Telecom technician jobs in Ohio - 2,643 jobs

Pay: 80-100k Full-time, year-round work Join ARS, the nation's largest provider of residential HVAC, plumbing, and electrical services with 7,000+ team members and over 45 years of experience. What We Offer: Weekly pay via direct deposit Paid training and onboarding Insurance available after 31 days Low-cost medical (as low as $5/week) Dental, vision, HSA/FSA 401(k) with company match 13 days PTO + 8 paid holidays Company-paid life insurance Take-home service vehicle + gas card Ongoing technical, safety, and leadership training Career growth across a national service network Responsibilities: What You'll Do: Perform residential electrical service calls, including troubleshooting and repairs Install and service home generators Install and service EV (electric vehicle) chargers Install, maintain, and repair wiring, lighting, outlets, and electrical panels Ensure work is performed in compliance with national and local electrical codes Provide excellent customer service and communicate recommended solutions Qualifications: What You'll Bring: Valid electrician license (state-specific) 2+ years of residential electrical experience preferred Strong understanding of electrical systems, safety standards, and code compliance Ability to work independently and as part of a team Strong communication and customer service skills If you have the experience we seek, APPLY NOW Note: This posting outlines potential pay ranges and opportunities, which are not guaranteed and do not represent a formal offer. Additional compensation may be offered based on experience and will be outlined in an offer letter addendum. ARS is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, age, disability, or any other protected status under applicable federal, state, or local laws. Privacy policy available upon request.

As a Field Service Technician, you will be responsible for the proper operation and maintenance of CenTrak's hardware infrastructure, tags, and other devices at our customer sites. This is a highly visible customer facing position for a detail-oriented person who thrives in a fast-paced environment. You must be a focused individual able to work responsibly for us. This is a hands-on position that requires you to be very proactive and energetic to develop and maintain positive customer relationships. It is the responsibility of the Field Services team to keep these complex systems operating at an optimal health. Responsibilities: Perform battery replacement for CenTrak infrastructure, asset tags, environmental monitoring (EM) sensors, hand hygiene (HH) devices, etc. Perform small installations of infrastructure devices and validate via CenTrak software. Conduct troubleshooting of problematic areas in conjunction with remote support personnel Monitor equipment status and alerts via the Connect PulseTM application Ability to understand CenTrak designs with regards to device location within the hospital Submit Return Material Authorizations (RMAs) of products under warranty Maintain proper inventory of batteries and other equipment necessary for device maintenance Document daily activities, findings, and recommendations and provide to Customer Maintain rapport with customers by examining complaints, identifying solutions, and suggesting improved methods/techniques for the RTLS utilization Qualifications: Preferred: Degree in Networking/Telecommunications 2-3+ years of experience in a professional services environment supporting end-users Experience with IR, Wireless and Network Protocols a plus Experience in enterprise healthcare or hospital environments Advanced problem-solving skills coupled with a commitment to extraordinary customer service Maintain confidentiality and comply with Health Insurance Portability and Accountability Act (HIPAA) requirements Comfortable navigating all areas of the hospital system including patient rooms Comfortable occasionally working around or with potential biological hazards; proper personal protective equipment will be worn in accordance with medical center policy and procedures Demonstrate proficiency with Microsoft Office and other business applications Some area travel required between local sites (reimbursable). Must have a valid driver's license, insurance, and means of transportation Working hours are expected between 8:00 am - 5:00 pm While a standard 40-hour working week is the norm, you can expect some evening or weekend work on occasion to meet deadlines for major go-live activity Comply with required immunizations, health testing, and other vendor requirements Physical Requirements: Ability to walk/stand for an extended period, up to 8-10 hours/day Ability to kneel, climb, lift, and carry up to 30 pounds Required to climb and stand on ladders, sometimes for extended periods of time Required to work with tools while reaching above your head for extended periods of time

Territory: Columbus, OH and surrounding areas - Daily Travel & occassional overnight/weekend work An established organization supporting the construction and materials industry is seeking a Field Service Technician to support customers through on-site equipment installation, service, and technical support. This is a remote, field-based position with frequent local and regional travel. Training, tools, and a company vehicle are provided. Key Responsibilities Install, maintain, and service customer equipment at job sites Troubleshoot and repair mechanical, electrical, and pneumatic systems Support customers with basic equipment operation and maintenance Maintain inventory of parts, tools, and service materials Document service activities and communicate with internal teams Provide a high level of customer service in the field Qualifications Mechanical or maintenance experience demonstrating technical aptitude Basic knowledge of electrical, pneumatic, or mechanical systems Ability to lift up to 50 lbs and perform physical job-site tasks Comfortable working independently and managing a field schedule Flexible availability to support customer and business needs Valid driver's license and clean driving record Comfortable driving within the assigned territory Compensation & Benefits Competitive compensation Health insurance and retirement plan options Paid time off and paid holidays Company vehicle, tools, and equipment provided Additional Information Full on-the-job training provided Field-based role with autonomy and customer interaction Equal opportunity employer

