Technician jobs in Wakefield, VA

About this Job: Performs angiographic therapeutic and interventional procedures. Responsible for patient management prior to during and after the procedure. Primary Duties and Responsibilities Contributes to the achievement of established department goals and objectives and adheres to department policies procedures quality standards and safety standards. Complies with governmental and accreditation regulations. Administers contrast media into the coronary arteries as directed by a Cardiologist during a cardiac catheterization procedure. Recognizes the effect of pathology and vital signs to determine the amount of pressure of each hand injection. Applies knowledge of the normal physiologic and electrocardiographic sequences of cardiac contraction and recognizes both minor and dangerous arrhythmia. Provides appropriate patient care as required. Functions as a first assistant to the physician by scrubbing independently and aiding in the manipulation and placement of guide wires and catheters. Administers contrast media in accordance with physician instruction. Maintains adequate basic interventional and cardiac supplies. Orders supplies from outside vendors in hospital purchasing system. Assists supervisor with all aspects of inventory control. Maintains all appropriate patient records and department check sheets. Correctly enters patient and supply information into the RIS and/or hospital computer system. Performs angiographic therapeutic and interventional imaging procedures. Performs electrophysiology and ablation procedures. Provides quality patient care and monitoring during all phases of the procedure in accordance with physician instructions and established policy. Has knowledge of all equipment inventory and location of supplies. Operates emergency equipment safely. Performs hemodynamic physiologic patient monitoring recording calculations of cardiovascular procedures. Responds to on-call emergencies in accordance with department policy. Responsible for post-procedural duties including observation and management of catheter and/or device insertion site and patient discharge instructions. Provides patient transportation and communicates patient care status to receiving care unit. Responsible for pre-procedural duties such as sterile tray preparation procedural patient education and confirmation of required lab work and patient medical history including indications for the study and all previous related exams. Safely operates all imaging equipment (for example digital equipment pressure injectors processors rapid film changer and cine) to produce high-quality diagnostic images in accordance with departmental policy. Schedules and maintains orderly patient flow. Participates in meetings and on committees and represents the department and hospital in community outreach efforts. Participates in multi-disciplinary quality and service improvement teams. Minimal Qualifications Education Satisfactory completion of an AMA-approved school of Radiologic Technology of at least 2 years duration. required Experience 2 years experience in diagnostic radiology required Experience in interventional radiology/cardiac catheterization or equivalent required Licenses and Certifications ARRT certification or registration. required Radiology Technologist license in the State of Maryland. required ACLS - Advanced Cardiac Life Support Certification or eligibility required CPR - Cardiac Pulmonary Resuscitation (includes BLS and NRP) for healthcare providers from either the American Heart Association (AHA) or American Red Cross within 90 Days required Additional unit/specialty certifications may vary by department or business unit. Knowledge Skills and Abilities Basic computer skills. Verbal and written communication skills. This position has a hiring range of : USD $42.82 - USD $78.27 /Hr.

Securitas Technology and Solutions groups are experiencing tremendous success, and we currently have an Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on Securitas Technology products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. Securitas Technology is a leading, global provider of integrated security and facility solutions that contain best-in-class products and award-winning services for an organization's unique needs. Securitas Technology security solutions include product and service outsourcing that integrate cross-disciplinary functions into comprehensive technology-centered customer solutions on a cloud-based platform spanning hardware and software capabilities. Position Description: Installs intrusion, fire, CCTV, and access control security systems. Run electrical wiring in attics, crawl spaces, and other confined spaces, which can include drilling, trenching and aerial runs. Complete all wiring, connections, and equipment installations ensuring that security systems are complete and satisfy customer and contractual requirements. Assists and interfaces with the Installation Team Lead or Project Manager regarding on-site scheduling of work activities and timely delivery of equipment. Conducts tests to ensure all newly installed systems and component devices are operational. Troubleshoots new system installations to ensure proper functioning and to ensure system meets local, county, state or federal codes; legal and/or insurance requirements. Presents a professional image both in personal and vehicle appearance. Performs work assignments in a safe manner and within specified cost limits. Promotes, builds, and maintains good customer relations and assists with contract retention. Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Electronic Security policies and procedures including all safety requirements. Keeps abreast of changes and new developments in products and technology. Attends and completes training programs as requested. Job Requirements: MUST HOLD 3 or more years' experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems. High School Diploma or equivalent Vocational/Technical Degree in electrical, security, or computer systems preferred. NICET Certification preferred. Lenel, Pro-Watch, Software House, Picture Perfect certifications preferred. Bosch, Honeywell, Radionics, or DMP system knowledge preferred. Edwards/EST, Simplex, or GE/Mirtone system knowledge preferred. IP Video and IT experience preferred. Climb ladders that extend up to 24 ft. in height. Carry items up to 75 pounds. Ability to work on-call on a rotational basis covering after hours & weekend emergency calls. A valid state driver's license, without restrictions, is required. The following states require specific state security licensing requirements: Washington, Oregon, and Oklahoma. Check with local branch for licensing requirements. Benefits: Highly competitive salary Company Vehicle Company Cell Phone Medical, Dental, Vision, and Life Insurance Company Paid Short Term Disability 401K with 60% Match Paid vacation, holiday, sick, and personal days Educational Assistance Exceptional growth opportunities We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Apex Systems is currently hiring for an AV Deployment Technician with our healthcare client. The AV Deployment Technician will be part of a greater deployment project across the entire healthcare enterprise. This individual will be responsible for installing and troubleshooting AV hardware/software; setting up AV equipment, loading software, cable management, and installations; and programming and configuring AV devices and equipment. If you are interested in learning more, apply TODAY! Qualified candidates will have the following experience and skills: 1+ year experience in IT within Helpdesk/Desktop support Prior AV experience is highly preferred Prior Cisco AV install/configuration experience Must have reliable transportation Location: Falls Church, VA, with travel to nearby sites Onsite expectation: 100% onsite Pay range: $28.12/hr If you are interested, please apply here or email an updated copy of your resume to **********************. Apex Benefits Overview: Apex offers a range of supplemental benefits, including medical, dental, vision, life, disability, and other insurance plans that offer an optional layer of financial protection. We offer an ESPP (employee stock purchase program) and a 401K program which allows you to contribute typically within 30 days of starting, with a company match after 12 months of tenure. Apex also offers a HSA (Health Savings Account on the HDHP plan), a SupportLinc Employee Assistance Program (EAP) with up to 8 free counseling sessions, a corporate discount savings program and other discounts. In terms of professional development, Apex hosts an on-demand training program, provides access to certification prep and a library of technical and leadership courses/books/seminars once you have 6+ months of tenure, and certification discounts and other perks to associations that include CompTIA and IIBA. Apex has a dedicated customer service team for our Consultants that can address questions around benefits and other resources, as well as a certified Career Coach. You can access a full list of our benefits, programs, support teams and resources within our ‘Welcome Packet' as well, which an Apex team member can provide. EEO Employer Apex Systems is an equal opportunity employer. We do not discriminate or allow discrimination on the basis of race, color, religion, creed, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), age, sexual orientation, gender identity, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, disability, status as a crime victim, protected veteran status, political affiliation, union membership, or any other characteristic protected by law. Apex will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable law. If you have visited our website in search of information on employment opportunities or to apply for a position, and you require an accommodation in using our website for a search or application, please contact our Employee Services Department at ******************************** or ************. Apex Systems is a world-class IT services company that serves thousands of clients across the globe. When you join Apex, you become part of a team that values innovation, collaboration, and continuous learning. We offer quality career resources, training, certifications, development opportunities, and a comprehensive benefits package. Our commitment to excellence is reflected in many awards, including ClearlyRated's Best of Staffing in Talent Satisfaction in the United States and Great Place to Work in the United Kingdom and Mexico.

