customers to drive improvements in their experience and develop mechanisms that support and improve E2M's ability to deliver on that objective. Facilitating post mortems of operational failures, implementing corrective actions and identifying improvement opportunities for existing processes. Analyzing and Communicating data trends across a variety of sources to identify potential issues. This role will support one or more direct or indirect contracts with the U.S. Federal Government which, due to federal government security requirements, mandates that all Workday personnel working on the contracts be United States citizens (naturalized or native). About You We are seeking a highly motivated and experienced individual who thrives in a fast-paced environment. You possess exceptional leadership skills and remain calm under pressure, making sound decisions in critical situations. You are passionate about advocating for our customers! Key traits we are looking for: Strong Incident Command: Demonstrates the ability to take charge during incidents, providing clear and crucial direction to multi-functional teams. Confident decision-making in high-pressure situations minimizes disruption and ensures successful incident resolution. Superb Communication: Effectively communicates complex technical information to both technical and non-technical audiences, ensuring everyone is advised and aligned. Problem-Solving: Skilled problem-solver, capable of quickly assessing situations and implementing effective solutions. Leadership and Delegation: Effectively leads and delegates tasks, ensuring everyone understands their responsibilities and is held accountable for their contributions. Basic Qualifications: Applicants should have relevant tertiary qualifications (Information Systems / IT / Business Analyst / Engineering / similar) in addition to: 5+ years of experience in Support Engineering, Incident Commander, Customer Escalations, Technical Communications, or in a Technical Operations/Support role 3+ years experience as an incident commander and incident management. Established history of optimally leading issues through resolution and priority management at both the service owners and executive levels. Preferred Qualifications: 3+ years of direct experience leading high-priority incidents in a fast-paced environment. Industry practices related to Service Management and Lifecycle; ITIL/IT Service Management methodology. Ability to review complex technical details regarding ongoing issues/events and convey the key. details to senior partners, including recommendations, to facilitate real-time decision making. Familiarity with Cloud services with a focus on high availability and fault tolerant design a plus Knowledge of ITIL/Lean Processes. Excellent technical writing and communication. #LI-JH1 Workday Pay Transparency Statement The annualized base salary ranges for the primary location and any additional locations are listed below. Workday pay ranges vary based on work location. As a part of the total compensation package, this role may be eligible for the Workday Bonus Plan or a role-specific commission/bonus, as well as annual refresh stock grants. Recruiters can share more detail during the hiring process. Each candidate's compensation offer will be based on multiple factors including, but not limited to, geography, experience, skills, job duties, and business need, among other things. For more information regarding Workday's comprehensive benefits, please click here. Primary Location: USA.GA.Atlanta Primary Location Base Pay Range: $95,200 USD - $142,800 USD Additional US Location(s) Base Pay Range: $90,400 USD - $171,400 USD Our Approach to Flexible Work With Flex Work, we're combining the best of both worlds: in-person time and remote. Our approach enables our teams to deepen connections, maintain a strong community, and do their best work. We know that flexibility can take shape in many ways, so rather than a number of required days in-office each week, we simply spend at least half (50%) of our time each quarter in the office or in the field with our customers, prospects, and partners (depending on role). This means you'll have the freedom to create a flexible schedule that caters to your business, team, and personal needs, while being intentional to make the most of time spent together. Those in our remote "home office" roles also have the opportunity to come together in our offices for important moments that matter. Pursuant to applicable Fair Chance law, Workday will consider for employment qualified applicants with arrest and conviction records. Workday is an Equal Opportunity Employer including individuals with disabilities and protected veterans. At Workday, we are committed to providing an accessible and inclusive hiring experience where all candidates can fully demonstrate their skills. If you require assistance or an accommodation at any point, please email accommodations@workday.com. Are you being referred to one of our roles? If so, ask your connection at Workday about our Employee Referral process! At Workday, we value our candidates' privacy and data security. Workday will never ask candidates to apply to jobs through websites that are not Workday Careers. Please be aware of sites that may ask for you to input your data in connection with a job posting that appears to be from Workday but is not. In addition, Workday will never ask candidates to pay a recruiting fee, or pay for consulting or coaching services, in order to apply for a job at Workday.

