Builders FirstSource jobs in Orem, UT - 38 jobs

PURPOSE This is an entry-level position that performs repetitive assembly operations to mass-produce products such as windows, doors, trusses, panels, or stairs by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES Places parts in specified relationship to each other. Bolts, clips, screws, cements, or otherwise fastens parts together. Cut products to specific measurements as needed. Removes defective products as needed. Tends machines to perform force fitting or fastening operations on assembly line. Works at different workstations as production needs require. Works in environment where tasks change as varying models of product are produced. Cleans equipment, floors, and work areas according to safety procedures. Other duties may be assigned. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. MINIMUM REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. There are no requirements in terms of education or experience. Prior carpentry experience helpful. COMPETENCIES Ability to read and comprehend simple instructions. Ability to write simple correspondence. Verbal expression ability to effectively present information, in both individual and small group situations. Ability to add, subtract, multiply, and divide. Ability to read tape measure. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Overtime work could be involved. WORK ENVIRONMENT / PHYSICAL ACTIVITY The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is continuously required to stand; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is continuously required to walk. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must continuously lift and /or move up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee is continuously exposed to moving mechanical parts and may be exposed to airborne particles. The employee is frequently exposed to outside weather conditions; extreme cold; extreme heat; risk of electrical shock and vibration. The noise level in the work environment is usually loud. Will be required to wear ear plugs for noise protection as well as eye protection and other personal protective equipment required by the location.

Mon-Fri, 5am-10am Preferred Qualifications Prior experience working in multiple departments in a distribution center. Previous experience operating material handling equipment. Ability to understand written material. Job Summary Works in multiple departments within a distribution center, including case pick, shipping, receiving, returns, loading, order processing, and replenishment. Operates material handling equipment to move inventory within the facility. Major Tasks, Responsibilities, and Key Accountabilities Uses material handling equipment to locate and deliver products, supplies, and equipment to designated areas. Assists with staging and loading orders into trucks for customer delivery. Verifies quantity and quality of incoming products from vendors and distribution centers. Uses packing list information to collect items for customer orders, including building and wrapping pallets of products. Examines and inspects stock items for wear and defects and notifies management of inventory issues. Returns misplaced products to proper storage areas. Maintains a clean working environment in accordance with company safety policies. Performs inventory control functions as needed. Nature and Scope Refers complex, unusual problems to supervisor. Under general supervision, exercises some judgment in accordance with well-defined policies, procedures, and techniques. Work typically involves regular review of output by a senior coworker or supervisor. Work Environment Typically located in a comfortable environment but with regular exposure to factors that may cause noticeable discomfort or a moderate risk of accident or illness, such as temperature extremes, moving machinery, loud noises, and fumes. Ability to lift and carry up to 50 pounds in a physical environment. Ability to stand for periods of time up to and exceeding 60 minutes. Ability to make repetitive movements, such as using a 10-key or calculator, bending, or squatting. No travel required. Education and Experience HS Diploma or GED strongly preferred. Specialized skills training/certification may be required. Generally 2-5 years of experience in area of responsibility. Our Goals for Diversity, Equity, and Inclusion We are committed to creating a culture that promotes equity, respect, and advocacy for every HD Supply associate. We value the diversity of our people. Equal Employment Opportunity HD Supply is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

ARE YOU A CURRENT US FOODS EMPLOYEE? PLEASE APPLY DIRECTLY THROUGH OUR INTERNAL WORKDAY CAREER SITE Join Our Community of Food People! The Region Senior Buyer, Commodity utilizes category expertise and vendor specific knowledge to determine procurement and inventory management strategies for multiple warehouse locations across a Region. Acts as a subject matter expert and mentor for the buying function and are an integral member of the team that works on system and process enhancements across functions within the business unit. This role will execute business recovery strategy and will make key decisions as needed to support sales growth, profitability and helping our company become the undisputed best. This role will report to the Region Director, Commodity and work in conjunction with the region/area merchandising team, revenue management team, Region Commodity Procurement Manager and Area Director of Replenishment. For External Interest: Preference to be in Rosemont, IL Anchorage, AK, Seattle, WA, Portland, OR, Spokane, WA, Billings, MT Salt Lake City, UT, San Francisco, CA, Sacramento, CA, Fresno, CA, Reno, NV, Los Angeles, CA, Corona, CA, Phoenix, AZ or Las Vegas, NV. The role is segmented as Hybrid meaning the position will be onsite 2 days a month and virtual. Internal Interest: You must be located near a US Foods location and work PST hours . The role is segmented as Hybrid meaning the position will be onsite 2 days a month and virtual. ESSENTIAL RESPONSIBILITIES Daily duties and KPI monitoring: Based on the commodity strategy for the assigned areas, drive the core replenishment buying work for key commodity categories and work cross-functionally with region leadership to develop and execute buying strategies that support core KPIs. * KPI Reporting: Delivers on KPIs for Service Level, Days-Inventory-On-Hand (DIOH), Excess and Obsolete inventory (E&O) F2F, and Spoilage. * Inventory Monitoring: Proactively reviews projected out of stock reports daily and makes informed purchasing decisions, including resourcing substitute products where appropriate, to ensure we deliver on customer order fulfillment. Negotiate refunds and returns to vendor to compensate for losses incurred with spoiled or obsolete inventory. * Freight Income Management/ Managed Cases: Monitor GFI and identify opportunities to optimize. Will work closely with region logistics teams to develop strategies that support profitable solutions. * PO preparation: Analyzes economic order quantities, forecasts, lead times, vendor set-up, safety stock, etc., and uses discretion and independent judgment to create efficient purchase orders with our suppliers. * PO Buying: Owns the decision rights on PO execution and timing in alignment with the commodity strategy of the business. * Commodity Guidance: Develop a complete understanding for the market conditions that drive the commodity assigned. Analyze and execute the commodity guidance communicated on the weekly commodity guidance calls. * Order and Inventory Compliance: Monitor and manage TGP per case, ICC, Sales growth (output metrics that are collaboratively owned). * Communication Ambassador: Assists with the daily/weekly Market communication (mailbox, division calls) and effectively communicates on inventory requests and concerns that affect Sales. * Other duties as assigned by manager. RELATIONSHIPS * Internal: Regional and Area Frontline leaders and managers in Replenishment, Merchandising, Finance, Revenue Management, Logistics * External: Manage the relationship with the suppliers in the assigned commodity categories, interacting with the suppliers, Sales Reps and Customer Service Reps. WORK ENVIRONMENT * Hybrid: This role is partially remote, and the associate is expected to perform assigned responsibilities from a combined home-based and office-based environment. MINIMUM QUALIFICATIONS * 4+ years of direct inventory management/supply chain experience required. * Possess superior oral and written communication along with strong analytical skills. * Ability to communicate clearly and professionally with suppliers, sales, field partners and other business contacts via telephone, email, and video conferencing. * An understanding of the commodity landscape. * Must have a complete understanding of logistics and connection in support of an efficient distribution model. * Must be able to respond in high pressure situations to meet daily/weekly timelines with a high sense of urgency. * Exercises independent judgment and decision making in executing replenishment and inventory management activities. * Possesses a high degree of professionalism, tact, and persistence. * Proficiency required in the use of Microsoft Office especially Microsoft Excel and Word, as well as Microsoft Outlook. EDUCATION * Four-year college degree in business, operations, or supply chain management or equivalent experience. PREFERRED QUALIFICATIONS * Food service industry experience preferred. * Blue Yonder, JDA, SCPO experience preferred. This role will also receive annual incentive plan bonus. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: ********************************************** Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law (for example: state minimum wage thresholds). The expected base rate for this role is between $60,000 - $90,000 * EOE - Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Age/Genetic Information/Protected Veteran/Disability Status*

