Shipping clerk jobs in Victoria, TX - 4,434 jobs

Our DC/Warehouse Associates are a vital part of our warehouse and assist in, but not limited to; pick pack and stage parts, utilize hand-held radio frequency devise (RF scanners), and move boxes throughout the distribution center. Responsibilities Marks pallets with identifying store information. Uses the computer / RF to enter records. Uses equipment (pallet jack, forklift, etc.) Uses voice picking system Keeps work area neat, clean and hazard free. Will be required to use a hand held radio frequency device (R.F. Unit) Consistent, reliable attendance Other related duties as assigned. Requirements Must be at least 18 years of age High School diploma or general education degree (GED)/Home School equivalency Eligible to work in the United States Ability to work on various shifts, overtime, weekends, and holidays as needed Read and interpret documents such as safety rules, instructions, and procedure manuals Basic math strategies: add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals Preferred Skills * Prior warehouse training or experience is preferred but not required Physical Requirements The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the team member will be required to: Stand, walk, use hands and fingers, reach with arms, talk and hear Frequently required to stop, kneel and crouch Occasionally required to sit, climb, or balance must regularly lift and/or move up to 25 pounds, and frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 100 pounds Have specific vision abilities which include close vision, distance vision, and ability to adjust focus California Residents click below for Privacy Notice: ***************************************************

About the Organization Allen Corporation of America, Inc. is a professional services company offering industry-leading information technology, logistics, and training solutions to the private and public sectors. Founded by A. Carl von Sternberg, Allen is a small business with headquarters in Fairfax, Virginia and offices throughout the United States. Allen's rapid growth has been fueled organically and through key acquisitions. Allen has been recognized both regionally and nationally with awards from Washington Technology and Inc. magazines, Washington Business Journal, and Deloitte and Touche. Allen's attention to detail and superior contract performance have earned it a reputation as a leader in the fields of logistical operations, information technology security, training, network engineering. Allen's team of experienced project managers, architects, IT specialists, security experts,and trainers are vendor and industry certified. These subject matter experts design and deliver innovative and cost-effective solutions which address the business needs of our clients. EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, disability status, protected veteran status or any other characteristic protected by law. Religious discrimination includes failing to reasonably accommodate an employee's religious practices where the accommodation does not impose undue hardship. Allen Corporation of America uses E-Verify in its hiring practices to achieve a lawful workforce. Internal Requisition Number 02-2020-005 Full-Time/Part-Time Full-Time Pay Rate $17.75 / hour Shift Days Location Ft. Cavazos, TX Position Transportation Clerk Description SUMMARY: Responsible for the daily requirements of the Joint Personal Property Shipping Office effort, arranging for shipment and/or storage of personal property. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Performs any combination of following and similar clerical duties requiring limited knowledge of systems or procedures: Route and book shipments for movement. Prepare shipping documents. Brief customers on regulations and procedures for shipment/storage. Within general guidelines, select and apply appropriate travel guides, methods, techniques, and work sequences to effectively accomplish the work. The majority of assignments are performed without technical assistance, but unusually difficult travel situations or problem cases encountered during the course of the work are referred to the supervisor before decision or commitment. Participate in meetings. Writes, types, or enters information into computer, to prepare correspondence, briefing, statements, receipts, spreadsheets, or other documents, copying information from one record to another using Microsoft Office Suite software (Word, Excel, PowerPoint, Teams). Answer phone calls and emails. Other duties as assigned. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Able to sit and work at a computer keyboard for extended periods of time. Able to stoop, kneel, bend at the waist and reach. Able to lift up to 25 pounds occasionally. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Typical office environment. The noise level in the work environment is usually moderate. Alternate work locations or teleworking may be authorized during certain circumstances. Position Requirements QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must have a successful NAC-1 and obtain a Common Access Card (CAC). EDUCATION and/or EXPERIENCE: HS diploma or equivalent with 1 years experience in an office environment in the field or in a related area. OTHER SKILLS AND ABILITIES: Must have solid oral and written communication skills. Able to make decisions based on standing operating procedures (SOPs). Ability to work with minimal supervision. Beneficial but not necessary: Experience/knowledgeable using the electronic Transportation Operational Personal Property Standard System (eTOPS) or Defense Personal Property System (DPS) and applicable forms. Knowledgeable in advising customers of exceptions to policies (ETP) in accordance with the JTR policies. Experienced in consigning shipments in accordance with SDDC Personal Property Consignment Instruction Guides (PPCIG) - Domestic and International. Experienced in arranging for movement of boats, components, and accessories of boats as part of an entitled customer's personal property in accordance with JTR and DoD 4500.9-R. Knowledgeable/familiar with exceptions to policies (ETP) procedures in accordance with the JTR, Consign shipments in accordance with SDDC Personal Property Consignment Instruction Guides (PPCIG) - Domestic and International. Special Instructions This position is currently accepting applications.

CSI is looking for a Shipping Coordinator for our Grand Prairie TX location. This position will provide day-to-day operational support of shipping functions, across departments, within CSI. This employee must have a general understanding of all aspects of logistics including Importing, Exporting, Warehousing, Multimodal Transportation and General Inventory Control processes. The Shipping Coordinator will sit in the warehouse environment as part of the warehouse team, specializing in shipment scheduling, both export and domestic. CSI employees are engaged daily in the company's culture, committed to our core values and have a passion for excellence in order to successfully drive and support the company's goals, vision and mission. Our motto is "To Take Care of Each Other and Take Care of Customers". Salary: $22 - $25 per hour Primary Functions Logistics Work with purchasing, customer service, sales, warehouse and project management to coordinate international logistics services (including importing and exporting) Create and foster relationships with carriers, freight forwarders, and 3PLs Provide support for all warehouse operations; including shipping, receiving, inventory control, general administrative duties and housekeeping Coordinate international shipments for customers International documentation File all documents in document management system Schedule and order crates Track shipments Pull MTR's for customers Communicate with vendors to purchase and expedite drop ship and other pertinent items Position Requirements: Education/Training: High school diploma or equivalent, required College degree or some college courses, desired Experience: Good phone etiquette, required Computer proficiency with Microsoft Office, required Previous customer service experience, preferred Previous purchasing experience, helpful Industrial food or pharmaceutical, helpful Epicor ERP 10 experience, preferred More than 40 hours per week may occasionally be required in order to achieve the productivity necessary for this position. Overnight travel, Saturday, Sunday and holiday hours may occasionally be required but are not anticipated with this position. This position requires the ability to interact with employees verbally and in writing, remain in a stationary position for 80% of the workday, have close visual acuity, and constantly operate a computer and other office productivity equipment, such as a phone, copy/fax/scan machine, computer keyboard and mouse with or without reasonable accommodation. This position also requires the ability to occasionally lift, stoop, bend, and lift office products and supplies, up to 20 pounds. CSI has a long-standing policy of Equal Opportunity in employment. Our practice is to fill positions by selecting applicants who can perform the work in a competent and professional manner. We do not discriminate on the basis of age, sex, race, color, religion, national origin, sexual orientation, gender identity, protected veteran status, or individuals with disability. U.S. federal law requires completion of employment eligibility verification upon hire. CSI participates in E-Verify. Must have the right to work in the United States.