**Who We Are** At Kyndryl, we design, build, manage and modernize the mission-critical technology systems that the world depends on every day. So why work at Kyndryl? We are always moving forward - always pushing ourselves to go further in our efforts to build a more equitable, inclusive world for our employees, our customers and our communities. **The Role** Kyndryl Consult is the fastest growing business within the organization and instrumental to the company's strategic growth objectives. You will play a key leadership role across multi-disciplinary teams, guiding them through complex consulting engagements and be responsible for creating and positioning strategic change agendas within Kyndryl's largest accounts across the C-suite, spanning the intersection between complex Business and IT customer solutions, transformations that impact across the entire customer Eco-system. This role is focused on delivering digital modernization through Digital Workplace Services (DWS), helping Kyndryl's M&E (Manufacturing and Engineering) clientele enhance their internal employee experience, workforce agility, collaboration, and overall digital experience. As a Consult Partner, you will have a pivotal role in driving profitable growth, leveraging our comprehensive capabilities to build strong client relationships, and leading your team to success. This role demands a strong presence, industry expertise, and the ability to cultivate relationships with CXO-level clients. Your leadership will be critical in fostering talent development and innovation within the organization. This role will also be leading the overall client engagement and delivering high quality client work alongside senior client stakeholders. Working in a transaction environment which may be pre or post deal, planning post deal implementation, and ultimately supporting execution. Partners will be focused on financial impact, utilization and contribution, client impact and leadership. **Contribute to Profitable Growth:** + Drive significant financial outcomes through signings and revenue targets + Ensure sustained growth and profitability, managing margin expectations and backlog growth + Support the identification, pursuit and conversion of a pipeline of business development opportunities + Undertake scoping and fee negotiation on engagements, while enduring profitability and understanding and containing risk + Apply consultative judgment to accurately scope work, negotiate fees, and draft Statements of Work (SOWs) that align with client needs and enable rapid delivery. + Leverage a proven track record of consulting and selling digital workplace services, managing large client portfolios and driving revenue growth. **Client Engagement:** + Build and maintain deep relationships with client CXOs and be seen as the 'go to' person and a trusted advisor by senior executives + Leading C-level client interactions and consulting initiatives, deliverables and outputs of a deal engagement + Demonstrate credibility and experience to advise and deliver on complex consulting engagement + Enhance client satisfaction, as measured by Net Promoter Score (NPS) and new relationship development; Secure client references + Demonstrate a deep understanding of discovery, design, and deployment processes to guide clients through digital workplace transformations. + Anticipate and articulate future challenges in digital workplace services, including those driven by Copilot, agentic AI, and evolving office models, to position Kyndryl as a strategic partner. + Bring consulting experience-preferably in the Technology, Media and Telecommunications space-to tailor engagements that resonate with industry-specific needs and priorities. **Operational Excellence:** + Achieve individual and team utilization targets + Lead the design of complex engagements and take responsibility for oversight of delivery, ensuring high performance and customer satisfaction Leadership, Management, People + Lead by example; Fostering a culture of continuous personal and professional development and challenging our people to be curious and innovative and supportive for each other. At the same time ensuring that all outcomes are commercially focused, value adding and effectively executed **Strategic Contribution:** + Drive Kyndryl's delivery capability with new and existing clients by leading DWS-focused transformation programs, services and implementations centered on Collaboration, Virtualization, Contact Center, Employee Experience, and related DWS offerings. + Utilize industry and technology expertise to shape and drive the company's strategic initiatives. + Align with Kyndryl's strategic vision and contribute to its execution. + Drive external eminence and innovation, establishing a strong personal and organizational brand in the industry. + Proactively develop thought leadership and intellectual capital Kyndryl currently does not require employees to be fully vaccinated against COVID-19, however, if you are hired to work at a client, customer, or partner location, you may be required to show proof of vaccination to align with their respective COVID-19 vaccination policies. Those who believe they are eligible may apply for a medical or religious accommodation prior to the start of employment. **Who You Are** Who You Are You're good at what you do and possess the required experience to prove it. However, equally as important - you have a growth mindset; keen to drive your own personal and professional development. You are customer-focused - someone who prioritizes customer success in their work. And finally, you're open and borderless - naturally inclusive in how you work with others. Required Skills and Experience + Candidates with consultative expertise to articulate Digital Workplace challenges and advise on strategies addressing trends like Copilot, Agentic AI, and the future of work are strongly encouraged to apply + Experience in discovery, design, and deployment of Digital Workplace solutions using technologies including, but not limited to Microsoft M365, Intune, AVD, Copilot, Viva, ServiceNow ITSM, DEX Platforms, Amazon Connect, and Google Suite strongly preferred. + Extensive experience in client engagement and relationship management at the CXO level + Demonstrable ability to build and commercialize relationships with senior executives + Proven track record of leading and executing complex projects with multi-disciplinary teams in a consulting, corporate or public sector environment + Expertise in mergers and acquisitions (M&A) integration within the Digital Workplace context would be a plus + Effective financial acumen with experience in driving revenue growth and managing margins + Experience of managing or supporting high-value business development activities with senior stakeholders + Deep understanding of industry trends in the Manufacturing or Engineering industries + Sound personal brand and presence in the M&E industrial space + Demonstrated ability to innovate and drive change **The compensation range for the position in the U.S. is $159,240 to $286,560 based on a full-time schedule. Your actual compensation may vary depending on your geography, job-related skills and experience. For part time roles, the compensation will be adjusted appropriately. The pay or salary range will not be below any applicable state, city or local minimum wage requirement. There is a different applicable compensation range for the following work locations:** **California: $175,080 to $343,920** **Colorado: $159,240 to $286,560** **New York City: $191,040 to $343,920** **Washington: $175,080 to $315,240** **Washington DC: $175,080 to $315,240** **This position will be eligible for Kyndryl's discretionary annual bonus program, based on performance and subject to the terms of Kyndryl's applicable plans. You may also receive a comprehensive benefits package which includes medical and dental coverage, disability, retirement benefits, paid leave, and paid time off. Note: If this is a sales commission eligible role, you will be eligible to participate in a sales commission plan in lieu of the annual discretionary bonus program. Applications will be accepted on a rolling basis.** **Being You** Diversity is a whole lot more than what we look like or where we come from, it's how we think and who we are. We welcome people of all cultures, backgrounds, and experiences. But we're not doing it single-handily: Our Kyndryl Inclusion Networks are only one of many ways we create a workplace where all Kyndryls can find and provide support and advice. This dedication to welcoming everyone into our company means that Kyndryl gives you - and everyone next to you - the ability to bring your whole self to work, individually and collectively, and support the activation of our equitable culture. That's the Kyndryl Way. **What You Can Expect** With state-of-the-art resources and Fortune 100 clients, every day is an opportunity to innovate, build new capabilities, new relationships, new processes, and new value. Kyndryl cares about your well-being and prides itself on offering benefits that give you choice, reflect the diversity of our employees and support you and your family through the moments that matter - wherever you are in your life journey. Our employee learning programs give you access to the best learning in the industry to receive certifications, including Microsoft, Google, Amazon, Skillsoft, and many more. Through our company-wide volunteering and giving platform, you can donate, start fundraisers, volunteer, and search over 2 million non-profit organizations. At Kyndryl, we invest heavily in you, we want you to succeed so that together, we will all succeed. **Get Referred!** If you know someone that works at Kyndryl, when asked 'How Did You Hear About Us' during the application process, select 'Employee Referral' and enter your contact's Kyndryl email address. Kyndryl is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, pregnancy, disability, age, veteran status, or other characteristics. Kyndryl is also committed to compliance with all fair employment practices regarding citizenship and immigration status.