Certain roles at Tyson require background checks. If you are offered a position that requires a background check you will be provided additional documentation to complete once an offer has been extended . Job Details: Job Description This position has comprehensive responsibility for all functional areas of the plant to include; the efficient operations of three production shifts, maintenance personnel safety shipping receiving sanitation scheduling quality and process improvement. Other specific areas of responsibility include: administering contracts with service providers; motivating managers to provide guidance and programs to enhance the skill level of their Team Members; resolving issues related to the quality of incoming and outgoing goods; reviewing cost and performance data to help determine areas in need of improvement. This position also requires compiling a weekly efficiency report and obtaining approval and executing all capital improvements for the facility. This position is responsible for food safety food quality and legality. Other duties include initiating discussion and implementation of improvement in all phases of production assisting in identifying evaluating and correcting problems and performing other duties as the need arises. REQUIREMENTS: Education: Broad knowledge in a general or technical field normally acquired through four years of college resulting in a bachelor's degree or the equivalent experience. Experience: 5 plus years of relevant experience preferred. Previous successful experience at a similar level of responsibility or demonstrated preparation for a similar level of responsibility. Background in Beef, Pork, Ground Beef Case Ready Operations and or other processed meat production a plus. Computer Skills: Intermediate computer skills; knowledge and exposure to Enterprise Resource Planning, EAP computer systems, SAP, Oracle etc. Communication Skills: Above average ability to communicate both verbally and in writing. Supervisory: Responsible for managing several groups of personnel who perform diverse tasks and activities in several departments. Travel: 4 to10 trips per year. Priority consideration will be given to applicants at this facility, as well as priority for internal candidates impacted due to plant closure or job elimination. Resume will be required for consideration for this position. Relocation Assistance Eligible: Yes Work Shift: A Shift (United States of America) Hourly Applicants ONLY -You must complete the task after submitting your application to provide additional information to be considered for employment. Tyson is an Equal Opportunity Employer. All qualified applicants will be considered without regard to race, national origin, color, religion, age, genetics, sex, sexual orientation, gender identity, disability or veteran status. We provide our team members and their families with paid time off; 401(k) plans; affordable health, life, dental, vision and prescription drug benefits; and more. If you would like to learn more about your data privacy rights and how you may use that information, please read our Job Applicant Privacy Notice here. Unsolicited Assistance: Tyson Foods and its subsidiaries do not accept unsolicited support from external recruitment vendors for open positions within the United States. Any resumes or candidate profiles submitted by recruitment vendors or headhunters to any employee or applicant tracking system at Tyson Foods or its subsidiaries, without a valid written request and search agreement approved by HR, will be considered the property of Tyson Foods. No fees will be paid if the candidate is hired due to an unsolicited referral.

