Hawkins jobs in Minneapolis, MN - 117596 jobs

This position is responsible for ensuring the production of safe, high-quality food products in compliance with regulatory, customer, and company standards. This role leads the facility's food safety and quality programs, oversees compliance with HACCP, FSMA, and GFSI requirements, and provides leadership to QA and sanitation teams to maintain continuous improvement in quality systems and plant hygiene. Essential Functions Quality Assurance & Compliance Manage and maintain the plant's Quality Management System (QMS) to meet internal, customer, and third-party audit requirements. Oversee daily QA operations including product testing, process verification, and documentation review. Lead and coordinate internal, customer, and regulatory audits (FDA, USDA, State, GFSI). Investigate non-conformances, implement root cause analysis, and ensure timely corrective and preventive actions (CAPAs). Ensure compliance with labeling, allergen control, and traceability requirements. Maintain accurate and complete quality and production records in compliance with regulatory standards. Food Safety & HACCP Serve as the plant's PCQI (Preventive Controls Qualified Individual). Oversee implementation, verification, and validation of food safety programs including HACCP, FSMA Preventive Controls, environmental monitoring, and supplier verification. Lead the Food Safety Team and ensure effective communication of food safety objectives across departments. Monitor trends in microbiological results, environmental swabs, and product testing to proactively identify risks. Leadership & Training Develop and deliver employee training on GMPs, food safety, allergen control, sanitation, and quality awareness. Promote a culture of food safety and continuous improvement throughout the facility. Collaborate cross-functionally with Production, Maintenance, and Sanitation teams to ensure alignment with quality objectives. Continuous Improvement Analyze process data to identify opportunities for quality improvement and waste reduction. Support implementation of initiatives related to product quality and safety. Recommend and validate changes to formulations, processes, or equipment to improve quality performance. Competencies Page Break Problem Solving/Analysis Works independently Dependable Strong Communication Skills Teamwork Innovative Computer Skills Time Management/Initiative Attentive to detail Trainable Page Break Supervisory Responsibility This position will have direct supervisory responsibility for a portion of the Quality Assurance team. Work Environment This job operates in a plant environment and office. While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles, moving mechanical parts and vibration. Exposed to extreme temperature variations. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands for this position are approximately 60% active and 40% sedentary work. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently will need to sit, stand, walk and climb stairs. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 40 pounds. Position Type/Expected Hours of Work This is a full-time position. Typical schedule is Monday through Friday with occasional evening and weekend work possible based on specific project needs. Travel Less than ten percent travel expected for this position. Required Education, Experience & Certifications Bachelor's degree in related field and/or a minimum of 10 years' experience in food manufacturing quality assurance and/or sanitation leadership. Knowledge of food safety regulations including HACCP, GMP, FSMA and SQF. Strong leadership and team management experience. Ability to conduct audits, troubleshoot quality issues and implement improvements. Preferred Education, Experience & Certifications Master's degree in food science. Bilingual in English/Spanish. Preventive Controls Qualified Individual certification. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of responsibilities, duties or tasks that are required of the employee for this job. Responsibilities, duties and tasks may change at any time with or without notice. Monday - Friday; night or weekends as needed for projects 8:00 am - 5:00 pm

Great Opportunity at MI Windows and Doors in Millersburg!! Weekend Shift Available (Friday - Sunday schedule - 6am - 6pm) Starting Hourly Rate is $ plus $ Shift differential! Operators are to communicate clearly with the laborer to ensure quality production. Inspect all parts before and after lamination. Set the machine up and do changeovers to meet the plant's demands. If you take pride in what you do and have a desire and ambition to tackle new challenges, then we have an opportunity for you! Our company offers a very robust Benefit Package which includes Company-Funded Health Savings Account & Paid Holidays! Come Grow with MITER! We are a local, family-owned company with a coast-to-coast presence. We offer cross training and opportunities for career growth. We encourage our team members to take on new roles, advance their careers and offer tuition reimbursement. Team member health and safety are top priorities. POSITION SUMMARY: Lamination-Laborer is to assist the operator with machine setup. Also will cut scrap, foil and primer pads when needed. Load and unload parts from baskets and stack them on the table. Feed and cut parts going into and coming out of the machine. Follow the general instructions of the operator. ESSENTIAL FUNCTIONS: 1. Loading and unloading of parts from baskets and/or trailers. 2. Trim and Wool (bulb) parts (with correct wool/bulb in correct slot). 3. Inspect quality before and after lamination. 4. Cut scrap when needed. 5. Cut and set primer pads, ensures proper coverage for the entire run. 6. Set drive and guide wheels. 7. Read and understand lamination schedules. 8. Count parts. 9. Distinguish types and color of foils. 10. Change glue on hot melt system when needed. 11. Clean and prep glue head. 12. Set up slitter and cut foil to correct sizes. 13. Able to read and understand lamination prints. 14. Work together as a team and communicate with each other. 15. Clean up after each run and prepare for the next. 16. Performs additional duties as assigned. QUALIFICATIONS: Must possess a valid PA driver's license and a working telephone. KNOWLEDGE / SKILLS / EXPERIENCE: 1. High school graduate or GED are required. 2. Must be able to read/write and understand the English language. 3. Must be able to compute basic math, adding, subtracting, multiplication & division. 4. Must be able to use/read a tape measure, and saws. 5. Basic knowledge and use of hand tools. 6. Computer skills/knowledge of general computer operations. 7. Able to perform essential functions with or without accommodation. 8. Must possess a valid PA driver's license and a working telephone. 9. Ability to concentrate and pay close attention to perform the essential job functions. 10. Interpersonal skills are necessary in order to effectively communicate with co-workers. What We Offer Our benefits package includes coverage of your health, wealth, and wellness for you and your eligible spouse/dependents. We offer a competitive salary and benefits package, including a 401k with company match and generous paid time off to help you balance your life. Below is a list of benefits you will enjoy while working with our company. - Three comprehensive Medical plan options Prescription Dental Vision - Company Paid Life Insurance - Voluntary Life Insurance - Supplemental Hospital Indemnity, Critical Illness, and Accident Insurance - Company-paid Short-Term Disability - Company-paid Long-Term Disability - Paid time off (PTO) and paid Holidays - 401k retirement plan with company match - Employee Assistance Program - Teladoc - Legal Insurance - Identity Theft Protection - Pet Insurance - Team Member Discount Program - Tuition Reimbursement - Yearly Wellness Clinic MITER Brands, also known as MI Windows and Doors, Milgard and PGT Industries are an equal-opportunity employer. The company does not discriminate based on religion, race, creed, color, national origin, sex, age, disability, handicap, veteran status, sexual orientation, genetic information, or any other applicable legally protected category.