Pay Range: $68-78 ph (W2) Duration: Direct Reporting to Manager, Test Engineering, this position will plan, organize and technically direct test engineering and operations activities and staff. Types of tests consist of static rocket motor firings, direct-connect ramjet/scramjet testing, altitude simulation test firings, case proof and burst pressure testing, case structural loads testing, aero-heat material testing, and dynamic/environmental testing. The Test Engineering Manager is responsible for providing engineering analysis and oversight of product test requirements and performance in a safe, environmentally sound, secure, cost effective and timely manner; planning and conducting of all testing including proposal, test procedure, test plan preparation, test conduct and data review; critical reviews to assure that designs, tests and experiments are properly performed to attain test objectives; and maintaining functional integrity in the verification of hardware and/or software performance. In this role, you will function as an advisor on all projects and tasks assigned to the organizational group and results are typically accomplished through experienced, exempt employees. The Test Engineers under your supervision may either be Electrical, Instrumentation, and Control Test Engineers or Mechanical Test Engineers, depending on your expertise/qualifications. - Electrical, Instrumentation, & Control (ICE) Engineers are responsible for providing technical and operational support for test activities, including selection, procurement, calibration, and installation of instrumentation; planning, integration and operational support of special electrical test equipment; development, implementation, and maintenance of facility and test article control software and hardware. - Mechanical Test Engineers engineers work with customers, program managers and project engineers to define test objectives and identify and select test methods and instrumentation. They then create plans and procedures for safely conducting these tests, utilizing our existing four test facilities and equipment, and/or designing new tools or techniques. This current opening may be filled at this level as posted or at one level higher. Skills: Provide assistance to direct reports in meeting established schedules and to resolve complex technical or operational problems, and supervise engineering or analysis activities, developing new concepts, methods or technologies. Provide direction to direct report engineering staff based on general policies and management guidance, recommend modifications to operating policies and interpret and execute policies that typically affect direct report organizational groups. Education: Requires a Bachelor's degree in an appropriate discipline and nine (9) years of progressively responsible experience in a directly related field, or an equivalent combination of education and experience. Must have demonstrated leadership skills, including the ability to plan, organize, coordinate, direct and control the activities of the assigned organization. Must have experience in one or multiple areas of Electrical, Instrumentation, and Control Test Engineers or Mechanical Test Engineering.

Job Purpose: Production Engineering Manager (HOP) is responsible for improving productivity and profit at plant and drive quality improvement through root cause analysis, ensure products are manufactured in compliance with customer specifications, safety standards and design specifications. Responsibilities include the following (other duties may be assigned as needed): Leading Production Engineering team members as HOP and coordinate tasks with relevant team in the organization Communicate with Global Production Engineering HQ in Korea as a counterpart and lead the tasks directed by GPE team. Implementation of processes including equipment procurement, coordination of installation, process Capability prove-out, training, process documentation and production start-up. Contribute to the product introduction process with respect to cost estimation, process investigation, schedule development, product validation and product validation testing. Maintain and modify machines for new generation vehicle. Review production problems as they are identified on regular basis and implement solutions. Work closely with Manufacturing Engineers, Production Manager and other departments to implement processes and equipment. Work closely with maintenance team to troubleshoot machine problems and develop PM programs. Work closely with production and production quality team to ensure that target production and quality goal is achieved. Qualifications: BS degree in mechanical engineering or related majors. Minimum 7 years of automotive industry experience is required. IATF quality system knowledge is required. Tooling and fixture design experience preferred. Experience with robotics and industrial controls preferred. Bilingual language (Korean) preferred. Technical Competencies: Mandatory skill of drawing interpretation, jig & fixture design & pneumatic system understanding. 6 Sigma, Mini-tap experience preferred. Be proficient in MS Office, Auto-Cad. - Ability to read and interpret blueprints and work instructions. Non-Technical Competencies: Interpersonal Skills (relationship building, teamwork, conflict resolution, customer orientation). Communication (Verbal communication, listening, written communication). Performance Skills (accuracy with detail, planning and organizing, efficiency). Personal Characteristic (motivation and commitment, flexibility, assertiveness, development orientation). Legal Requirements: Must be at least 18 years of age due to federal labor law requirements. Must be legally authorized to work in the United States. Supervisory Responsibility: None. Remote Work: Not Eligible for Hybrid/Remote Work Compensation & Benefits: Competitive Salary commensurate with experience. Comprehensive benefits package that include: Medical, dental & vision insurance coverage Company-paid life and disability insurance and other Guardian supplemental benefits 401 (k) retirement savings plan with company match Paid time off (PTO) and company-recognized holidays Employee Assistance Program (EAP) Tuition reimbursement and professional development opportunities Equal Opportunity Employer Statement: HL Mando is an equal opportunity employer and value diversity in our workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, or disability status.

