Technician jobs in Annandale, VA

About this Job: Performs angiographic therapeutic and interventional procedures. Responsible for patient management prior to during and after the procedure. Primary Duties and Responsibilities Contributes to the achievement of established department goals and objectives and adheres to department policies procedures quality standards and safety standards. Complies with governmental and accreditation regulations. Administers contrast media into the coronary arteries as directed by a Cardiologist during a cardiac catheterization procedure. Recognizes the effect of pathology and vital signs to determine the amount of pressure of each hand injection. Applies knowledge of the normal physiologic and electrocardiographic sequences of cardiac contraction and recognizes both minor and dangerous arrhythmia. Provides appropriate patient care as required. Functions as a first assistant to the physician by scrubbing independently and aiding in the manipulation and placement of guide wires and catheters. Administers contrast media in accordance with physician instruction. Maintains adequate basic interventional and cardiac supplies. Orders supplies from outside vendors in hospital purchasing system. Assists supervisor with all aspects of inventory control. Maintains all appropriate patient records and department check sheets. Correctly enters patient and supply information into the RIS and/or hospital computer system. Performs angiographic therapeutic and interventional imaging procedures. Performs electrophysiology and ablation procedures. Provides quality patient care and monitoring during all phases of the procedure in accordance with physician instructions and established policy. Has knowledge of all equipment inventory and location of supplies. Operates emergency equipment safely. Performs hemodynamic physiologic patient monitoring recording calculations of cardiovascular procedures. Responds to on-call emergencies in accordance with department policy. Responsible for post-procedural duties including observation and management of catheter and/or device insertion site and patient discharge instructions. Provides patient transportation and communicates patient care status to receiving care unit. Responsible for pre-procedural duties such as sterile tray preparation procedural patient education and confirmation of required lab work and patient medical history including indications for the study and all previous related exams. Safely operates all imaging equipment (for example digital equipment pressure injectors processors rapid film changer and cine) to produce high-quality diagnostic images in accordance with departmental policy. Schedules and maintains orderly patient flow. Participates in meetings and on committees and represents the department and hospital in community outreach efforts. Participates in multi-disciplinary quality and service improvement teams. Minimal Qualifications Education Satisfactory completion of an AMA-approved school of Radiologic Technology of at least 2 years duration. required Experience 2 years experience in diagnostic radiology required Experience in interventional radiology/cardiac catheterization or equivalent required Licenses and Certifications ARRT certification or registration. required Radiology Technologist license in the State of Maryland. required ACLS - Advanced Cardiac Life Support Certification or eligibility required CPR - Cardiac Pulmonary Resuscitation (includes BLS and NRP) for healthcare providers from either the American Heart Association (AHA) or American Red Cross within 90 Days required Additional unit/specialty certifications may vary by department or business unit. Knowledge Skills and Abilities Basic computer skills. Verbal and written communication skills. This position has a hiring range of : USD $42.82 - USD $78.27 /Hr.

Achieving our goals starts with supporting yours. Grow your career, access top-tier health and wellness benefits, build lasting connections with your team and our customers, and travel the world using our extensive route network. Come join us to create what's next. Let's define tomorrow, together. Description At United, we have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they're well taken care of and ready to get our customers to their desired destinations. If you're ready to work on our planes, join our Tech Ops experts and help keep our fleet in tip-top shape. The sign-on bonus is exclusively for external candidates, internal applicants are not eligible to receive the sign-on incentive. Key Responsibilities: Requires a thorough knowledge of general building maintenance with emphasis on electrical solving, including AC & DC circuits, high voltage (480), high amperage and some 400 cycle equipment Requires experience in industrial wiring and the ability to read and follow wiring schematics and work without supervision Journeyman electrical license a plus Requires the ability to make low and high voltage repairs to all building electrical equipment This includes solving, installation and repair of 110/220/480 volt single and multiphase electrical circuitry and devices You should also have some experience in related building equipment and trades, such as air handling units, plumbing and steam fitting, fire systems and conveyors Facilities Technicians must be able to work around the clock shifts, including weekends and holidays, in the outdoors in all weather conditions Schedules are bid and awarded according to seniority Facilities Technicians are represented by the International Brotherhood of Teamsters (IBT) Salary increases will be administered according to the current IBT/United contract New employees are required to join the union within ninety (90) days of employment