Earn Extra Cash While Working From Home Make extra cash with this list of side gigs-part-time, passive income, and flexible options! Your Next Side Hustle Start Earning Today!

Who we are looking for: The Transportation Clerk facilitates and manages the transportation of buyer and seller vehicles to and from auction sites and other areas as assigned. This role will coordinate vehicle transportation, manage documentation, and support the overall logistics operations. The Transportation Clerk will work closely with drivers, staff, and external transport vendors to ensure the timely and accurate delivery of vehicles. What you will do: Actively and consistently support all efforts to simplify and enhance the customer experience. Coordinate the transportation of vehicles from and to the auto auction lot, ensuring efficient and timely movement. Maintain accurate records of vehicle movements, including check-in, check-out, and transfer details. Communicate with drivers, auction staff, and transport vendors to schedule and confirm vehicle pick-ups and deliveries. Prepare vehicle documentation, such as titles, registration forms, and condition reports. Inspect vehicles upon arrival to verify accuracy and completeness of information. Verify and update vehicle information in associated databases or systems. Ensure compliance with regulatory requirements and company policies related to vehicle transportation. Resolve transportation-related issues and address any discrepancies or delays promptly. Assist in coordinating logistics for special events or auctions. Provide administrative support to the transportation department, including data entry, filing, and record keeping. Perform auction-related administrative functions, including reception, payment collection, customer service, and inbound phone calls. Collaborate with other departments, such as customer service and operations, to ensure smooth workflow and customer satisfaction. Perform additional duties as assigned. What you will need: Ability to read, write, speak and understand English. Proven experience in fleet management, lease administration, or a similar role. Demonstrated organizational and multitasking skills, with the ability to prioritize and meet deadlines. Attention to detail and accuracy in maintaining records and documentation. Computer software and applications experience, including CRMs, MS Office Suite (particularly Excel), and database management. Effective communication skills, both verbal and written, with the ability to interact professionally with clients, vendors, and internal stakeholders. Basic knowledge of automotive terminology and vehicle condition assessment. Familiarity with relevant regulations and compliance standards in fleet management or lease administration. Ability to work independently as well as collaboratively in a team environment. Must be able to work in traditional office conditions, including sitting for extended periods of time. Able to lift, push, pull, or move items weighing up to 25 lbs. for various needs, including maintaining traditional office equipment such as printers, fax machines, copiers, and computers.

Job title: HAC Warehouse Specialist Reports to: Warehouse Manager or Director of Inventory and Vendor Management A highly visible role managing all aspects of the shipping/receiving and stocking of machines/parts inventory - including but not limited to, overseeing all logistics (interacting with freight carriers), proper warehousing and accounting for said products, adherence to specific OSHA/EH&S requirements, and staging of service parts. Duties and responsibilities: Manage logistics for all incoming and outgoing freight. Inspection of all incoming products - visually inspecting equipment and boxes ensuring quality product is received (no visual damage incurred during shipment). If damaged freight is received, you must get approval from manager before refusing delivery. Ensure all parts and equipment items are kept with like parts and equipment and that bin locations are properly recorded in the inventory management system for ease of locating and inventory control. Consistency in location is a key result of these efforts. Conduct random inventory cycle counts as requested by management to verify accurate stock counts. Ensure shipping accuracy by confirming exact part numbers and/or model and serial numbers along with correct ordered amount against all order paperwork from sales and service. Discrepancies are to be immediately communicated to your manager. Coordinate pick-up and deliveries with 3rd party carriers. Receive stock deliveries, unpack, confirm receipt, and put away in correct location. Input and track inventory in ERP system and/or SAP. Arrange stock transfers in/out of other branches - coordinate and stage service parts for service technicians. Ensure compliance with all applicable EH&S and OSHA rules and laws, and company ISO quality standards. Label units and equipment by creating a large 8.5 x 11 identification sheet indicating the model and serial number and placing on the outside of unit/equipment ensuring its visibility from the floor. Units/equipment must be organized and stored in a central area for ease of retrieval and inventory counts. Keeps the warehouse clean, organized, and accessible. Perform other duties as assigned. Education: High School Diploma or equivalent (Related industry experience may be considered in lieu of education requirements) Associate degree or other post high school training (2 years duration) preferred not required. Professional experience: Air compressor experience a plus. Prior logistics, warehousing, and inventory management experience. Skilled forklift operations experience and certification is required. Moderate proficiency with Microsoft programs such as Outlook, Word, Excel preferred. SAP knowledge preferred. 1-2 years warehousing, inventory management and logistics experience. Key behaviors: Display the ability to manage time accordingly, with good organization skills and attention to detail. Must have the ability to work and solve problems independently, a motivated, self-starter. Ability to manage multiple priorities, remain calm under pressure and work well across all levels of the organization. Team player who will coordinate with other departments daily to accomplish tasks. Ability to communicate with internal and external customers (oral and written) in the English language. Contribute to positive Company branding by projecting a knowledgeable, professional, and customer-orientated image to customers. Open and flexible to changing priorities based on business needs. Strong research skills. Dedicated to completion of responsibilities, having a sense of urgency. Position Requirements: Must possess a valid driver's license and be insurable. This position is highly physical and requires regular use of hands, fingers, walking, stooping, and kneeling. It requires employees to regularly lift up to 50 lbs. and climb ladders/stairs. Must wear appropriate PPE, such as steel toed boots and safety glasses when necessary. Direct reports: N/A The successful candidate is responsible for complying with Hitachi's Code of Ethics and related policies. In performing the job, the incumbent shall take all steps necessary to comply with our safety rules and requirements and must actively support the organization's efforts to meet and exceed its goals of creating and maintaining a safe workplace. This description is to serve as a guide. It is intended to be flexible and will continue to evolve over time with business needs and demands and may be updated periodically and at the Company's discretion. Hitachi Global Air Power US, LLC is an equal opportunity employer and will not discriminate based on race, religion, color, age, gender, sexual orientation, national origin, genetic information, veteran status, physical or mental disability, or other protected categories under applicable law, whether in recruitment, employment, promotion, transfer, compensation, or other conditions of employment.