$5,000 Sign-On Bonus Available Receive 17% Weekday Nights, 26% Weekend Nights and 15% Weekend Day shift differentials Minimum Offer $ 22.49/hr. Maximum Offer $ 33.74/hr. Compensation Disclaimer Compensation for this role is based on a number of factors, including but not limited to experience, education, and other business and organizational considerations. Department: Labor and Delivery FTE: 0.90 Full Time Shift: Days Position Summary: Under the direction of a Registered Nurse, the Surgical Tech contributes to the company's mission and vision by assisting with the provision of safe and effective nursing care in accordance with a defined scope of practice within the operating room, and maintaining an understanding and knowledge base for the function of each instrument for multiple services. This may include direct patient care and observation, scrubbing and assisting the surgeon at the operative field, surgical room turnover between cases, act as a preceptor and consistent collaboration with the Registered Nurse in clinical decision making. The services covered may include but are not limited to: Vascular, Cardiac, Neurosurgery, Robotics, Spine, Orthopedics, Urology, General Oncology, Gynecology Oncology, Ear Nose and Throat, General, Eyes, Burns, Plastics, Gynecology, Dental. Ensure adherence to Hospitals and departmental policies and procedures in a Level I Trauma Hospital. Patient care assignment may include Neonate, Pediatric, Adolescent, Adult and Geriatric age groups. Detailed responsibilities: * EQUIPMENT & SUPPLIES - Work with staff team to gather necessary supplies, equipment and instruments * EQUIPMENT - Set up tables, instruments and supplies required for specific operations * PATIENT CARE - Assist in preparing and draping of patient and operating area; prepare and maintain sterile field for surgical procedures * SPECIMENS - Assist in maintenance and care of specimens; prepare specimens for laboratory analysis * EQUIPMENT & SUPPLIES - Decontaminate all equipment, instruments, and supplies * DEVELOPMENT - Enhance professional growth and development through participation in educational programs, reading current literature, attending in-services, meetings and workshops * PATIENT SAFETY 1 - Follow patient safety-related policies, procedures and protocols * PATIENT SAFETY 2 - Demonstrate proactive approach to patient safety by seeking opportunities to improve patient safety through questioning of current policies and processes * PATIENT SAFETY 3 - Identify and report/correct environmental conditions and/or situations that may put a patient at undue risk * PATIENT SAFETY 4 - Report potential or actual patient safety concerns, medical errors and/or near misses in a timely manner * PATIENT SAFETY 5 - Encourage patients to actively participate in their own care by asking questions and reporting treatment or situations that they don't understand or may "not seem right" * PATIENT CENTERED MED - Adhere to and promote the core expectations of the Patient Centered Medical Home or Patient Centered Specialty Practice as applicable * SUPPLIES - Obtain supplies, instruments, and other required items for the surgical case(s); arrange the supplies and instruments in case carts according to set procedures ensuring accuracy and proper documentation; ensure sterility of instrumentation; keep Operating Rooms neat, clean and stocked * STERILE TEAM - Function as a member of the sterile team in donning gown and gloves, creating and maintaining a sterile field, and issuing instruments to surgeons * COMMUNICATE - Communicate updates or necessary changes for the surgeon preference card to the appropriate coordinator * ASSIST - Assist with maintaining equipment/instruments in proper working order; assist with table equipment, patient positioning, and application of immobilization devices and dressings * COMMUNICATION - Verify implants and communicate special request for procedures * SUPPLIES - Return unused supplies/instruments/equipment to appropriate storage area * INSTRUMENTS - Separate and load used instruments into case carts for delivery to sterile processing; report instrument malfunction and place instruments in the appropriate location to be sent for repair; transport contaminated instruments from OR per hospital policy; covered and labeled as biohazard material; collaborate with sterile processing to prioritize instrument turnover * PROCEDURES - Assist with urgent/emergent procedures * INSTRUMENTS - Utilizing Instrument tracking system by scanning instruments to specific location * COMMUNICATION - Report discrepancies, problems, and concerns to management using proper chain of command Qualifications Education: Essential: * High School or GED Equivalent * Program Graduate Education specialization: Essential: * Surgical Technician Experience: Essential: Nonessential: Bilingual English, Spanish, Keres, Tewa, Tiwa, Towa, Zuni, or Navajo 1 and 1/2 year (18 months) directly related experience Credentials: Essential: * CPR for Healthcare/BLS Prov or Prof Rescuers w/in 30 days * Certification of Surgical Technologists Physical Conditions: Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly to move objects or people. Physical Demand requirements are in excess of those for Medium Work. Working conditions: Essential: * Sig Hazard: Chemicals, Bio Hazardous Materials req PPE * May be required or is required to perform on-call duties Department: Clinical Nursing Support