Preferred Qualifications Prior experience delivering merchandise to customers using a box truck or similar vehicle. 1+ years of experience operating material handling equipment. No more than 2 minor accidents in the past rolling 3 years. No more than 2 moving violations in the past rolling 3 years. Wholesale distribution experience. Job Summary Makes deliveries to customers using a company-provided or rental vehicle. Maintains records of deliveries, inspects and maintains delivery vehicles, and provides customer service on order and delivery issues. This position requires operation of a company or rental vehicle, and this operation may be done during the average work week. If selected for this position, the company will continuously monitor Motor Vehicle Records (MVRs). A requirement of this position is an acceptable MVR status and a valid driver's license. Major Tasks, Responsibilities, and Key Accountabilities Delivers customer orders safely within a service area, including interfacing with customers on order issues. Follows the planned route for timely deliveries while adhering to traffic laws and safety regulations. Loads inventory into trucks and unloads orders at customer sites using powered and non-powered material handling equipment. Provides exceptional customer service by being professional and polite during deliveries. Reviews order manifests to ensure customer orders and daily routes are complete and accurate. Performs pre- and post-trip inspections in accordance with Department of Transportation regulations and internal policies and procedures. Maintains routine contact with the distribution center to receive instructions on delivery interruptions, such as traffic congestion or missing orders. Prepares and maintains vehicle and customer order records in accordance with company policies and procedures. Contacts customers to provide updates on delivery statuses. Provides feedback to management on escalated customer service and sales-related issues. Nature and Scope Refers complex, unusual problems to supervisor. Under general supervision, exercises some judgment in accordance with well-defined policies, procedures, and techniques. Work typically involves regular review of output by a senior coworker or supervisor. Work Environment Typically located in a comfortable environment but with regular exposure to factors that may cause noticeable discomfort or a moderate risk of accident or illness, such as temperature extremes, moving machinery, loud noises, and fumes. Requires intermittent periods during which continuous physical exertion is required, such as walking, standing, stooping, climbing, lifting, and maneuvering material or equipment that may be heavy (50+ pounds) or awkward. Typically requires overnight travel less than 10% of the time. Education and Experience HS Diploma or GED strongly preferred. Specialized skills training/certification may be required. Generally 2-5 years of experience in area of responsibility. Our Goals for Diversity, Equity, and Inclusion We are committed to creating a culture that promotes equity, respect, and advocacy for every HD Supply associate. We value the diversity of our people. Equal Employment Opportunity HD Supply is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Certain roles at Tyson require background checks. If you are offered a position that requires a background check you will be provided additional documentation to complete once an offer has been extended. Job Details: Join Tyson Foods - Where Safety Comes First! At Tyson Foods, Safety is Always FIRST. Every Team Member is expected to uphold our safety standards, policies, and procedures. We provide all necessary Personal Protective Equipment (PPE) to ensure your well-being on the job. Multiple Shifts Available Start Times: 5:00 AM - 5:30 PM or 5:00 PM - 5:30 AM Schedule may vary; overtime and weekend work required as needed About the Role As a General Maintenance Technician, you will play a critical role in keeping our machinery running smoothly to ensure safe, reliable, and efficient production. You will complete computerized training programs using Tyson's SAP software and develop expertise in: * Equipment installation, maintenance, inspection, and repair * Hydraulic, plumbing, air systems, and electrical devices * Reading Piping and Instrumentation Diagrams (P&IDs) * Operating powered industrial lifting equipment * Collaborating closely with operations personnel You will use math skills for machinery speeds, fluid capacities, and critical dimensions. The role requires physical activity such as bending, twisting, reaching, moving around the department, and working on or under industrial equipment. Ability to lift up to 50 lbs is required. Qualifications * Willingness and ability to complete all required skilled trades training * Preference for candidates with formal industrial technical training (e.g., industrial maintenance, mechatronics, advanced manufacturing) * Flexible schedule to meet production needs * Ability to read, write, and interpret equipment manuals and technical instructions * Strong oral and written communication skills * Basic computer proficiency Maintenance Generalist: Must have at least 12 months of Industrial Maintenance experience in two or more of the following disciplines: * Rotating Machines * Pneumatics * Hydraulics * Electrical Distribution * Motor Control * Construction * Automotive or Powered Industrial Trucks * Plumbing * HVAC * Prime Power (Experience may be from multiple employers as long as it totals at least 12 months.) Completion of an Industrial Maintenance/Automation Technology Certificate from a US-based Technical School with classroom and hands-on training will be considered in lieu of experience. A combination of practical experience and formal education will also be considered. Basic computer skills required. Additional Information * Position open to candidates within the country of the posted location * Successful candidates must be able to perform physical job requirements with or without reasonable accommodation * Please attach a resume when applying * Rehires accepted after 365 days from last termination, with a maximum of 3 Tyson employments Tyson Foods is committed to creating a safe and inclusive workplace where every team member can thrive. Join us and be part of a team that values safety, teamwork, and growth! Relocation Assistance Eligible: No Work Shift: ALL SHIFTS (United States of America) Hourly Applicants ONLY -You must complete the task after submitting your application to provide additional information to be considered for employment. Tyson is an Equal Opportunity Employer. All qualified applicants will be considered without regard to race, national origin, color, religion, age, genetics, sex, sexual orientation, gender identity, disability or veteran status. We provide our team members and their families with paid time off; 401(k) plans; affordable health, life, dental, vision and prescription drug benefits; and more. If you would like to learn more about your data privacy rights and how you may use that information, please read our Job Applicant Privacy Notice here. Unsolicited Assistance: Tyson Foods and its subsidiaries do not accept unsolicited support from external recruitment vendors for open positions within the United States. Any resumes or candidate profiles submitted by recruitment vendors or headhunters to any employee or applicant tracking system at Tyson Foods or its subsidiaries, without a valid written request and search agreement approved by HR, will be considered the property of Tyson Foods. No fees will be paid if the candidate is hired due to an unsolicited referral.

PURPOSE Gain industry and organizational knowledge through daily business interactions and job assignments. Work is performed under direct supervision. Our DoD SkillBridge Internship is open for all active-duty service members within the last 180 days of their service contract with commanding officer approval. ESSENTIAL DUTIES AND RESPONSIBILITIES Assists with various projects in support of the department May perform duties such as gathering and organizing data to provide information for departmental special projects or reports. Participate in team meetings and brainstorming sessions. May work with cross-functional teams to achieve project goals. SUPERVISORY RESPONSIBILITIES Will be dependent on the internship positions selected for. MINIMUM REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Must be active-duty military in good standing with the DoD within the last 180 days of service contract. Must receive commanding officer approval to participate. COMPETENCIES Strong oral, written, and communication skills Ability to work well with diverse groups of people Comfortable talking with and interacting with others Knowledgeable in Microsoft Office and Outlook WORK ENVIRONMENT / PHYSICAL ACTIVITY The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work may be in an office or on the job site setting and generally sedentary, but position may involve walking or standing for brief periods of time. May be required to occasionally lift, carry, push, pull or otherwise move objects up to 80 pounds. *This is an unpaid, non-benefit eligible internship position in partnership with the DoD SkillBridge program.

We are seeking an experienced Truss Designer who is currently located in Utah and knowledgeable in Utah building codes and design requirments. This role is ideal for a seasoned professional who has hands-on experience designing residential and/or commercial truss packages and can step in with minimal training. If you are passionate about precision, collaboration, and delivering structurally sound designs, we'd love to connect. This position is not intended for entry-level designers or candidates outside of Utah. PURPOSE This individual is responsible for creating designs and drawings prepared directly from information submitted on a company order form, client's customer selection sheet, repeated from previous jobs, or from information developed by a design manager. ESSENTIAL DUTIES AND RESPONSIBILITIES Collaborate with outside sales personnel and customers to accurately complete, safe and quality structures. Assures stability, deflection and load carries in a manner that will meet or surpass codes associated with each project. Follow quality control procedures for completeness, accuracy, and code compliance for the implementation of design standards. Confers with client, technical staff, and other Design Services personnel, and prepares design modifications as required. Develop and complete design details from original concept drawings and prepare layouts. Review design(s) for most efficient and profitable use of inventory, equipment, and labor as time permits. Demonstrate a commitment to the quality improvement process and the philosophy of continuous improvement. Other Duties as assigned. MINIMUM REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Associate's degree (A. A.) or equivalent from two-year college or technical school; or six months to one-year related experience and/or training; or equivalent combination of education and experience. COMPETENCIES Preferably experience with MS Word, MS Excel, and Mitek Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. WORK ENVIRONMENT / PHYSICAL ACTIVITY The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand and sit and occasionally required to walk. The employee must occasionally lift and/or move up to 50 pounds. Subject to both typical office environment and outside locations with temperature and weather variations. The employee is regularly required to use close vision (clear vision at 20 inches or less) and color vision (ability to identify and distinguish colors). While performing the duties of this job, the employee is subject to quiet conditions, such as those in a library or private office. #slcmarchstreetlocation