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding ExpertTM for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Req ID: 27865 Summary Position Overview The Facilities Engineering team within Cleveland Operations is responsible for planning, maintaining, and improving the infrastructure that supports our office, laboratory, and manufacturing environments. Our work ensures that every space operates safely, efficiently, and in alignment with organizational goals. As a Facilities Engineering Technician, you will play a key role in executing facility projects and supporting day-to-day operations. You'll collaborate with project managers and engineers to implement improvements, manage construction activities, and coordinate logistics such as relocations and contractor oversight. This position offers a hands-on opportunity to contribute to the reliability, safety, and functionality of our facilities while driving continuous improvement across all areas. Job Duties and Responsibilities Key Responsibilities: Assist project managers and engineers with construction activities, safety initiatives, and process improvements. Communicate construction plans to stakeholders and occupants, including details on temporary relocations, utility disruptions, construction zones, access changes, and noise mitigation strategies. Collaborate in a hands-on team environment to implement facility improvements, upgrades, and modifications. Promote and support Environmental, Health, and Safety (EHS) initiatives to maintain a safe and compliant workplace. Manage small to medium-sized projects and assist with capital projects under limited supervision. Provide support to other Facilities Team members as needed. Independently prioritize and complete office-related requests from internal customers. Assemble office furniture and workstations (e.g., desks, tables, filing cabinets, chairs) as required for projects. Operate or develop proficiency in facility equipment (e.g., forklifts, pallet jacks) for material handling tasks. Typical Assignments: Develop layouts and budgets for office, lab, or factory projects. Supervise and coordinate contractors during construction activities. Oversee completion of punch list items and ensure final occupancy readiness. Coordinate moves and project closeout activities. Source materials and products for facility projects. Address safety, environmental, and ergonomic concerns. Manage equipment removal, modification, and installation. Conduct contractor safety orientations. Perform additional tasks assigned by the supervisor. Basic Requirements Vocational Training and 5+ years' experience required; or GED with 7+ years in related field. (but does not require a university degree). Level IV; Vocational Training and 8+ years' experience required; or GED with 10+ years in related field. (but does not require a university degree). Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experience. Has advanced and specialized expertise, typically developed through a combination of job-related training and considerable work experience in construction May act as a lead, coordinating and facilitating the work of others but is not a supervisor Works autonomously within established procedures and practices Capable of performing hands-on work as required Demonstrated experience with MS Office tools including Word, Excel, and PowerPoint Experience with AutoCAD preferred. Ability to work independently or as part of a team Demonstrate good judgment and make good decisions Self-motivated, and safety conscious Strong organizational skills Ability to handle a variety of assignments and changing priorities Good computer skills Strong written and oral communication skills Ability to occasionally work overtime, off shifts and between facilities in Northeastern Ohio Ability to be effective working extensively in any area with employees or contractors. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Kings Island is seeking a full-time Appliance Repair Technician to support the safe and efficient operation of food service equipment throughout the park. This role is responsible for maintaining, repairing, and ensuring the safe operation of food service equipment across the parks restaurants, kitchens, and food stands. This role offers a competitive benefits package and the opportunity to work in a dynamic, team-oriented environment. Responsibilities: Perform routine and emergency maintenance on food service equipment including grills, fryers, ovens, refrigerators, and beverage dispensers. Troubleshoot mechanical and electrical issues in kitchen appliances and systems. Conduct preventative maintenance to minimize downtime and ensure compliance with safety and health regulations. Collaborate with Food & Beverage and Maintenance teams to support operational needs. Maintain accurate records of repairs, inspections, and parts inventory. Ensure all work is performed in accordance with park safety standards and food safety guidelines. Qualifications: High school diploma or equivalent; technical certification preferred. Minimum 12 years of experience in food equipment maintenance or a related field. Familiarity with commercial kitchen equipment and basic electrical and plumbing systems. Ability to read schematics and technical manuals. Strong problem-solving skills and attention to detail. Ability to work in a fast-paced, outdoor environment and adapt to changing priorities. Availability to work varied shifts including weekends, evenings, and holidays.

Acara Solutions is seeking highly qualified Service Technicians to work onsite (70%-80%) with our client in Cincinnati, OH. Pay rate: $28.00-$34.00/Hour Hours: 40 Hours/Week Length: Direct Hire Competitive hourly pay Opportunities for growth and advancement Be part of a company that values innovation, reliability, and people Work with state-of-the-art equipment and a supportive technical team Here's what you'd do: We're looking for a Service Technician who's passionate about problem-solving, enjoys working with their hands, and thrives in a high-tech, customer-focused environment. If you're a tech-savvy professional with a knack for diagnostics and a desire to travel, this is the opportunity for you! As part of our Technical Service Team, you'll be the go-to expert for equipment repair, installations, and support. Your work will directly impact customer success and product performance across a variety of industries. Repairing, modifying, testing, and installing complex industrial equipment Handling customer service requests and technical support inquiries Logging and managing service calls, orders, and customer data Keeping detailed records in our ERP and service databases Preparing reports and documentation with precision and timeliness Coordinating travel and visiting customer sites across the U.S. and rarely abroad (Mexico & Canada) Collaborating with teams to solve real-world technical challenges Taking on additional technical and service-similar tasks as needed. About Acara Solutions Acara is a premier provider of recruiting and workforce solutions, and we help companies compete for talent. With a legacy of needs in various industries worldwide, we partner with clients, listen to them, and customize visionary talent solutions that drive desired business outcomes. We leverage decades of experience to deliver contingent staffing, direct placement, executive search, and workforce services worldwide. Job Requirements Required Skills / Qualifications: Associate's degree in Electrical or Mechanical Technology - or equivalent hands-on experience Minimum of 2 years of experience in an industrial/technical environment Must have at least one year recent experience troubleshooting PLC's and PCB's. Must have at least six months of strong welding skills. Must have at least 6 months of customer service experience. Preferred Skills / Qualifications: Good computer skills, including databases, Microsoft Office, and ERP software A passion for learning new tools, systems, and technologies Great communication skills - written, verbal, and in front of a group Troubleshoot advanced control systems Analyze technical data and present it in charts or reports MIG & TIG welding experience Work independently and think critically to solve complex problems. Additional Information : Upon offer of employment, the individual will be subject to a background check and a drug screen. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. Valid driver's license and the ability to travel internationally (passport-ready) Office-based environment with occasional visits to the manufacturing floor Quiet, professional setting with a collaborative team culture 20-30% travel to support our amazing customers - both domestic and international Light physical activity may be required (some lifting, bending, stair-climbing) Aleron companies (Acara Solutions, Aleron Shared Resources, Broadleaf Results, Lume Strategies, TalentRise, Viaduct) are an Equal Opportunity Employer. Race/Color/Gender/Religion/National Origin/Disability/Veteran. Applicants for this position must be legally authorized to work in the United States. This position does not meet the employment requirements for individuals with F-1 OPT STEM work authorization status.