We are currently working with a Washington DC client looking for a Systems Technologist to join their team. This is 100% onsite role in DC (near Chinatown, zip code 20223). Local candidates only. This is a 12-month initial contract on W2 with the potential to extend or convert to FTE. Additionally, this is a cleared role so all candidates must be USC with an active Public Trust Clearance. This position involves close supervision, detailed instructions, and constant performance checks. The technician will provide post-sale installation and maintenance support for communication products, including hardware installations, site equipment audits and customer service response in a break-fix environment. Primary Focus: Mobile and station work associated with Conventional, SmartNet Trunking, and Paging Systems for single-site customers. Key Responsibilities: Programming of mobile and portable radios, and infrastructure (training provided) Organize and pack radio kits for shipment Data entry into MS Excel and MS Word forms, including barcode scanning Equipment handling: Unloading/loading pallets Pick and pack radio system parts/kits per customer specifications Inventory management: Assist with stock take and maintain subscriber inventory accuracy Receiving & dispatching subscriber goods PC Desktop Support/System Admin Level 1 Required Knowledge & Skills: Familiarity with basic communication concepts Basic understanding of RF, telecommunications, and computer networking General/intermediate knowledge of computer hardware and applications for troubleshooting Ability to use basic electronic level meters (DVM, Scope, Wattmeter) Education & Experience: Associates Degree, Technical Certificate, or Military Training 2 years technical work experience

Are you ready to make a direct impact in the pharmaceutical manufacturing space? As a Process Equipment Technician, you'll play a critical role in keeping cutting-edge production lines running smoothly, ensuring life-changing medicines reach the people who need them. This is your chance to apply technical expertise in a high-impact environment where every detail counts. Why You Should Apply Be part of a team manufacturing products that truly improve lives Work hands-on with advanced granulation, drying, and milling technologies Gain exposure to cross-functional collaboration in engineering, quality, and production What You'll Be Doing Install, maintain, troubleshoot, and optimize process equipment for granulation and downstream operations Perform preventive maintenance, calibration, and repairs on complex systems Support equipment qualification (IQ/OQ/PQ) and process improvement projects Collaborate with engineers on optimization, upgrades, and investigations Document all work in compliance with cGMP standards About You Associate's degree in Mechanical, Industrial, or Chemical Engineering Technology preferred Hands-on experience with solid dosage / powder manufacturing equipment Skilled at troubleshooting mechanical, pneumatic, and electrical systems Knowledge of process qualification and regulatory documentation requirements Ability to interpret P&IDs, wiring diagrams, and schematics How To Apply We'd love to see your resume, but we don't need it to have a conversation. Send us an email to *********************** and tell me why you're interested. Or, feel free to email your resume. Please include Job#19534

Diesel Technician 30.00-40.00 WOODBRIDGE, VA Description $10,000 Sign on Bonus (NEW) Wages have been increased! This is a GREAT Job! Apply Now! Manassas, VA Hourly Pay: $30.00- $40.00 per hour (based on experience) Schedule:1st Shift Monday- Friday 8:00am-4:30pm Proficient in Truck diagnostic software. Reefer knowledge a plus but not required. Knowledge in truck powertrain systems Aim's company culture has been nationally recognized by Newsweek and The Wall Street Journal. We offer high, consistent pay in a stable work environment. Aim has spent 40 years building a workplace where employees feel empowered, valued, and respected every day! Benefits for Employee & Family: Anthem Blue Cross/Blue Shield Coverage 401K and Company Match Paid Time Off Company Paid Life Insurance Short-Term/Long-Term Disability Generous Employee Referral Bonuses Click to apply or contact a recruiter with questions by calling ************ Pay Range: 30.00-40.00 per_hour, General Benefits: Requirements 2+ years diesel mechanic experience required Service/Maintain Heavy Duty trucks Must Have Tools/Toolbox CDL and/or ASE Certifications preferred. Aim Transportation Solutions is a Top 30 Logistics Company! We are family-owned and financially strong. Aim Transportation Solutions has been in business for over 40 years and has grown to 1,000+ employees providing service nationwide. For more information about Aim Transportation Solutions, visit *************** #aimman #mechjob Date posted: 12/16/2025