Schedule: Hybrid remote/onsite 2 -3 days per week Compensation: $160k -$190k Salary DOE Qualifications: Bachelor's degree in Accounting and Finance 7+ years of progressive experience in R&D Proven experience in project and budget management. Strong leadership and team management skills with a track record of delivering innovative solutions. Exceptional communication, collaboration, and stakeholder engagement abilities. Familiarity with emerging technologies relevant to accounting (e.g., AI, data analytics, blockchain, automation) is highly desirable. CPA or relevant professional designation is a plus. Benefits: 100% paid for Healthcare Coverage, Unlimited PTO, 401k & Roth option, Travel Bonus, CPA reimbursement and bonus, Paid Parental Leave, Bonus Programs. Requirements Bachelor's degree in Accounting and Finance 7+ years of progressive experience in R&D Proven experience in project and budget management. Strong leadership and team management skills with a track record of delivering innovative solutions. Exceptional communication, collaboration, and stakeholder engagement abilities. Familiarity with emerging technologies relevant to accounting (e.g., AI, data analytics, blockchain, automation) is highly desirable. CPA or relevant professional designation is a plus. Benefits100% paid for Healthcare Coverage, Unlimited PTO, 401k & Roth option, Travel Bonus, CPA reimbursement and bonus, Paid Parental Leave, Bonus Programs.

Responsibilities Project Planning and Execution: - Collaborate with project managers to define project goals, timelines, and deliverables, ensuring alignment with client requirements and overall business objectives; - Oversee the engineering project lifecycle, including design, development, testing, and implementation, while managing resources effectively; - Review contract documents to ensure all deliverables and obligations associated with the scope of work are fully understood and identified; - Review work hour estimate for the project and ensure budget and schedule are adhered to; - Monitor project progress, identify and mitigate risks, and resolve any issues or bottlenecks that may impact project timelines or quality. Technical Expertise and Quality Assurance: - Provide technical guidance and expertise to the engineering team, ensuring the use of industry best practices and standards; - Conduct regular reviews and quality assessments of engineering deliverables, ensuring compliance with project requirements, specifications, and quality standards; - Promote continuous improvement initiatives to enhance engineering processes, methodologies, and tools, driving efficiency and productivity; - Actively act in the role of Engineering Manager on a major project. Stakeholder Collaboration: - Collaborate closely with internal and external stakeholders, including clients, architects, engineers, design partners, contractors, and regulatory authorities, to ensure project success; - Engage in effective communication, providing regular project updates, addressing concerns, and managing expectations to foster strong client relationships; - Actively participate in meetings, presentations, and technical discussions, representing the engineering team and providing expert insights and recommendations. Qualifications: - Bachelor's or Master's degree in Engineering or a related field with 15+ years of experience in Industrial Manufacturing facility design. Minimum 5 years of experience in design and engineering management, overseeing large EV battery manufacturing plant engineering projects and leading multidisciplinary teams; - Ability to obtain relevant professional designation in Georgia; - Strong technical expertise in a relevant engineering discipline, with a deep understanding of design and engineering principles, methodologies, and best practices; - Excellent leadership and people management skills, with the ability to inspire, unify and motivate team members to achieve project goals; - Exceptional problem-solving and decision-making abilities, with a keen eye for detail and a commitment to delivering high-quality results; - Effective communication skills, both verbal and written, with the ability to present complex technical information to diverse audiences (Korean language skills are an asset); - Proven project management skills, including the ability to prioritize tasks, manage resources, and deliver projects within budget and on schedule; - Familiarity with relevant engineering software, tools, and technologies.

Description & Requirements Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. CAREER OPPORTUNITY We are seeking a dynamic and safety driven Maintenance & Engineering Manager for our Stevenson, Alabama Paper Mill. In this role, you will provide decisive leadership for all maintenance and engineering functions, ensuring the systems, processes, and reliability strategies that support the Mill are executed with excellence. While the focus is on leading Maintenance and Engineering, you will also partner closely with facility operations to ensure safe, reliable, and efficient performance of all assets. Reporting to the General Manager, you will drive maintenance work systems, resource planning, and reliability improvements that maximize productivity, quality, and cost effectiveness while advancing the company's overall objectives. How You Will Impact Westrock * Lead with safety as the uncompromising top priority, modeling safe behaviors and driving proactive risk reduction across all maintenance and engineering activities. * Demonstrate a strong sense of urgency-rapidly assess situations, allocate resources, and implement effective short and long term plans to maintain operational stability. * Elevate work systems and reliability practices, ensuring maintenance processes are disciplined, consistent, and continuously improved. * Develop, manage, and optimize the maintenance budget while balancing operational needs and cost stewardship. * Drive a culture of continuous improvement, enabling teams to streamline workflows, eliminate waste, and strengthen reliability fundamentals through data driven decisions. * Provide strategic and tactical direction for the maintenance and engineering departments to meet current and future organizational needs. * Proactively define, execute, and