About the Role We are looking for an experienced and detail-oriented Residential Fire Alarm Technician to join our team. In this role, you will be responsible for the installation, maintenance, testing, and servicing of fire alarm systems in residential properties. You'll ensure that every system is safe, reliable, and compliant with local and national fire safety codes, helping to protect families and homes across our community. Key Responsibilities Install and maintain fire alarm systems in residential properties, including single-family homes, apartments, and multi-family dwellings. Serve as the primary point of contact for all residential fire alarm and low-voltage functions. Coordinate daily work schedules and timelines with the project management team. Communicate effectively with homeowners, builders, vendors, and other on-site personnel. Ensure all work is performed safely and in compliance with company and OSHA standards. Attend daily morning meetings and maintain accurate job site logs and documentation. Conduct inspections and system tests to confirm proper operation and code compliance. Diagnose and repair issues involving control panels, wiring, sensors, and alarm devices. Verify that all installations and service work meet NFPA, UL, and local code requirements. Identify potential issues proactively and recommend corrective actions. Provide responsive, on-call support for residential system emergencies as needed. Qualifications Minimum 2 years of experience in residential fire alarm installation, service, and maintenance. State of Ohio Fire Alarm Certification required. NICET certification in Fire Alarm Systems preferred. OSHA 10-Hour and First Aid/CPR certifications a plus. Valid driver's license and clean driving record required. Strong knowledge of residential fire alarm systems, wiring, and safety codes. Excellent troubleshooting, communication, and customer service skills. Ability to work independently, manage multiple projects, and meet deadlines. Why Join Us Competitive pay and comprehensive benefits package. Opportunities for professional growth and ongoing training. A supportive, safety-focused team dedicated to protecting people and property.

The Residential Service Technician is a troubleshooter and service expert who is responsible for alleviating concerns the customer may have regarding a security system. The Residential Service Technician advises customers and the customer care center Service Technician, Service Tech, Technician, Equipment Repair, Residential, Social Services

It's fun to work in a company where people truly BELIEVE in what they're doing! We're committed to bringing passion and customer focus to the business. OBA, a Groundworks Company, specializes in helping homeowners with their foundation repair, basement waterproofing, crawl space encapsulation, concrete, and water management needs. Our top priority is providing high-quality home repair solutions and personalized service across the Nation. With fully trained technicians, industry-leading products, and nationally backed warranties, Groundworks is here to protect, repair, and improve our customer's most valuable asset - their homes. The Plumbing Service Technician is responsible for providing a professional service for homeowners navigating plumbing and gas issues. This includes diagnosing the issue, presenting a solution to the homeowner in a professional manner with a written proposal, drawing and pictures and performing the repair or installation. Duties and Responsibilities Operate a snake to clear main and branch drain lines in homes and businesses. Operate and tow a Jetter to clear clogged sewer lines. Knowledge and experience to diagnose, repair and/or replace all aspects of a water heater (Electric, Gas and Tankless) in home or business. Install fixtures (Kitchen faucet, Bathroom fixtures and tub/shower fixtures) and repair existing fixtures (Valve stim replacement/rebuild). Remove and replace a toilet or rebuild the components of a toilet. Operate a sewer camera and locater to determine the cause of sewer line issues. Ability to locate sewer lines and mark. Locate gas line leaks and make appropriate repairs and follow required red tag process. Remove/replace/repair existing gas lines as well as install/run new gas lines. Remove/replace/repair existing water lines as well as install/run new water lines. Remove and replace existing garbage disposals. Utilize leak detection equipment to locate where a leak is occurring under slabs and ground. Certification to conduct Back Flow Testing- Test and verify a backflow is operational. Diagnose, and present a solution to the homeowner in a professional manner with a written proposal, drawing and pictures. Provide your own hand tools Operate a company vehicle monitored by GPS and maintain safe driving habits Utilize ServiceTitan to document Service Calls- Notes and Pictures are required on all service calls. On Call and weekend shifts: We have a rotating schedule. Each shift is a 5-day work week with 1-2 on calls per month. All other duties assigned Qualifications Minimum 2 years of experience in Residential Plumbing High School Diploma or GED Valid Driver's license Knowledge of basic hand and plumbing tools Experience with home and commercial software and technology - ServiceTitan For back flow testers you must have the appropriate certification. Who is Groundworks? With more than 50 locations across the USA, Groundworks is the fastest-growing foundation solutions company in the country! Recognized as a Top Workplaces USATM company and offering ownership for everyone, we're building something that just can't be replicated. And we're on a mission to change an industry like never before! We're unique here at Groundworks. We are all connected through the same vision, mission, and values, and we are stronger together. That's why we're proud to be the Groundworks Tribe! Our shared culture, resources, work ethic, and even the lingo we use to unite us as #OneTribe When customers choose a local Groundworks company, they can feel confident they're hiring trusted local experts who will ensure the job's done right. When you choose Groundworks, you'll join thousands of Tribemates who are making history. It's the Groundworks difference! So come and help us make history. Join our Tribe! #Groundworks #StrongerTogether #OneTribe