We are seeking a highly organized, professional, and proactive Receptionist/Office Manager to join our Admin Team. This role will serve as the first point of contact for visitors and callers while ensuring the smooth operation of daily office functions. The ideal candidate is detail-oriented, personable, and capable of managing multiple priorities in a fast-paced construction environment. This role blends traditional office management responsibilities with front desk duties, supporting both administrative operations and visitor-facing interactions. *Position is Full-Time in our San Jose, CA Office Responsibilities Front Desk & Reception Serve as the primary point of contact for all incoming calls and visitors, providing a welcoming and professional customer experience. Manage the main phone line, screen calls, and direct inquiries to the appropriate team members. Receive deliveries, sort mail, manage visitor sign-in procedures, and maintain the front lobby's professional appearance. Office Administration & Coordination Oversee daily office operations, including ordering/stocking office snacks/supplies, coordinating vendor services, and maintaining office equipment including coffee machine. Support company leadership and project teams with administrative tasks such as document preparation, filing, scanning, and data entry as needed. Manage incoming and outgoing mail, shipping, and courier services. Team & Culture Support Work collaboratively to support the admin, HR, accounting, and leadership with clerical tasks. Help set up/take down internal events, trainings, and office gatherings. Qualifications 2+ years of administrative, office management, or receptionist experience; construction experience preferred. Excellent verbal and written communication skills. Strong organizational skills with the ability to prioritize and multitask effectively. Proficiency in Microsoft Office Suite (Word, Excel, Outlook); experience with construction software (e.g., Bluebeam or similar) is a plus. Professional demeanor with a customer-service mindset. Ability to maintain confidentiality and handle sensitive information. Preferred Skills Positive, team-oriented attitude. Strong attention to detail. Ability to anticipate needs and proactively solve problems. Comfortable interacting with guests, clients, vendors, and field staff. Reliable, punctual, and consistent in delivering high-quality administrative support. What We Offer Competitive compensation based on experience Comprehensive benefits package including 100% employer paid medical, dental and life insurance. Voluntary Vision Plan 401(k) with company match Paid vacation and holidays Employee Assistance Program (EAP) Team Building Events Pay range and Compensation package The base hourly range for this role is $31.25 -$40.87 per hour, Non-Exempt. The range is dependent on factors including, but not limited to, experience, skills, qualifications, relevant education and certifications. The range listed is just one component of the total compensation package for employees. Equal Opportunity Statement We are proud to be an Equal Opportunity Employer. All employment decisions-including recruitment, hiring, placement, promotion, compensation, training, layoffs, and termination-are made without regard to race, color, religion, creed, national origin, ancestry, sex, pregnancy, gender identity or expression, sexual orientation, age, disability, genetic information, marital status, veteran status, or any other characteristic protected by applicable federal, state, or local law.

