Installation technician jobs in Pedley, CA - 2,614 jobs

Technica, USA (***************** is a leading supplier of advanced equipment solutions for the printed circuit board (PCB) and printed circuit board assembly (PCBA) industries. We are committed to delivering high-quality technology and exceptional customer support to manufacturers across the U.S. Position Overview Technica is seeking a highly motivated Equipment Field Service Technician to install, service, and support capital equipment used in PCB and PCBA manufacturing environments. This role is responsible for equipment installation, preventive maintenance, troubleshooting, repairs, and rebuilds at customer sites. The ideal candidate is hands-on, self-directed, customer-focused, and operates with the highest level of integrity and professionalism. Key Responsibilities Install, commission, and service capital equipment at customer facilities Diagnose and troubleshoot mechanical, electrical, and control system issues Perform preventive maintenance, repairs, and equipment rebuilds Conduct equipment audits and performance evaluations Provide on-site technical support to resolve customer production challenges Document service activities and generate detailed service reports Maintain strong customer relationships through effective communication and responsive service Qualifications Minimum of 2 years of experience in a PCB or PCBA manufacturing environment, or related industry Valid U.S. driver's license legally authorized to work in the United States Stable work history with verifiable positive references Required Skills & Abilities Willingness to travel domestically more than 50% of the time, often on short notice Strong work ethic with a positive, solution-oriented “whatever it takes” attitude Self-motivated and capable of working independently with minimal supervision Strong commitment to customer satisfaction and service excellence Excellent communication and interpersonal skills Ability to leverage all available resources to diagnose and resolve technical issues Proficiency with computers, including the ability to create detailed service and equipment Ability to read and interpret electrical schematics Experience troubleshooting and maintaining PLC-controlled equipment Comfortable working around industrial equipment, chemicals, and environmental conditions typical of PCB and PCBA manufacturing facilities Preferred Qualifications Prior experience servicing Wise equipment

Growing food production facility near Gardena, CA is seeking a hands-on Continuous Improvement Technician to enforce CI initiatives, 5S programs, and capital projects across our manufacturing operations. This role reports to the Process Engineer, and focuses on improving shop floor performance, business processes, and overall value chain efficiency while ensuring improvements are sustained long-term. This position is not a standard 40-hour role. The successful candidate must be available as needed, including weekends, when critical project work is scheduled. Key Responsibilities Enforce Continuous Improvement (CI) projects using DMAIC Serve as 5S Champion and ensure long-term sustainment of improvements Manage capital improvement projects and support capital planning Implement CI changes on the shop floor (layout, material flow, Kanban, workstation design) Conduct data analysis using control charts, Pareto charts, histograms, etc. Drive waste reduction, productivity improvements, lead time and WIP reduction Perform root cause analysis and barrier removal Create standard work, time studies, and production support tools Track, document, and report project results Support Kaizen and continuous improvement culture throughout the facility Qualifications High school diploma or GED required 3+ years of manufacturing experience Lean / Six Sigma White or Yellow Belt required Strong knowledge of Lean tools: 5S, Kaizen, Value Stream Mapping, 8 Wastes Food manufacturing experience preferred Experience participating in capital projects Strong technical, problem-solving, and communication skills Intermediate to advanced computer skills (Microsoft Office) Ability to analyze data and apply practical solutions Work Expectations Must be willing to work 50+ hours per week Weekend work required when project timelines demand it Flexible weekday scheduling when appropriate Why Join Us Direct influence on plant performance and growth Opportunity to manage major operational improvements Stable, growing manufacturing environment Salary Range: Depends on Experience Level.

Job Posting Start Date 12-04-2025 Job Posting End Date 02-27-2026 Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a/an Site Installation Assembler in USA, Fontana Ca. Reporting to the Construction & Logistics Manager, Site Installation Assembler is responsible for working in the field to install our pre-fabricated enclosure buildings using an array of tools and equipment. Please Note: This position will require 90% of overnight travel across the United States via company vehicle and/or airplane. Must have valid identification for air travel in accordance with TSA regulations. What a typical day looks like: Review, analyze, and follow various blueprints, diagrams, drawing, procedures, and work instructions to complete assemblies for enclosure buildings Assemble and install electrical components including panel boards, HVAC units, battery systems, electrical devices, and bending conduit Uses various power tools and hand tools (ex. Drills, impacts, screwdrivers, grinders, etc.) to accomplish assigned tasks Conduct quality assurance checks to confirm that assembled products meet specifications and quality standards Identify any product defects; record and report them accordingly Monitor and maintain inventory of necessary product for each job Maintain a clean and safe work area Perform all other duties as assigned The experience we're looking to add to our team: High school diploma or equivalent required Experience in wiring and installing electrical control/relay panels or mechanical assembly Experience working with a manufacturing or construction environment preferred OSHA 10 Construction Certification preferred or must be obtained within the first 30 days of employment. Current Driver's License and ability to pass an MVR to operate company vehicles Strong attention to detail and ability to perform work accurately Knowledge of manufacturing, equipment maintenance, and safety management Reading comprehension skills with the ability to interpret and follow written directions, blueprints, and engineering diagrams Basic math skills to meet technical specifications and measurements Basic understanding of tools (ex. Tape measure, impact drill, etc.) What the physical requirements are: Must be able to traverse all areas of jobsite in all types of weather; this may include walking, climbing, reaching, bending, crawling, or stretching. Prolonged periods of standing and performing repetitive tasks. Must be able to lift up to 35 pounds at a time. Must have manual dexterity in order to assemble products or machines as directed. Must have excellent hand-eye coordination. Ability to differentiate between colored wires, tabs, and electronic components. Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor and at job sites #LI-GB1 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to California)$18.33 USD - $24.75 USD HourlyJob CategoryOperations Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