Is this you? You are driven to use your knowledge, skills, and work ethic to make a difference, saving both lives and property You have a passion for delivering top-notch customer service You thrive in a fast-paced work environment, always up for learning something new If yes, then bring your talent and skills to F.E. Moran Fire Protection! We have an exciting opportunity in Columbus, OH for an experienced Fire Alarm Technician. As our company continues to expand, we want you to grow and develop with us! You Are: KNOWLEDGEABLE: High school diploma or equivalent; previous Fire Alarm Technician, Security Technician or other electronic systems experience; Understanding of NFPA standards, International Building and Fire Codes, Accessibility Codes, and state and locally adopted life safety codes TECHNICAL: Proficient in the application of Basic Electronic Theory and in the use of a digital multimeter; Ability to read and understand blueprints, schematics, and datasheets; Experience in troubleshooting, repair, and maintenance of fire alarm and other electronic systems preferred; Intermediate MS Office and Excel skills A SELF-STARTER: Learn quickly and use your resources to be successful in your role ANALYTICAL: Ability to read and understand technical information, analyze, think critically, and problem-solve FLEXIBLE: Travel to client sites regularly; Apply technical skills across multiple system types and disciplines, including fire alarm, intrusion, CCTV, access control, and structured cabling What You'll Do: SERVICE & INSTALL: Assemble control panels and build system programs; Install low voltage cabling and electronic system components; Troubleshoot systems to the component level to identify equipment necessary for repairs; Inspect and test fire alarm and other electronic systems KEEP TO CODE: Ensure that projects are compliant with local, state, federal, and district codes, regulations, and specifications; Complete required documentation accurately and in a timely fashion PUT SAFETY FIRST: Adhere to OSHA, customer, and safety protocols while on site; utilize safety best practices when lifting, moving, or pushing heavy materials and while climbing, balancing, and maneuvering on the job site COMMUNICATE: Provide thorough and timely information to clients; Communicate status of work orders to supervisors and other office staff COLLABORATE: Coordinate with project Foreman and other trades to complete projects and work orders efficiently; Maintain positive working relationships with field and office staff What We Offer: TOTAL REWARDS: Competitive salary and benefits package, including medical, dental, and vision; life and disability insurance; paid time off; and 401(k) retirement savings plan with discretionary company match DEVELOPMENT: Opportunities to learn, develop, and enhance your skills and abilities WORK ENVIRONMENT: Professional, engaging, supportive, and rewarding TEAM: Play an integral role in a knowledgeable and high achieving group of professionals Who We Are: The F.E. Moran Group of Companies is comprised of seven specialized businesses offering a full spectrum of HVAC, Mechanical Services, Fire Protection, Special Hazard Systems, Plumbing, Refrigeration, and Industrial Piping Services across virtually every market. We are a single-source contractor working seamlessly to consolidate resources and deliver outstanding construction and service solutions, regardless of size, scope, complexity, or location… We save lives, protect property, and create healthy environments. Interested? Apply Now! Candidates must be at least 21 years of age to be eligible for positions that require participation in the company's fleet program. This is a requirement for roles involving the operation of company vehicles. At F.E. Moran Group of Companies, we are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. If you have a specific need that requires accommodation, please advise a member of the Talent Acquisition team by contacting us at *******************.

Acuren is currently recruiting for UTSW Technicians to help support operations in Akron, OH and surrounding areas. THIS WILL BE A CALLOUT/ TRAVEL POSITION. Successful candidates must be able to travel up to 90% throughout Akron, OH and surrounding ar Technician, Operations, Healthcare, Inspection, Tech