There is an initiation fee for joining the union and subsequent monthly union dues which are set by the Local Lodge Qualifications United values diverse experiences, perspectives, and we encourage everyone who meets the minimum qualifications to apply. While having the “desired” qualifications make for a stronger candidate, we encourage applicants who may not feel they check ALL of those boxes! We are always looking for individuals who will bring something new to the table! What's needed to succeed: Twenty Four months experience required in at least three of the following areas: Electrical (including 480 volt, 3 phase) Structural (including steel frame construction) HVAC (including building management systems) Mechanical (including conveyors) Plumbing PLC electronic/computer controls Must have completed high school diploma, GED or equivalent Ability to maintain and repair all building disciplines, heavy mechanical and welding Work may be indoors or outside or in elevated areas anywhere on airport Must be able to climb and work from ladders, and/or walk for extended periods Moderate lifting Must possess sufficient tooling to perform required tasks Computer experience for input and retrieval of data Qualified candidates must be immediately available for full time employment Must possess a valid, clean, applicable state driver's license What will help you propel from the pack: Electronics diagnostics and troubleshooting United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact JobAccommodations@united.com to request accommodation. The starting rate for this role is $34.52. This is also a bonus eligible position (i.e. profit sharing). We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement). United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. Equal Opportunity Employer - Minorities/Women/Veterans/Disabled/LGBT. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact JobAccommodations@united.com to request accommodation.

Securitas Technology and Solutions groups are experiencing tremendous success, and we currently have an Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on Securitas Technology products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. Securitas Technology is a leading, global provider of integrated security and facility solutions that contain best-in-class products and award-winning services for an organization's unique needs. Securitas Technology security solutions include product and service outsourcing that integrate cross-disciplinary functions into comprehensive technology-centered customer solutions on a cloud-based platform spanning hardware and software capabilities. Position Description: Installs intrusion, fire, CCTV, and access control security systems. Run electrical wiring in attics, crawl spaces, and other confined spaces, which can include drilling, trenching and aerial runs. Complete all wiring, connections, and equipment installations ensuring that security systems are complete and satisfy customer and contractual requirements. Assists and interfaces with the Installation Team Lead or Project Manager regarding on-site scheduling of work activities and timely delivery of equipment. Conducts tests to ensure all newly installed systems and component devices are operational. Troubleshoots new system installations to ensure proper functioning and to ensure system meets local, county, state or federal codes; legal and/or insurance requirements. Presents a professional image both in personal and vehicle appearance. Performs work assignments in a safe manner and within specified cost limits. Promotes, builds, and maintains good customer relations and assists with contract retention. Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Electronic Security policies and procedures including all safety requirements. Keeps abreast of changes and new developments in products and technology. Attends and completes training programs as requested. Job Requirements: MUST HOLD 3 or more years' experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems. High School Diploma or equivalent Vocational/Technical Degree in electrical, security, or computer systems preferred. NICET Certification preferred. Lenel, Pro-Watch, Software House, Picture Perfect certifications preferred. Bosch, Honeywell, Radionics, or DMP system knowledge preferred. Edwards/EST, Simplex, or GE/Mirtone system knowledge preferred. IP Video and IT experience preferred. Climb ladders that extend up to 24 ft. in height. Carry items up to 75 pounds. Ability to work on-call on a rotational basis covering after hours & weekend emergency calls. A valid state driver's license, without restrictions, is required. The following states require specific state security licensing requirements: Washington, Oregon, and Oklahoma. Check with local branch for licensing requirements. Benefits: Highly competitive salary Company Vehicle Company Cell Phone Medical, Dental, Vision, and Life Insurance Company Paid Short Term Disability 401K with 60% Match Paid vacation, holiday, sick, and personal days Educational Assistance Exceptional growth opportunities We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