This position is responsible for providing installation of equipment in the practitioner's office under the direction of a Lead Technician or Project Coordinator. Work closely with experienced installers and supervisor to develop and improve customer service skills, use provided support tools, learn effective troubleshooting techniques, and increase product knowledge. Drive installation success to improve customer satisfaction, maximize customer retention and increases profitability. KEY RESPONSIBILITIES: Provides installation services to customers in a courteous and professional manner. May also provide repair services to customers on an as needed basis. Provides and maintains the necessary tools of the trade and have readily available to perform installation and repair services. Complete all on site installation, repair maintenance and test tasks under supervision of a Lead Technician or Project Coordinator. Follow proper troubleshooting steps to diagnose errors on technical problems and determine proper solutions. Comprehends customer requirements and make appropriate recommendations to optimize the customer experience. Maintains and manages proper levels of inventory in van. Produces timely and detailed service reports. Attends all required training, which includes but is not limited to Henry Schein Dental Career Development training and specific manufacturer technical training. Complies with all OSHA regulations as outlined in the OSHA manual and training. Maintains and utilizes personal protective equipment when needed. Communicates in a timely manner to all Team Members and HUB dispatchers, keeping all informed of progress of assignments. Completes all work orders in a timely manner. The work order should be reviewed with the customer or a responsible staff member prior to departure. This review should include the time in the office, work performed, parts replaced, and parts to be ordered. All work orders should be closed daily and submitted for billing. Submits all job-related paperwork within the required timeframes. This includes but is not limited to FDA Forms, expense reports, and any other required paperwork. Complies with all terms of the Fleet Management Policy including maintenance and accident management policies. Participates in special projects and performs other duties as required. SKILL: Entry level technical professional; learning on the job. Has learned the fundamental concepts, practices, and procedures of a particular field of study, not yet the formal application of these concepts, practices, and procedures. Resolve the most routine issues. COMPLEXITY: Work on problems of limited scope and impact with no to limited discretion to vary from established procedures. Perform structured work assignments using existing procedures to solve the most routine problems. Follow standard practices and existing procedures in analyzing situations or data from which answers can be readily obtained. Begin building working relationships internally and externally. SUPERVISION: Work under close supervision and receive detailed instruction, guidance and direction on all assignments. WORK EXPERIENCE: Typically, 2 or more years of field service experience with demonstrated proficiency, basic mechanical background and customer service background. PREFERRED EDUCATION: Typically High School education, vocational training and/or on-the-job training. Associates degree or Technical School Certification is preferred. GENERAL SKILLS & COMPETENCIES: Basic troubleshooting skills Independent self-starter Basic computer skills Interpersonal / communication skills Professionalism Accuracy and detail-orientation SPECIFIC KNOWLEDGE & SKILLS: Working knowledge of hydraulics, mechanical and electrical systems PERFORMANCE REQUIREMENTS: To advance to a new job level, TSM must complete the following: Level 1 Certifications to be determined by the ROM/ZOM based on business need Must begin to cross certify (digital x-ray/software, digital CAD/CAM, etc.) Proven ability to administer on time and accurately (work orders, FSRs, Concur, eTime, RMA's, 2579 reporting, etc.) Ability to present preventative maintenance to customers Ability to lead installations Must demonstrate professional behavior and should consistently be at the high-end of meets expectations or consistently exceed expectations. TRAVEL / PHYSICAL DEMANDS: The Equipment Install Technician (EIT) position will require the delivery, installation and repair of Equipment involving Henry Schein customers. Technicians will be expected to maneuver large equipment as needed. The physical nature of the position, at times, may require substantial and/or repetitive bending, stopping, lifting and climbing of ladders. COMPENSATION: The posted range for this position is $51,508 - $70,825, which is the expected starting base salary range for an employee who is new to the role to fully proficient in the role. Many factors go into determining employee pay within the posted range including education, prior experience, training, current skills, certifications, location/labor market, internal equity, etc. At the time of this posting, this position is eligible for a bonus not reflected in the posted range subject to the achievement of the plan. Henry Schein, Inc. is an Equal Employment Opportunity Employer and does not discriminate against applicants or employees on the basis of race, color, religion, creed, national origin, ancestry, disability that can be reasonably accommodated without undue hardship, sex, sexual orientation, gender identity, age, citizenship, marital or veteran status, or any other legally protected status. Henry Schein, Inc. is an Equal Employment Opportunity Employer and does not discriminate against applicants or employees on the basis of race, color, religion, creed, national origin, ancestry, disability that can be reasonably accommodated without undue hardship, sex, sexual orientation, gender identity, age, citizenship, marital or veteran status, or any other legally protected status. For more information about career opportunities at Henry Schein, please visit our website at: *************************** Fraud Alert Henry Schein has recently been made aware of multiple scams where unauthorized individuals are using Henry Schein's name and logo to solicit potential job seekers for employment. Please be advised that Henry Schein's official U.S. website is ******************* . Any other format is not genuine. Any jobs posted by Henry Schein or its recruiters on the internet may be accessed through Henry Schein's on-line "career opportunities" portal through this official website. Applicants who wish to seek employment with Henry Schein are advised to verify the job posting through this portal. No money transfers, payments of any kind, or credit card numbers, will EVER be requested from applicants by Henry Schein or any recruiters on its behalf, at any point in the recruitment process.

JOB TITLE: Countertop Installer JOB TYPE: Open for Full-time and Part-time hours PAY: Range: $1,000-$3,000 per week (based on experience and job volume) ABOUT US: We're a family-owned and operated kitchen, bath, and flooring remodeling company located in Southern California. With over 40 years in business, we take pride in delivering high-quality craftsmanship and exceptional customer experiences. Our mission is to improve people's lives by transforming their surroundings and providing a fun, hassle-free remodeling experience. Do you want to grow your career? Start here. JOB DESCRIPTION: We are seeking an experienced Countertop Installer to join our installation team. This position involves hands-on installation of a variety of countertop materials, including quartz, granite, solid surface, and laminate. The ideal candidate has a strong eye for detail, excellent craftsmanship, and a commitment to safety and customer satisfaction. REQUIREMENTS: Proven experience in countertop installation (residential or commercial). Knowledge of countertop materials, fabrication, and installation techniques. Ability to measure, cut, and fit countertops accurately. Experience using hand and power tools safely and efficiently. Ability to read and interpret blueprints, layouts, and measurements. Excellent attention to detail and problem-solving skills. Strong communication and customer service abilities. Valid driver's license and reliable transportation. Ability to lift heavy materials and work in a team environment. RESPONSIBILITIES: Install a variety of countertop surfaces (e.g., quartz, granite, marble, laminate) with precision and care. Measure and fit countertops to ensure proper alignment, seams, and finishing. Make on-site adjustments as needed for a perfect fit. Collaborate with project managers, team members, and clients for smooth project completion. Maintain a clean, safe, and organized work area. Represent the company professionally and courteously on every job site. Qualifications: Solid 5 years+ proven experience in cabinet refacing, countertop fabrication, or kitchen/bath remodeling. Strong knowledge of tools, materials, and installation techniques. Reliable transportation and your own tools. Ability to read blueprints, measurements, and job specifications. Excellent problem-solving skills and a strong work ethic. BENEFITS: Weekly Pay (1 week behind) Direct Deposit after 30 days Opportunities for Growth Employee Events and Parties Employee Discounts Powered by JazzHR JK1iOIAcPF