We are seeking a Site Access & Compliance Coordinator to serve as an on-site representative for a leading workforce access and compliance platform used in mission-critical construction environments. This position ensures seamless site entry, credential verification, workforce onboarding, and ongoing compliance monitoring. The Coordinator functions as a vital liaison between on-the-ground operations and centralized support, providing training, real-time support, and first-line issue resolution for both workers and management personnel. Key Responsibilities Access Control & Credential Verification · Monitor and enforce site access using digital badging and credentialing tools · Ensure all personnel are properly verified and compliant before entry · Manage visitor access protocols, including temporary badging · Maintain order and protocol at gates and turnstiles Onboarding & Training · Train workers and subcontractors on platform usage · Support documentation intake and digital account setup · Educate workers on the use of temporary access credentials and vehicle passes · Assist in multilingual onboarding when necessary Technical Support & Escalation · Act as the first point of contact for on-site access or credentialing issues · Troubleshoot minor technical concerns and resolve access mismatches · Collaborate with centralized operations and support teams to resolve issues · Follow a structured escalation path for unresolved matters Customer Engagement & Field Feedback · Represent the platform and its values with professionalism and courtesy · Address service-related concerns and provide clear communication · Capture user feedback from the field to inform product improvement Performance Expectations · Ensure consistent, protocol-compliant access to the job site · Minimize delays through effective onboarding and training · Rapidly respond to and resolve credential or access-related issues · Uphold high standards of professionalism and customer service

Looking for a Technical Business System Analyst in the Management Information Systems team (MIS) that would support and build enhancements within the ServiceNow platform, as well as any homegrown inventory, audit, and compliance portfolio to provide functional & technical support to internal business customers. This person will help understand functional requirements to provide lean and effective solutions using the appropriate technology stack in an agile manner. They will also support other teams in testing, implementation, and production support where needed while following all internal processes for development and operations. Key Responsibilities: Manage backlog, gather requirements, design, test & support various implementations, enhancements, and upgrades on the ServiceNow platform with minimal supervision. Actively participate and collaborate in a mature operational model and help enhance processes. Collaborate tasks with vendor technical support, other internal systems teams, and project development staff to ensure successful COTs/SaaS integration implementation within the enterprise Manages the ServiceNow/UCMDB/Flexera Discovery infrastructure, including schedules, credentials, mid-servers and patterns Help design, test, and support RESTful web services, Linux and scripting environments, integrations, database, and server development Support software and web architecture requirements analysis, testing and maintenance Leverage deep functional knowledge to independently design and develop smart and innovative solutions to satisfy business requirements Develop deep understanding of tie-ins with other systems and platforms within the corporate systems landscape Ensure key documentation is completed to a high standard and present technical information to senior management in a concise manner Hands-on ability to build quick prototypes/visuals to assist with high level product concepts and epic stories Write and maintain strong unit, functional and integration tests ready to be automated in a continuous integration environment Active participation in evolving our application platform to meet scaling, security, and compliance need Required Qualifications: 5+ years of hands-on experience working with multiple ServiceNow modules like ITSM, Change-Incident-Problem Management, Asset Management, CMDB, Release Management, GRC, or Vendor Risk Management. Experience in working on RESTful web services, Linux and scripting platforms and technical audit platforms is preferred Experience in Software Asset Management (SAM) / IT Asset Management (ITAM) domain for both on-prem and SaaS software platform, USU, SNOW License Manager or Client Asset Manager Excellent analytical, problem-solving skills with clear and concise communication - verbal and written Minimum of 8 years of related experience with a bachelor's degree in computer science (or equivalent work experience); or 6+ years and a master's degree in computer science (or equivalent work experience) Nice to have: Certifications in ServiceNow administration is preferred Software Asset Management (SAM) certification is a plus Advanced Microsoft Excel, PowerPoint knowledge is a plus Exposure to collaboration tools such as SharePoint, Confluence and Jira Able to perform the complete system life cycle using Agile Engineering and Agile Scrum Methodology preferably in JIRA Familiar with VMware, AIX, KVM virtualization and Docker, Kubernetes app virtualization Strong Linux, OS skills & Web UI experience as an analysis

Title: Maintenance Technician Pay: $26-30/hr Must Haves: - High school diploma or GED - 4+ years of experience in a commercial property setting - Strong communication and problem-solving skills - Computing skills in Excel, Work and Outlook - Must have a valid driver's license and positive driving record - Ability to meet physical demands Nice to Have Skills & Experience: - Technical, vocational or on-the-job training in at least one of the following areas: HVAC, electrical, mechanical, process controls, mechanical power transmissions, painting, plumbing, carpentry or engine repair