Title: Data Center FieldOps Technician (RunOps Technician) Contract:3 months with 1 year of extension The Datacenter FieldOps team is responsible for supporting all production network cabling in the Datacenter. This global team offers a unique career opportunity to work with the latest network technologies and talented engineers solving complex problems in the industry. Job Duties and Responsibilities Loopback Testing and Circuit Audits: Techs will perform loopback testing and circuit audits as per the project requirements. Loopback Testing Scope of Work: Identify all network circuits that require loopback testing Set up test equipment to simulate traffic on each circuit Perform loopback testing on each identified circuit Isolate and troubleshoot any faults or issues detected during loopback testing Document all test results, including any faults or issues found Circuit Audits Scope of Work: Conduct a physical inspection of all network circuits Verify that all network devices are properly configured and connected to the correct circuits Test the signal quality of each circuit Document all audit findings, including any discrepancies or issues found Remediate any issues found during the audit Overtime and Weekend Work: Overtime and weekend work will be available for all techs, as needed. Safety Briefings: Conduct regular safety briefings to ensure techs are aware of potential hazards and follow safety protocols. Physical and Mental Requirements ● Self-motivated, positive, professional, and proactive in process improvements. ● Promote company culture and mission. ● Proficient with required tools. ● Act as company liaison with customer representatives. ● Ability to work at heights, off ladders, in confined spaces. ● Lift up to 50 pounds and move up to 75 pounds. ● Good color vision, ability to read small print, and recognize audible signals. Skill Requirements ● Preferred in testing and troubleshooting MMF & SMF systems (OTDR & PMLS). ● Preferred 1-3 years of fiber experience. ● Preferred data center installation experience. ● Preferred mechanical and fusion splice experience. ● Preferred OSP / confined space entry experience (splicing). ● Proficient with trade tools including screwdrivers, torpedo level, tape measure, snips, pliers, hammer, wrench set, cable stripper, flashlight, gloves, punch tool, tone set, crimp tool, and Krone/3M/BIX tools.

Job ID 2025-12452 # of Openings 1 Category Data/Analytics Benefit Type Salaried High Fringe/Full-Time LMI is seeking a skilled GenAI Project Lead to support LMI's Air Force account. The GenAI Project Lead will oversee multiple artificial intelligence technology project delivery teams, drive program schedules, manage project financials, and ensure the high-quality delivery of LMI contracts. A successful GenAI Project Lead will be highly skilled in project management, agile software delivery, communication, project planning, and financial management. The ideal candidate will be detail-oriented, possess the management skills to hold team members accountable to quality expectations and timelines, and respond swiftly to evolving client needs. A background in digital transformation and software development is highly desired. The GenAI Project Lead must demonstrate competency in leadership, strategic thinking, relationship management, multitasking, schedule management, and delivery excellence, while upholding the highest standard of ethical behavior. LMI is a new breed of digital solutions provider dedicated to accelerating government impact with innovation and speed. Investing in technology and prototypes ahead of need, LMI brings commercial-grade platforms and mission-ready AI to federal agencies at commercial speed. Leveraging our mission-ready technology and solutions, proven expertise in federal deployment, and strategic relationships, we enhance outcomes for the government, efficiently and effectively. With a focus on agility and collaboration, LMI serves the defense, space, healthcare, and energy sectors-helping agencies navigate complexity and outpace change. Headquartered in Tysons, Virginia, LMI is committed to delivering impactful results that strengthen missions and drive lasting value. Responsibilities Management of complex Agile AI projects ensuring that goals, requirements, and outcomes are defined and that the appropriate resources are allocated Monitor team performance to ensure that projects are implemented, supported, and closed accurately and in accordance with key milestones and established project standards are upheld and clearly defined throughout the entire process of each project's development and execution Foster positive working relationships with team members, client personnel, and leadership counterparts Prioritize tasks, set deadlines, and assign resources to each project Track cost, schedule, and performance, as well as prepare documents and develop project-specific policy, procedures, and report status to all levels Manage staffing requirements, including recruiting, hiring, onboarding, and execution Manage task assignments and oversight of personnel to ensure excellence in service delivery Prepare monthly cost reports and ensure such deliverables are submitted in a timely fashion and of high quality/accuracy. When appropriate, propose a plan to correct any cost variances or projected rate adjustments Ensure program compliance with government and corporate policies and mandates, and adherence to directives from governing entities Anticipate and resolve procurement challenges and problems, such as small business set-aside goals, certification requirements, and acquisition strategy Work with LMI and LMI business partners to pursue new business opportunities Support business development and bid and proposal efforts for opportunities, bringing together capabilities across LMI to define a solution that meets and exceeds client expectations Qualifications MINIMUM: Bachelor's Degree or higher Minimum of 5 years consulting experience Minimum 3 years project management and/or task leadership experience Experience with GenAI technologies and a strong point of view on how these tools can be combined to impact the government Experience in the areas of SDLC and Agile software development methodologies Technically adept and business-focused to interface across technical disciplines and senior leadership Product management or related product lifecycle experience Superior communication skills, both oral and written Strong problem-solving and analytical skills with a "client first" attitude Demonstrated ability to lead teams to successful outcomes Exceptional organizational skills and a deep understanding of project management best practices Demonstrated ability to balance competing priorities and exhibit flexibility based on changing client needs High level of business acumen, ability to develop and implement strategy Strong connector - make insightful connections to bring the right people together to solve problems and grow the business Active TS/SCI security clearance required DESIRED SKILLS: Master's degree or higher (MBA, Masters in Data Science, Engineering, Computer Science or a related field) Prior experience running software development projects Experience with Air Force or Department of Defense projects preferred Target salary range: $130,986 - $233,154 The salary range displayed represents the typical salary range for this position and is not a guarantee of compensation. Individual salaries are determined by various factors including, but not limited to location, internal equity, business considerations, client contract requirements, and candidate qualifications, such as education, experience, skills, and security clearances. #LI-SH1 LMI is an Equal Opportunity Employer. LMI is committed to the fair treatment of all and to our policy of providing applicants and employees with equal employment opportunities. LMI recruits, hires, trains, and promotes people without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, disability, age, protected veteran status, citizenship status, genetic information, or any other characteristic protected by applicable federal, state, or local law. If you are a person with a disability needing assistance with the application process, please contact Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. Need help finding the right job? We can recommend jobs specifically for you! Click here to get started.