Hi, Greetings Hope you are doing great! I would like to update you on an urgent open position with our esteemed client. Please go through the Job Description. Send me your updated resume and expected rate for the below position Role: Technology Lead - Java, Angular JS, Web Services (Interview on 19th August) Duration: Full Time Location: Irvine/Los Angeles, CA. Qualifications Basic • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. • At least 4 years of experience with Information Technologies Preferred • At least 8 years of experience in Java, J2EE Skills • At least 2 years of experience in Hibernate, Spring Framework, HTML, jQuery, Caching mechanisms, AJAX, Angular JS / Node JS, CSS, Bootstrap • At least 2 years of experience in Oracle/MS SQL Server RDBMS and Apache Tomcat/Oracle WebLogic Application Servers. • Knowledge of configuring Webserver (Apache) Rules • Basic knowledge/experience of iOS • At least 2 years of experience in creating and consuming SOAP and REST web services • Ability to troubleshoot performance issues and identifying opportunities to improve code/design will be added advantage • Ability to quickly scale up on the domain and delivering highly efficient bug free code quickly. • To be able to design and develop using latest J2EE technologies, frameworks and latest development and testing tools. • Knowledge of Autosys Batch Jobs and Spring Integration Framework is preferred • Knowledge of Informatica ETL and Microsoft .NET is preferable but optional • At least 8 years of experience in software development life cycle and at least 2 years of experience in Agile development • At least 8 years of experience in Project life cycle activities on development and maintenance projects. • At least 3 years of experience in Design and architecture. • Ability to work in team in diverse/ multiple stakeholder environment. • Proven experience of managing and guiding teams desired. • Demonstrated ability to grasp concepts and quickly come up the learning curve to implement new technologies. • Prior experience in interfacing between disparate applications/systems/platforms would be preferred. • Ability to appreciate enterprise level architecture patterns. • Experience in Mutual Fund Markets domain is preferable but optional. • Strong Analytical and grasping skills. • Experience and desire to work in a Global delivery environment • Strong verbal and written communication. • Demonstrated ability to identify, socialize and implement unstated business needs/value adds. • Knowledge on Data Analytics, Content Management preferred • Experience and desire to work in a Global delivery environment Qualifications • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. Additional Information All your information will be kept confidential according to EEO guidelines.

Description: Why join us? Our Vision - To provide outstanding garage door repair service, complete customer satisfaction and a program that rewards excellence from our franchisees, technicians, and staff. Our Mission - To establish Precision Door Service as the public standard and national household name in garage door repair service. Our Values - Culture, Reliable People, Career Oriented, Industry Standard Training and Safety, Competitive Salaries & Benefits, Garage Door Leaders The Residential Installer serves as the door installer for residential garage doors and related components. The installer interacts with customers daily providing them with excellent customer service. Work assignments are received from the call center or Customer Service Managers (CSM's.) Any problems, questions, or issues will be referred to the Branch Manager for clarification or resolution. The Residential Garage Door Installer is the first line of support for customers and is expected to maintain a neat and clean appearance, and to treat all customers with decency and respect. Job Description - Remove and haul existing garage door. Installation of new garage doors. Attend and participate in all required safety meetings and training sessions Learn the basics of track alignment, track adjustment, adequate back hangs, operator arm, photo eye setting, and other door and operator repairs Learn basic door and operator maintenance skills and review new products when appropriate Retain an appropriate level of product knowledge for products offered Ensure installation is performed to the customer's satisfaction and resolve issues or problems Review Work Order/Invoice information for accuracy and completeness before departing the job Promote Precision Door Service products and services wherever possible Ensure truck is fueled, serviced, and ready for operation prior to beginning of workday Ensure truck is restocked with appropriate material daily Assist in unloading of trucks when requested Maintain timecards for compensation Perform a variety of secondary support tasks as requested by the Branch Manager Requirements: Must possess a valid driver's license Must be able to pass a standard drug test upon request Must have good mechanical aptitude and demonstrated ability to understand and work with common power tools Must be able to lift up to 100 pounds and carry for up to 50 feet Must be able to read and write legibly and accurately Must be able to walk and carry items on uneven ground Must be able to climb and work from a 12' step ladder Must be able to safely drive a service truck or van during the day, at night, and in inclement weather conditions. Core Competencies Customer-focused and Customer Service Orientation - Works with clients and customers to assess their needs, provides information or assistance, resolves their problems or satisfies their expectations; knows about available products and services; is committed to providing quality products and services; honors all of the franchise's commitments to customers by providing helpful, courteous, accessible, responsive, and knowledgeable customer service. Effective Communications - Practices meaningful two-way communication by speaking clearly, paying close attention and seeking to understand others, listening attentively and clarifying information attending to nonverbal cues, and responding appropriately; influences and ensures support for proposed ideas. Service Focus and Teamwork - Values and delivers high quality, professional, responsive, and innovative service while cooperating with others to accomplish common goals; works with others within and across the company to achieve shared goals; treats others with dignity and respect and maintains a friendly demeanor; values the contributions of others. Interpersonal Skills - Shows understanding, friendliness, courtesy, tact, empathy, concern, and politeness to others; develops and maintains effective relationships with others; may include effectively dealing with individuals who are difficult, hostile, or distressed; relates well to people from varied backgrounds and different situations; is sensitive to cultural diversity, race, gender, disabilities, and other individual differences. Job Mastery and Continuous Learning - Takes steps to develop and maintain knowledge, skills, and expertise necessary to achieve positive results; participates fully in relevant training programs and actively pursues other opportunities to develop knowledge and skills. Working Conditions - Able to work a flexible schedule including weekends, holidays and evenings to accommodate phone calls from customers. Must be able to sit for extended periods of time (driving and travel time.) Must be able to work in extreme heat or cold; dirty, dusty, and oily environments. Physical Requirements - Medium to heavy work - as an installer, must be able to lift up to 100 pounds and carry for up to 50 ft. As well as walk and carry items on uneven ground; and have manual dexterity in both hands, which allows the use of a hand tool. Talking - expressing and exchanging ideas and advice by means of spoken word. Those activities in which they must convey detailed or important spoken instructions to other workers and customers accurately, loudly, or quickly. Hearing - perceiving the nature of sounds at normal speaking levels or without correction. Ability to receive detailed information through oral communication and make fine discriminations in sound. The incumbent is subject to both environmental conditions, with activities occurring inside and outside. *This is a commission-based role with an average earning potential of $80,000-$110,000 per year. Compensation is based on a piece-rate commission structure, meaning you are paid per item completed or sales made. Your earning potential is directly tied to your productivity and efficiency. Paid training is provided during the first 12 weeks to ensure your success at a pay range of $20.00 to $22.00. Training pay offered may vary depending on geographic region, internal equity, job-related knowledge, skills & experience, among other factors. At Precision, we invest in our team with comprehensive benefits, including medical, vision, and dental coverage, plus a 401(k) for eligible positions. **** Our company's pay period is Sunday through Saturday, with WEEKLY payroll! That means payday is EVERY Friday! ****