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at Notice: Know Your Rights: Workplace Discrimination is Illegal Notice: Pay Transparency Nondiscrimination (English) Aviso: Transparencia en el Pago No Discriminacio´n (Spanish) *:** Airbus Aerosystems Kinston is looking for a *Tooling Maintenance Technician* to join our Tooling department based in Kinston, NC. *Meet the Team:* Our team at Airbus Aerosystems Kinston manufactures crucial aircraft components. On the shop floor you'll be surrounded by individuals who are passionate about aviation and skilled in areas like electrical, structure and quality. Join our team and help build the next generation of aircraft. *Your Working Environment:* The Airbus Aerosystems Kinston facility sits at the forefront of aerospace manufacturing, specializing in the production of large, advanced composite aerostructures. Our team builds critical components for the state-of-the-art Airbus A350 XWB, including the composite center fuselage and wing spar. How We Care for You:* Financial Rewards: Competitive pay, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan (“ESOP”) Work/Life Balance: Paid time off including personal time, holidays and a paid parental leave program. Health & Welfare: Comprehensive insurance coverage including medical, prescription, dental, vision, life, disability, Employee Assistance Plan (“EAP”) and other supplemental benefit coverages. Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path; as well as the opportunity to participate in accelerated development programmes; and both national and international mobility. Your Challenges:* Dismantles, moves, assembles, installs, and repairs industrial machinery and equipment according to layout plans, blueprints, drawings, or verbal instructions. Dismantles equipment and machines using hammers, wrenches, crowbars, and other hand tools. Moves machinery and equipment using hoists, dollies, rollers, and trucks. Assembles and installs equipment such as conveyors and tram rails using hand and power tools. Constructs foundations; aligns machines; performs scheduled inspection and maintenance. Sets up and operates machine tools and fabrication machinery to rework or make new parts. Perform root/cause analysis in support of reliability processes, and collaborate with vendors, engineering, team leader, customer, other crafts and management to solve equipment problems and develop corrective action. Rework and maintain tools of all types and materials. Perform routine minor machine maintenance as part of their daily work duties (e.g., replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties). Repairing and building of lay-up tools. Your Boarding Pass: * Must be willing and able to work any shift Workkeys Assessment completion OR High School Diploma/GED Physical Requirements: * Vision: Daily able to see and read computer screens and other electronic equipment with screens, able to read documents, reports and engineering drawings. Hearing: Daily able to participate in conversations in person and via teleconference or phone and to hear sounds on the production floor including safety warnings or alarms. Speaking: Daily able to speak in conversations and meetings, deliver information and participate in communications. Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors):Rarely able to operate most office and personal electronic equipment and some tools including production tools such as hydraulic lifts. Carrying: Weekly able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs. Lifting: Weekly able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs. Pushing / Pulling: Several times a month able to push and pull small office furniture and some equipment and tools. Sitting: Daily able to sit for long periods of time in meetings, working on the computer. Squatting / Kneeling: Daily able to squat or kneel to retrieve or replace items stored on low shelving. Standing: Daily able to stand for discussions in offices or on the production floor. Travel: Once or twice a year able to travel independently and at short notice. Walking (include routine walking such as to a shared printer to retrieve documents): Daily able to walk through office and production areas including uneven surfaces. Personal Protective Equipment required: Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing Protection, Respirators/Masks, and/or Protective Gloves as required by site and/or customer site Administrative position only PPE required: Steel-toed shoes are required for all shop floor visits, appropriate hearing/eye protection may also be required when visiting the shop floor. Take your career to a new level and apply online now! A full job description will be provided to candidates who progress to the interview stage or any candidate upon request. Equal Opportunity: All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status As a leader in our field, Airbus provides relocation assistance for qualified positions and a comprehensive compensation and benefits package. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. NOTE: Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. ****Company:**** Airbus Aerosystems Kinston, Inc *Employment Type:* US - Direct Hire *Experience Level:* Professional *Remote Type:* On-site *Job Family:* Production means/Maintenance ------ Job Posting End Date: 12.30.2025 ------ Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to .

- Datacenter Technician ( RunOps ) Cabling & Termination The Fiber Technician will mount and install racks, patch panels, fiber optic and hardware. Install grounding for racks, equipment and cable as required. The Fiber Technician performs testing: continuity test horizontal and riser cable; use of volt-ohmmeter; troubleshoot opens, crosses, shorts, and transpose pairs on horizontal and riser cable; use a tone set. The Fiber Technician installs LC, SC, ST, FC, FDDI, SMA and MPO/MTP connectors, for both multi-mode & single-mode fiber The Fiber Technician will terminate simplex & duplex jumper cord The Fiber Technician will terminate & breakout outside plant fiber The Fiber Technician will terminate indoor tight buffered multimode and single-mode fiber The Fiber Technician will install fan out kits including buffer tube The Fiber Technician will calculate end to end loss budgets in accordance with TIA/EIA standards for multimode & single-mode fiber The Fiber Technician will fully complete all paperwork accurately and on time specifically: timesheets, material transfers, work orders, change orders, tool transfers and others as required Additional responsibilities Able to provide onsite support after business hours as part of the on-call schedule. 25% travel required for this position within US location Testing The Fiber Technician will test using an OTDR, Fluke & EFXO The Fiber Technician troubleshoots using an OTDR to identify and correct problems end to end, and Network wide Splicing The Fiber Technician will perform mechanical splicing with all types of fiber cable The Fiber Technician performs building entrance splices, maintenance space, and direct buried splices Education, Certification, License, And Skill Requirements Must possess a High School diploma or GED equivalent Must be proficient at terminating all connector types and methods for SMF and MMF systems (Unicam, anaerobic, heat-cure) Must have Testing & Troubleshooting MMF & SMF systems experience (OTDR & PMLS) Prefer 3-5 years of experience in Fiber Prefer Industry Certifications (Corning/FOA/BICSI) Prefer Mechanical and Fusion Splice experience Prefer OSP / Confined Space Entry experience (splicing) Must be able to use the following trade Tools: Screwdriver (regular and Phillips), torpedo level, tape measure, snips (with belt sheath), pliers (needle nose and channel locks), hammer, wrench set, cable stripper, flashlight and gloves. Punch tool with 110 block and 66 block blades, tone set, 6/8 position combo crimp tool, and Krone/3M/BIX. Disclaimer HCL is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to ****************** for investigation. Compensation and Benefits A candidate's pay within the range will depend on their work location, skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year.

Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. Factory Location: Hollis, ME Compensation: $39.75/hour Shift differential : 6%-8% of base hourly rate paid for applicable hours worked Schedules: Days: M-F Day shift & Nights: 5:00 pm - 5:00 am, 2/2/3 rotating schedule Must be able to train on 1st shift for approximately 3 months before moving to schedule Relocation: Up to $7500 relocation package offered for out of state, restrictions apply Benefits of working for Primo Brands: Health Benefits: Medical, prescription, dental, vision, flexible spending account (FSA), dependent care flexible spending account (FSA), health savings account (HSA) Retirement/Investing: 401K with a 5% match, Employee Stock Purchase Plan (ESPP) Insurance: Employee Life Insurance, short and long-term disability, critical illness, hospital indemnity, accident insurance, spouse/domestic partner/child life insurance, accidental death and dismemberment Other great benefits: Employee discounts, save on auto, home, and pet insurance, tuition reimbursement, paid vacation and sick time, 9 paid holidays and 3 paid floating holidays, paid leave for when you have a baby, adopt a child, or become a foster parent, legal services, identity theft protection, employee assistance program (EAP), adoption reimbursement benefit, FEDlogic, commuter benefits Responsibilities: - Performs routine preventative and corrective maintenance and testing on equipment Perform maintenance tasks to include - repairing and improving, from minor rebuilds to major overhauls on all equipment. - Identify processing waste reduction opportunities and assist in reduction projects. - Participate in preventative maintenance program to help reduce costs of operations through PM optimization. - Dismantles, cleans, repairs and tests electrical, electronic and mechanical components to determine component-level failure - Support equipment installations, retrofits and upgrades to include vendors and contractors - Communicate, coach and train employees to continuously improve team's ability to respond to equipment failures and loss of production. - Actively support NCE through SLC DOR, DER, GSTD's - DMAIC projects and Debriefs or shift handoffs - Maintains preventative maintenance logs and accurate records of all testing and repairs - Recommends equipment to be included in preventive maintenance programs. Perform Preventative Maintenance task to identify all potential mechanical and electrical issues with equipment throughout the plant. Rebuild worn-out, but reusable, pieces of equipment, such as gearboxes for scheduled PM's. - Troubleshoot/ investigate and repair all mechanical, electrical, pneumatic, and utility systems including chillers, air compressors etc. Eliminates problems from recurring utilizing the Breakdown Analysis process - Communicates directly with equipment suppliers, contractors and vendors as necessary - Areas of responsibility will include but are not limited to -Production support - Mechanical Room- Water Processing - Boiler Room -Waste Water Treatment- Water Chemical Treatment Program Qualifications: Three or more years proven maintenance experience in a manufacturing environment Prior experience with high and low pressure compressors, chillers, water treatment, boilers is preferred Strong technical knowledge of compressed air systems (pneumatics), electrical systems, hydraulics and water processing is preferred Knowledge of bottling equipment, PM programs and SAP system preferred Successfully demonstrates strong mechanical abilities Strong communication and interpersonal skills for interaction with all employees. Must have electrical knowledge of single and three phase power including the ability to diagnose and replace electric motors Must be able to work and accomplish projects with little to zero supervision Must be able to foster and build a team-work environment Communicate effectively with various support groups, supervisors, and team members Maintain a high level of professional and organizational ethics and image with all plant and outside personnel Able to read, interpret and analyze computer generated reports Perform all tasks with extreme accuracy Must be able to do physical inspections, (i.e. climbing, reaching, extending) Must be proficient with mechanical drawings and OEM technical prints for parts identification Proficient computer navigation skills, including the use of Microsoft Office applications Available for call-ins or to cover all shifts to support production teams as required Works together with Safety department to achieve a zero injury workplace Must display a positive mental attitude and be open to a fast paced ever changing work environment Ability to pass a Ramsay aptitude test Candidates must possess strong English language skills to effectively communicate with customers and provide exceptional service. Proficiency in English is essential for understanding customer needs, resolving inquiries, and collaborating with team members . Primo Brands' established portfolio includes billion-dollar brands Poland Spring and Pure Life , premium brands like Saratoga and Mountain Valley , regional leaders such as Arrowhead , Deer Park , Ice Mountain Ozarka , and Zephyrhills , purified brands, Primo Water and Sparkletts , and flavored and enhanced brands like Splash and AC+ION . Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come. Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law.

Job Title: Data Center Technician Structure: Contract-to-Hire (6 months) Pay: 22/hr We are seeking a hands-on Data Center Technician with strong mechanical aptitude and foundational hardware knowledge to support break/fix operations within a fast-paced environment. This role is ideal for someone who is passionate about computer hardware, learns quickly, and can work independently while earning trust from the broader team. You will be responsible for diagnosing and resolving hardware-related issues, correcting ticketing errors, and ensuring accurate documentation of steps taken. This position offers the opportunity to grow into a full-time role for strong performers. Key Responsibilities Perform regular break/fix work on servers and related data center hardware. Troubleshoot and resolve hardware failures, ticketing errors, and incomplete or missing information. Conduct basic technical testing, including ISO/isolation testing and hardware diagnostics. Ensure all work is appropriately logged and follows established processes. Work independently while communicating effectively with the broader operations team. Follow safety standards, internal procedures, and data center best practices. Preferred Background: Strong hands-on experience with computer hardware-Geek Squad, PC building, or similar backgrounds strongly encouraged. Solid baseline understanding of computer components, system assembly, and technical fundamentals. Ability to learn quickly, adapt to feedback, and work with minimal supervision. Strong judgment and reliability; earns trust rapidly. Comfortable receiving and responding to constructive feedback. Candidates newer to the data center world to bring fresh perspectives and adaptability. Qualifications 1-3+ years of hands-on hardware or mechanical experience (professional or personal). Experience with troubleshooting and basic hardware diagnostics. Familiarity with isolation testing and technical procedures is a plus. Strong communication and documentation skills. Ability to work in a physically active environment (lifting, standing, navigating data center aisles). Eight Eleven Group provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, national origin, age, sex, citizenship, disability, genetic information, gender, sexual orientation, gender identity, marital status, amnesty or status as a covered veteran in accordance with applicable federal, state, and local laws.