About the Company Our client is an innovative, fast-growing technology organization committed to building solutions that support critical missions and enable teams to work securely, efficiently, and collaboratively. With multiple U.S. locations and a global presence, the company fosters a culture centered on integrity, teamwork, and purposeful impact. Job Description The IT Access Control Technician will support both Information Technology and Facilities/Security functions to ensure employees have safe, seamless access to company facilities and the technology resources they need. This role is part of the Service Delivery team within Enterprise Operations and collaborates closely with Security, Facilities, and HR partners. The position may be based in several U.S. office locations, with occasional travel to other sites as needed. What You'll Do: Manage physical access control and badge issuance processes for employees, contractors, and visitors. Support onboarding and offboarding workflows to ensure proper access is granted and removed. Maintain accurate records of access permissions and perform routine audits for compliance and consistency. Troubleshoot and resolve access-related issues and support general IT service needs as part of the Service Delivery team. Assist with device preparation, inventory tracking, and setup for new team members. Contribute to facility and infrastructure projects, including new location integrations and upgrades to security-related systems. Document procedures, workflows, and support guidelines to ensure continuity and clarity across teams. Required Qualifications: Candidates must possess strong people skills with the ability to create a welcoming and supportive experience. Experience in IT support, facilities operations, security administration, or similar roles. Strong attention to detail and commitment to following security and confidentiality protocols. Excellent interpersonal and communication skills, with a focus on customer service and cross-team collaboration. Ability to learn quickly, adapt to evolving processes, and work in a fast-paced environment. Preferred Qualifications: Experience working in environments where IT and physical security intersect. Familiarity with access management workflows, onboarding/offboarding processes, or ticketing systems. Interest in compliance, operational excellence, and continuous improvement. Relevant coursework, certifications, or hands-on experience (not required, but a plus). “Skills, experience, and other compensable factors will be taken into account when determining pay rate. The pay range provided in this posting is a reflection of a W2 hourly rate; other employment options may be available that may result in pay outside of the provided range.” “W2 employees of Eliassen Group who are regularly scheduled to work 30 or more hours per week are eligible for the following benefits: medical (choice of 3 plans), dental, vision, pre-tax accounts, other voluntary benefits including life and disability insurance, 401(k) with match, and sick 􀆟me if required by law in the worked-in state/locality.”

Mobility Services Team RESPONSIBILITIES: Provide modern smartphone and tablet technology for remote and local users across 8 building campus. Provide support for new and ongoing Mobility related projects. Provide support for mobile device migration efforts. Respond to requests from internal and authorized external business units in a timely manner for Tier II support: telephone, e-mail, remote control, and occasional on-site problem diagnosis and resolution for mobile device issues. Enforce mobile device policies and procedures in the EMM environment. Integrate commercial off-the-shelf and in-house mobile applications into the MDM catalog and ensure deployment of those applications. Cooperate with consultants for installations, deployments, and troubleshooting of new releases as needed. Manage service vendor(s) to ensure quality and provide feedback on ways the vendor(s) can improve services. Maintain system integrity and security by resolving issues from compliance scans. Maintain system configuration design documentation and MDM continuity documentation. QUALIFICATIONS: 1 to 3 years of hands-on experience in Mobile device support, IT Asset Management, IT Customer Support, IT Service Delivery, IT Application Development, IT Business Analysis, or other IT related fields in a large enterprise organization. 1-3 years of relevant work experience and basic knowledge with Mobile Device Management (MDM), Enterprise Mobility Management (EMM), or Unified Endpoint Management (UEM) and tools such as Workspace One (AirWatch), Verizon MDM, Apple Business Manager, and Microsoft Intune is a plus. Knowledgeable with both iOS and Android devices. Strong customer and team orientation with a focus on collaboration, an ability to work independently, and a high level of professionalism and quality. Willingness to grow and learn with a new IT team in a cutting-edge technology discipline Strong organizational and customer service skills with attention to detail. Excellent written and verbal communication skills; interpersonal and collaborative skills; with the ability to effectively relate and communicate at all levels, including explaining technical matters in business terms. Ability to plan and prioritize workload to meet implementation schedules and minimize schedule conflicts. Dexian is a leading provider of staffing, IT, and workforce solutions with over 12,000 employees and 70 locations worldwide. As one of the largest IT staffing companies and the 2nd largest minority-owned staffing company in the U.S., Dexian was formed in 2023 through the merger of DISYS and Signature Consultants. Combining the best elements of its core companies, Dexian's platform connects talent, technology, and organizations to produce game-changing results that help everyone achieve their ambitions and goals. Dexian's brands include Dexian DISYS, Dexian Signature Consultants, Dexian Government Solutions, Dexian Talent Development and Dexian IT Solutions. Visit ******************* to learn more. Dexian is an Equal Opportunity Employer that recruits and hires qualified candidates without regard to race, religion, sex, sexual orientation, gender identity, age, national origin, ancestry, citizenship, disability, or veteran status.