At Innovative Pest Solutions, servicing the Los Angeles, Orange, and Riverside Counties, we're hiring a full-time Branch 2 Lead Clean-Out Services Team Technician who believes in building more than just a career. Meet Your Future Team: Innovative Pest Solutions, established in 1994, stands as a pioneering leader in integrated pest management. Our comprehensive range of services includes specialized solutions for birds, bed bugs, heat treatment, rodents, termites, and weeds. Each division is dedicated to creating tailored plans that demonstrate our unwavering commitment to excellence in pest management. Despite our growth, we cultivate a close-knit environment where every employee is valued and supported. Join our team today and be a part of our mission to ensure the safety and health of our community! What's In Store For You: Pay: $75,000 - $100,000 (based on performance and experience) Schedule: Full-time, Monday - Friday schedule Benefits: Medical Dental Vision A 401(k) Career growth opportunities within a supportive team environment ABOUT THIS ROLE: In this Branch 2 Lead Clean-Out Services Team Technician role, you will be the lead technician, working hands-on while also supervising, mentoring, and training a junior technician under your direct mentorship. Lead a two-man cleanout services crew, ensuring quality and efficiency on every job. Perform pest control cleanout services in both commercial and residential settings. Ensure compliance with safety and regulatory requirements. Follow strict Integrated Pest Management (IPM) principles at all times. Deliver outstanding customer service with professionalism. Report service details accurately and maintain necessary documentation. DO YOU HAVE WHAT IT TAKES? Valid Branch 2 Field Representative license Valid Class C driver's license 5+ years of licensed driving experience with a clean driving record Strong Integrated Pest Management (IPM) experience Highly organized, detail-oriented, and stringent in managing regimented, document-heavy programs Sharp eye for detail and a commitment to quality Strong leadership and communication skills Willing to follow detailed protocols and maintain the highest standards of precision Ability to train and mentor others effectively Ready to lead a team and make a real impact? Our initial 3-minute application is mobile-friendly and simple to complete. Start your journey with us today and apply for the Branch 2 Lead Clean-Out Services Team Technician position!

Are you an experienced DC Power Technician looking to take the lead on critical infrastructure projects? This role offers the opportunity to oversee field operations, manage complex installations, ensure strict compliance with safety standards, and mentor technicians in a hands-on environment.

Fiber Splicer (T3) Crown Castle is the nation's largest provider of shared communications infrastructure: towers, small cells and fiber. It all works together to meet unprecedented demand-connecting people and communities and transforming the way we do business. Whenever you make a call, track a workout or stream music and videos, we're the ones providing the communications infrastructure that makes it all possible. From 5G and the internet of things to drones, autonomous vehicles and AR/VR, we enable the technologies that help people stay safe, connected and ready for the future. Crown Castle is publicly traded on the New York Stock Exchange (CCI), is part of the S&P 500 and is one of the largest Real Estate Investment Trusts in the US. We offer a total benefits package and professional growth development for teammates in any stage of their career. Along with caring for our teammates, we're an active member in the communities where we live, work and do business. We have a responsibility to give back, which we do through our Connected by Good program. Giving back allows us to improve public spaces where people connect, promote public safety and advance access to education and technology. Although you'll be hired as a Crown Castle employee, your employment and the responsibilities associated with this job likely will transition to an acquiring company in the future. For more information, please visit: https://www.crowncastle.com/strategic-review-results Role The Fiber Splicer position will splice & test fiber optic cables in aerial, underground, and indoor physical field environments. The position will need to have attention to detail regarding setting up splice locations, termination points, splice quality, work environment safety and general fiber optic construction. This position will be subject to on-call and shift duties. Weekends and holiday work will also be required. Responsibilities Splicing on new construction and restoration for a variety of cable types (Loose Tube, Ribbon, Micro, OPGW, etc). Active splicing activity in cables with both dark fiber and lit services. Conduct and validate all testing of network equipment to ensure adherence to all Crown Castle Fiber procedures and equipment manufacturer's specifications. Work with the Network Operations Center for final acceptance and testing of all newly installed equipment and rings. Tests to include validation of all provisioning, all alarm monitoring to the NMS (Network Management System), network switch protection, etc. Work with Fiber Optic, SONET, Ethernet and SDH related test equipment including OTDR, PMD, Optical Spectrum Analyzer, BER Test Sets, Sniffers. Perform site survey of remote locations to ensure quality installation of all racks, equipment power plants, fiber cable, etc. Report any and all defects to the Operations Manager and /or OSP Project Engineer. Label and tag all equipment and cabling according to Network Engineering Diagrams. Perform advanced analysis and troubleshooting of problems / issues while assisting the NOC/customer. Participate in on-call rotation schedule for nights and weekends. Perform other duties and responsibilities as required and assigned. Perform both hardware and software updates and/or changes to remote site equipment as necessary. Complete and maintain hard copy and/or electronic records of work completed on various assignments. Including, but not limited to, splice diagrams, patch panels, and test results. Interface with customers and carriers in support of service delivery and assurance. Work independently for extended periods of time. Respond to Customer Troubles on 24-hour basis. Work closely with the NOC, Sales, Engineering, and customers. Education/Certifications High school diploma or equivalent required Associate degree or equivalent work experience preferred Valid Driver's license required Experience/Minimum Requirements One (1)+ years of experience in the splicing, testing, installation, maintenance and repair of fiber optic networks and/or Outside Plant fiber experience. Or minimum of two (2) years of field experience or military experience. Prefer prior work experience with base station equipment, NMS, equipment installation and maintenance, low-power broadcast equipment and experience in both the construction, installation and maintenance phases Prefer prior use of Volt/Ohm meter, RF power meter, frequency sweep equipment, spectrum analyzer, fault locating equipment and battery conductance meters Knowledge of Outside Plant Construction techniques (aerial & underground) preferred Working knowledge of NESC, NEC and OSHA standards preferred Experience splicing ribbon and loose tube cables. A Valid driver's license is a bona fide job requirement to drive and operate a Crown Castle vehicle in this position. Subject to local and state eligibility, a pre-employment background check with MVR will be conducted to evaluate a candidate's safety record and eligibility to drive for a job. Other Skills/Abilities Excellent organizational/administrative skills Self-motivated team player Solid written and verbal communications skills Ability to multi-task in a fast-paced environment Customer service orientation with a strong problem-solving approach Possession or ability to readily obtain a valid driver's license for the type of vehicle or equipment operation (e.g. vehicle with bucket lift). Knowledge of fiber optics termination panels Organizational Relationship Reports to: Supervisor Field Operations Title(s) of direct reports (if applicable): N/A Additional Information: N/A Working Conditions: Will be required to travel to customer and/or project sites with exposure to heavy equipment and environmental conditions over 90% of the time. Works in a normal office setting with no exposure to adverse environmental conditions as little as 10% of the time. Position requires on call rotation involvement. Ability to use hand tools, climb ladders, pull fiber cables and wires. Splicing work may be performed in a confined splice trailer or other available space. The work may often be performed near busy city, state or federal streets and highways. Employee may be exposed to noise, dust, dirt, grease, etc. Compensation The pay range offered for this position is $32.12-$44.13 per hour. A candidate's offer is determined by various factors including but not limited to, depth of experience, role-related knowledge and skills, relevant education or training, internal alignment, and work location. Depending on the position offered, the compensation package may also include incentive compensation opportunities in the form of a discretionary annual cash bonus or commissions, and equity incentives. Employees (and their families) are eligible for medical, dental, vision, and basic life insurance. Employees are able to enroll in our company's 401k plan. Employees will also receive a minimum of 18 days of paid time off each year and 12 paid holidays throughout the calendar year. Pursuant to the Los Angeles County and San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. If you are interested in joining our team, please visit the Crown Castle careers site (crowncastle.com/careers) to apply. We do not accept resumes from agencies, headhunters, or other third-party suppliers who have not signed a formal agreement with us. This position will remain posted until filled. #LI-IM1