America's Auto Auction (AAA) is a full-service used-vehicle auction services provider that facilitates the wholesale remarketing of used vehicles for B2B customers, delivering a critical liquidity function to enable the used car sales ecosystem. AAA facilitates the selling and buying of used vehicles at physical auction sites across 20 states as well as on digital platforms. The Company's daily mission is simple and straightforward: to provide high quality service and operational execution for dealers and institutional customers. America's Group continues its strategic focus on expanding its national footprint and service offerings by acquiring high-quality independent auctions led by strong operating management. America's Auto Auction has grown to over 40 locations across 20 states. As we continue to grow, we remain committed to our employees and communities we serve. We are seeking to fill our open position of Transportation Clerk/Dispatcher. This role will create orders and verify vehicle assignments for financial institutions' in a timely manner so said vehicles can be processed and driver's can be dispatched to get them. RESPONSIBILITIES • Create Order and confirm location of assigned vehicles from various financial institutions. • Research variable delays regarding pickup assignments not ready to be verified. • Re-verify delays that occur after the vehicle has been dispatched, but not picked up. • Confer with banks as to location of vehicles and to answer any other questions they might have regarding transportation needs. • Cross check multiple transportation online resources to complete assigned tasks. • Assist when needed and available, other employees to expedite their tasks. • Perform other duties as assigned by management. Requirements Competencies/Skills • High School Diploma or equivalent required. • 1-3 years Auction experience or 2-4 years dealership experience strongly preferred but not necessary. • Effective communication (written and verbal) and interpersonal skills required. • Effective phone communication skills connecting to financial and privacy information. • Ability to work in a high performance, fast-paced team environment. • Solid computer skills, including ability to use Internet and MS Office effectively. • Knowledge of Logistic Flow Systems • Ability to adapt to and work effectively within a constantly changing environment. • Excellent customer service and problem solving skills required. • Creative Research Skills. • Proven Professional Email Skills with multiple high level clients • Customer Focus. • Data Entry Skills. • Telephone Skills. • Office Organization. • Product Knowledge Learning Skills. Physical Demands • Ability to sit or stand for prolonged periods of time. • Ability to perform repetitive tasks; manual dexterity • Vision abilities required include close, distance and depth perception

The HT Group is seeking Warehouse Associates for a client in Port Arthur. This is a temp-to-hire opportunity with a Monday-Friday schedule from 7:30am. to 4:30pm. Pay is $15 per hour. Candidates must be available to start immediately. Ship and receive materials Unload trucks and stock inventory Operate a forklift safely Match purchase orders with sales orders Sort and place materials in designated locations Label all materials accurately File requisitions, work orders, and material requests Maintain a clean, organized warehouse and work area Qualifications: Must have forklift experience Must be able to lift 20-50lbs Must be able to follow instructions, be reliable, dependable, and ready to work Must pass background - No: Felonies / Violence / Theft and pass a drug test Dress Requirements: Steel toe boots Pants and appropriate T-Shirt ** If you meet the above requirements / qualifications, please apply with your resume for immediate consideration. ** #SETX

Paraprofessional/Clerical Date Available: 25-26 School Year Assist campus special education ARD staff with maintaining audit records, clerical work, and preparation of materials. Qualifications: Education/Certification: Two years of study at an institution of higher education totaling 48 hours, or Associates Degree, or Passing score on the "Paraprofessional Assessment of Competencies" exam, to be administered by Alvin ISD Note: the above criteria must be met before your application can be considered for this Position Valid Texas Education Aide Certificate (obtainable through Alvin ISD when hired) Note: the applicant who is hired for this position must be prepared to pay fees totaling $79.00 for this certification and fingerprinting by the State Board Special Knowledge/Skills: Ability to use personal computer and software (EXCEL, WORD) Strong organizational, communication, and interpersonal skills Ability to meet established deadlines Knowledge of general office equipment Experience: One year clerical experience in a public school environment preferred Salary: Admin. Support PG2/198 days Starting: $21,414

Department - Registered Agents 6 month contract to hire Monday - Friday 8am-5pm Frisco, Texas 75034 Onsite Role About Our Company We are a leading provider of online legal and tax services, committed to making legal help accessible to all. For over 20 years, we've empowered millions of customers to start businesses, protect intellectual property, and secure their families' futures through innovative technology solutions. Our culture fosters diversity, inclusion, and a passion for democratizing the law to make a meaningful impact. Job Description We are seeking a detail-oriented and reliable Registered Agent to support our team on a contract basis. This role is critical in managing legal documentation and operational tasks to ensure compliance and streamlined communication. What You'll Be Responsible For Handling incoming and outgoing mail, including time-sensitive legal documents. Conducting and submitting monthly audits accurately and promptly. Assisting with shipping-related tasks to support site operations. Organizing and maintaining legal documentation in compliance with internal and regulatory standards. Communicating professionally with internal departments and external stakeholders as needed. Required Experience/Skills Proven punctuality and reliability. Strong attention to detail and organizational skills. Experience with mail handling and legal documentation (preferred). Ability to work onsite in Frisco, TX. Nice-to-Haves Prior experience in legal operations or administrative roles. Familiarity with compliance-related tasks and document control. Education High school diploma or equivalent required. Pay & Benefits Summary Pay range: $21/hr. Apply Now! Registered Agent | Mail Processing | Legal Operations | Administrative Support | Compliance | Legal Documentation | Monthly Audits | Frisco TX | Onsite Role