About Omni Omni is a business intelligence and embedded analytics platform that helps customers improve self-service, accelerate AI adoption, and build customer-facing data products. Whether users prefer AI, spreadsheets, SQL, or point-and-click, Omni makes it easy for anyone to explore and act on data - all from the same platform. At the core of Omni's platform is a built-in semantic layer that ensures consistency, trust, and AI readiness. Headquartered in San Francisco, Omni has office hubs in Santa Cruz, Philadelphia, Dublin, and Sydney, with team members around the world. The company has raised $97M in funding from leading investors including ICONIQ Growth, Theory Ventures, First Round Capital, Redpoint Ventures, Google Ventures, Snowflake Ventures, and Databricks Ventures. The Role As a Technical Account Manager, you'll serve as a dedicated, strategic technical advisor for Omni's largest and most complex enterprise customers, partnering closely with Professional Services, Product, and Support teams. Your mission is to help top accounts achieve faster time-to-value, reduce inbound escalations, ensure long term success, and contribute reusable technical assets that scale with Omni's growth. You do this by partnering with Sales and Professional Services to design a scalable implementation plan, knowing and documenting the core use cases and nuances of your customers tech stack, and consistently working to ensure that all future technical recommendations are scalable as Omni platforms continue to evolve. TAMs blend technical expertise with customer-facing skills. You'll help enterprises embed Omni into their workflows, optimize performance, and expand their use of our BI platforms. Your work will directly influence adoption, retention, and expansion at scale. Responsibilities Act as the primary technical advisor for our top enterprise customers. Partner with Professional Services, Product, and Support teams to ensure customers achieve faster time-to-value and sustainable adoption. Guide customers on best practices for architecture, integrations, embedding, and data modeling. Proactively identify technical risks and create mitigation plans to reduce inbound escalations. Lead technical enablement workshops, health checks, and design reviews for customers, and internally to increase the subject matter expertise on the team. Help customers optimize query performance, dashboard usability, and user adoption. Serve as the technical voice of the customer internally, influencing product roadmaps and support processes. Build and maintain reusable implementation assets (templates, playbooks, technical documentation) that scale across Omni's customer base. Partner with Sales and Customer Success Managers to surface cross-sell and upsell opportunities through technical insight. Provide technical validation in expansion and renewal cycles. Influence Net Dollar Retention (NDR) by demonstrating the scalable value of Omni. What We're Looking For 5+ years in a technical customer-facing role (Customer Success Engineer, Technical Account Manager, Solutions Architect, or Data Consultant). Deep knowledge of data & analytics technologies: SQL, semantic layers, data warehouses (Snowflake, BigQuery, Redshift), BI platforms, APIs, embedding strategies. Strong architectural thinking: able to map complex data ecosystems to Omni's platform. Excellent communicator-comfortable engaging both C-level execs and data engineers. Consultative and proactive, with the ability to span multiple enterprise accounts. Strong problem-solving and attention to detail. Bonus Points Experience driving adoption and expansion in a SaaS analytics/BI environment. Familiarity with customer success frameworks and metrics (GRR, NDR, adoption KPIs). Track record of influencing enterprise technology strategy. Comfortable working with global teams and customers across time zones. Compensation & Benefits On Target Earnings (OTE): $145k-$208k, 70/30 salary-to-variable split. Comprehensive health, dental, and vision coverage. Equity in a fast-growing company. Flexible, collaborative work environment. #J-18808-Ljbffr

Job Title: Senior Construction Estimator - Mechanical Contracting Employment Type: Full-Time About the Role: We are seeking a Senior Construction Estimator with strong experience in mechanical contracting to join our Charlotte team. The ideal candidate will have a minimum of 5 years of estimating experience and a proven background in healthcare and/or data center projects. This position plays a key role in supporting preconstruction efforts, ensuring accurate cost estimates, and contributing to successful project delivery. Key Responsibilities: Prepare detailed cost estimates for mechanical systems, including HVAC, plumbing, and piping scopes. Review project plans, specifications, and design documents to develop accurate and competitive estimates. Analyze subcontractor and vendor quotes to ensure pricing accuracy and scope alignment. Collaborate with project managers, engineers, and clients during preconstruction to identify cost-saving opportunities and constructability options. Lead estimate reviews and provide clear documentation of assumptions, inclusions, and exclusions. Develop quantity take-offs and pricing for all phases of design and construction. Assist in preparing and presenting bid proposals and project budgets. Maintain current knowledge of market conditions, labor rates, and material pricing. Support junior estimators and help standardize estimating procedures and tools. Qualifications: Minimum 5 years of experience as a construction estimator in the mechanical contracting industry. Proven experience estimating healthcare and/or data center projects is required. Strong knowledge of mechanical systems (HVAC, plumbing, piping). Proficient with estimating software (e.g., Trimble, Bluebeam, FastPIPE/FastDUCT, or similar). Excellent analytical, organizational, and communication skills. Ability to read and interpret construction drawings and specifications. Bachelor's degree in Mechanical Engineering, Construction Management, or related field preferred.

Seeking a highly qualified Building Maintenance Manager to oversee, coordinate and manage the operation and maintenance of all Refrigeration, Boilers, HVAC, Electrical, Plumbing, and Fire/Life systems in a 27/7 commercial food service kitchen, in addition to managing a fleet of hi-lift trucks for aircraft catering, ramp vans, and other company vehicles. Essential Functions: Provide leadership, supervision, and schedule of the Maintenance Team, tasks specific to skills, training in all kitchen facility operations, and encourage ideas, methods, and processes for improvement. The daily operation is to repair and preventative maintenance (PM) of all MEP&R systems, fleet management, maintenance, and energy consumption and analysis. Must maintain daily system performance logs with monthly summaries for Upper Management reviews to predict future expenses and post against annual budgets. Must maintain and perform equipment PM tasks and record updates. Maintain a complete inventory of all major building systems, manage warranty issues, and keep a listing of available outside resources to complement in-house maintenance efforts. Conduct periodic inspections of the complete facility condition and infrastructure to ensure building upkeep and operational readiness-document and report deficiencies with recommended remediation. Create plans, develop, and implement new procedures to improve operations while minimizing costs. Must know requisition tools, equipment, and supplies required for operations. Ensure a safe work environment by watching and reporting on all safety issues, fire alarm status, and emergency systems. Coordinate with all department heads to schedule PMs and downtimes, resulting in minimal disruption to operations. Define the scope of work, bid reviews, and manage small capital projects. Other Responsibilities and duties will include, but not be limited to: Able to perform cycle time, helpful life analysis on major systems components, repair-vs-replacement recommendations, and appropriate record keeping. Able to direct other technicians and match available talents with tasks. Belief and attitude in the importance of cultivating and maintaining a high degree of maintenance, appearance, and customer service at all times. Effectively give and receive feedback; willing to ask questions and seek direction as needed. Must be able to function within a team environment. Must be able to perform tasks under general supervision. Competencies Excellent written and verbal communication. Possess critical evaluation and analytical skills. Leadership. Ethical practice. Critical to have advanced math skills. Ability to read building blueprints. Supervisory Responsibility This position will supervise a staff of maintenance technicians. Work Environment This job operates in a professional office environment, a food production environment, and outdoors. This role routinely uses standard office equipment and tools. Physical Demands The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. While performing the duties of this job, the employee is regularly required to talk or hear. The employee must frequently sit and stand for long periods and reach with hands and arms. The employee will work indoors and outdoors, with extreme temperatures possible in both environments. Position Type/Expected Hours of Work Full-time on-premise position. Days and hours of work are Monday through Friday, 8:30 a.m. to 5 p.m. This position regularly requires extended hours and occasional weekend work. Travel less than 10% Required Education and Experience Minimum of a B.A./B.S. degree in Engineering or an equivalent combination of education/certification and experience. Current Refrigeration, HVAC, Electrical, Plumbing, and Boiler Certifications Must have a minimum of 10 years in related management and supervisory experience. Must be skilled in reading building design blueprints. Proficiency in Microsoft Office Suite. Experience in managing service contracts. Preferred Education and Experience Experience with AutoCAD. Other Duties This job description does not cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee for this job. Duties, obligations, and activities may change at any time, with or without notice.