About Ace Retail Group Ace Retail Group (ARG), is a division of Ace Hardware Corporation that owns and operates several Ace brands, including Westlake Ace, Great Lakes Ace, Buikemas Ace, Outer Banks Ace, Dennis Company, and Breed & Company.ARG is one of the largest hardware retailers in the United States and has two headquarters located in Lenexa, KS and Farmington Hills, MI.ARGs origins date back over a century and operates over 250 neighborhood stores located throughout the United States.Great people make ARG stand out in our industry, and we are looking for individuals who strive for personal and professional growth, and who want to work with a company founded on (and still led by) our solid Core Values of: Winning, Excellence, Love, Integrity, Gratitude, Humility and Teamwork. Great Lakes Ace Hardware is growing and expanding! We are looking to add friendly faces to our existing team! The ideal candidate for the STIHL Technician Position will be mechanically inclined and have experience in small engine repair and equipment maintenance, preferably with STIHL power equipment. The preferred candidate will have the ability to show consumers how to properly use a wide variety of STIHL power equipment. In addition, this candidate will be responsible for maintaining outstanding customer service, generate sales, merchandise product, own assigned departments and support the store management team. ESSENTIAL DUTIES AND RESPONSIBILITIES Equipment Repair: Ensures equipment is repaired, safe, and ready to process. Orders repair parts as needed for equipment repair Ensures proper check in and check out of equipment Maintains repair schedule and regular maintenance schedules for all STIHL equipment Identifies and notifies management of any pricing irregularities in the system Customer Service & Sales: Ensures customers are provided with the highest levels of customer service. Greets all customers and assists in answering questions about merchandise and locating merchandising; uses The S.A.L.E.S. process to help customers find everything on their lists. Completes all company and departmental paperwork accurately, including Price Change Bulletins, Operation Actions, Red Tags, and Bin Tags. Receives, opens, and unpacks cartons or crates of merchandise, checking paperwork against items received when required, and replenishes stock when necessary. Displays and maintains merchandise on end caps, shelves, counters or tables following company plan-o-gram, building displays when necessary to attract customers and promote sales within specified guidelines by your management team. Maintains on-hand integrity through inventory adjustment reports including; cycle count, negative on-hand. Follows the nightly maintenance checklist to ensure proper store recovery and cleanliness. Maintains familiarity with new products and ad merchandise. Has sound awareness of surroundings, customers, etc. and practices loss prevention techniques to minimize shoplifting losses. Working knowledge of the tools available to operate the store; including, but not limited to: RF Gun, Back Office Procedures and the use of Store Opportunities. Follows GLA policies and procedures for all transactions. Engages the customer to ensure they are receiving all the benefits of being an Ace Rewards member and actively seeking participation from them. Must be able to communicate effectively, and work with colleagues and customers effectively and professionally. ADDITIONAL DUTIES AND RESPONSIBILITIES Assists with color matching and mixing paint Operates cash register by scanning all merchandise, engaging the customer through suggestive selling, proper tendering of each transaction, and thanking the customer for shopping at GLA. Adhere to all company policies. Participates in periodic team meetings. A continuous pattern of regular and prompt attendance is required along with the ability to work a flexible schedule including weekends. Compensation Details $15.00 per hour For a full list of benefits and open positions, please visit us at: ************************************************************ Want to be notified when new jobs are posted? Follow the link below to create an account and set up custom job alerts: Create Job Alert Equal Opportunity Employer Ace Retail Group is committed to a policy of promoting equal employment opportunities. The company recognizes the importance of diversity and leveraging the skills and talents of all people to the mutual advantage of each individual and the organization. The company is committed to the prevention of employment discrimination related to race, religion, color, sex (including sexual harassment), gender identity, national origin, age, marital status, disability and military discharge, or any other action covered by federal or state laws. Required Preferred Job Industries Retail