To perform general stock-related functions and support the business with general warehouse duties including but not limited to receiving, picking, packing, shipping orders and basic janitorial duties. Location: On-site at the warehouse, Monday to Friday, 8:00 AM - 5:00 PM, located at 1804 Owen Court, Suite 104, Mansfield, TX 76063. This is an in-office role, and the ideal candidate should be based in-state. Warehouse & Logistics Picking, packing, and shipping outbound orders. Keeping the warehouse and its contents clean and orderly. Ensure stock accuracy by paying attention to part numbers. Receiving inbound orders, inspecting for damage and accuracy in quantities. When a problem arises relating to either quantity or damage to goods upon arrival, work with management to resolve. Participating in the annual stock count. Monitoring and tracking of warehouse goods and consumables, work with management to order any new supplies. Janitorial Ensure that all internal and external building areas are always kept clean and tidy. This includes but is not limited to vacuuming, cleaning of bathrooms and common areas. Ensure all facilities, equipment and tools are in a working order. Ensure all facilities and equipment are kept clean and tidy and always stored correctly. Ensure office space is always kept clean and tidy. Cable Crimping Proficient in the process of cutting, testing, and crimping cables with different connectors. Understand the testing process and experience on how to operate an analyzer and multimeter. Perform a variety of tasks ranging from repetitive to non-repetitive specialist production assembly operations on electronic and mechanical assemblies and sub-assemblies such as cables, harnesses, and control panels. Production of wire harness and cable assemblies using hand and power tools (including specialized crimpers, drills, soldering tools, screwdrivers, torque wrenches, wire strippers, precision measuring instruments, etc.) Daily cable and harness techniques (wire cutting, stripping, crimping, pinning out, soldering, braiding, use of lacing tape to secure wire bundles, testing, etc.) Ability to read and understand the customer drawings, parts list, wire list, and instructions on how to manufacture the wire harness and cable assembly. Make continuity checks on work in process. Conduct in-process inspections on product in accordance with quality specifications. Work collaboratively with the Management team to correct and improve upon any documents related to the assembly process. Administration and Reporting General correspondence and administration completed accurately and timeously. Email, inbox, and data managed timeously and effectively. Professional image maintained in all communication. All reporting and feedback requirements met, and reports completed accurately and timeously, according to company requirements. Adhere to departmental processes and standard operating procedures. Supply statistics and information as requested. Values and Conduct The Poynting brand: we value the promotion of the brand by maximizing exposure of brand symbols and colors on products in marketing. We ensure our behavior and products embody the brand with the promises outlined here. Innovation, use of MVPs and agile development methodologies are core values to create user-relevant products. We value similar methodologies to streamline internal functions and to galvanise and empower sales partners and provide creative marketing support. Fearless Initiative and Risk-Taking: We cherish bold and assertive employees and teams who dare to take initiative and embrace calculated risks. We celebrate failures as steppingstones to progress and forgive mistakes that result from genuine efforts to advance our business. Teamwork and Synergy: Vulnerability, honesty, mutual trust, and integrity are nurtured and demanded as these are key drivers of team excellence. Diversity and Inclusion: We embrace diversity and strive to provide equal opportunities to all, recognizing the substantial commercial and internal benefits it unlocks. We actively eliminate biases that hinder company diversity. Global citizens: We value and take care of our environment, employees, and other stakeholders, and want to enrich societies around us. We welcome and immerse ourselves in different world cultures since this is key to achieving our Vision. Qualifications & Experience High school degree or equivalent (previous experience will be considered) Ability to read and comprehend procedures written in English. Displayed comprehension of assembly practices and technologies. Familiarity with assembly tools, processes, and terminology. Ability to distinguish colors is required. Technical knowledge of electronics and mechanical designs; must be able to read and understand customer drawings and or schematics. Understanding of the application and functioning of test equipment. Good verbal and written communication skills. Individual must be able to work at the pace necessary to meet customer demands with minimal supervision. Self-motivated team player. IPC Solder and Rework Certified a plus. Lift up to 60 pounds. RF experience would be advantageous. Benefits : 20 vacation days per year, 10 sick days per year and 10 paid holidays. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Primary Purpose: The Copy Clerk is responsible for providing high-quality document reproduction services to support the daily operations of the Campus. This position involves operating photocopiers, scanners, and related office equipment to duplicate and distribute printed materials accurately and efficiently. The Copy Clerk ensures that all copying tasks are completed in a timely manner while maintaining confidentiality and attention to detail. Additional responsibilities may include managing supply inventories, performing basic equipment maintenance, and assisting with other clerical and administrative duties as needed. Qualifications: Education/Certification: High school diploma or equivalent Special Knowledge/Skills: Basic familiarity with office equipment (copiers, printers, scanners) Attention to detail and good organizational skills Ability to manage time efficiently and handle repetitive tasks Good communication and teamwork abilities Major Responsibilities and Duties: Operate photocopy and printing machines to duplicate documents Sort, label, and distribute copied materials to the appropriate departments or individuals Perform basic maintenance and troubleshooting on copying equipment Maintain records of copying jobs, supplies used, and completed tasks Ensure confidentiality of sensitive or proprietary information Assist with filing, scanning, and other clerical duties as needed Any and all other duties assigned by immediate supervisor. Supervisory Responsibilities: Mental Demands/Physical Demands/Environmental Factors: Tools/Equipment Used: Standard large and small kitchen equipment and tools including electric slicer, mixer, pressure steamer, deep-fat fryer, sharp cutting tools, stove, oven, dishwasher, and food/utility cart Posture: Prolonged standing; frequent kneeling/squatting, bending/stoop, pushing/pulling, and twisting Motion: Continual walking; frequent climbing (ladder), grasping/squeezing, wrist flexion/extension, reaching/overhead reaching Lifting: Frequent moderate lifting and carrying (15-44 pounds) Environment: Work inside in commercial kitchen environment; exposure to extreme hot and cold temperatures, extreme humidity, noise, vibration, microwaves, biological hazards (bacteria, mold, fungi), chemical hazards (fumes, vapors, gases), electrical hazards; work with hands in water; work around machinery with moving parts; work on slippery surfaces Mental Demands: Work with frequent interruptions; maintain emotional control under stress