American Fork UT- Millwork Install 268 E 1600 S (84003), 268 E 1600 S, American Fork, Utah, Ignite your career at Builders FirstSource, America's largest supplier of building materials, value-added components and building services to the professional market. The #1 name in our industry, we help make the dream of home ownership more achievable every day. At BFS, you'll be equipped with all the tools, training, and resources you need, and you'll be empowered to try new things, gain new experiences, and build a career with unlimited horizons. PURPOSE Under direct supervision, Maintenance Technician I is an entry level position and is responsible for conducting machine setup, troubleshooting, repairs, and preventive maintenance service with basic efficiency. They may also be responsible for resolving warranty and non-warranty repairs to damaged products. Performs duties under the direction of the Maintenance Manager and Leads. ESSENTIAL DUTIES AND RESPONSIBILITIES Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions. Locates sources of problems by observing mechanical and electrical devices in operation; listening for problems; using precision measuring and testing instruments. Removes defective parts by dismantling devices; using hoists, cranes, and hand and power tools; examining form and texture of parts. Determines changes in dimensional requirements of parts by inspecting used parts; using rules, calipers, micrometers, and other measuring instruments. Adjusts functional parts of devices and control instruments by using hand tools, levels, plumb bobs, and straightedges. Controls downtime by informing production workers of routine preventive maintenance techniques; monitoring compliance. Fabricates repair parts by using machine shop instrumentation and equipment. Maintains equipment, parts, and supplies inventories by checking stock to determine inventory level; anticipating needed equipment, parts, and supplies; placing and expediting orders; verifying receipt. Conserves maintenance resources by using equipment and supplies as needed to accomplish job results. Provides mechanical maintenance information by answering questions and requests. Prepares mechanical maintenance reports by collecting, analyzing, and summarizing information and trends. Maintains technical knowledge by attending educational workshops; reviewing technical publications; establishing personal networks. Maintains continuity among work teams by documenting and communicating actions, irregularities, and continuing needs. Maintains safe and clean working environment by complying with procedures, rules, and regulations. Contributes to team effort by accomplishing related results as needed. Performs building, lighting, and plumping repairs for Facility as needed. Other duties may be assigned Some positions may: Conduct service/repairs, assist with warranty issues, and file warranty reports with vendors. Provide on-site assistance to help troubleshoot and repair product and/or equipment. Plan and coordinate activities concerned with investigating and resolving customer reports of problems. Review performance reports and documentation from customers and sales representatives and inspect malfunctioning or damaged product to determine nature and scope of problem. Analyze review and inspection findings to determine source of problem, and recommend repair, replacement, or other corrective action. Maintain high accuracy in performing service work on product per work order specifications. Provide a communication link between the customer and the Company to help ensure that effective service is provided to the customer. Back up other maintenance technicians as needed. Inform supervisor of any shortages in stock, or of any malfunctions or damage to equipment or vehicles. Help load trucks for delivery and assist in unloading incoming trucks. Restock incoming supplies, keep tools and machinery clean and maintained, and is responsible for all tools assigned to truck. Maintain truck by keeping it clean and organized. Check fluids and tire pressure daily. MINIMUM REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. High school diploma or general education degree (GED); 1 - 2 years of related experience (Finish carpentry includes hanging doors) Or equivalent combination of education and experience. Valid driver's license COMPETENCIES Ethical Conduct Problem Solving/Analysis Technical Capacity Attention to detail Knowledge of industry safety practices Knowledgeable in the use of a variety of hand and power tools Language Skills-The ability to read a limited number of two- and three-syllable words and to recognize similarities and differences between words and between series of numbers. The ability to print and speak simple sentences. Reasoning Ability-Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Knowledgeable in diagnosing and repairing interior and exterior doors. WORK ENVIRONMENT / PHYSICAL ACTIVITY The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work flexible hours including over time as needed. Will be required to drive to other facilities and job sites. Regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms and stoop, kneel, crouch, or crawl. Frequently required to sit. Occasionally required to climb or balance and talk or hear. Must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 75pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision and depth perception Regularly exposed to moving mechanical parts and outside weather conditions. Frequently exposed to fumes or airborne particles and risk of electrical shock. Occasionally exposed to high, precarious places and vibration. The noise level in the work environment is usually moderate Will be required to meet with and communicate with home owners. At BFS, we want you and your career to be greater than what you ever could have expected. Our supportive, people -first culture will build you up and empower you to do more, be more, and become better every day. Join us and see what's possible when you can rise to new challenges, learn new skills, and add to your career tool belt every day. At Builders FirstSource, we offer competitive, affordable benefits designed to make life better for you and the people you love. Our goal is simple - provide great plans that help you and your family to live happier, healthier and more secure lives. To view all our benefit offerings click here ********************* #afmillworkinstalllocation

Inside Sales Representative American Fork, Utah PURPOSE Under direct supervision, provides sales and customer service activities primarily related to retail customers utilizing knowledge of sales techniques and industry knowledge. ESSENTIAL DUTIES AND RESPONSIBILITIES Provides customer service primarily to retail customers, via walk-in, telephone or email, including assisting with customer inquiries on product selection, pricing, availability, refunds/exchanges requiring a working knowledge of company products, procedures and practices. Actively engages in selling company products/services and related items. Provides material estimates and quotes for small packages (stairs, decks, fences, sheds, etc.). Enters orders into system and schedules delivery of products. Plans and paces own work efficiency in order to meet daily, weekly, project, or team related productivity goals. Participates in coordinating and conducting customer workshops. Handles and resolves simple customer complaints and forwards more complex issues to more senior staff for resolution. Assists with store housekeeping, signage, stocking, inventory control, and other related activities. Understands and observes all safety procedures and practices in order to prevent injury to self or co-workers; attends periodic safety meetings as required; may recommend changes to improve safety procedures. Other duties may be assigned. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. MINIMUM REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. High school diploma or General Education Degree (GED) and six (6) months sales-related experience; or equivalent combination of education and experience. COMPETENCIES Knowledge of company products, competitor's products and company standards Knowledge of company product pricing, discount and estimating formulas and guidelines Good verbal and written communication skills Demonstrates strong detail orientation skills Strong customer service skills Knowledge of basic sales techniques, concepts and the ability to influence and persuade Proficient in Microsoft Office Suite and an enterprise resource planning (ERP) program Knowledge of and ability to use motorized and non-motorized material handling equipment WORK ENVIRONMENT / PHYSICAL ACTIVITY The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Subject to both typical office environment and outside locations with temperature and weather variations. Must be able to lift and carry up to 25 pounds frequently and on occasion up to 80 pounds. Standing or walking for 80% of the day. Stooping and kneeling throughout the day. Occasionally will use hand tools, saws, forklift, pallet jack to assist customers. Reaching-extending the hand(s) and arm(s) in any direction. #afwindowslocation