The Driver Helper is responsible in helping the Driver make the delivery process run smoothly. Merchandise must be unloaded and placed in the area specified. * Must be able to lift/pull/push

Job Overview - Construction Superintendent: Compensation: $90,000 - $140,000/year + bonus Atlantic Group is hiring a Construction Superintendent with our client in Raleigh, NC. This on-site role oversees ground-up construction projects, managing daily field operations, subcontractors, inspections, safety, and schedule execution. Ideal for an experienced GC superintendent with strong leadership and field management skills across industrial, manufacturing, tilt-wall, warehouse, or healthcare projects. Responsibilities as the Construction Superintendent: Field Leadership: Oversee all daily jobsite operations, ensuring safety, quality, productivity, and smooth execution of ground-up construction activities. Scheduling & Coordination: Manage project schedules, inspections, sequencing, and daily work planning to keep the project on track. Subcontractor Management: Direct and coordinate subcontractors, verify workmanship, resolve conflicts, and ensure adherence to plans and specifications. Safety & Quality Control: Enforce safety standards, maintain OSHA compliance, conduct site inspections, and ensure high-quality construction throughout the project. Documentation & Communication: Maintain daily reports, logs, and project documentation while providing consistent updates to owners, architects, engineers, and internal teams. Qualifications for the Construction Superintendent: Experience: 5-10 years of superintendent experience with ground-up construction across industrial, manufacturing, tilt-wall, warehouse, healthcare, or similar projects. Industry Background: Must come from a general contracting firm with field leadership experience managing large-scale, ground-up work. Technical Skills: Proficiency in construction software (Procore, Bluebeam, MS Project, or similar), blueprint reading, and jobsite documentation. Skills & Attributes: Strong leadership, communication, and coordination skills, with the ability to manage complex jobsite operations and multiple subcontractors simultaneously. Application Notice: Qualified candidates will be contacted within 2 business days of application. If an applicant does not meet the above criteria, Atlantic Group will keep your resume on file for future opportunities and may contact you for further discussion.

Jor-Mac is currently hiring Welders on 1st Shift. 1st Shift is Monday through Thursday 5:00am to 2:00pm, Friday 5:00am to 9:00am. Apply fast, check the full description by scrolling below to find out the full requirements for this role. As a Welder, your job responsibilities will include: * Weld components with welding equipment as specified by layouts, engineering drawings, work orders, or verbal instructions. * Sets-up, lays out work using jigs/fixtures or hand layouts to fabricated parts and/or rework finished products. * Read, understand, and follow blueprints, job order specifications, engineering drawings. * Determine and use the correct weld fixture if available. * Complete and maintain all necessary and associated paperwork. * Maintains safe and clean working environment by complying with procedures, rules, and regulations. * Adhere to all Jor-Mac and OSHA safety related work rules and procedures. * Other duties as assigned or required. To be considered for a Welder position with Jor-Mac, you must have the following qualifications: * HS Diploma or GED. * Previous welding experience preferred. * Understanding of blueprints and weld symbols. * Ability to understand work orders, work instructions, and quality tolerances. *PHYSICAL REQUIREMENTS:* While performing the duties of this job, the employee is regularly required to use hands to finger, handle or feel; occasionally required to sit and talk; frequently required to hear, walk and continuously stand and reach with hands and arms. The employee will frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this position include close vision and the ability to adjust focus. Continuously exposed to manufacturing noise. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an all-encompassing list of responsibilities, duties and skills required of personnel so classified. xevrcyc Reasonable accommodations to essential functions of the job will be made if necessary.' ' Work Remotely * No Job Type: Full-time Pay: $22.00 - $24.00 per hour Benefits: * 401(k) * 401(k) matching * Dental insurance * Employee assistance program * Health insurance * Health savings account * Life insurance * Paid time off * Referral program * Retirement plan * Vision insurance Experience: * MIG welding: 1 year (Required) * Blueprint reading: 1 year (Required) Ability to Commute: * Lomira, WI 53048 (Required) Work Location: In person