communicate the Capital Project Improvement Plan, including 5 year outlook and in year project implementation. * Build strong internal partnerships, promoting alignment and teamwork across Operations, Safety, Finance, and other mill functions. * Lead and enforce the safety program for all maintenance personnel and contractors; ensure compliance with Mill, Company, State, and Federal regulations. * Promote a culture of critical thinking, robust troubleshooting, and ownership-strengthening the mill's capability to identify root causes and prevent recurrence. * Continuously review equipment and system performance to minimize unplanned downtime, strengthen asset reliability, and identify improvement opportunities. * Support and partner with reliability on all preventive, predictive, and condition based maintenance programs-electrical, instrumentation, controls, automation, and mechanical. * Implement and sustain maintenance excellence through EPAM (Enterprise Process Asset Management), with a strong focus on planning, scheduling, and precision maintenance. * Maintain and optimize systems for work order management, spare parts usage, and equipment history tracking; monitor and improve KPIs such as asset utilization, PM/WO completion rates, and maintenance cost performance. * Ensure all maintenance team members and contractors are properly trained, equipped, and motivated to deliver safe, high quality work efficiently. * Provide coaching, development, and performance management to build a high performing, engaged team. * Support and partner with Facilities Manager on long term infrastructure and reliability planning to safeguard future asset performance. * Manage the effective use of internal labor and contractors, including oversight of various long term contract agreements. * Plan and coordinate all annual maintenance shutdowns to ensure flawless execution and safe, timely startup. * Collaborate with Stores and Accounting to maintain optimal spare parts levels and control inventory investments. * Ensure compliance with insurance recommendations, environmental standards, and all city, county, state, and federal requirements. * Manage the full lifecycle of capital and major maintenance projects, including bid packages, budgets, schedules, and issue resolution. What You Need To Succeed * Bachelor's degree in engineering Preferred. * 5-15 years of maintenance, engineering, or related leadership experience. * Experience in a unionized environment. * Pulp and paper manufacturing experience preferred. * Exceptional communication skills across all organizational levels-from senior leaders and technical specialists to hourly technicians. * Demonstrated ability to lead a diverse, multi discipline team in both supervisory and technical capacities. * Strong competency with business systems, computer applications, and maintenance management tools. * Ability to implement sustainable systems for cost tracking, forecasting, and reporting in partnership with Accounting. * Proven ability to organize resources, set clear priorities, and drive execution with discipline and urgency. * Strong organizational, strategic thinking, and team building capabilities. Keywords: Maintenance & Engineering Manager, Engineering & Maintenance Manager, Engineering Manager, Maintenance & Engineering, Maintenance Manager, Mechanical Maintenance Manager, Maintenance & Engineering Leader, Maintenance & Engineering business unit manager, Maintenance & Engineering operations manager, Maintenance & Engineering Area Manager, mechanical maintenance, mechanical engineering Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by state or federal law.

Inc. Femasys Inc. is a leading biomedical company dedicated to advancing women's healthcare through innovative medical solutions. Our mission is to provide safe, effective, and accessible products that improve women's lives worldwide. The Director of Research & Development is a hands-on technical leader responsible for driving medical device development from early concept through commercialization in a fast-paced, resource-constrained startup environment. This role blends strategic leadership with direct technical execution and requires deep engagement in design, testing, documentation, and manufacturing transfer. The Director will build and lead a small, high-impact R&D team, establish practical yet compliant development processes, and personally contribute to solving complex technical and organizational challenges. Core Responsibilities Hands-On Product Development Actively participate in device design, prototyping, testing, and iteration. Author and review key technical documentation including design inputs/outputs, verification and validation protocols and reports, risk analyses, and change documentation. Lead root cause investigations, design improvements, and issue resolution. Provide technical judgment and decision-making where data may be incomplete or timelines are compressed. Design Controls & Quality Execution Own day-to-day execution of design controls in compliance with FDA 21 CFR 820, ISO 13485, and ISO 14971. Ensure design history files are accurate, complete, and inspection-ready. Balance regulatory rigor with startup pragmatism. Partner closely with Quality to ensure alignment and efficient document flow. Program & Priority Management Translate business and clinical priorities into actionable development plans. Manage multiple concurrent development efforts with shifting priorities. Make trade-offs between speed, cost, and technical risk. Team Leadership & Capability Building Hire, mentor, and develop engineers in a player-coach model. Set clear expectations while remaining directly engaged in execution. Leverage contractors and consultants effectively. Manufacturing & Scale-Up Support Lead design transfer activities including pilot builds and IQ/OQ/PQ support. Work hands-on with Manufacturing and Supply Chain. Support post-launch improvements and issue resolution. Qualifications Required: Bachelor's degree in Engineering or related field. 8-12+ years of medical device development experience. Strong knowledge of FDA design controls and manufacturing transfer. Preferred: Startup or early-stage medical device experience. Experience with minimally invasive or catheter-based devices.