ARE YOU A CURRENT US FOODS EMPLOYEE? PLEASE APPLY DIRECTLY THROUGH OUR INTERNAL WORKDAY CAREER SITE (********************************************************** Join Our Community of Food People! **BECOME A US FOODS DRIVER!** **THIS APPLICATION IS ONLY AVAILABLE FOR TROOPS 2 TRANSPORTATION STUDENTS** Ready to build a career with a company that's leading the foodservice industry? **Benefits** medical, dental, vision, 401K, life insurance, strong safety culture, and much more! Excellent local leadership. **US Foods** is one of the largest food distributors with a culture and history of promoting from within, excellent training programs and a continuous improvement focus. **Main Ingredients of the Job** + Safely drive trucks to customers and meet scheduled customer delivery times + Carefully unload products from the trailer with a two-wheeler, pallet jack, or by hand and place in designated customer storage areas + Verify accuracy of delivery with customers and obtain proper signatures + Handle collections and payments from customers when applicable + Professionally perform customer service responsibilities to enhance our client experience + Perform all pre-trip and post-trip equipment inspection **Physical Requirements** + Ability to lift/carry/push/pull 20 to 80+ lbs. of product repetitively during each shift required + Comfortable driving and working in inclement weather conditions with frequent stops (10+ per shift) required **What You Bring to the Table** + **Register to the FMCSA Clearinghouse*** + Must be at least 21 years of age + Must have valid CDL Class A issued by the state of legal residence with necessary endorsements and DOT qualifications + Minimum of six months commercial driving experience (any industry) OR three months commercial driving experience in the food and/or beverage delivery industry required + Ability to operate manual transmission preferred; may be required in specific locations + Must be able to read and communicate in the English language - able to hold a conversation, to understand highway traffic signs and signals, to respond to official inquiries, and to enter information on reports and records. **Why US Foods** US Foods _ _ helps our customers _Make It_ , with products and services that shape the communities where we live and work. Opportunities in our company abound for skilled, forward-thinking associates. Great drivers are crucial to the US Foods team and one of the important faces of our organization. On and off the road, our drivers strive for integrity and reliability, while building trusting relationships with customers. At the foundation of those efforts are our cultural beliefs, the pillars that define our work ethic, collaborative spirit and service. Together we help our customers make it, but we also believe in helping our drivers make it! At US Foods _ _ , we are committed to Total Rewards that respect and reward our associates for their dedication and hard work. ***** Registering to the FMCSA Clearinghouse is a requirement by the Department of Transportation. All Drivers are required to the Clearinghouse website and register to the new database. The Clearinghouse is a secure online database that provides real-time information about commercial driver's license (CDL) and commercial learner's permit (CLP) holders' drug and alcohol program violations. If you have not registered to the FMCSA database, please note registration is required. Please visit ******************************************** and click GO to login. If you are able to log into login, but are having trouble with the Clearinghouse registration, see "Clearinghouse Help" field on the clearinghouse page. *****EOE - Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/** **Age/Genetic Information** **/Protected Veteran/Disability Status***** Puede ver este sitio de empleo y aplicación en español utilizando la configuración de su navegador o teléfono móvil. Haga clic a continuación para obtener más información. Microsoft Edge (*************************************************************************************************** Google Chrome Safari iPhone Androide (******************************************************************************************* US Foods is one of America's great food companies and a leading foodservice distributor, partnering with approximately 300,000 restaurants and foodservice operators to help their businesses succeed. With 28,000 employees and more than 70 locations, US Foods provides its customers with a broad and innovative food offering and a comprehensive suite of e-commerce, technology and business solutions. US Foods is headquartered in Rosemont, Ill., and generates more than $28 billion in annual revenue. Visit *************** to learn more. US Foods may collect personal information from you in connection with the application process. US Foods complies with the California Privacy Rights Act of 2020, and its policy may be found here (https://***************/content/dam/usf/pdf/Policies/HR/USF\_CCPA\_policy.pdf) **.** US Foods, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other basis prohibited by applicable law. Know Your Rights (https://***************/content/dam/usf/pdf/Policies/HR/Know\_Your\_Rights.pdf) Pay Transparency policy statement is available here (https://***************/content/dam/usf/pdf/Policies/HR/Pay\_Transparency\_Nondiscrimination\_Provision.pdf) US Foods is committed to working with and providing reasonable accommodation to individuals with disabilities. If reasonable accommodation is needed to participate in the interview process or to perform essential job functions, please contact our US Foods Application Accommodation Line at ************. You will be prompted to leave a message. Please state the specifics of the assistance needed and your contact information. A member of our HR department will return your call within two business days.

PURPOSE This is an entry-level position that performs repetitive assembly operations to mass-produce products such as windows, doors, trusses, panels, or stairs by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES Places parts in specified relationship to each other. Bolts, clips, screws, cements, or otherwise fastens parts together. Cut products to specific measurements as needed. Removes defective products as needed. Tends machines to perform force fitting or fastening operations on assembly line. Works at different workstations as production needs require. Works in environment where tasks change as varying models of product are produced. Cleans equipment, floors, and work areas according to safety procedures. Other duties may be assigned. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. MINIMUM REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. There are no requirements in terms of education or experience. Prior carpentry experience helpful. COMPETENCIES Ability to read and comprehend simple instructions. Ability to write simple correspondence. Verbal expression ability to effectively present information, in both individual and small group situations. Ability to add, subtract, multiply, and divide. Ability to read tape measure. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Overtime work could be involved. WORK ENVIRONMENT / PHYSICAL ACTIVITY The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is continuously required to stand; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is continuously required to walk. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must continuously lift and /or move up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee is continuously exposed to moving mechanical parts and may be exposed to airborne particles. The employee is frequently exposed to outside weather conditions; extreme cold; extreme heat; risk of electrical shock and vibration. The noise level in the work environment is usually loud. Will be required to wear ear plugs for noise protection as well as eye protection and other personal protective equipment required by the location.