Reports To: Rig Operator; Tool Pusher Direct Reports: No Job Family: Operations FLSA Code: Non-Exempt The Floor Hand I is responsible for performing tasks associated with the operations of a well servicing rig. The Floor Hand I works under the direct supervision of the Rig Operator and Tool Pusher to carry out all assigned job duties. ESSENTIAL DUTIES AND RESPONSIBILITIES • Understand RES concept of Stop Work Accountability • Ability to learn RES safety policies and procedures • Participate in Meet and Greet at location sites • Participate in JSA/DWP and tail gate meetings as scheduled • Basic understanding and ability to operate rig equipment - slips, tongs, and elevators • Basic understanding of mud pump and fluid handling operations • Understand the role of a floor hand during loss of well control events • Pull and run rods and tubing • Understand basic secondary lift mechanisms such as rod and electric submersible pumps • Assist in pipe tallying, rigging up and down and nippling up and down BOP units • Responsible for keeping work site, equipment, and tools clean and in good working order • Assist in the day-to-day lubrication and minor adjustments of equipment • Basic ability to identify hazards and perform Behavior Based Safety Observations • Understand and assist in energy isolation procedures • Ability to learn new skills as directed by Rig Operator and mentors • Responsible to stop work if conditions are unsafe and report concerns immediately • Report all incidents immediately • Other duties as assigned REQUIRED EDUCATION, QUALIFICATIONS AND EXPERIENCE • 6 months of experience working on a well servicing rig preferred • Must be familiar with pump and tank operations • Must have a valid state issued driver's license, CDL, or the ability to obtain one • Ability to perform manual labor required to operate well servicing equipment • Competent communication skills • Must be able to multi-task in a fast-paced environment • Ability to work a flexible schedule COMPUTER • Basic knowledge of MS Office preferred PRE-EMPLOYMENT REQUIREMENTS • Must complete and pass all required pre-employment screenings ABOUT THE COMPANY Ranger Energy Services is an oil & gas completion and production solutions company with a foundation built on well servicing, wireline, and natural gas processing. Ranger Energy is committed to providing employees with a benefits program that is both comprehensive and competitive. The programs are designed to invest in you and the things you care about - your health, your family, and your future. Come join our team of highly skilled, motivated employees, working on state-of-the-art equipment with outstanding compensation and additional benefits, including: Medical/Dental/Vision Flexible Spending Account/Health Savings Account Life Insurance Short- and Long-Term Disability Insurance Employee Assistance Program 401(k) Retirement Plan with Employer Match PTO (depending on eligibility) Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Dutchland, LLC designs, manufactures and constructs precast, post-tensioned concrete tanks for water, wastewater and renewable energy applications. Our team is growing and we're seeking a structural engineer (all experience levels, Spring 2026 grads welcome to apply). This is a great opportunity to make a difference in the water and wastewater industry. Position Responsibilities: Perform structural analysis and design of precast, post-tensioned concrete tanks in compliance with appropriate design codes and Dutchland standard practices Oversee the preparation of Erection and Production drawings for precast, post-tensioned concrete tanks Coordinate with the Project Management, Production and Construction departments to produce and install tanks within established budgets and schedules Contribute to efforts within the Engineering Department to continuously improve quality and efficiency of structural designs Contribute to efforts in the Engineering and Drafting Department to continuously improve efficiency of workflow Travel to job sites to inspect the work, as needed Perform stripping and handling calculations for precast concrete panels Interpret Contract Documents for environmental engineering tank projects Diligently work to obtain proficiency in analysis and design of all types of tanks produced by Dutchland Qualifications: B.S. in Civil Engineering, or equivalent Engineer-in-Training certificate PE license is a plus, but not required Reinforced concrete design Prior precast concrete and/or concrete tank design experience is desirable, but not required Foundation design Experience with 3D CAD modeling software desired, but not a requirement Technical writing Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people in the classification and are not intended to be construed as an exhaustive list of all job responsibilities, duties, and skills required of personnel so classified.

Berkot's Super Foods is seeking an Entry Level Grocery Buyer. This candidate will support the purchasing and procurement functions for assigned product categories within Berkot's grocery department, while also learning more about the grocery buying industry along the way. This role assists in maintaining optimal inventory levels, ensuring product availability, monitoring vendor performance, and upholding quality and pricing standards. The Grocery Buyer works closely with our Senior Grocery Buyer, store operations, marketing/pricing teams, and suppliers to ensure a consistent and profitable product assortment that aligns with company objectives Responsibilities Assist in sourcing, selecting, and purchasing grocery products under the guidance of senior purchasing staff. Monitor inventory levels across stores and distribution centers to help maintain appropriate stock and minimize out-of-stocks or overstocks. Review sales reports, forecasts, and market trends to support purchasing decisions. Collaborate with vendors to obtain product information, pricing, lead times, and promotional opportunities. Enter and maintain accurate purchase orders, product data, pricing updates, and item setup documentation in company systems. Support the execution of promotional programs, seasonal buys, and assortment changes. Communicate with store teams regarding product availability, delivery issues, or substitutions. Monitor product quality and address any issues or discrepancies with vendors as needed. Qualifications Associate or bachelor's degree in Business, Merchandising, or related field required. 0-2 years of marketing experience, preferably in retail, grocery, food service, or consumer goods is highly preferred. Strong organizational skills with the ability to manage multiple tasks and deadlines. Basic understanding of supply chain, merchandising, and retail operations. Proficiency in Microsoft Excel and other office software. Familiarity with inventory or ERP systems is a plus. Strong communication and interpersonal skills for effective vendor and internal team interactions. Detail-oriented with a focus on accuracy and data integrity. Job Type: Full-time Work Location: In person Benefits: 401(k) matching Dental insurance Vision insurance Health insurance Life insurance Paid time off