$5,000 Sign-On Bonus Available Receive 17% Weekday Nights, 26% Weekend Nights and 15% Weekend Day shift differentials Minimum Offer $ 22.49/hr. Maximum Offer $ 33.74/hr. Compensation Disclaimer Compensation for this role is based on a number of factors, including but not limited to experience, education, and other business and organizational considerations. Department: Labor and Delivery FTE: 0.90 Full Time Shift: Days Position Summary: Under the direction of a Registered Nurse, the Surgical Tech contributes to the company's mission and vision by assisting with the provision of safe and effective nursing care in accordance with a defined scope of practice within the operating room, and maintaining an understanding and knowledge base for the function of each instrument for multiple services. This may include direct patient care and observation, scrubbing and assisting the surgeon at the operative field, surgical room turnover between cases, act as a preceptor and consistent collaboration with the Registered Nurse in clinical decision making. The services covered may include but are not limited to: Vascular, Cardiac, Neurosurgery, Robotics, Spine, Orthopedics, Urology, General Oncology, Gynecology Oncology, Ear Nose and Throat, General, Eyes, Burns, Plastics, Gynecology, Dental. Ensure adherence to Hospitals and departmental policies and procedures in a Level I Trauma Hospital. Patient care assignment may include Neonate, Pediatric, Adolescent, Adult and Geriatric age groups. Detailed responsibilities: * EQUIPMENT & SUPPLIES - Work with staff team to gather necessary supplies, equipment and instruments * EQUIPMENT - Set up tables, instruments and supplies required for specific operations * PATIENT CARE - Assist in preparing and draping of patient and operating area; prepare and maintain sterile field for surgical procedures * SPECIMENS - Assist in maintenance and care of specimens; prepare specimens for laboratory analysis * EQUIPMENT & SUPPLIES - Decontaminate all equipment, instruments, and supplies * DEVELOPMENT - Enhance professional growth and development through participation in educational programs, reading current literature, attending in-services, meetings and workshops * PATIENT SAFETY 1 - Follow patient safety-related policies, procedures and protocols * PATIENT SAFETY 2 - Demonstrate proactive approach to patient safety by seeking opportunities to improve patient safety through questioning of current policies and processes * PATIENT SAFETY 3 - Identify and report/correct environmental conditions and/or situations that may put a patient at undue risk * PATIENT SAFETY 4 - Report potential or actual patient safety concerns, medical errors and/or near misses in a timely manner * PATIENT SAFETY 5 - Encourage patients to actively participate in their own care by asking questions and reporting treatment or situations that they don't understand or may "not seem right" * PATIENT CENTERED MED - Adhere to and promote the core expectations of the Patient Centered Medical Home or Patient Centered Specialty Practice as applicable * SUPPLIES - Obtain supplies, instruments, and other required items for the surgical case(s); arrange the supplies and instruments in case carts according to set procedures ensuring accuracy and proper documentation; ensure sterility of instrumentation; keep Operating Rooms neat, clean and stocked * STERILE TEAM - Function as a member of the sterile team in donning gown and gloves, creating and maintaining a sterile field, and issuing instruments to surgeons * COMMUNICATE - Communicate updates or necessary changes for the surgeon preference card to the appropriate coordinator * ASSIST - Assist with maintaining equipment/instruments in proper working order; assist with table equipment, patient positioning, and application of immobilization devices and dressings * COMMUNICATION - Verify implants and communicate special request for procedures * SUPPLIES - Return unused supplies/instruments/equipment to appropriate storage area * INSTRUMENTS - Separate and load used instruments into case carts for delivery to sterile processing; report instrument malfunction and place instruments in the appropriate location to be sent for repair; transport contaminated instruments from OR per hospital policy; covered and labeled as biohazard material; collaborate with sterile processing to prioritize instrument turnover * PROCEDURES - Assist with urgent/emergent procedures * INSTRUMENTS - Utilizing Instrument tracking system by scanning instruments to specific location * COMMUNICATION - Report discrepancies, problems, and concerns to management using proper chain of command Qualifications Education: Essential: * High School or GED Equivalent * Program Graduate Education specialization: Essential: * Surgical Technician Experience: Essential: Nonessential: Bilingual English, Spanish, Keres, Tewa, Tiwa, Towa, Zuni, or Navajo 1 and 1/2 year (18 months) directly related experience Credentials: Essential: * CPR for Healthcare/BLS Prov or Prof Rescuers w/in 30 days * Certification of Surgical Technologists Physical Conditions: Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly to move objects or people. Physical Demand requirements are in excess of those for Medium Work. Working conditions: Essential: * Sig Hazard: Chemicals, Bio Hazardous Materials req PPE * May be required or is required to perform on-call duties Department: Clinical Nursing Support