**Job ID:** 11975 **Alternate Locations:** **Newell Brands** is a leading consumer products company with a portfolio of iconic brands like Graco , Coleman , Oster , Rubbermaid , Sharpie and Yankee Candle - and 24,000 talented teammates around the world. Our culture is built on values in action: Integrity, Teamwork, Passion for Winning, Ownership, and Leadership. We work together to win, grow, and make a real impact-supported by a high-performing, inclusive, and collaborative environment where you can be your best, every day. The Senior Manager, General Purpose Robotics Engineering & AI Enablement is responsible for leading the strategy, roadmap, and deployment of general-purpose and humanoid robotic solutions across the enterprise. This leader drives the identification, evaluation, and implementation of robotics use cases that enhance safety, productivity, quality, and cost efficiency in manufacturing, distribution, and corporate environments. While deep technical engineering and solution build will be heavily supported by external automation and technology partners, this role is accountable for owning the overall robotics portfolio, ensuring successful deployment at scale, and serving as the primary point of coordination across business, IT, and vendor teams. **Key Responsibilities** Strategy & Roadmap Ownership + Develop and maintain the multi-year roadmap for general-purpose and humanoid robotics solutions across plants, warehouses, and offices. + Translate business objectives into a prioritized portfolio of robotics initiatives, aligned to safety, operational excellence, and financial targets. + Continuously scan the robotics and automation landscape to identify emerging capabilities, platforms, and partners relevant to the enterprise. Solution Design & Use Case Definition + Lead cross-functional workshops to identify, assess, and refine robotics use cases, with specific emphasis on humanoid and general-purpose robotic applications. + Define functional requirements, success criteria, and high-level solution architectures for robotics deployments in partnership with engineering, IT, safety, and operations. + Ensure solutions are designed with scalability, reliability, and maintainability in mind, leveraging modular platforms and standard practices where possible. Deployment & Program Delivery + Own the end-to-end deployment lifecycle for robotics initiatives-from concept and pilot through scale-up and steady-state operations. + Coordinate site readiness, infrastructure, safety reviews, and change management activities required for successful robot deployment. + Establish clear KPIs and benefits tracking for each deployment; monitor performance and drive continuous improvement in collaboration with operations teams. External Partner & Vendor Management + Serve as the primary owner for relationships with robotics OEMs, system integrators, and automation partners delivering technical solutions. + Oversee partner scopes of work, delivery milestones, and quality standards, ensuring alignment to internal requirements and timelines. + Collaborate with Procurement, Legal, and IT on vendor selection, contracting, performance management, and technology governance. AI Enablement & Data Integration + Work with data, IT, and analytics teams to ensure robotics solutions are integrated into enterprise systems (MES, WMS, ERP, safety systems, etc.). + Guide how AI-enabled capabilities-such as perception, navigation, and task orchestration-are applied through partner solutions to improve robot performance and autonomy. + Promote standardized data collection, monitoring, and reporting from robotic systems to support diagnostics, optimization, and strategic decision-making. Stakeholder Engagement & Change Management + Engage plant leadership, frontline teams, and functional stakeholders to align on use cases, operating models, and ways of working with humanoid and general-purpose robots. + Develop training, communication, and adoption plans to ensure employees understand and effectively collaborate with robotic systems. + Champion a culture of safety and innovation, proactively addressing concerns and promoting the benefits of robotics to the workforce. Governance, Standards & Risk Management + Define and enforce standards for robotics deployments, including safety, cybersecurity, interoperability, and lifecycle management. + Partner with EHS, Security, and IT to ensure humanoid and mobile robots meet all applicable regulatory and internal compliance requirements. + Manage risks associated with robotics deployments, including operational disruption, vendor dependencies, and technology obsolescence. Team Leadership + Lead and develop a small internal team of robotics program managers / engineers focused on requirements, integration, and deployment oversight. + Foster strong collaboration across engineering, IT, operations, and HR to support workforce transformation as robotics adoption scales. **Required Qualifications** - Bachelor's degree in Engineering, Robotics, Mechatronics, Industrial Engineering, Computer Science, or a related field; advanced degree preferred. - 8+ years of experience in industrial automation, robotics, advanced manufacturing, or related fields, with at least 3-5 years in a leadership or program ownership role. - Demonstrated experience leading deployment of robotics solutions (e.g., industrial robots, AMRs, AGVs, humanoid or general-purpose robots) in production or logistics environments. - Proven track record of managing complex, multi-site technology programs and working with external system integrators and technology partners. - Strong understanding of operational processes in manufacturing and/or distribution and how robotics can be applied to improve safety, quality, and productivity. - Ability to translate business needs into functional and technical requirements and to communicate effectively with both technical and non-technical stakeholders. - Excellent stakeholder management, communication, and change management skills, including experience working with frontline and plant leadership teams. - Strong analytical, problem-solving, and organizational skills with the ability to manage multiple projects and deadlines simultaneously. **Preferred Qualifications** - Experience with humanoid robotics platforms, general-purpose robotic systems, or collaborative robots (cobots) in real-world use cases. - Familiarity with AI-enabled capabilities in robotics (e.g., computer vision, SLAM, task planning) delivered via partner solutions. - Experience in large, multi-site industrial or consumer goods environments, or other complex, asset-intensive operations. - Exposure to integration with enterprise systems (e.g., MES, WMS, ERP) and OT/IT environments. If you are passionate about shaping the future of work through general-purpose and humanoid robotics-and about delivering real, measurable value for the business and its people-we encourage you to apply. Newell Brands (NASDAQ: NWL) is a leading global consumer goods company with a strong portfolio of well-known brands, including Rubbermaid, Sharpie, Graco, Coleman, Rubbermaid Commercial Products, Yankee Candle, Paper Mate, FoodSaver, Dymo, EXPO, Elmer's, Oster, NUK, Spontex and Campingaz. We are focused on delighting consumers by lighting up everyday moments. Newell Brands and its subsidiaries are Equal Opportunity Employers and comply with applicable employment laws. EOE/M/F/Vet/Disabled are encouraged to apply.