B & W, Inc. is a leading commercial HVAC company that has been recognized as one of the area's top companies to work for. Take the next step in your career now, scroll down to read the full role description and make your application. We are currently seeking 1 individual with at least 5 years experienced HVAC commercial installations experience to join our team in Harrisburg, PA. We are one of the preferred vendors for state and federal jobs. We are looking for a lead technician who can independently lead a team of installers. We also are looking for an installer who has experience working on commercial hvac and plumbing projects. *Skills* * Proven experience as HVAC Installer * Excellent knowledge of commercial HVAC systems (IAPA, R-134a, R-12, ARP, etc.) * Ability to handle equipment and tools with a high degree of safety. * Excellent communication and interpersonal skills * High school diploma or equivalent * Valid driver's license and background check for working on government. * EPA Certification is a required or master plumber license Responsibilities: * Install and service commercial air conditioning and heating systems. * Perform preventative maintenance on commercial air conditioning and heating systems. * Complete warranty work. Benefits: * Semi-Monthly pay using either direct deposit or credit card debits. xevrcyc Benefits include vacation pay, sick pay, medical insurance, dental insurance, disability insurance, life insurance & 401k. We provide truck which installer takes home and dispatches from home and can supply tools as needed. Job Type: Full-time Pay: $25.00 - $55.00 per hour Expected hours: 40 per week Benefits: * 401(k) * Company truck * Dental insurance * Fuel card * Health insurance * Life insurance * Paid time off * Retirement plan Experience: * hvac/plumbing: 5 years (Required) License/Certification: * Driver's License (Required) * EPA Certification (Required) Work Location: On the road

As a first mate, you will, under the supervision of the captain, be accountable for the safe operation of the vessel, including, but not limited to, navigational responsibilities, operation of various ship systems, and directing the various crew leaders of the vessel. As the second in command, you will be responsible, alongside the captain, for the safety and security of the vessel, crew, and equipment. ROLE AND RESPONSIBILITIES Responsible for assisting the captain in the safety of the crew members. Assisting the captain in voyage plans, navigation, and operation of the vessel. Assisting the captain with vessel inspections and certifications. Supervising and coordinating activities of the various crews on the vessel delegating daily tasks to ensure operational success. Performing regular maintenance and safety checks on the vessel's equipment and systems. Operating the vessel and maintaining stability during operations. Steering and operating vessel, using e-charts, radios, depth finders, radars, lights, buoys, or lighthouses. Keeping accurate logs while on duty as well as Daily Project Reports (DPR) Preparing vessel documents, port call documents, provision orders, purchase orders, etc. Maintaining vessel inventory and updates for bridge equipment. Maintaining accurate crew schedules following IMO Crew Rest Hours. Inspect vessel to ensure efficient and safe operation of equipment and conformance to Coast Guard inspection regulations. Preparation, management, facilitation, and completion of safety meetings, safety drills, Job Safety Analysis and/or Hazard Analysis. Follows company and work site safety policies/procedures and commits to an "incident and injury free" work environment. Performs other related duties as assigned. QUALIFICATIONS AND EDUCATIONAL REQUIREMENTS Credentials must list mate, pilot, or master with indication for mate of towing vessels. Credentials must have at least a 300 gross tonnage endorsement. Credentials must have proper route endorsement for inland or nearshore routes. Western Rivers or Great Lakes only endorsements are NOT sufficient. Must be able to multitask safely and efficiently. Must have good communications skills with both crew and office. Must have the ability to travel and stay aboard vessel for 21 day hitch. Credentials must have proper route endorsement for inland or nearshore routes. Western Rivers or Great Lakes only endorsements are NOT sufficient. Must be able to multitask safely and efficiently. Must have good communications skills with both crew and office. Must have the ability to travel and stay aboard vessel for 21 day hitch. PHYSICAL/MENTAL REQUIREMENTS The employee must perform the job's essential functions with or without reasonable workplace accommodation. The individual must also be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. This includes hard hat, safety glasses, life vest, respirators, ear plugs, steel toed shoes, personal flotation devices (PFD's), or other protective equipment as required by the work performed and location the work is being done. In addition, the employee must also be capable of: Walking, stepping, climbing, or otherwise moving from one location on the job site to another, which may be of varying heights and access parameters. Standing, stooping, twisting, bending, crouching, kneeling, squatting, climbing, or sitting repetitively and/or for long periods of time. Repetitive movements by feet, shoulders, arms, wrists, hands and back in performance of work. Must be able to lift and carry 30lbs individually. Anything greater than 30lbs and up to 60lbs will require additional lifting means. Must be able to push and pull at peak force of 150lbs. Climbing stairs and/or vertical ladders of a height of 6ft or greater. Working in confined work areas and/or elevated heights. Adapting to temperature changes, outdoor conditions, and prolonged exposure to dusty, wet, or humid conditions, loud noises, and vibration. The Company expects and requires all employees to observe and fulfill all safety responsibilities as outlined in workplace safety training, and actively work toward maintaining a safe workplace. Failure to do so can result in disciplinary action, up to and including termination of employment. Regular attendance and punctuality are required of all employees. Callan Marine, Ltd. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of and will not be discriminated against based on gender, sexual orientation, gender identity, race, color, ethnicity, national origin, religion, age, veteran status, disability status, genetic information, or any other protected category. Callan Marine, Ltd. reserves the right to revise or change job duties and responsibilities as the need arises. This job description does not constitute a written or implied contract of employment. Employment at Callan Marine, Ltd. is on an "at-will" basis. Employment security cannot be guaranteed for or by any employee.