at Whaley Foodservice ***HIRING IMMEDIATELY!!!**** ***Sign On Bonus Available for Qualified Service Technicians*** Whaley Foodservice, LLC is one of the largest commercial kitchen equipment repair service companies in the Southeast comprised of over 600 employees located across 31 geographically dispersed locations.Visit "Whaley Careers" to find your place to grow. ********************************* Pay Rate: $31.00-39.00/hour* At Whaley we know people are vital to our success. We offer a competitive salary, on-call pay, and generous benefits including Sign-On Bonuses for Experienced Technicians Company Vehicle | Mobile Device | Uniforms Meters & Test Equipment Industry Certification 401k & Profit Sharing Paid Holidays & Vacation Medical & Dental Benefits Short-Term Disability | Long-Term Disability Insurance (company paid) Life Insurance (company paid) To learn more about current opportunities, visit Whaley Careers: ********************************* Summary: The Service Technician II provides maintenance, service, and repair for commercial cooking equipment and commercial refrigeration i.e. grills, fryers, ovens, ice machines, reach-in and walk-in coolers, freezers, etc. Details: Diagnoses, troubleshoots, and repairs commercial cooking kitchen equipment, refrigeration. Communicates status updates for part order(s) and repairs with branch support and customer. Completes service calls accurately and timely. Audits truck stock to ensure required parts are stocked. Ensures service vehicle, tools, and uniforms are consistent with Whaley standards of safety. Meets on-call requirements. Required Education | Experience Three years of experience in commercial kitchen repair and or refrigeration. Must be 18 years of age. Completion of a satisfactory background check and drug screen is required. Valid Driver's license and driving record that aligns with our safety standard. Skills and Abilities Ability to work independently Ability to accurately diagnose and troubleshoot: an automotive, electrical, installation, and mechanical background is a plus. Journeyman License and or CFESA certification not required but would be a plus. Strong attention to detail. Excellent communication and soft skills. Good driving record Whaley Foodservice is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Applicants must have an Active Top Secret/SCI US Government clearance with polygraph. Note: US Citizenship is required to maintain a Top Secret/SCI clearance with polygraph. The contractor will be responsible for the proper repair and maintenance for a large fleet of forklifts and related equipment of various brands (predominately Raymond). The forklift fleet consists of a variety of electric, gas-, and diesel-powered units designed for interior and exterior building use. The contractor shall be responsible for maintaining a comprehensive maintenance schedule, obtaining approval for the schedule from appropriate government focal points, and adhering to the schedule in order to ensure all forklift units are mechanically ready for use and safe to operate. The contractor shall manage a spare parts inventory and make all levels of repairs when necessary. The contractor will also be responsible for repairing and maintaining pallet jacks and carts. Duties/Tasks and Responsibilities Schedules, prioritizes, inspects, and repairs forklifts, pallet jacks, and carts Determines, within prescribed value range, when a major component/ assembly is to be repaired, rebuilt, replaced or discarded Responsible for assisting with the purchasing of parts and services Required to maintain fleet and training vehicles; and prepares written estimates on cost and labor time for corrective repairs. Interacts with customers to keep them informed of status of vehicles, repairs needed, etc. Based on assignment, independently performs corrective maintenance and repairs to the fleet. Informs government focal point if a task cannot be safely performed alone. Inspects, diagnoses and isolates vehicle and equipment malfunctions; troubleshoots, traces and locates defects and/or causes of mechanical problems to determine type and extent of necessary repairs. Repairs all assigned forklifts and equipment to ensure they are safe and dependable. Inspects and tests equipment for mechanical defects, and replaces worn parts. Removes, replaces, adjusts, or cleans defective parts or components Perform oil changes, check fluids, diagnose tread wear, charge and repair batteries and trouble-shoot problems. Inspects/replaces hydraulic lines/hoses as needed. Ensure braking and electrical systems are optimal. Utilizes appropriate techniques and procedures in accordance with manufacturer's specification Identifies necessary parts, equipment and supplies needed to complete repair or preventative check. Road tests vehicles during and occasionally upon completion of maintenance/repair work. Responds to emails and telephone calls. Performs other related duties as required or as directed by Supervisor regarding forklift and equipment maintenance. Knowledge, Skills, and Abilities Extensive knowledge of the operating systems used in forklifts and associated hydraulic, pneumatic, and electrical systems. Extensive knowledge of the practices and tools used in the maintenance and diagnostics of forklifts and equipment. Considerable knowledge of computer, electrical, transistorized and other non-mechanical systems and how they tie-in with and affect the operation of mechanical systems. Considerable knowledge of the full range of tools, equipment, test procedures and practices used in the repair and preventative maintenance of forklifts. Excellent interpersonal and customer service skills. Experience diagnosing complex mechanical and related malfunctions. Expertise in reading technical manuals, references and specifications and service and recall bulletins. Written communication skills necessary to write routine correspondences, maintenance logs and order forms. Expertise in how to operate a forklift, power tools, wrenches, diagnostic equipment, and jacks. Working knowledge of computers, including Microsoft Access and Microsoft Office Suite. Adaptability to prioritize and schedule multiple work requirements. Flexibility in work schedule. Representational skills necessary to interact with outside vendors. Working knowledge of diesel, gas, and electric mechanics. Experience welding simple parts. Work Environment The work is usually performed inside on concrete surfaces where there is exposure to drafts, noise, and fumes from vehicles. Forklift technician - Senior occasionally perform work outside under adverse weather conditions. They are continually exposed to dirt, dust, and grease, and to the potential for burns, chemical irritations, shocks, bruises, cuts, and strains. To reduce dangers and irritations from these conditions, they follow prescribed safety practices and use safety equipment such as safety shoes and glasses, and respirators. Tools used in this occupation: Hand and power tools Scanners Modular diagnostic information systems Welding equipment Lifts Minimum Qualifications Active TS/SCI Clearance with Polygraph Experience: Ten (10) years of experience in the problem diagnosis, repair and maintenance of a wide variety of forklift maintenance. Education: High school Diploma or GED equivalent. Special Certifications: Certified in the safe operation of forklifts by the Sponsor within 30-days of commencing work and every 24-months as required. Certified maintenance on Raymond brand forklifts. Other pertinent forklift maintenance certifications. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Achieving our goals starts with supporting yours. Grow your career, access top-tier health and wellness benefits, build lasting connections with your team and our customers, and travel the world using our extensive route network. Come join us to create what's next. Let's define tomorrow, together. Description At United, we have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they're well taken care of and ready to get our customers to their desired destinations. If you're ready to work on our planes, join our Tech Ops experts and help keep our fleet in tip-top shape. The sign-on bonus is exclusively for external candidates, internal applicants are not eligible to receive the sign-on incentive. Key Responsibilities: Requires a thorough knowledge of general building maintenance with emphasis on electrical solving, including AC & DC circuits, high voltage (480), high amperage and some 400 cycle equipment Requires experience in industrial wiring and the ability to read and follow wiring schematics and work without supervision Journeyman electrical license a plus Requires the ability to make low and high voltage repairs to all building electrical equipment This includes solving, installation and repair of 110/220/480 volt single and multiphase electrical circuitry and devices You should also have some experience in related building equipment and trades, such as air handling units, plumbing and steam fitting, fire systems and conveyors Facilities Technicians must be able to work around the clock shifts, including weekends and holidays, in the outdoors in all weather conditions Schedules are bid and awarded according to seniority Facilities Technicians are represented by the International Brotherhood of Teamsters (IBT) Salary increases will be administered according to the current IBT/United contract New employees are required to join the union within ninety (90) days of employment There is an initiation fee for joining the union and subsequent monthly union dues which are set by the Local Lodge Qualifications United values diverse experiences, perspectives, and we encourage everyone who meets the minimum qualifications to apply. While having the "desired" qualifications make for a stronger candidate, we encourage applicants who may not feel they check ALL of those boxes! We are always looking for individuals who will bring something new to the table! What's needed to succeed: Twenty Four months experience required in at least three of the following areas: Electrical (including 480 volt, 3 phase) Structural (including steel frame construction) HVAC (including building management systems) Mechanical (including conveyors) Plumbing PLC electronic/computer controls Must have completed high school diploma, GED or equivalent Ability to maintain and repair all building disciplines, heavy mechanical and welding Work may be indoors or outside or in elevated areas anywhere on airport Must be able to climb and work from ladders, and/or walk for extended periods Moderate lifting Must possess sufficient tooling to perform required tasks Computer experience for input and retrieval of data Qualified candidates must be immediately available for full time employment Must possess a valid, clean, applicable state driver's license What will help you propel from the pack: Electronics diagnostics and troubleshooting United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact to request accommodation. The starting rate for this role is $34.52. This is also a bonus eligible position (i.e. profit sharing). We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement). United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. Equal Opportunity Employer - Minorities/Women/Veterans/Disabled/LGBT. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact to request accommodation.