Load Builder - Yard/Warehouse Spanish Fork, Utah PURPOSE Under general supervision performs routine loading and unloading of materials within yard or work site; assembles load packages into truck for delivery to customer job sites. ESSENTIAL DUTIES AND RESPONSIBILITIES Loads and unloads materials onto or from pallets, trucks or customer vehicles and installs strapping, bracing or padding to prevent shifting or damage in transit. Performs load-building, determining the appropriate weight, composition, and placement of load based on customer order and capacity of delivery vehicle to ensure load is balanced and safe for hauling. Reads work order or follows oral instructions to determine materials to be moved or loaded. Conveys materials to or from storage to designated area using hand truck, electric dolly, forklift or other device. Opens containers, units, slings and loads, using steel cutters, crowbar, claw-hammer or other hand tools. Attaches identifying tags or labels to materials or marks information on cases, bales or other containers so as to provide for correct identification of items. Understands and observes all safety procedures and practices in order to prevent injury to self or co-workers; attends periodic safety meetings as required; may recommend changes to improve safety procedures. Other duties may be assigned. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. MINIMUM REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. High school diploma or General Education Degree (GED) and three (3) months experience performing these or similar tasks; or equivalent combination of education and experience. Forklift certification required. COMPETENCIES Requires forklift operator certification Knowledge of company products sufficient to take into account weight, shape and handling requirements Ability to read and write to handle work orders and labeling tasks Manual dexterity Ability to use simple hand tools Knowledge of safety procedures while performing forklift driving and materials handling tasks Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions Ability to count items and verify against prepared lists. WORK ENVIRONMENT / PHYSICAL ACTIVITY The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work is performed within a production or yard environment, subject to temperature variations, hazardous chemicals, mechanical parts, equipment noise and dust. Must be able to lift and carry up to 25 pounds frequently and on occasion up to 80 pounds. May be required to perform specific tasks that involve climbing, lifting, pushing or kneeling.

**Job ID:** 10322 **Alternate Locations:** **Newell Brands** is a leading consumer products company with a portfolio of iconic brands like Graco , Coleman , Oster , Rubbermaid , Sharpie and Yankee Candle - and 24,000 talented teammates around the world. Our culture is built on values in action: Integrity, Teamwork, Passion for Winning, Ownership, and Leadership. We work together to win, grow, and make a real impact-supported by a high-performing, inclusive, and collaborative environment where you can be your best, every day. The Associate Manager, Tax Incentives & Grants will support the Manager in identifying, understanding, and obtaining government incentives at the local, state, and federal levels. This includes supporting applications for tax credits, grants, and other opportunities such as R&D tax credits, educational programs, and facilities & infrastructure grants. This role requires strong analytical skills and attention to detail to assist in the successful execution of incentive strategies and compliance with regulatory requirements. **Key Responsibilities** + Conduct research on government incentive programs and regulatory requirements, including tax credits, grants, and other programs. + Assist in the preparation and submission of incentive applications and documentation. + Track and monitor the status of incentive applications and compliance with deadlines and requirements. + Compile and analyze data to support incentive applications and reporting. + Maintain up-to-date records of all incentive-related activities and documentation. + Manage and coordinate tax audits, inquiries, and notices from tax authorities regarding incentive claims. + Assist in preparing reports and presentations for senior management on incentive programs and their impacts. + Collaborate with internal teams to gather necessary information for incentive applications. + Provide administrative support to ensure the smooth functioning of the government incentives function. + Ensure all claims and applications comply with tax regulations and firm standards. This includes preparing and reviewing documentation to support the company's claims. **Qualifications** + Bachelor's degree in business, finance, public administration, economics, or a related field. + 3-5 years of experience in tax incentives, government programs, regulatory affairs, or a related area (internships or co-op experience may be considered). + Strong research and analytical skills with the ability to interpret policy and financial data. + Clear and professional written and verbal communication skills. + Highly organized and detail-oriented, with the ability to manage multiple priorities. + Proficiency in Microsoft Office Suite (Excel, Word, PowerPoint); familiarity with data tools or ERP systems is a plus. + Self-starter with the ability to work independently and collaboratively in a cross-functional environment. Newell Brands (NASDAQ: NWL) is a leading global consumer goods company with a strong portfolio of well-known brands, including Rubbermaid, Sharpie, Graco, Coleman, Rubbermaid Commercial Products, Yankee Candle, Paper Mate, FoodSaver, Dymo, EXPO, Elmer's, Oster, NUK, Spontex and Campingaz. We are focused on delighting consumers by lighting up everyday moments. Newell Brands and its subsidiaries are Equal Opportunity Employers and comply with applicable employment laws. EOE/M/F/Vet/Disabled are encouraged to apply.

**Mon-Fri, 5am-10am** **Preferred Qualifications** + Prior experience working in multiple departments in a distribution center. + Previous experience operating material handling equipment. + Ability to understand written material. Works in multiple departments within a distribution center, including case pick, shipping, receiving, returns, loading, order processing, and replenishment. Operates material handling equipment to move inventory within the facility. **Major Tasks, Responsibilities, and Key Accountabilities** + Uses material handling equipment to locate and deliver products, supplies, and equipment to designated areas. + Assists with staging and loading orders into trucks for customer delivery. + Verifies quantity and quality of incoming products from vendors and distribution centers. + Uses packing list information to collect items for customer orders, including building and wrapping pallets of products. + Examines and inspects stock items for wear and defects and notifies management of inventory issues. + Returns misplaced products to proper storage areas. + Maintains a clean working environment in accordance with company safety policies. + Performs inventory control functions as needed. **Nature and Scope** + Refers complex, unusual problems to supervisor. + Under general supervision, exercises some judgment in accordance with well-defined policies, procedures, and techniques. Work typically involves regular review of output by a senior coworker or supervisor. **Work Environment** + Typically located in a comfortable environment but with regular exposure to factors that may cause noticeable discomfort or a moderate risk of accident or illness, such as temperature extremes, moving machinery, loud noises, and fumes. + Ability to lift and carry up to 50 pounds in a physical environment. Ability to stand for periods of time up to and exceeding 60 minutes. Ability to make repetitive movements, such as using a 10-key or calculator, bending, or squatting. + No travel required. **Education and Experience** + HS Diploma or GED strongly preferred. Specialized skills training/certification may be required. Generally 2-5 years of experience in area of responsibility. **Our Goals for Diversity, Equity, and Inclusion** We are committed to creating a culture that promotes equity, respect, and advocacy for every HD Supply associate. We value the diversity of our people. **Equal Employment Opportunity** HD Supply is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. HD Supply is an Equal Opportunity Minority/Female/Individuals with Disabilities/Protected Veteran and Affirmative Action Employer. HD Supply considers for employment and hires qualified candidates without regard to age, race, religion, color, sex, sexual orientation, gender, gender identity, national origin, ancestry, citizenship, protected veteran or disability status or any factor prohibited by law.