Leadman - Provides leadership, instruction, and guidance to other craft workers in work crew, providing assistance to Foreman, while working in the capacity of a journeyman. Lays out, fabricates, assembles, installs and maintains piping systems, pipe supports, fixtures, and related hydraulic and pneumatic equipment for steam, hot water fixtures and equipment for steam, hot water, heating, cooling, lubricating, sprinkling and production and processing systems. RESPONSIBILITIES Selects type and size of pipe and related materials and equipment, such as supports, hangers, and hydraulic cylinders, according to job specifications. Inspects worksite to determine presence of obstructions. Plans sequence on installation to avoid obstructions and activities of other workers. Cuts pipe using hacksaw, pipe cutter, hammer and chisel, cutting torch and pipe cutting machine. Threads pipe using threading machine. Bends pipe by hand or with pipe-bending tools and machine. Mounts pipe hangers and brackets on walls and ceiling to hold pipe. Assembles and installs a variety of metal or nonmetal pipes and pipe fittings, using threaded caulked, soldering, brazen, fused, or cemented joints, and hand tools. Secures pipes to structure with bracket, clamps, and hangers, using hand and power tools. Installs and maintains refrigeration and air conditioning systems, including compressors, pumps, meter, pneumatic and hydraulic controls and piping, Test piping systems for leaks by increasing pressure in pipes and observing gauges attached to pipes for indication of leaks. Welds pipe supports to structural steel members. May observe production machines in assigned area of manufacturing facility to detect machinery malfunctions. May operate machinery to verify repair. Loads, transports and unloads material, tools, equipment and supplies. May assist in lifting, positioning and securing of material and work pieces during installation. Performs minor maintenance of cleaning activities of tools and equipment. Respiratory protection is common and may be required. Responsible for observing and complying with all safety and project rules. Perform other duties as required.JOB REQUIREMENTS Work within precise limits or standards of accuracy. Make decisions based on measurable criteria. Apply shop mathematics to solve problems Plan work and select proper tools. Visualize objects in three dimensions from plans and drawings. Work at heights without fear. Compare and see differences in the size, shape and form of lines, figures and objects. QUALIFICATIONS May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. PHYSICAL REQUIREMENTS 1. Strength: a. Standing 60% Walking 20% Sitting 20% b. Lifting 50 lb. Carrying 50 lb. Pushing 70 ft-lb. Pulling 70 ft-lb. 2. Climbing F Balancing F 3. Stooping O Kneeling O Crouching O Crawling O Reaching C Handling C Fingering F EXPLANATION OF SYMBOLS NP Not Present O Occasionally (0-33%) F Frequently (34-66%) C Constantly (67-100%) Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development.

The Principal Fire Protection and Wildfire Compliance Engineer is a highly specialized senior-level technical expert responsible for managing fire and life safety across the utility's infrastructure, with a specific focus on complex technical occupancies, hazardous environments, and comprehensive regulatory compliance. This role combines advanced fire protection engineering with a hands-on tactical understanding of emergency operations and a deep knowledge of specialized fire codes. The engineer will provide authoritative oversight of fire protection plan review and field inspections, integrating technical requirements into the utility's broader wildfire and property loss control strategies. Key Responsibilities Regulatory Plan Review and Enforcement Lead the fire protection plan review process for all utility facilities and construction projects, including those with special technical occupancies (e.g., generation plants, advanced control centers) and hazardous environments (e.g., fuel storage, chemical treatment facilities). Serve as the primary liaison with fire marshals, regulatory bodies, and other authorities having jurisdiction (AHJ) during plan reviews, inspections, and enforcement actions. Develop and maintain a robust system for tracking regulatory compliance, corrective actions, and documentation across all fire protection activities. Hazardous Environment and Special Occupancy Loss Control Conduct advanced risk assessments and loss control evaluations for special technical occupancies and areas with hazardous materials, identifying potential fire ignition sources, propagation risks, and mitigation measures. Specify and review the design of specialized fire suppression systems, detection systems, and fire-resistant construction for these high-risk areas, ensuring compliance with relevant NFPA standards (e.g., NFPA 30, NFPA 850) and OSHA requirements. Evaluate potential environmental impacts and associated regulatory reporting requirements related to fire and hazardous materials incidents. Utility and Wildfire Fire Operations Provide expert guidance and operational readiness evaluation, drawing on fire operations experience to inform the utility's wildfire response plans and procedures. Collaborate with internal and external fire agencies on pre-incident planning, tactical response strategies, and incident command system integration. Conduct post-incident analysis for fires impacting special occupancies or hazardous environments, using findings to drive improvements in engineering, procedures, and training. Program Evaluation and Risk Modeling Assess the effectiveness of the utility's Fire Prevention Plan (FPP) and Wildfire Mitigation Plan (WMP), particularly as they apply to hazardous environments and special occupancies. Manage and evaluate the use of wildfire risk modeling software and operational tools, incorporating specialized data related to hazardous materials and facility vulnerability. Cross-Functional and Executive Reporting Act as a technical subject matter expert for executive leadership and legal counsel, providing clear and concise report on fire protection compliance, loss control, and risk exposure. Lead cross-functional teams involving engineering, operations, safety, and environmental departments to ensure seamless integration of fire and life safety requirements. Qualifications Experience 10+ years of progressive experience in fire protection engineering, including extensive experience with regulatory plan review, field inspections, and loss control. Proven experience conducting fire and hazardous materials risk assessments in industrial or utility settings, particularly involving special technical occupancies and high-hazard environments. Demonstrated experience in fire operations, with a deep understanding of incident command, emergency response, and firefighting tactics. Expert-level knowledge of NFPA codes and standards applicable to utilities and hazardous environments (e.g., NFPA 30, 70, 850, 101). Education and Certification Bachelor's degree in Fire Protection Engineering, Electrical Engineering, or a related field. Master's degree preferred. Professional Engineer (PE) license is required. Certified Fire Protection Specialist (CFPS) is highly desirable. Skills Expert knowledge of fire science, hazardous materials behavior, electrical systems, and relevant regulatory codes (e.g., NFPA, OSHA, EPA). Advanced proficiency in plan review processes, inspection protocols, and fire investigation techniques. Exceptional written and verbal communication skills, with the ability to convey complex technical and regulatory information to diverse audiences, from field crews to executive leaders. Ability to balance technical requirements, regulatory mandates, and operational realities in a high-risk environment. Working Conditions Regular travel for inspections approximately 25% of the time. The role involves a mix of office-based work and significant fieldwork in diverse and potentially hazardous environments. The position demands flexibility and may require irregular hours during fire events, emergencies, and regulatory deadlines. #J-18808-Ljbffr