Why UKG: At UKG, the work you do matters. The code you ship, the decisions you make, and the care you show a customer all add up to real impact. Today, tens of millions of workers start and end their days with our workforce operating platform. Helping people get paid, grow in their careers, and shape the future of their industries. That's what we do. We never stop learning. We never stop challenging the norm. We push for better, and we celebrate the wins along the way. Here, you'll get flexibility that's real, benefits you can count on, and a team that succeeds together. Because at UKG, your work matters-and so do you. The Role UKG is seeking an innovative cloud leader to serve as the Director of Site Reliability Engineering (SRE). This role requires extensive experience in large-scale cloud environments and a proven track record of delivering world-class solutions. You will lead a global cloud team dedicated to establishing an SRE culture, aligning enterprise observability capabilities, and evaluating cloud-native technologies to enhance operational efficiency. Your leadership will be pivotal in enabling the business to deliver value rapidly while ensuring a consistent approach to delivery and security in a cloud environment. **Responsibilities:** - Lead product focused SRE teams, executing the vision for a unified enterprise Observability Platform utilized by global Engineering, Product, and Cloud organizations. - Drive organizational change towards a common methodology centered on Site Reliability Engineering and robust System Engineering practices. - Foster a high-performing Site Reliability Engineering (SRE) team by actively mentoring existing team members and strategically hiring top talent to drive organizational transformation and operational excellence - Analyze current technologies and processes, developing strategies for improvement and expansion. - Collaborate closely with engineering professionals to streamline cloud delivery and eliminate manual interventions, focusing on velocity and efficiency. - Partner with engineering leadership to develop and implement improvement plans, monitor progress, and ensure transparency by creating and maintaining a roadmap for engineering and operational enhancements - Provide programmatic building blocks that empower product engineering teams to deliver business value swiftly. - Mentor and train engineers across the organization, fostering a culture of continuous improvement in cloud delivery practices. - Coach the organization on SRE principles, including automation, visibility enhancements, toil reduction, self-healing, and root cause analysis. - Understand business priorities and identify technical initiatives that align with desired outcomes. - Advocate for a Continuous Delivery culture, ensuring that product engineering teams have the necessary tools and technologies to deliver a secure and exceptional customer experience. **Qualifications:** - Bachelor's or Master's degree in Computer Science, Engineering, Software Engineering, or a related field. - 10+ years of development/engineering experience, with significant experience in cloud environments. - Proven ability to manage resources across a global team and influence in a dynamic, matrixed environment. - Strong understanding of public cloud technologies, including experience with Linux-based infrastructures, Windows-based infrastructure, and Google Cloud Platform. - Familiarity with development languages such as Bash, Ansible/Python, Terraform, and GitHub Actions - Experience with automation frameworks and deployment orchestration capabilities - Exceptional communication skills, with the ability to articulate protocols and processes at various organizational levels - Strong analytical mindset, capable of making data-driven decisions - Professional experience with observability platforms such as Datadog, Grafana Cloud, and Splunk - Familiarity with Agile delivery methodologies, including Scrum, Kanban UKG is the Workforce Operating Platform that puts workforce understanding to work. With the world's largest collection of workforce insights, and people-first AI, our ability to reveal unseen ways to build trust, amplify productivity, and empower talent, is unmatched. It's this expertise that equips our customers with the intelligence to solve any challenge in any industry - because great organizations know their workforce is their competitive edge. Learn more at ukg.com. Equal Opportunity Employer UKG is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, disability, religion, sex, age, national origin, veteran status, genetic information, and other legally protected categories. View The EEO Know Your Rights poster UKG participates in E-Verify. View the E-Verify posters here. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Disability Accommodation in the Application and Interview Process For individuals with disabilities that need additional assistance at any point in the application and interview process, please email ******************. The pay range for this position is $179,800 to $258,500, however, base pay offered may vary depending on skills, experience, job-related knowledge and location. This position is also eligible for a short-term incentive and a long-term incentive as part of total compensation. Information about UKG's comprehensive benefits can be reviewed on our careers site at ********************************************* It is the policy of Ultimate Software to promote and assure equal employment opportunity for all current and prospective Peeps without regard to race, color, religion, sex, age, disability, marital status, familial status, sexual orientation, pregnancy, genetic information, gender identity, gender expression, national origin, ancestry, citizenship status, veteran status, and any other legally protected status entitled to protection under federal, state, or local anti-discrimination laws. This policy governs all matters related to recruitment, advertising, and initial selection of employment. It shall also apply to all other aspects of employment, including, but not limited to, compensation, promotion, demotion, transfer, lay-offs, terminations, leave of absence, and training opportunities.

We are seeking an experienced and strategic Director of Research & Development (R&D) to lead innovation and product development in the healthcare and medical device industry. This role is responsible for driving the development of breakthrough technologies, ensuring regulatory compliance, and leading cross-functional teams to bring innovative medical solutions to market. The ideal candidate will have a strong background in Class I and Class II medical device development, regulatory frameworks (FDA, MDR, ISO 13485), and R&D leadership. Key Responsibilities: Strategic Leadership: Develop and execute the R&D roadmap aligned with business objectives and market needs, focusing on Class I and Class II medical devices. Innovation & Product Development: Oversee the ideation, design, and development of next-generation Class I and II medical devices and healthcare technologies. Regulatory & Quality Compliance: Ensure compliance with regulatory requirements, including FDA 510(k), CE Mark, MDR, and ISO 13485. Collaborate with regulatory and quality teams to support submissions and audits. Cross-Functional Collaboration: Work closely with engineering, quality, regulatory, marketing, and contract manufacturing teams to streamline product development from concept to commercialization. Project Management: Establish and track project timelines, budgets, and deliverables while ensuring alignment with company goals. Technology Scouting & Partnerships: Identify emerging technologies, foster partnerships with research institutions, and evaluate potential acquisitions or licensing opportunities. Team Leadership & Development: Build a high-performing R&D team, fostering a culture of innovation, accountability, and collaboration. Risk Management: Assess technical and regulatory risks, implementing mitigation strategies to ensure project success. Qualifications Qualifications & Requirements: · Education: Minimum Bachelor's degree in Biomedical Engineering, Mechanical Engineering, Electrical Engineering, Life Sciences, or a related field. · Experience: Minimum 10+ years of experience in R&D leadership within the medical device or healthcare industry, specifically in Class I and II devices. · Technical Expertise: Strong knowledge of Class I and II medical device design, biomaterials, manufacturing processes, and relevant regulatory pathways. · Regulatory Knowledge: Experience with FDA 510(k), MDR, ISO 13485, and GMP requirements for Class I and II medical devices. · Project & Budget Management: Proven track record in leading multiple projects within time and budget constraints. · Leadership Skills: Demonstrated ability to lead cross-functional teams and drive innovative solutions. · Communication & Problem-Solving: Strong analytical, decision-making, and communication skills. Preferred Qualifications: · Experience in med-surgical devices including: operating room, intensive care unit. · Prior experience in leading R&D in a startup or high-growth environment. · Knowledge of clinical trials, human factors engineering, and reimbursement strategies for Class I and II devices.