Job DescriptionBenefits: Bonus based on performance Company car Competitive salary Flexible schedule Free uniforms Role: Lead Home Service Technician / Handyman We provide: Year-round stable, steady work Regular work hours Flexible scheduling Vehicle maintenance / gas reimbursement TruBlue t-shirts, polos, and other company gear for the team Strong office support TruBlue is a Home Ally Service company dedicated to providing premium handyman services with bonded and insured technicians, giving our customers peace of mind. Our mission is to help people maintain the safety and value of their homes by offering handyman services, home assessments, and regular maintenance We are searching for a reliable lead home technician (handyman/handywoman) to provide general home services to our customers in our community AND lead a group of technicians who will report to you. If you have 10 or more years of paid experience in general carpentry and handyman work, we want to hear from you. We are looking for a seasoned Team Leader with the following experience: Bathroom upgrades / remodel Drywall repair / patching/ caulking Flooring repair and installation General carpentry General home repairs and handyman work Kitchen repair / remodel Minor plumbing and electrical Painting interior and exterior What we value: FAMILY Why else are we in this business? It is our most important asset, and we strive to make everyone feel like they are part of our family! INTEGRITY Treating people with respect and looking for the same in return, everyone has a voice! TRUST Achieved through reliability and credibility, cannot just talk it, ya gotta walk it too! QUALITY Taking pride in ones work and providing the best value and customer experience possible, they will not always remember the work that was done, but they will remember you! The appropriate candidate for the Lead Technician/Handyman position will be proficient in miscellaneous around-the-house type repairs like carpentry, basic plumbing, drywall, painting, and basic electrical. Candidates do not need to be licensed tradesmen, but those candidates are welcome to apply. Qualified candidates will need a driver's license, a reliable vehicle, and standard tools. Candidate must also be a legal citizen of the US, and speak fluent English We are actively interviewing for this position - if you have the Lead Home Service Technician / Handyman skills we're looking for, apply today, and our hiring manager will follow up!

HVAC Repair Technician Why an HVAC Repair Technician career might be right for you: You like solving problems - Each repair is different. You enjoy diagnosing problems and figuring out solutions You like fixing things - Getting things working again is a satisfying outcome. You did that! You like helping others - You're the hero of the home like a first responder, lifting the weight off the shoulders of grateful homeowners You like to be on the move - You're not stuck at a desk all day - you are welcomed into customers' homes Why a career with Sears Home Services is right for you: Great hourly rates - $22 - $36 / hour base rate salary, depending on experience Benefits - Comprehensive set of medical, dental, and vision benefits, with an additional $4000 annual subsidy for associates with dependents! 401k match - Opportunity to contribute to 401k plan, with 100% company match up to 3%. More ways to earn -Technicians have the opportunity to earn additional performance bonuses & sales incentives throughout the year. Flexible schedules - Sears techs are NOT on call. Year-round work - With Sears large scale and wide product range, Sears cross trains techs and keeps them busy year round Expert training - Best in class training program. Tens of thousands of repair techs trained by Sears Technical Institute in the past 60 years. We will teach you the skills you need to succeed! Peer mentoring - Onboarding buddy and mentor technicians to help you grow your skills Career advancement - Many ways to advance and cross-train to keep growing your career. Our average tenure is >12 years! Easy tools - Sears provides company vehicle, uniforms, specialty tools, mobile phone & industry-leading app that eliminates paperwork and provides technical support Job responsibilities: Repair appliances with high levels of quality and efficiency Deliver delightful customer experience that exceed expectations consistently Provide customers with value-added solutions that help make their home more clean, comfortable & protected Keep company truck well-maintained & organized, and help manage parts efficiently Requirements: High school diploma or general education degree EPA Type II or EPA Universal Mechanical knowledge, including use of testing & repair tools Can follow directions and processes for quality workmanship Can use smartphone, including use for part ordering Background & drug screen Valid driver's license for the state in which you work