Job Description National Technologies (NTI), a Network Connex Company, is a premier turnkey installer of fiber optic and data center infrastructure. Working on our team puts you on the leading edge of innovation in the digital communications space. If being a part of a tight-knit organization that operates in some of the most advanced technology environments around the world sounds like a dream job, NTI might be the right fit for you! With the perks of a large organization, NTI remains true to its roots as a home-grown company with an open door culture that welcomes new ideas and encourages professional growth. We set you on the right path with careful onboarding and thorough training programs that prepare you for success in your role and beyond. Job Summary: NTI is seeking a Traveling Foreman with will lead a team, ensuring projects are completed safely, on time, and to customer quality standards while performing advanced fiber optic splicing and testing tasks. This role requires national travel to various project sites and combines leadership, project management, and technical expertise in fiber optic infrastructure. Key Responsibilities: Ensure project safety, quality, schedule, and cost compliance with company/client standards. Lead 2-3 crew members, optimizing skills and equipment use. Act as primary liaison between Project Manager and crew. Interpret customer prints to plan tasks and schedule work. Hold daily pre-work meetings to align on goals and safety. Verify construction and splicing work meets standards. Complete phase-specific closeout documentation. Document job progress with photos. Maintain company equipment (vehicles, trailers, test tools). Perform precise fusion and mid-sheath splicing on high-count fiber cables (864ct, 1728ct, 3456ct). Conduct live fiber splicing during maintenance windows to minimize disruptions. Install fiber optic cables in various environments (underground, aerial, indoor). Execute OTDR/OLTS testing to assess cable performance. Troubleshoot and resolve live network fiber issues. Produce FastReporter reports for test and splicing documentation. Operate Fujikura splicers and EXFO testers for low-loss splices and diagnostics. Pull fiber cables through conduits/ducts for installations. Support cabinet bolting and basket tray installation (preferred). Safely operate scissor lifts for elevated work (preferred). Maintain a clean workspace and follow proper handling procedures for fiber optic materials and equipment. Comply with OSHA, IBEW Local, and NTI safety standards Work Schedule and Environment: Work indoors and outdoors in various weather conditions, adapting to project requirements. Perform tasks during daytime and occasional nighttime maintenance windows as required by client schedules. Stand for extended periods (8-10 hours per day) and perform physically demanding tasks, including lifting and carrying up to 50 pounds. Experience and Education: 5+ years of experience in the telecommunications industry with related experience in construction and tower work. 2-3 years of verifiable experience splicing and testing fiber optic cables for dark fiber providers (e.g., Zayo), meeting stringent quality and performance standards. 3+ years of hands-on experience using Fujikura fusion splicing machines for high-count fiber splicing (864ct, 1728ct, 3456ct). 3+ years of experience performing OTDR and OLTS testing with EXFO testing equipment. 2+ years of experience producing Fast Reporter reports for network documentation. Qualifications & Skills: Proven ability to perform mid-sheath (ring-cut) splicing and live fiber network splicing with minimal service disruption. Strong troubleshooting skills for diagnosing and resolving issues on live/active network fiber. Familiarity with cable pulling, cabinet bolting, basket tray installation, and scissor lift operation (preferred). Strong written and oral communication skills for effective team and client interactions. Proficiency in Microsoft Office (Excel, Word, Outlook) for documentation and reporting. Strong interpersonal skills and a strong work ethic. Ability to pass a clean background check and drug screen. Valid driver's license required. Fluency in English for effective communication. Certification in fiber optic splicing or testing (e.g., FOA CFOT, BICSI, or equivalent) preferred. Prior experience with major telecommunications carriers or dark fiber providers beyond Zayo preferred. Familiarity with additional fiber optic testing tools or software beyond EXFO and FastReporter preferred. Union Affiliation: This is a union position under IBEW Local requiring adherence to union agreements, policies, and benefits structures. Benefits: Competitive union wages and benefits package through IBEW Local 640, including health insurance, retirement plans, and paid time off. Opportunities for professional development and training in advanced fiber optic technologies. Access to a supportive union environment with representation and advocacy. Collaborative and safety-focused work culture at NTI. Pay rates may vary based on skills, background, experience and specific location. NTI provides a comprehensive benefits package including health, dental, vision, life, and disability insurance and retirement savings options. For Union employees, pay rates and benefit levels are determined by union classifications which are set by the union. National Technologies (NTI) believes all persons are entitled to equal employment opportunities and does not discriminate against employees or job applicants because of race, color, gender, affectional or sexual orientation, domestic partnership status, ancestry, religion, national origin, citizenship status, marital status, disability, veteran status, age or any other protected group status. Upon acceptance of an offer, all candidates will be required to pass a background check and drug screening.

Field Technician Salary: $18.50 $24.50 No Experience Required Sign-On Bonus: $250 Join Our Team! Ready to build a career with meaningful growth, strong support, and great pay? Do you have the desire to work hard and build a stable career at an Employee-Owned company? Tired of not being able to pay your bills on time and differentiate yourselves from team members that don t perform like you do? If so, now is the time to join the Satellites Unlimited (SUI) family as a Field Technician! This entry-level satellite TV and broadband installer role is ideal for individuals with mechanical aptitude and good communication & customer service skills. Quick Apply: Takes less than 10 minutes on our website Watch what it s like to be part of the team: **************************** Facebook: ******************************************** YouTube Channel: *************************************************************** Why You'll Love This Role Competitive Pay: $18.50/hour base pay guaranteed (Year 1). Techs currently earn $22 $24.50/hour on average based on performance; top performers earn up to $35/hour. Paid Training Bonuses: Weekly and monthly performance-based incentives Company-provided vehicle, gas card, tools, and phone 100% Employee-Owned Company Independent Work & Autonomy: Enjoy a variety of tasks without constant oversight What You ll Do Install tech products from DISH, Boost Mobile, OnTech, Hughes, Polk Audio, Google, and Ring Troubleshoot and solve equipment & service issues Educate customers and sell smart home products & related services What You ll Need - Physical Requirements Ability to lift up to 80lbs. And carry extension ladders Stand for long periods of time Must be at or below 330 lb weight limit Work in confined spaces - Professional Requirements Strong customer service and communication skills Valid driver s license and clear driving record Pass background check and drug screen Flexible availability, including weekends and holidays About Us Satellites Unlimited (SUI) is a Regional Service Provider and Authorized Retailer serving the Southeast. With over 300 team members and 175,000+ customers annually, we deliver top-notch video, internet, home automation, and security solutions. Most of our team leaders, trainers, and managers began their careers as field technicians. Technicians can grow into roles like Field Service Manager, Corporate Training Instructor, Trade Development Specialist, and other leadership roles. We improve lives through bold, unmatched field service excellence! Benefits Medical, Dental, Vision Insurance Company-Paid Life Insurance Short & Long-Term Disability 401(k) Plan Employee Stock Ownership Plan (ESOP) Paid Vacation: 5 days after 6 months 5 additional days after 1-year anniversary Ongoing Technical Training & Career Development Promotion Opportunities (many current leaders started as technicians) Employee Assistance Program (financial/legal/family services) Tuition Reimbursement If you're motivated, hands-on, and ready for a career you can grow with, we d love to hear from you. #LeadDog