Class A CDL Driver West Jordan, Utah PURPOSE Responsible for driving delivery vehicles and/or operating truck-trailer combinations to transport and deliver materials to customer sites. Adheres to driver safety/compliance regulations, delivers un-damaged goods on schedule, and provides professional service to customers. Drives vehicle weighing greater than 26,000 pounds and may tow vehicles or trailers greater than 10,000 pounds. ESSENTIAL DUTIES AND RESPONSIBILITIES May load or assist with loading and appropriately securing product, materials, or supplies inside delivery vehicle. Delivers customer orders to specified delivery site. Maneuvers vehicles into loading or unloading positions and ensures that vehicle and loading equipment are properly positioned. Assists customers with unloading materials safely and accurately. Takes all precautions to protect the product and the customer's property. Verifies order details and maintains logs of delivery duties including amounts and/or weights of items, mileage and locations of deliveries. Checks items against invoice to ensure order accuracy. Acts as a customer service liaison between the company and the site customer. Handles customer concerns and helps resolve issues as they arise. Maintains the cleanliness and appearance of delivery vehicles; performs routine safety checks to ensure vehicles comply with company guidelines. Required to use hand held devices, except for while driving, to ensure compliance with DVIR and HOS. Maintain hours of service logs and pre/post trip inspection procedures. May perform credit/product return pick-ups and related paperwork. Operate a Forklift or non-motorized material handling equipment to load and off load materials to designated areas. Understands and observes all safety procedures and practices in order to prevent injury to self or co-workers; attends periodic safety meetings as required; may recommend changes to improve safety procedures. Other duties as assigned. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. MINIMUM REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. High School Diploma or GED, 21+ years old, valid driver's license and a class A CDL license. A minimum of 1 year of delivery driving experience. 2 years of CDL driving experience are strongly preferred. Valid driver's license Class A CDL license Pass MVR report Obtain a DOT medical card within five (5) days of a request Have less than 5 moving violations in the last 5 years Basic math & measurement skills Ability to read and speak the English language COMPETENCIES Relationship Building: Builds working relationships and seeks to resolve issues constructively. Teamwork: Knows and supports teammates' work and deliverables. Encourages team unity through sharing information or expertise. Customer Focus: Listens to, anticipates and responds to customer needs. Conflict Resolution: Manages difficult situations professionally and partners with others to achieve mutually beneficial results. WORK ENVIRONMENT / PHYSICAL ACTIVITY The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work is performed within a production environment, subject to temperature variations, hazardous chemicals, mechanical parts, increased noise levels and dust. Must be able to lift and carry up to 100 pounds frequently and on occasion may be required to lift and carry, with assistance, up to 200 pounds. May be required to perform specific tasks that involve climbing, lifting, pushing or kneeling. Must be able to physically operate delivery vehicles (climb up and down into cab, twist torso for 360 degree visibility, use arms to operate controls, etc.). Builders FirstSource is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status or status as an individual with a disability. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Builders FirstSource, please call ************** or email: ADA.Accommodation@bldr.com. Please do not send resumes to this email address - it is intended only to be used to request an accommodation in submitting an application for a job opening. #westjordanlocation

PURPOSE Gain industry and organizational knowledge through daily business interactions and job assignments. Work is performed under direct supervision. Our DoD SkillBridge Internship is open for all active-duty service members within the last 180 days of their service contract with commanding officer approval. ESSENTIAL DUTIES AND RESPONSIBILITIES Assists with various projects in support of the department May perform duties such as gathering and organizing data to provide information for departmental special projects or reports. Participate in team meetings and brainstorming sessions. May work with cross-functional teams to achieve project goals. SUPERVISORY RESPONSIBILITIES Will be dependent on the internship positions selected for. MINIMUM REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Must be active-duty military in good standing with the DoD within the last 180 days of service contract. Must receive commanding officer approval to participate. COMPETENCIES Strong oral, written, and communication skills Ability to work well with diverse groups of people Comfortable talking with and interacting with others Knowledgeable in Microsoft Office and Outlook WORK ENVIRONMENT / PHYSICAL ACTIVITY The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work may be in an office or on the job site setting and generally sedentary, but position may involve walking or standing for brief periods of time. May be required to occasionally lift, carry, push, pull or otherwise move objects up to 80 pounds. * This is an unpaid, non-benefit eligible internship position in partnership with the DoD SkillBridge program.

We are seeking an experienced Truss Designer who is currently located in Utah and knowledgeable in Utah building codes and design requirments. This role is ideal for a seasoned professional who has hands-on experience designing residential and/or commercial truss packages and can step in with minimal training. If you are passionate about precision, collaboration, and delivering structurally sound designs, we'd love to connect. This position is not intended for entry-level designers or candidates outside of Utah. PURPOSE This individual is responsible for creating designs and drawings prepared directly from information submitted on a company order form, client's customer selection sheet, repeated from previous jobs, or from information developed by a design manager. ESSENTIAL DUTIES AND RESPONSIBILITIES Collaborate with outside sales personnel and customers to accurately complete, safe and quality structures. Assures stability, deflection and load carries in a manner that will meet or surpass codes associated with each project. Follow quality control procedures for completeness, accuracy, and code compliance for the implementation of design standards. Confers with client, technical staff, and other Design Services personnel, and prepares design modifications as required. Develop and complete design details from original concept drawings and prepare layouts. Review design(s) for most efficient and profitable use of inventory, equipment, and labor as time permits. Demonstrate a commitment to the quality improvement process and the philosophy of continuous improvement. Other Duties as assigned. MINIMUM REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Associate's degree (A. A.) or equivalent from two-year college or technical school; or six months to one-year related experience and/or training; or equivalent combination of education and experience. COMPETENCIES Preferably experience with MS Word, MS Excel, and Mitek Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. WORK ENVIRONMENT / PHYSICAL ACTIVITY The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand and sit and occasionally required to walk. The employee must occasionally lift and/or move up to 50 pounds. Subject to both typical office environment and outside locations with temperature and weather variations. The employee is regularly required to use close vision (clear vision at 20 inches or less) and color vision (ability to identify and distinguish colors). While performing the duties of this job, the employee is subject to quiet conditions, such as those in a library or private office. #slcmarchstreetlocation