Leadership Develop and maintain comprehensive internal and external product roadmaps for each product line, aligning with overall business goals and customer needs. Collaborate with stakeholders to build compelling business cases for product modernization initiatives, including cost-benefit analysis, ROI forecasting, and risk assessment. Continuously assess market trends, customer feedback, and competitive positioning to inform roadmap prioritization and strategic investments. Lead the analysis, planning, and implementation of AI solutions as part of the overall R&D and business strategy, identifying opportunities where artificial intelligence can drive innovation, improve product performance, and enhance customer experience across all product lines.Lead monthly and annual R&D financial forecasting, ensuring alignment with strategic goals and budgetary expectations. Prepare and deliver presentations for monthly BURC (Business Unit Review Calls) and the annual BUSR (Business Unit Strategic Review). Oversee and validate monthly salary reconciliations for all R&D personnel. Collaborate with the Finance team by providing insights and context for monthly financial executive summaries, including explanations of forecasting variances. Ensure timely and accurate upload of monthly R&D task data to corporate systems. Actively participate in weekly leadership calls, contributing to strategic discussions and cross-functional alignment. Collaborate with Sales/Marketing to determine ongoing pricing and packaging model for all products Assist KPMG with compiling and vetting all qualified R&D activities annually to submit for R&D shred tax credits People Leader Conduct weekly meetings with R&D teams across each product line to understand current challenges, provide support, and assist in issue triage and resolution. Design and implement regular cross-training sessions to broaden developer expertise across multiple product lines, enabling greater flexibility and resource coverage within the business unit. Ensure each development team is equipped with the necessary tools to maintain a centralized, secure, and backed-up code repository that is easily accessible by authorized developers. Establish and enforce robust procedures for source code management, including branch maintenance, staged testing, and orderly deployment processes to support defect-free releases. Oversee the implementation and ongoing monitoring of security and encryption protocols for all web-based products, ensuring data integrity and compliance with industry standards. Ensure all products that handle online payment transactions meet PCI compliance standards, including successful completion of quarterly PCI security scans and testing.

We are seeking a Major Incident Manager (MIM) who has experience leveraging industry best practices and tools to handle all high and critical business-impacting technology events, ensuring they are resolved efficiently. This role supports the goals of quality, stability, and security for Enterprise Operations' services across the Company. Top 5 Must Haves: Experience managing major incident processes. Experience handling major technology events in complex environments, inclusive of drafting and distributing wide-scale executive summary communications Strong understanding of industry best practices and tools for incident management. Excellent analytical, technical, facilitation, and written communication skills. Proficient in self-directed learning regarding documented processes and incident management tools to advance personal development. This position is located in Atlanta, GA and requires local candidates to commute to the office from time to time. You must be a US Citizen or Green Card holder to be considered. No sponsorship or transfer of visas are available. Key Responsibilities: Manage high, critical, and limited business-impacting events to resolution, ensuring alignment with the quality and stability objectives for the Company's Technology's services across all Company's products. Play a pivotal role in process management including service strategy setting, service design, transitioning services to production, operations, and continuous improvement. Coordinate with infrastructure and delivery teams to mitigate unplanned events or service interruptions, assess scope and impact, assign priority ratings, and lead efforts to reduce production impacts. Engage leadership and provide timely updates. Utilize a blend of analytical, technical, and communication skills effectively in a team-based setting. Communicate the customer/business/technical impact, status, and resolution to internal stakeholders in real-time. Ensure timely and accurate documentation of incident timelines, scopes/impacts, resolutions, and other quantifiable properties for record-keeping and post-incident reviews. Oversee the Incident Management Process governance. Provide governance and administrative support for Leadership paging and Incident Communication tools. Participate in a scheduled work shift and rotating on-call rotation to maintain 24x7x365 coverage. Manage the inventory of organizational knowledge assets. Essential Knowledge, Experience & Qualifications: Bachelor's degree in Computer Science or a related field, or equivalent professional experience in information technology operations. At least five years of experience in performing IT service management activities. Experience managing major incident processes. Experience handling major technology events in complex environments, inclusive of drafting and distributing wide-scale executive summary communications Strong understanding of industry best practices and tools for incident management. Excellent analytical, technical, facilitation, and written communication skills. Capability to work effectively within a team-based environment. Proficient in self-directed learning regarding documented processes and incident management tools to advance personal development. Adept at managing complex and time-sensitive tasks. Keen attention to detail for effective communication and post-incident analysis. Ability to consistently and comfortably collaborate closely with executives and senior leadership. Desirable Knowledge, Experience & Qualifications: Proven experience managing comprehensive major incident processes and tools. Proven experience overseeing major technology events in complex settings, including drafting and distributing broad executive summary communications. ITIL v4 Foundations Certification. Experience in Organizational Communications.