Bilingual Inventory Controls Specialist The Bilingual Inventory Control Specialist manages inventory accuracy and warehouse operations in compliance with company policies. This role oversees inventory movements, cycle counts, picking, packaging, warehousing, distribution, and maintenance of warehouse facilities and equipment. The position ensures safe work practices, efficient space utilization, and operational excellence while minimizing inventory discrepancies and supporting seamless logistics operations. Key Responsibilities: Inventory Control & Accuracy Ensure all products are properly accounted for and inventory levels are maintained with the highest degree of accuracy Conduct and oversee regular cycle counts, stock audits, and full inventory reconciliations Lead efforts to identify, investigate, and resolve inventory discrepancies and root cause issues Ensure accurate and timely updates to inventory records in warehouse management systems (WMS) Generate, analyze, and present reports on inventory levels, variances, trends, and accuracy metrics Develop and implement continuous improvement strategies to enhance inventory accuracy and efficiency Warehouse Operations & Logistics Supervise daily warehouse activities including quality assurance, space management, floor productivity, shipping, and receiving operations Develop and maintain warehouse operations systems by determining product handling and storage requirements, equipment utilization, and processing methods Oversee inventory movements, picking accuracy, packaging standards, and distribution processes Schedule and coordinate warehouse workflow to maximize efficiency and meet customer service standards Oversee logistics for transporting products to customers and company facilities, ensuring efficient delivery coordination Review and optimize workflows, space allocations, equipment layouts, and operational procedures Safety, Compliance & Maintenance Maintain a safe, clean, and organized warehouse environment in accordance with company standards and OSHA regulations Inspect equipment, tools, and machinery regularly and coordinate general maintenance when necessary Establish and enforce safety standards, procedures, and best practices Ensure compliance with the requirements of the company's Quality Management System Collaboration & Process Improvement Partner with warehouse leadership and cross-functional teams to align inventory practices with operational goals Meet regularly with management to analyze productivity, inventory performance, and develop actionable plans for loss prevention Train and support warehouse staff on inventory procedures, WMS usage, and operational standards Identify opportunities for process optimization and implement solutions to improve accuracy and efficiency Required Skills, Experience, and Education: High School Diploma 2-4+ years of experience in inventory control and warehouse operations Bilingual in Spanish is required Hands-on experience with cycle counting, inventory audits, and discrepancy resolution Proficient with warehouse management systems (WMS) and inventory control software Strong analytical skills with ability to interpret data and identify trends Excellent organizational and time management abilities Strong attention to detail and commitment to accuracy Ability to work independently and collaborate effectively with cross-functional teams Forklift certification preferred or willingness to obtain Preferred Qualifications: Associate's degree in Supply Chain Management, Logistics, or related field Previous supervisory or leadership experience Experience in manufacturing or distribution environments Lean/Six Sigma knowledge or certification

Accelerate the possible by joining a winning Amcor team that's transforming the packaging industry and improving lives around the world. At Amcor, we unpack possibility through our innovative and responsible packaging to provide solutions that benefit our customers, our people and our planet. More than 10,000 consumers worldwide encounter our products every second and rely on us for safe access to food, medicine and other goods. We value their trust by making safety our guiding principle. It's our core value and integral to how we do business. Beyond this core principle, our shared values and behaviors unite us as we work together to elevate customers, shape lives and protect the future. We champion our customers and help them succeed. We play to win - adapting quickly in an everchanging world - and make smart choices to safeguard our business, our communities and the people we serve for generations to come. And we invest in our world-class team, empowering our colleagues to unpack their potential, because we believe when our people grow, so does our business. To learn more about playing for Team Amcor, visit ************* I LinkedIn I Glassdoor I Facebook I YouTube Job Description Major Responsibilities: This job family includes both the shipping and material handling functions for the Warehouse. While there are many duties common to both positions, there are also some duties and responsibilities applicable to each function separately. Employees begin their assignment in the material handling function and are cross trained in the shipping function upon gaining experience as a Material Handler. Under the supervision of the Warehouse/Transportation Supervisor, operates forklift to move materials to the lines as needed and to move pallets of finished goods to the staging area for the Warehouse; loads and unloads trailers, pulls product, moves product with lift truck/turret truck within the warehouse and onto trucks. Essential Duties and Responsibilities include the following. Other duties may be assigned. Duties Common to All Positions · Follows all Company policies regarding safety, quality and attendance. Performs duties in a safe manner and reports all observed safety hazards to management. Acts as a role model for Safety on shift. Participates in safety programs by reporting Unsafe Conditions, Unsafe Acts and Close Calls; enters Near Miss data and observations into Global Data Center database (GDC) · Responsible for housekeeping activities such as sweeping/moping tire marks by baler/stretch-wrap areas; picks up trash bags and empties recycle bins on production floor.; picks up and bales cardboard from production floor. · Completes crown lift or forklift safety checklist; changes battery and fills battery cells with water on crown lift; fills propane tank on forklift. · Completes packaging orders by: locating and pulling packaging in the warehouse racks and placing packaging on the designated area on the production floor. Consolidates similar packaging on the production floor as orders are placed by production personnel. Returns unused packaging to Warehouse. · Participates in employee driven teams to address a variety of operations related issues. Material Handler Duties · Completes work orders by: pulling finished goods from lines, taking it to stretch wrap, weighing pallets and scanning finished goods pallet to JDE; transfers completed work. Retrieves pallets from outside and supplies to production lines by stacking appropriate number on pallet pal and removing them as needed during the production process; removes broken pallets and replaces with new ones; places broken pallets in designated area. · Picks up, weighs, labels and bails non-conforming product from production lines; places bailed product in staging area; fills out the appropriate non-conforming product forms · Gets master-batch from racks and places it on the dumper; operates dumper to fill master[1]batch holder and takes it to appropriate location on the production floor; breaks down empty gaylord and takes to cardboard recycling area. · Safely operates and maintains baler and stretch wrap machine as needed. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Other Skills and Abilities: Must be able to obtain a forklift operator license. Computer Skills - To perform this job successfully, an individual should have knowledge of general computer systems in order to utilize automated product scanning software. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job in Manufacturing, the employee is regularly required to lift, move and carry boxes of materials and/or equipment, unassisted, weighing up to 35 pounds. Employees must be able to drive a forklift and must have 20/20 vision with corrective lenses. Employees must have manual dexterity to use scanner and to key information into computer system. Our Expectations We expect our people to be guided by The Amcor Way and demonstrate our Values every day to enable the business to win. We are winning when: Our people are engaged and developing as part of a high-performing Amcor team Our customers grow and prosper from Amcor's quality, service, and innovation Our investors benefit from Amcor's consistent growth and superior returns The environment is better off because of Amcor's leadership and products Equal Opportunity Employer/Minorities/Females/Disabled/Veterans/Sexual Orientation/Gender Identity Amcor is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. If you would like more information about your EEO rights as an applicant under the law, please click on the "Know Your Rights: Workplace Discrimination is Illegal" Poster . If, because of a medical condition or disability, you need a reasonable accommodation for any part of the employment process, please call ************ and let us know the nature of your request and your contact information. E-Verify We verify the identity and employment authorization of individuals hired for employment in the United States. Benefits When you join Amcor, you will have access to a comprehensive benefits and compensation package that includes: Medical, dental and vision plans Paid time off, starting at 40 hours per year for full-time hourly employees, may vary by location Company-paid holidays starting at 8 days per year and may vary by location Wellbeing programs & Employee Assistance Program Health Savings Account/Flexible Spending Account Life insurance, AD&D, short-term & long-term disability, and voluntary benefits Paid Parental Leave Retirement Savings Plan with company match Tuition Reimbursement (dependent upon approval) Discretionary bonus program (initial eligibility dependent upon hire date)