Job DescriptionDescription: LDI Mechanical is a leading HVAC Multi-Family Mechanical Contractor. We are looking for full-time, self-motivated and safety-minded individuals to join our team of professionals in the Multi-family HVAC Industry. Job knowledge and experience is not required. Candidates have the opportunity to get paid while learning a career trade. There is plenty of room for advancement for those who want it and work hard. Responsibilities include, but are not limited to the following: Willingness & ability to learn & apply them quickly Ability to work with others in a TEAM environment HVAC experience or Construction experience is a “Plus” - not required Able to work independently and full time, Saturdays included Installing of multi-family HVAC equipment Benefits after introductory period include: Medical, Dental, Vision, Voluntary Life, Voluntary AD&D & 401k, Paid vacation, Sick days and Holidays Requirements: Must have reliable transportation to go to various jobsites in different counties in So Cal Must be authorized to work in the United States Must be able to pass regular drug screen testing and a back ground check

Job Title: Fiber Splicer Department: Construction Reports To: Travis De Blieck Employment Status: Full Time, Salary (Exempt) Compensation: We will determine salary based on skills and experience in relation to the function of the role, as well as equity to any other employees in the same or similar role. Who is Congruex? Congruex was formed in 2016 to take advantage of historic demand for digital connectivity. Our founders are deeply rooted in the industry and have collectively built some of the country's largest communications infrastructures. We design and build digital infrastructure across the nation by providing engineering, construction, and specialty solutions with integrated delivery or as an a la carte service. The work we do enables everything in the modern world to operate, from healthcare and energy to transportation and social interactions. Our vision is to be the best provider of digital infrastructure solutions in the U.S. and our core values of GRIT connect everything we do. Will you join us? Job Summary: Our operating unit provides telecom construction services and we are looking for a Fiber Splicer to join our team. Fiber Splicers perform tasks associated with aerial and underground construction, splicing of fiber optic cable and communication systems for cable television.We are building tomorrow, together. Will you join us? Job Responsibilities (Including, but not limited to): Read and interpret work orders, specifications, engineering drawings and/or cut sheets to determine work to be done in sequence of task. Repair or splice in new line as needed to complete the testing and certification of the project. Install all passive and active devices, enclosures, and term panels. Test fiber optic lines for balanced signal between points-continuity. Pull fiber optic through existing duct package, pull cable through conduit either manually, blowing, or mechanically, and splice and activate underground and aerial lines. Optimize new Nodes and splice in node splits to reduce capacity. Utilize light meters and OTDR accurately. Learn how to safely utilize bucket trucks or climb utility poles to place cables on poles per system design. Close a project by completing production sheets, verifying proper levels after activation, adjust and troubleshoot, as necessary. Ensure that all work considers the safety of the customer, public and compliance with all governmental orders. Maybe required to perform additional duties and tasks as required by the Company. Required Skills & Qualifications: 5+ years of experience in fiber optic splicing A positive can-do attitude and openness to trying things new ways GRIT values - Guts, Reliability, Innovation, and Teamwork Must be able to pass a pre-employment drug screen and background check. Possess a valid driver's license Able to work both individually and in a team environment. Able to communicate professionally Able to lift and/or pull up to 80 pounds several times a day. Must be able to use hand tools such as screw drivers, pliers, drills, and wrenches. Have a high school diploma or equivalent Desired Skills and Qualifications (but not necessary): Bucket truck and other aerial work platforms. Why Work at Congruex? No matter what role you play, you are an important part of the One Congruex Family. We offer: * Medical, Dental & Vision Benefits * 401(k) Program with a company match * Bonus program * The pillars of Congruex culture are GRIT, safety, inclusion, and family. * Paid Vacation All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor. Requirements are representative of minimum levels of knowledge, skills, and/or abilities. To perform this job successfully, the incumbent will possess the abilities or aptitudes to perform each duty proficiently. This document does not create an employment contract, implied or otherwise, other than an "at-will" employment relationship.

Job Title: Fiber Splicer Department: Construction Reports To: Travis De Blieck Employment Status: Full Time, Salary (Exempt) Primary Location: Monmouth, Oregon Compensation: We will determine salary based on skills and experience in relation to the function of the role, as well as equity to any other employees in the same or similar role. Who is Congruex? Congruex was formed in 2016 to take advantage of historic demand for digital connectivity. Our founders are deeply rooted in the industry and have collectively built some of the country's largest communications infrastructures. We design and build digital infrastructure across the nation by providing engineering, construction, and specialty solutions with integrated delivery or as an a la carte service. The work we do enables everything in the modern world to operate, from healthcare and energy to transportation and social interactions. Our vision is to be the best provider of digital infrastructure solutions in the U.S. and our core values of GRIT connect everything we do. Will you join us? Job Summary: Our operating unit provides telecom construction services and we are looking for a Fiber Splicer to join our team. Fiber Splicers perform tasks associated with aerial and underground construction, splicing of fiber optic cable and communication systems for cable television.We are building tomorrow, together. Will you join us? Job Responsibilities (Including, but not limited to): Read and interpret work orders, specifications, engineering drawings and/or cut sheets to determine work to be done in sequence of task. Repair or splice in new line as needed to complete the testing and certification of the project. Install all passive and active devices, enclosures, and term panels. Test fiber optic lines for balanced signal between points-continuity. Pull fiber optic through existing duct package, pull cable through conduit either manually, blowing, or mechanically, and splice and activate underground and aerial lines. Optimize new Nodes and splice in node splits to reduce capacity. Utilize light meters and OTDR accurately. Learn how to safely utilize bucket trucks or climb utility poles to place cables on poles per system design. Close a project by completing production sheets, verifying proper levels after activation, adjust and troubleshoot, as necessary. Ensure that all work considers the safety of the customer, public and compliance with all governmental orders. Maybe required to perform additional duties and tasks as required by the Company. Required Skills & Qualifications: 5+ years of experience in fiber optic splicing A positive can-do attitude and openness to trying things new ways GRIT values - Guts, Reliability, Innovation, and Teamwork Must be able to pass a pre-employment drug screen and background check. Possess a valid driver's license Able to work both individually and in a team environment. Able to communicate professionally Able to lift and/or pull up to 80 pounds several times a day. Must be able to use hand tools such as screw drivers, pliers, drills, and wrenches. Have a high school diploma or equivalent Desired Skills and Qualifications (but not necessary): Bucket truck and other aerial work platforms. Why Work at Congruex? No matter what role you play, you are an important part of the One Congruex Family. We offer: · Medical, Dental & Vision Benefits · 401(k) Program with a company match · Bonus program · The pillars of Congruex culture are GRIT, safety, inclusion, and family. · Paid Vacation All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor. Requirements are representative of minimum levels of knowledge, skills, and/or abilities. To perform this job successfully, the incumbent will possess the abilities or aptitudes to perform each duty proficiently. This document does not create an employment contract, implied or otherwise, other than an “at-will” employment relationship.