A nonprofit organization located in Oak Brook is seeking an Assistant Executive Director for Finance and Administration. This role will act as the Chief Financial Officer, overseeing financial operations, budgeting, HR strategy, and compliance. The ideal candidate will have over 12 years of financial leadership experience, ideally within nonprofits, and possess a strong background in financial management and risk assessment. The position offers a competitive compensation package along with a hybrid working environment. #J-18808-Ljbffr

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs mid to expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. · Independently performs maintenance as per industry standards. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Complies with 5S and housekeeping standards. · Drives and participates in CI activities - processes, results and cost savings. · Updates records and reviews CMMS history. · Troubleshoots and analyzes control systems to resolve software/ hardware and configuration problems. · Utilizes predictive maintenance technologies to collect equipment performance data. · Provides assistance to lower level technicians and leadership to small teams. Performs more advanced functions as a part of training and development. · Completes on-the-job and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry or successful completion of the ATS Technician Progression Program. · Understands electrical, mechanical, fluid power and control systems. Can analyze problems and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate · May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range$31.70-$40.55 USD ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

About Hawkins Hawkins, Inc. is a formulator, manufacturer, blender, distributer, and sales agent for thousands of industrial chemicals and reagent grade laboratory chemicals sold to municipalities and businesses throughout the Central United States. Thousands across a variety of industries have depended on Hawkins for the chemical products they need since 1938. Learn more about us at https://www.hawkinsinc.com/careers/ ABOUT THE JOB: Operations / Engineering Interns are considered to be an integral part of the Operations Team and are provided with tasks that are both technically challenging, educationally stimulating, and beneficial for our organization. Under guidance of the Engineering and Operations Leadership Team, the program participant may be assigned to a team and/or work independently on specific projects, engineering drawings and documentation, calculations, tools, programs, and processes. DUTIES AND RESPONSIBILITIES: The list below describes a range of job accountabilities for our engineering interns. Specific assignments will be determined based on business needs at the time of assignment. Learn operational processes and procedures while assisting team in identifying process improvements Assist with and/or or directly manage, scope, schedule, and budget for certain capital projects Create and update drawings using programs such as AutoCAD and Microsoft Visio Create flow charts and spreadsheets in support of projects and operations Update and maintain engineering tools such as cost estimating worksheets, or dilution calculators Update and maintain databases such as preferred contractor lists, tank and equipment lists Conduct operational and engineering analysis such as time studies, capacities, cost/benefit analysis. Help specify process equipment and provide documentation for project files Help analyze and evaluate manufacturing methods and standards. Help provide solutions to problems that adversely affect operator safety, quality, productivity, and cost Work with cross-functional teams including Operations, Quality, Technical, Engineering, and Supply Chain. Assist in development and documentation for PSM/RMP covered processes including MOCs and PSSRs. Assist in development and rollout of Maintenance Management System / Preventative Maintenance. Assist in development and troubleshooting of controls systems including Allen Bradley and Ignition Assist Lean manufacturing / Six Sigma training and continuous improvement implementation ABOUT YOU: Completed two years in engineering, manufacturing, or chemistry related degree Excellent written and verbal communication skills Must be detail oriented and possess excellent follow up skills Working knowledge of computer application software (MS Office, JDE, etc) Training will be provided as needed Must be flexible and able to work overtime when required Must be organized and work well with constant priority changes Must be able to work independently with minimal supervision Ability to effectively work with employees at all levels within the organization and external customers, suppliers and vendors Physical work environment is typically indoors at a consistent temperature and occasionally outdoors with exposure to varying degrees of hot and cold environments. Must be authorized to work in the United States. Ability to travel between Hawkins facilities, typically within the Twin Cities metro PHYSICAL REQUIREMENTS Ability to sit, stand, bend, stoop, reach, ascend or descend stairs, and walk for extended periods of time in an office or manufacturing setting or outdoors, including areas where conditions may include odors, varying temperatures, humidity, and moderate levels of noise. Ability to wear personal protective equipment (PPE) as required by the facility and or job The employee must frequently lift and/or move up to 50 pounds. Ability to safety use power hoist, pallet transport trucks, powered forklifts, and banding machines and or company vehicles. Close vision and hand eye coordination required to efficiently and safely perform job. Expected Compensation: $20.00-23.00/hour. Hawkins offers eligible employees and their dependents comprehensive benefits, which includes medical, dental, vision, life insurance, LTD/STD and more. Other benefits for eligible employees include 401(k) match, Employee Stock Purchase program (ESPP), paid time off, and paid holidays. For more information on Hawkins benefits, visit: https://www.hawkinsinc.com/careers/benefits/ Ref. 2026-203 All applications must be received online. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristics protected by law. Hawkins is a Drug Free workplace.