←Back to all jobs at Third Coast NAPA WAREHOUSE ASSOCIATE - Store #331 Job Title: Warehouse Associate Classification: Non-Exempt About Us: Third Coast Distributing was founded in 2013 and is part of a global service organization engaged in the distribution of automotive and industrial replacement parts. Doing business as NAPA Auto Parts, TCD serves thousands of customers from an independent network across South and Central Texas. About The Role: We have lots of parts available to our customers and the role of a Warehouse Associate plays a major part in our operations getting these parts from store to store. Position reports to the Store Manager. Key Responsibilities: Unpacks incoming merchandise shipments from suppliers or returned by customers. Pulls all orders for standard customer stock orders, special orders, and the demands of the main counter. Ensures proper end processing of customer orders and ensures accurate packaging of products. Plan, organize, and load trucks from skids to trucks for delivery to customer. Cleans up and disposes boxes, packing material, and pallets, as well as general housekeeping of facility and specific product line areas. Ensure overall cleanliness of the front counter, salesfloor, and back areas. Follows and adheres to all safety procedures including the handling of hazardous materials. Protect self, co-workers, and customers by maintaining a safe and clean store environment. Demonstrate a positive, helpful attitude as well as professional conduct and appearance at all times. Understand and comply with all Company policies. About You: The ideal candidate will have the following knowledge, skills, and abilities: A minimum of 1 year experience working freight/product in a warehouse or distribution center environment. Knowledge of cataloging and/or inventory management systems is a plus. Familiarity with automotive parts is desired but not required. High School diploma or equivalent. Must enjoy working with people in a fast-paced and exciting environment. Scan, handle and move merchandise efficiently and safely, including frequently lifting or moving merchandise up to 15 pounds and occasionally lifting or moving merchandise up to 60 pounds. Please apply if you think this is a great fit for you and we will be in touch. Our online application is quick and easy! This is not an all-inclusive list of duties performed, but rather a reflection of typical work performed in the position. The does not restrict supervisors from assigning additional responsibilities not specified in the job description. Third Coast Distributing is an equal employment opportunity employer who may provide reasonable accommodation to enable individuals with disabilities to perform the essential functions of the job. Please visit our careers page to see more job opportunities.