We are currently working with a Washington DC client looking for a Systems Technologist to join their team. This is 100% onsite role in DC (near Chinatown, zip code 20223). Local candidates only. This is a 12-month initial contract on W2 with the potential to extend or convert to FTE. Additionally, this is a cleared role so all candidates must be USC with an active Public Trust Clearance. This position involves close supervision, detailed instructions, and constant performance checks. The technician will provide post-sale installation and maintenance support for communication products, including hardware installations, site equipment audits and customer service response in a break-fix environment. Primary Focus: Mobile and station work associated with Conventional, SmartNet Trunking, and Paging Systems for single-site customers. Key Responsibilities: Programming of mobile and portable radios, and infrastructure (training provided) Organize and pack radio kits for shipment Data entry into MS Excel and MS Word forms, including barcode scanning Equipment handling: Unloading/loading pallets Pick and pack radio system parts/kits per customer specifications Inventory management: Assist with stock take and maintain subscriber inventory accuracy Receiving & dispatching subscriber goods PC Desktop Support/System Admin Level 1 Required Knowledge & Skills: Familiarity with basic communication concepts Basic understanding of RF, telecommunications, and computer networking General/intermediate knowledge of computer hardware and applications for troubleshooting Ability to use basic electronic level meters (DVM, Scope, Wattmeter) Education & Experience: Associates Degree, Technical Certificate, or Military Training 2 years technical work experience

Are you ready to make a direct impact in the pharmaceutical manufacturing space? As a Process Equipment Technician, you'll play a critical role in keeping cutting-edge production lines running smoothly, ensuring life-changing medicines reach the people who need them. This is your chance to apply technical expertise in a high-impact environment where every detail counts. Why You Should Apply Be part of a team manufacturing products that truly improve lives Work hands-on with advanced granulation, drying, and milling technologies Gain exposure to cross-functional collaboration in engineering, quality, and production What You'll Be Doing Install, maintain, troubleshoot, and optimize process equipment for granulation and downstream operations Perform preventive maintenance, calibration, and repairs on complex systems Support equipment qualification (IQ/OQ/PQ) and process improvement projects Collaborate with engineers on optimization, upgrades, and investigations Document all work in compliance with cGMP standards About You Associate's degree in Mechanical, Industrial, or Chemical Engineering Technology preferred Hands-on experience with solid dosage / powder manufacturing equipment Skilled at troubleshooting mechanical, pneumatic, and electrical systems Knowledge of process qualification and regulatory documentation requirements Ability to interpret P&IDs, wiring diagrams, and schematics How To Apply We'd love to see your resume, but we don't need it to have a conversation. Send us an email to *********************** and tell me why you're interested. Or, feel free to email your resume. Please include Job#19534

Data Center Engineering Operations Technician I (DCEO) - On-Site 6-month contract-to-hire Schedule: (12.5 hrs: 5:30 AM/PM - 6:00 PM/AM, 1 hr lunch), 3 on/4 off Compensation: DOE$/hr About the Role The Data Center Technical Operations Engineer will be responsible for Data Center Engineering Operations within an Amazon Data Center. This includes risk management and mitigation, corrective and preventative maintenance of critical infrastructure, vendor management, and metric reporting. Key Responsibilities Manage shift technicians, subcontractors, and vendors according to procedures Set performance benchmarks, conduct analysis, and generate reports Collaborate with IT and business leaders to manage capacity and optimize safety and reliability Operate and manage routine/emergency services on critical systems (generators, UPS, switchgear, CRACs, etc.) Assist in facility design/build-out and improvement projects Manage assets and inventory Assist in technician recruitment Ensure customer demands are met with quality service Why This Role? Hands-on experience within a global-scale data center operations Work alongside a collaborative, high-performing team Opportunity for long-term growth and conversion Exposure to cutting-edge critical infrastructure and technologies A chance to make real impact on uptime and availability for millions of customers worldwide Basic Qualifications High School diploma or equivalent (GED) 1+ years of technical/mechanical trade or certification Strong communication, leadership, and organizational skills Technical troubleshooting and ability to read technical diagrams Procedure and technical writing ability Preferred Qualifications 0-2 years of Data Center Engineering or Management experience Bachelor's Degree in Electrical/Mechanical Engineering or related field Fundamental knowledge of network layout and low-voltage cabling (fiber/copper) EEO STATEMENT Eight Eleven Group is an equal opportunity employer that does not discriminate on the basis of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth, lactation and related medical conditions), gender identity or gender expression, sexual orientation, marital status, military service and veteran status, physical or mental disability, protected medical condition as defined by applicable state or local law, genetic information, or any other characteristics protected by applicable federal, state, or local laws and ordinances.