Day to day: Performs testing, observation, and inspection as directed in accordance with training and the specified procedures. Provides clear documentation of findings and results. Performs basic analysis of data to verify accuracy before communication and submittal to the Project Manager. Communicates information to Project Manager and other personnel as directed by the PM. Assists higher level technicians on complex tasks. Maintains assigned equipment and related calibration. Follows safety rules and practices and other safety requirements for all projects. Performs pre-task planning prior to executing work. Report any safety issues or concerns to management. Be responsible for maintaining quality standards on all projects.

at Whaley Foodservice ***HIRING IMMEDIATELY!!!**** ***Sign On Bonus Available for Qualified Service Technicians*** Whaley Foodservice, LLC is one of the largest commercial kitchen equipment repair service companies in the Southeast comprised of over 600 employees located across 31 geographically dispersed locations.Visit "Whaley Careers" to find your place to grow. ********************************* Pay Rate: $31.00-39.00/hour* At Whaley we know people are vital to our success. We offer a competitive salary, on-call pay, and generous benefits including Sign-On Bonuses for Experienced Technicians Company Vehicle | Mobile Device | Uniforms Meters & Test Equipment Industry Certification 401k & Profit Sharing Paid Holidays & Vacation Medical & Dental Benefits Short-Term Disability | Long-Term Disability Insurance (company paid) Life Insurance (company paid) Enjoy the benefits of our Town Shares Program - share in our company's success! To learn more about current opportunities, visit Whaley Careers: ********************************* Summary: The Service Technician II provides maintenance, service, and repair for commercial cooking equipment and commercial refrigeration i.e. grills, fryers, ovens, ice machines, reach-in and walk-in coolers, freezers, etc. Details: Diagnoses, troubleshoots, and repairs commercial cooking kitchen equipment, refrigeration. Communicates status updates for part order(s) and repairs with branch support and customer. Completes service calls accurately and timely. Audits truck stock to ensure required parts are stocked. Ensures service vehicle, tools, and uniforms are consistent with Whaley standards of safety. Meets on-call requirements. Required Education | Experience Three years of experience in commercial kitchen repair and or refrigeration. Must be 18 years of age. Completion of a satisfactory background check and drug screen is required. Valid Driver's license and driving record that aligns with our safety standard. Skills and Abilities Ability to work independently Ability to accurately diagnose and troubleshoot: an automotive, electrical, installation, and mechanical background is a plus. Journeyman License and or CFESA certification not required but would be a plus. Strong attention to detail. Excellent communication and soft skills. Good driving record Whaley Foodservice is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.