A Fiber Splicer will perform tasks associated with the construction/upgrade of telephone systems. A Fiber Splicer is responsible for terminating, splicing, bonding/grounding, documenting, and testing fiber optic cables within the systems networks and their related equipment resulting in maximum operating efficiency. Responsibilities: Performs tasks associated with the electronic upgrade and splicing of fiber lines Maintain proper inventory on vehicle based on work assignment Assemble equipment according to design specifications Install/repair fiber lines in trenches and/or pedestals using various hand tools Test, activate, and troubleshoot equipment after installation Basic daily maintenance of provided vehicle-check fluids, clean and organize vehicle Prepare paperwork to track daily production, and accurately record completed work on job site blueprints Qualifications / Experience: Ability to work both individually and in a team environment Ability to communicate professionally with co-workers, homeowners, and customers Ability to lift, push, pull, and carry 50 pounds several times each day Ability to endure long periods of standing, sitting, or walking Ability to work in an outdoor environment during all times of the year Must have a valid driver's license (CDL Class “A” preferred) Ability to operate technical equipment, including but not limited to computer, OTDR and fusion splicing equipment Ability to lift and manipulate splice enclosures and other plant and equipment Must be available for weekend call outs

Our busy pipeline company is seeking an experienced Fiber Splicer to join our team of construction professionals. The ideal candidates will have 5 years of experience in the Telecommunications field. If you are looking to work alongside some of the best in the industry, please apply today! Essential Duties and Responsibilities: Splicing loose tube fiber Splicing ribbon fiber Perform testing OTDR and maintaining documents. Troubleshooting fiber networks Case audits Work in a team environment. On call rotation for emergency work/repair. Proficient in using EXFO and Fujikura products. Build splice cases to our standards and customers. Preferred Qualifications: FOA or related certification 5 years of relevant experience Minium Qualifications: High School Diploma or equivalent Clean driving record Ability to work outside in all weather conditions About Mid-Ohio Pipeline: Mid-Ohio Pipeline is continuously dedicated to providing the utility industry with services that exceed the expectations of our customers while maintaining the highest regard for safety, quality, and the environment. Our goal is to provide the greatest value in the utility construction industry. With over 50 years of experience, we look to diversify into renewable energy sectors that will continue to support the utility industry through the next 50 years. Mid-Ohio Pipeline is an Equal Opportunity Employer and Drug-Free Workplace offering quality benefits to employees including: Medical /Dental /Life Insurance 401K with match Profit-Sharing Employee Stock Purchase Plan Paid Holiday and PTO Time Workboot reimbursement program Job Type: Full-time Salary: Based on experience. Benefits: 401(k) 401(k) matching Dental insurance Health insurance Vision insurance Health savings account Life insurance Paid time off Schedule: 10 hour shift Monday to Friday Overtime Weekends as needed Supplemental pay types: Bonus pay

Full-time Description Build the Future of Fiber with DCOMM! At DCOMM, we power the networks that connect communities - from design to activation, fronthaul to backhaul, and underground to aerial. With a surge in OSP underground (UG) construction projects, we're expanding our team and looking for skilled Fiber Splicers ready to take their careers to the next level. If you take pride in precision, safety, and craftsmanship - and you're ready to work with cutting-edge technology - we want to hear from you! Requirements What We're Looking For? Experience with fiber optic splicing, testing, and troubleshooting Knowledge of OTDR testing, bonding/grounding, and fiber documentation Ability to read and follow engineering blueprints Physical ability to bend, climb, lift (up to 80 lbs), and work in tight spaces Valid driver's license with a clean driving record Strong communication skills and commitment to quality and safety What You'll Do Splice, terminate, and test fiber optic cables to deliver high-performance connectivity Perform OTDR testing to verify splices, identify loss points, and ensure network integrity Interpret blueprints and splice diagrams to complete projects accurately and efficiently Troubleshoot and repair fiber issues to keep customers connected Create and maintain as-built documentation and daily production reports Work both independently and as part of a team to meet project goals Engage with property owners and residents professionally while on site Why Join DCOMM? Weekly pay - reliable income for your hard work Competitive pay based on experience Career advancement - we invest in your training and long-term growth Hands-on, high-tech work in a growing industry Veteran-friendly environment - your skills and discipline are valued here Supportive, safety-first culture with top-quality tools and resources DCOMM | Build Skills. Build Connections. Build Your Future. COMMITMENT TO EQUAL OPPORTUNITY DCOMM is an Equal Opportunity Employer. We are committed to fostering an inclusive and equitable workplace where diversity is celebrated. We do not discriminate based on race, color, religion, sex (including pregnancy-related conditions), sexual orientation, gender identity or expression, national origin, ancestry, age, disability, genetic information, veteran status, or any other characteristic protected by federal, state, or local law.