Job Title: Fiber Splicer Department: Construction Reports To: Travis De Blieck Employment Status: Full Time, Salary (Exempt) Primary Location: Monmouth, Oregon Compensation: We will determine salary based on skills and experience in relation to the function of the role, as well as equity to any other employees in the same or similar role. Who is Congruex? Congruex was formed in 2016 to take advantage of historic demand for digital connectivity. Our founders are deeply rooted in the industry and have collectively built some of the country's largest communications infrastructures. We design and build digital infrastructure across the nation by providing engineering, construction, and specialty solutions with integrated delivery or as an a la carte service. The work we do enables everything in the modern world to operate, from healthcare and energy to transportation and social interactions. Our vision is to be the best provider of digital infrastructure solutions in the U.S. and our core values of GRIT connect everything we do. Will you join us? Job Summary: Our operating unit provides telecom construction services and we are looking for a Fiber Splicer to join our team. Fiber Splicers perform tasks associated with aerial and underground construction, splicing of fiber optic cable and communication systems for cable television.We are building tomorrow, together. Will you join us? Job Responsibilities (Including, but not limited to): Read and interpret work orders, specifications, engineering drawings and/or cut sheets to determine work to be done in sequence of task. Repair or splice in new line as needed to complete the testing and certification of the project. Install all passive and active devices, enclosures, and term panels. Test fiber optic lines for balanced signal between points-continuity. Pull fiber optic through existing duct package, pull cable through conduit either manually, blowing, or mechanically, and splice and activate underground and aerial lines. Optimize new Nodes and splice in node splits to reduce capacity. Utilize light meters and OTDR accurately. Learn how to safely utilize bucket trucks or climb utility poles to place cables on poles per system design. Close a project by completing production sheets, verifying proper levels after activation, adjust and troubleshoot, as necessary. Ensure that all work considers the safety of the customer, public and compliance with all governmental orders. Maybe required to perform additional duties and tasks as required by the Company. Required Skills & Qualifications: 5+ years of experience in fiber optic splicing A positive can-do attitude and openness to trying things new ways GRIT values - Guts, Reliability, Innovation, and Teamwork Must be able to pass a pre-employment drug screen and background check. Possess a valid driver's license Able to work both individually and in a team environment. Able to communicate professionally Able to lift and/or pull up to 80 pounds several times a day. Must be able to use hand tools such as screw drivers, pliers, drills, and wrenches. Have a high school diploma or equivalent Desired Skills and Qualifications (but not necessary): Bucket truck and other aerial work platforms. Why Work at Congruex? No matter what role you play, you are an important part of the One Congruex Family. We offer: · Medical, Dental & Vision Benefits · 401(k) Program with a company match · Bonus program · The pillars of Congruex culture are GRIT, safety, inclusion, and family. · Paid Vacation All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor. Requirements are representative of minimum levels of knowledge, skills, and/or abilities. To perform this job successfully, the incumbent will possess the abilities or aptitudes to perform each duty proficiently. This document does not create an employment contract, implied or otherwise, other than an “at-will” employment relationship.

Details: The Lead Fiber Splicer is responsible for the installation and maintenance of fiber optic cables. They work on lines, analyzing and optimizing their operation. Underground and aerial fiber optic splice/tester. Responsibilities: Fusion splices SM ribbon and loose tube fiber optic cables, to initiate or terminate various types of fiber optic connectors (ST, SC, LC). Occasionally leads crews, involving supervision of other employees. Installs and tests pressurized and non-pressurized closures on all types and sizes of cable. Analyzes and troubleshoots basic technical problems or issues. Reviews, interprets, and works with various maps, drawings, blueprints and testing documents. Performs daily testing and maintenance of splicing and testing equipment. Performs optical continuity and conformance testing. Makes splicing rearrangements on existing facilities in underground, aerial and building work locations. Adheres to company policies, regulations, procedures, and principles. All other duties as required. Details: Technical Requirements: Minimum of 3 years on the job experience Working knowledge of using various fusion splicing and optical testing equipment including, Alcoa Fujikura, GN Net Test, EXFO, Fitel, Sumitomo, and Viavi. Basic understanding of Outlook, Excel and Word. Ability to read, review, interpret and understand technical documents and blueprints. Ability to climb and work at elevations (e.g., from ladders, poles, lift trucks, etc.). Ability to work in confined spaces. Solid organizational skills. Safety-conscious. Able to travel. Flexible schedule, with hours of day and days of week. Compensation: $25.00-30.00/hr EQUAL EMPLOYMENT OPPORTUNITY POLICY #MTA1 Motive Energy Telecommunications provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race (including traits historically or culturally associated with race, such as hair texture and protective hairstyles), religion (including religious dress and religious grooming), color, age (40 and over), genetic information, disability (mental and physical), medical condition (as defined under state law), national origin (including language use restrictions and possession of a driver's license issued under section 12801.9 of the California Vehicle Code), ancestry, sex (including gender, gender identity, gender expression), sexual orientation, marital status, familial status, parental status, domestic partner status, citizenship status, pregnancy (including perceived pregnancy, childbirth, lactation, or pregnancy-related conditions), military caregiver status, military status, veteran status, or any other status protected by federal, state, or local law. Motive Energy Telecommunications complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Motive Energy Telecommunications expressly prohibits any form of unlawful employee harassment or discrimination based on any of these protected categories. The duties and responsibilities described above are not a comprehensive list and that additional tasks may be assigned. The scope of the job may change as necessitated by business demands.