Company:INEOS Nitriles Interested in joining a winning team? A team whose employees share in the ownership of the business and are empowered to make a difference? Job Title: Shipping Technician JOB PURPOSE The Shipping Technician is responsible for safely operating all equipment involved with receiving, storing, transferring, and loading of products via drums, trucks, rail cars, water vessels or tanks. The Shipping Technician is also responsible for the sampling of products and documentation of results; maintenance of Site/Terminal equipment; preparation of required reports; and general maintenance and upkeep of the facility. The Shipping Technician is a member of the plant Emergency Response Team and subject to call 24 hours/day 7 days/week for emergencies (hazardous chemical, personnel rescue and/or fire response RESPONSIBILITIES AND ACCOUNTABILITIES Uphold safety as the highest priority. Adhering to and supporting the INEOS 20 Principles and INEOS Global Life Saving Rules. All job activities should be executed in a safe and efficient manner consistent with the INEOS 20 Principles and the Culture of Prevention. Maintain open communications with operating and loading personnel to ensure continuity of safe, efficient operations. Work independently or in conjunction with other operators to Start up, Maintain, and Shut down the loading processes under normal and emergency conditions as outlined in operating procedures. Follow all Site procedures and contribute to documenting and improving procedures. Perform Job Tasks as outlined in SOPs. Monitor the loading instrumentation and equipment to collect information and ensure proper operation. Typical instrumentation and equipment would include but not be limited to gauges (temperature, pressure, flow), pumps, compressors, scrubbers, blowers, heat exchangers, vessels, and filters. Operate heavy equipment associated with moving empty / full railcars to facilitate the loading activities. Record process information and operating activities on log sheets, logbooks and electronic formatted devices. Responsible for performing a thorough shift handover during shift relief. Collect samples as outlined in the sample plan or as requested. Support plant unit operations as deemed necessary through guidance from the SSM and/or Step Up. Complete computer-based training (VTA's) on schedule. Update Site Shift Manager or OSBL Day Manager, on process conditions changes. This would typically include but not be limited to loading changes, upset conditions, and equipment failures. Work in conjunction with other operators to maintain stable operation of the plant by communicating pertinent process information. This would typically include but not be limited to loading changes, upset conditions, and equipment failures. Work with supervision to troubleshoot and optimize the process. This would typically include but not be limited to conditions affecting safety, efficiency, capacity, and product quality. Help maintain plant integrity by ensuring the equipment is in good, safe, regulatory compliant condition. Identify maintenance issues to maintenance through communication or SAP/work order system. Prepare equipment and pipe systems for removal, maintenance, or repairs. This will be performed under the guidance of supervision. This work will require pulling, pushing, lifting, and carrying of parts, equipment, and tools. It will also require the use appropriate tools and PPE to properly open, close, remove, and secure items and issuing Work Permits. Perform routine plant maintenance and repairs. This work will be performed under the guidance of shift supervision and possibly in conjunction with maintenance personnel. This work will require pulling, pushing, lifting, and carrying of parts, equipment, and tools. It will also require the use appropriate tools and PPE to properly open, close, remove, and secure items. Perform routine and non-routine housekeeping required to maintain designated process area clean and safe. Make the necessary field connections for loading/unloading operations. Turn valves or move controls to maintain system at specified temperature, pressure and flowrate. Routinely perform vessel loading as a PIC to maintain knowledge/certification and/or cover for vacant positions. Assist the Safety Department in reviewing and auditing the process as requested. Maintain up-to-date certifications, qualifications, and training records based on regulatory agency compliance and the INEOS emergency response team requirements, including off-site activities. EDUCATION/EXPERIENCE REQUIRED High School Diploma or equivalent History of high job performance. Prior petrochemical industry experience, training, and higher education are a plus. SKILLS/COMPETENCIES Knowledge of lock out tag out and permit to work processes. Good ability of hazard recognition and safe work practices. Strong work ethic and teamwork Ability to use: The use of the following electronic devices will be required: electronic calculator, personal computer, handheld device, and two-way radio, LEL/O2 meter. Knowledge of the following software will be required: Distributive Control System (DCS), Data Historian, spreadsheets, word processor, e-mail, and document management. The use of the following tools and equipment will be required: forklift, loading chocks, railcar switching engine, hand tools, ladder, chain hoists, power washer, and man lift. PHYSICAL REQUIREMENTS Ability to perform duties and climb stairs while wearing 35 lb Self Contained Breathing Apparatus (SCBA), Fire Bunker Gear or fully enclosed Hazardous Chemical Suit for 30 minutes at a time. Ability to climb fixed vertical ladder cages at heights up to 30 ft. To a total of 200 ft. (Ladder cages provide rest stop every 30 ft.) Ability to climb 6 flights of stairs carrying a weighted object, i.e., Fire Extinguisher. Ability to open/close large valves. Ability to enter enclosed spaces through 24” manway, for rescue and permitting purposes. Ability to lift 50 lbs. or rescue a person while wearing necessary PPE. Able to pull approximate 100 lbs., as a part of Emergency Rescue. Ability to wear required personal protective equipment: hard hat, safety glasses, chemical goggles, faces shield, rigid safety shoes/boots, full/half face cartridge masks. Ability to perform Emergency Response Duties. Ability to safely work with hazardous chemicals according to facility policies and procedures. Must be able to work outdoors/inclement weather. Job specific: Climbing, balance, stoop/bend, kneel, squat, crouch, crawl, lift, carry, endurance, push/pulling. Must be able to tolerate confined spaces and work at heights. Operate emergency response vehicles. Ambulance, fire truck, response van. Automatic/standard transmission. Need to evaluate understanding of proper lifting techniques and body mechanics. Must possess valid driver's license to operate emergency equipment, i.e., ambulance/fire truck Our culture is one of honesty and integrity with an emphasis on safety, health and environmental performance. On our team, people are acknowledged for embracing new practices that help create real value for customers.