* Leading, driving, facilitating, and chairing Major Incident meetings * Leveraging technology to issue all communications and providing key stakeholder management * Matrix management of people, processes and resources including third parties - including resolving conflict to move forward to resolution * Ensuring all administration and reports are maintained and up-to-date, including Incident chronology, whiteboard, post major incident reviews * Supporting and nurturing process improvements and knowledge base improvements * Continually maintaining and developing tools and resources to manage major incidents effectively * Providing periodic major incident metrics reports * Coordinate, standardize, and lead all ITIL problem management activities ensuring root cause and prevention is identified * Participate in post mortem meetings and drive service providers to identify root cause including well defined corrective/preventative action plans * Facilitates and participates in problem management meetings with focus on recent major incidents, RCA status, incident trending, and operational issues. * Develop trend analysis and prepare service improvement plans to address identified gaps * Manage and maintain information stored in the problem database * Ensure the problems progress through the Problem Management process in a timely and prioritized fashion * Prepare statistics, KPI and trend reports for use in the problem management process. Identify problems through the review and focus on optimizing processes * Performing monthly audits for Major Incidents and Problem Tickets to ensure laid and defined process is executed Salary Range- $80,000-$95,000 a year #LI-SP3 #LI-VX1

What We Need Corpay is currently looking to hire a Critical Incident Manager I. This position is remote. In this role, the Critical Incident Manager I will manage the process to restore normal IT service operation as quickly as possible to minimize the impact to business operations. You will report directly to Stephen Thompson and regularly collaborate with IT Operations team. How We Work As a Critical Incident Manager I, you will be expected to work in a virtual environment. Corpay will set you up for success by providing: Company-issued equipment Formal, hands-on training Role Responsibilities The responsibilities of the role will include: Ensuring the established Incident policies and procedures are performed as documented and monitor and report on any noncompliance issues as well as successes. Acting as the escalation point for qualifying high impact incidents, Facilitate Incident Calls to restore failed IT Service(s) as quickly as possible, using defined escalation paths Ensuring thorough documentation of events, including timelines and documenting outcomes. Accurately auditing Incidents classifications for categorization, prioritization, and related configurations. Associating Incidents with other records (i.e. Incidents, Changes, Problems, Knowledge Articles, Known Errors, etc.) Timely and Accurate handling of Incident status reporting to affected parties leveraging all communications technologies as needed Verifying resolutions with customer and resolve Incidents in ITSM tool Identifying initiate, schedule and conduct incident reviews to identify potential problems and/or increasing trend of repetitive Incidents Initiating and manage Problem records through the Problem Management lifecycle Creating Knowledge Article documentation with repeatable procedures Supporting the goals of Incident Service Levels. Responsible for the effective implementation of the processes "Incident Management" and "Problem Management" and carries out the respective reporting procedure(s). Establishing continuous process improvement cycles where the process performance, activities, roles and responsibilities, policies, procedures and supporting technology are reviewed and enhanced where applicable This position does not have supervisory responsibilities Essential duties require the following physical skills and work requirements: Will require rotational and shift assignment and may also be required to travel to and work at an alternate location, which may be out of state. Position requires work schedules of days or nights to support a 24/7/365 work environment. Individual must be flexible to work as needed, in addition to holidays and weekends. This role requires on-call support. Qualifications & Skills Associate's degree (A. A.) or equivalent from two-year college or technical school and five or more years related experience and/or training; or equivalent combination of education and experience. ITIL Certification preferred Two (2) years' experience as aTier1/Tier2 Support team leader and/or Incident Analyst combined, or Two (2) years' experience as an IT Incident Coordinator or IT Incident Manager role. ITIL Fundamentals General understanding of data processing methods General understanding of Windows, UNIX and LINUX servers General understanding of database concepts General understanding of enterprise IT monitoring tools (Solarwinds, Splunk, Dynatrace, Extrahop) Interpret and create Procedural documentation Expert level of Microsoft Office (Word, Excel, PowerPoint,Visio) Personal computer applications Database and spreadsheet concepts ITSM Corporate Toolsets (ServiceNow) user/admin functions Prioritize competing requests for service Ability to articulate technical information & conditions using non-technical terms Establish and maintain effective working relationships Facilitate conference calls with multiple individuals in a wide range of rolls Apply new technologies and system changes Analyze and categorize data and information in order to determine the relationship of the data with reference to established criteria/standards; Advise and provide interpretation to others on how to apply policies, procedures and standards to specific situations Exercise the judgment, decisiveness and creativity required in situations involving the evaluation of information against measurable criteria Keep up-to-date technically and apply new knowledge where appropriate Must be dependable and accountable for own actions Possess ability to act upon oral and/or written instruction provided Possess ability to troubleshoot quickly and accurately Effectively use time management skills Must demonstrate accuracy and thoroughness; look for ways to improve and promote quality; apply feedback to improve performance and monitor own work to ensure quality Must be a team player with ability to establish and maintain effective working relationships with team members, clients and vendors; able to adapt to changes in the work environment, i.e., managing competing demands, delays or unexpected events Benefits & Perks Medical, Dental & Vision benefits available the 1st month after hire Automatic enrollment into our 401k plan (subject to eligibility requirements) Virtual fitness classes offered company-wide Robust PTO offerings including: major holidays, vacation, sick, personal, & volunteer time Employee discounts with major providers (i.e. wireless, gym, car rental, etc.) Philanthropic support with both local and national organizations Fun culture with company-wide contests and prizes Equal Opportunity/Affirmative Action Employer Corpay is an Equal Opportunity Employer. Corpay provides equal employment opportunities to all employees and applicants without regard to race, color, gender (including pregnancy), religion, national origin, ancestry, disability, age, sexual orientation, gender identity or expression, marital status, language, ancestry, genetic information, veteran and/or military status or any other group status protected by federal or local law. If you require reasonable accommodation for the application and/or interview process, please notify a representative of the Human Resources Department. Pay Transparency This salary range is provided for locations which require such disclosure. Where a position or applicant may fall in a particular wage range depends on a number of factors including but not limited to skill sets, experience training licenses and certifications (if applicable), and other business and organization needs. The disclosed range has not been adjusted for the applicable geographic markets. At Corpay it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions depend on the facts and circumstances of each case. The estimate of the minimum and maximum salary range is $80k-$100k. For more information about our commitment to equal employment opportunity and pay transparency, please click the following links: EEOC and Pay Transparency.