About the Organization Chroma Systems Solutions, Inc. is a leading designer and manufacturer of power testing instruments and systems including programmable AC Power Source and DC Power Supplies, AC loads and DC Electronic Loads, Digital Power Meters and Automated Testing Systems for applications in LED Lighting, Led Drivers, Aerospace, Defense, Military, Automotive, Medical, Battery, Solar, Marine, and Regulatory Testing. Description JOB TITLE: Repair Services Technician DEPARTMENT: Chroma Service Support REPORTS TO: Repair Services Manager EMPLOYEE TYPE: Full-Time LOCATION: 25612 Commercentre Dr, Lake Forest, CA 92630 SALARY: is commensurate with relevant experience Chroma Systems Solutions, Inc. is a leading designer and manufacturer of power testing instruments and systems including programmable AC Power Source and DC Power Supplies, AC loads and DC Electronic Loads, Digital Power Meters and Automated Testing Systems for applications in LED Lighting, Led Drivers, Aerospace, Defense, Military, Automotive, Medical, Battery, Solar, Marine, and Regulatory Testing. This position will interface with the Service Repair Manager to determine if the issue is within design specification, is a design flaw, or is being used for the proper application to validate under warranty or out of warranty status of repairs, and conduct the repair, calibration, cleanup and final testing of these units. The candidate must be able to absorb and understanding applications such as LEDs, electric cars, fuel cells, power supplies, battery regen systems etc. Working knowledge of Power Instrument Calibration methods and requirements is a must. Working knowledge of inventory management and control is required to perform daily repair tasks. ESSENTIAL DUTIES & RESPONSIBILITIES * Ensure RMA repairs and calibrations are completed per 8-10 day repair goals. * Ability to analyze and diagnose technical issues per designs and specifications of equipment serviced. * Assist Service Repair Manager in material control and planning functions to support Repair Process. * Maintain and improve on department Key Performance Repair Indicators (KPI's). * Handle escalated customer issues replicating customer setup to ascertain problem * Read schematics, apply electrical/electronic principles and troubleshoot instruments to board or component level where applicable to support team of Service Technicians. * Understand and apply AC theory to customer issues involving Chroma AC power test instruments duplicating customer setups to assess issue * Ability to run Calibrations functions on a variety of Chroma instruments and equipment. * Maintain a clean, organized and professional work environment, with Safety as the key focus. * Diligent in solving and following up on customer issues * Effective time management in an effort to meet or beat resolution time * Work within prescribed electrical safety rules established by OSHA and Quality guidelines QUALIFICATIONS * 3-4 years or more experience in AC power electronics, OR * AA or Bachelor's degree with 1-2 years of experience in AC power electronics. * Ability to work in fast moving Repair Lab with lab team. * Working knowledge of electrical instrument calibration for power, medical and battery systems. * Capacity to work under tight or shifting deadlines and adhere to procedures * Professional level verbal and written communication skills. Detail Oriented. * Proficient in MS Office, and basic computer skills. SUPERVISORY RESPONSIBLITIES This is a non-supervisory position. PHYSICAL DEMANDS General office skills and dexterity are required. Must be able to lift 30 pounds. COMPANY BENEFITS * Bonus programs based on individual and company performance * Vacation, sick, bereavement time * Medical, dental, and vision plans for employees and dependents * Life insurance, AD&D, long term disability, and employee wellness programs * 401(k) retirement accounts with immediate vesting of company contributions * Profit sharing programs WORKING CONDITIONS Chroma Systems Solutions is an Equal Opportunity Employer. All qualified applicants will receive equal consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, political affiliation, marriage or veteran status, and will not be discriminated against on the basis of disability. EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Pay Range $25.00 - $28.00 Tags RMA's, repairs, calibrations, high voltage, power instruments Location Commercentre

As a HVAC technician, you will be primarily responsible for performing repairs, maintenance, and diagnostics on a variety of equipment including, but not limited to: air conditioning units, electric motors, fan coils, VAV boxes, pumps, compressors, boilers, cooling towers, chillers, exhaust fans, economizers and thermostats. Responsibilities Campus HVAC Lead Support Respond to routine and complex Commercial HVAC related service calls. Perform inspections and corrective maintenance activities to the university's HVAC systems, including controls and auxiliary components Prepare the parts and tools for each day's activities Work on systems and components that ventilate, heat and cool Troubleshoot motors, fan coils, VAV boxes, boilers, cooling towers, air conditioning, pumps, Chillers etc. Diagnosis, maintenance, repairs, overhauls and operation of all mechanical systems and equipment for commercial HVAC systems Must be able to represent the University in a professional and competent manner Complete and maintain all necessary paperwork and records as required by department Work with external contractors to provide support and may assist with inspections of finished projects Ensure all jobs are compliant with university policy, state, local, and federal laws Maintain clean job site throughout its duration and clean up job site following completion. Maintain safe working conditions for self and others. Ensure proper storage of supplies, tools and equipment Support PM Program Execute preventive maintenance program of campus mechanical systems as primarily defined by department PM program. This will include site inspections, equipment adjustments, filter replacement, condenser cleaning, benchmarking of various parameters etc. Perform other duties as assigned but not limited to : Participate in the annual residence hall turnover activities Assist other trades during specific peak workloads or emergencies Provide guidance and training to lower level HVAC Technicians Execute water treatment program for HVAC and related equipment; This will include pools and fountains Required Qualifications High School Diploma with a minimum 5-7 years' experience in commercial HVAC . Refrigeration EPA R410A certification Demonstrated skills to perform HVAC installation, troubleshooting, repair and maintenance at a technician level 5 or higher. Proven ability to read and understand blueprints, specifications, and schematic diagrams. Knowledge of general trade methods, materials, tools and equipment. Knowledge of mechanical systems, building materials and emergency maintenance. Ability to perform maintenance and repair on TRANE MCQUAY and YORK Chillers Completion of a four year apprenticeship program. Ability to use hand and power tools applicable to the trade. Ability to read, write and speak English in order to communicate with all levels of campus community and business contact. Must be able to work well with other technicians and tradesman. Interpersonal skills to work and collaborate with a diverse group of individuals at all university levels. Excellent time management skills to handle multiple tasks with competing deadlines. Ability to accurately document and track preventative maintenance activities Ability to learn and use enterprise systems and departmental tools. Demonstrated ability to adhere to safe working practices as defined by industry and regulatory standards. Ability to learn and use interpret university policies and procedures. Knowledge of safe driving practices as defined by California DMV Ability to work in a variety of physical environments including on ladders, man lifts etc. with heights of up to 30 feet