Company: INEOS Nitriles Interested in joining a winning team? A team whose employees share in the ownership of the business and are empowered to make a difference? Job Title: Shipping Technician JOB PURPOSE The Shipping Technician is responsible for safely operating all equipment involved with receiving, storing, transferring, and loading of products via drums, trucks, rail cars, water vessels or tanks. The Shipping Technician is also responsible for the sampling of products and documentation of results; maintenance of Site/Terminal equipment; preparation of required reports; and general maintenance and upkeep of the facility. The Shipping Technician is a member of the plant Emergency Response Team and subject to call 24 hours/day 7 days/week for emergencies (hazardous chemical, personnel rescue and/or fire response RESPONSIBILITIES AND ACCOUNTABILITIES * Uphold safety as the highest priority. * Adhering to and supporting the INEOS 20 Principles and INEOS Global Life Saving Rules. * All job activities should be executed in a safe and efficient manner consistent with the INEOS 20 Principles and the Culture of Prevention. * Maintain open communications with operating and loading personnel to ensure continuity of safe, efficient operations. * Work independently or in conjunction with other operators to Start up, Maintain, and Shut down the loading processes under normal and emergency conditions as outlined in operating procedures. * Follow all Site procedures and contribute to documenting and improving procedures. * Perform Job Tasks as outlined in SOPs. * Monitor the loading instrumentation and equipment to collect information and ensure proper operation. Typical instrumentation and equipment would include but not be limited to gauges (temperature, pressure, flow), pumps, compressors, scrubbers, blowers, heat exchangers, vessels, and filters. * Operate heavy equipment associated with moving empty / full railcars to facilitate the loading activities. * Record process information and operating activities on log sheets, logbooks and electronic formatted devices. * Responsible for performing a thorough shift handover during shift relief. * Collect samples as outlined in the sample plan or as requested. * Support plant unit operations as deemed necessary through guidance from the SSM and/or Step Up. * Complete computer-based training (VTA's) on schedule. * Update Site Shift Manager or OSBL Day Manager, on process conditions changes. This would typically include but not be limited to loading changes, upset conditions, and equipment failures. * Work in conjunction with other operators to maintain stable operation of the plant by communicating pertinent process information. This would typically include but not be limited to loading changes, upset conditions, and equipment failures. * Work with supervision to troubleshoot and optimize the process. This would typically include but not be limited to conditions affecting safety, efficiency, capacity, and product quality. * Help maintain plant integrity by ensuring the equipment is in good, safe, regulatory compliant condition. Identify maintenance issues to maintenance through communication or SAP/work order system. * Prepare equipment and pipe systems for removal, maintenance, or repairs. This will be performed under the guidance of supervision. This work will require pulling, pushing, lifting, and carrying of parts, equipment, and tools. It will also require the use appropriate tools and PPE to properly open, close, remove, and secure items and issuing Work Permits. * Perform routine plant maintenance and repairs. This work will be performed under the guidance of shift supervision and possibly in conjunction with maintenance personnel. This work will require pulling, pushing, lifting, and carrying of parts, equipment, and tools. It will also require the use appropriate tools and PPE to properly open, close, remove, and secure items. * Perform routine and non-routine housekeeping required to maintain designated process area clean and safe. * Make the necessary field connections for loading/unloading operations. * Turn valves or move controls to maintain system at specified temperature, pressure and flowrate. * Routinely perform vessel loading as a PIC to maintain knowledge/certification and/or cover for vacant positions. * Assist the Safety Department in reviewing and auditing the process as requested. * Maintain up-to-date certifications, qualifications, and training records based on regulatory agency compliance and the INEOS emergency response team requirements, including off-site activities. EDUCATION/EXPERIENCE REQUIRED * High School Diploma or equivalent * History of high job performance. * Prior petrochemical industry experience, training, and higher education are a plus. SKILLS/COMPETENCIES * Knowledge of lock out tag out and permit to work processes. * Good ability of hazard recognition and safe work practices. * Strong work ethic and teamwork Ability to use: The use of the following electronic devices will be required: electronic calculator, personal computer, handheld device, and two-way radio, LEL/O2 meter. Knowledge of the following software will be required: Distributive Control System (DCS), Data Historian, spreadsheets, word processor, e-mail, and document management. The use of the following tools and equipment will be required: forklift, loading chocks, railcar switching engine, hand tools, ladder, chain hoists, power washer, and man lift. PHYSICAL REQUIREMENTS * Ability to perform duties and climb stairs while wearing 35 lb Self Contained Breathing Apparatus (SCBA), Fire Bunker Gear or fully enclosed Hazardous Chemical Suit for 30 minutes at a time. * Ability to climb fixed vertical ladder cages at heights up to 30 ft. To a total of 200 ft. (Ladder cages provide rest stop every 30 ft.) * Ability to climb 6 flights of stairs carrying a weighted object, i.e., Fire Extinguisher. Ability to open/close large valves. Ability to enter enclosed spaces through 24" manway, for rescue and permitting purposes. * Ability to lift 50 lbs. or rescue a person while wearing necessary PPE. * Able to pull approximate 100 lbs., as a part of Emergency Rescue. * Ability to wear required personal protective equipment: hard hat, safety glasses, chemical goggles, faces shield, rigid safety shoes/boots, full/half face cartridge masks. * Ability to perform Emergency Response Duties. * Ability to safely work with hazardous chemicals according to facility policies and procedures. * Must be able to work outdoors/inclement weather. * Job specific: Climbing, balance, stoop/bend, kneel, squat, crouch, crawl, lift, carry, endurance, push/pulling. * Must be able to tolerate confined spaces and work at heights. Operate emergency response vehicles. Ambulance, fire truck, response van. Automatic/standard transmission. * Need to evaluate understanding of proper lifting techniques and body mechanics. * Must possess valid driver's license to operate emergency equipment, i.e., ambulance/fire truck Our culture is one of honesty and integrity with an emphasis on safety, health and environmental performance. On our team, people are acknowledged for embracing new practices that help create real value for customers.

Responsibilities: Shipping & receiving Order fulfillment Inventory management Forklift operation (preferred) Maintain warehouse cleanliness

This position is responsible for performing audits of client inventories, storage site inspections and inventory closeouts. J. Knipper and Company and KnippeRx are Equal Opportunity Employers Responsibilities KEY RESPONSIBILITIES: (List of essential responsibilities and duties) (Duties may include, but not limited to all or some of the following.) Conduct audits of client inventories at client specified storage site. Follow client business rules, finalize necessary reconciliation(s), and complete required documentation. Complete all assignments in a professional and timely manner in accordance with Company and Client business rules. Submit all assignment status changes using the on-line Audit Inventory Management System (AIMS). Review all instructions and forms required to complete assignments prior to audit to ensure quality service levels. Ensure that assignments are scheduled in accordance within Client expectations and timelines Communicate with client representatives and AIMS management team via email, US mail, and/or phone. *The above duties are meant to be representative of the position and not all-inclusive. Other Responsibilities: Ability to utilize smartphone to update AIMS and complete assignments. Follow all department and company policies and procedures. Strive to exceed client needs. Communicate clearly and professionally in email and phone calls. Qualifications MINIMUM JOB REQUIREMENTS: Education/Training: High School Diploma or GED Required College Degree Preferred Must have mobile electronic device. Must have transportation to audit sites. If driving a motor vehicle, must have valid driver's license with records that satisfy Company standards as well as current motor vehicle insurance. Related Experience: Pharmaceutical industry and/ or Pharmaceutical Sales experience preferred. Knowledge, Skills, and Abilities: Strong communication skills, intermediate math skills, attention to detail, and computer skills Physical Requirements: May be required to bend, squat, kneel, or stand for long periods. May be required to lift up to 25 lbs. periodically Reasonable accommodations may be made to enable individuals with disabilities to perform the essential responsibilities of this job.