Immediately hiring a Permanent Full-Time Refrigeration Diesel Technician to support our Truck Fleet at Ryder in Kendallville, IN For More Info Call Jenny or Text "Kendallville T4" to ************ Hear it from a Ryder Technician Employee Here: ********************************************** Hourly Pay:?$34.00 per hour Certification Bonus of $100 for each New ASE Certification Obtained up to $700 Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year Sign On Bonus: Ryder Pays You $2000 at 30 days and $2000 at 90 days Schedule: Sunday - Thursday Hours: First Shift 7:00 am - 3:30 pm At Ryder, Reefer Technicians diagnose, overhaul, adjust, and repair all types of trucks and trailer equipment, with a focus on refrigeration units such as Thermo King and Carrier. Apply Here with Ryder Today For More Info Call Jenny or Text "Kendallville T4" to ************ We have all the benefits other Shops?do?without the wait! Annual Merit Pay Increases Every Year On the Job Paid Training Medical, Dental, Vision, 401 K etc. Start at 30 Days We love our Ryder babies and offer 12 weeks of PAID Maternity Leave Paid Time Off Starts Accruing at DAY ONE with 80 hours per year Additional Day Off for U.S. Military Veterans 401 K offers a company match HIGH VALUED Stock at 15 % Employee Discount PPE, UNIFORMS, AND BOOT ALLOWANCE PROVIDED Ryder Top Technician Recognition Programs rewards 12 Top Techs each year with Cash Prizes from $250 to $50,000! Technician Tuition Repayment Program up to $5,000! Ask your recruiter about it today! For More Info Call Jenny or Text "Kendallville T4" to ************ Click Here to See All Ryder Careers:************************************************ We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday Refer anyone and get rewarded with UNLIMITED bonuses up to $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more! EEO/AA/Female/Minority/Disabled/Veteran Requirements High school diploma or equivalent preferred Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred Basic tools, required Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including: Routine preventative maintenance, which should include oil changes, brake and tire work Diagnostics and repairs, including AC, electrical systems Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, required Four (4) years or more Relevant work experience, preferred Valid Commercial Driver License (CDL) CLASS A,preferred All other certification as required by location, required ADDITIONAL REQUIREMENTS: Ability to perform all T3 tasks Must have demonstrated advanced analytical and repair skills in vehicle maintenance Effective interpersonal communication skills Must have basic computer skills: PC, Windows, mouse, etc. Must be able to lift up to 50 pounds Must be available to work shift work/weekends and on call duty as required Prefer ASE Certification in PM, Brakes, A/C, electrical, Electronics or ASE Master Mechanic Required to operate shop computers and diagnostic test equipment proficiently Must have minimum tool requirement Must road test vehicles as necessary Demonstrated ability to coach/mentor/influence others This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must: Must be able to obtain CDL within 6 months after hire Pass a Ryder Drug Test Pass a DOT physical Pass a Ryder road test Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities SBTIII trained within 180 days (SBT220) Complete all OEM on-line diagnostic scan tool software courses as required by location fleet mix. (completed within 365days) Complete Instructor led OEM courses as required to support location fleet mix. Performs vehicle maintenance and repair duties including: Performs standard vehicle maintenance Performs preventive maintenance Performs complex repairs with minimal (if any) support. Demonstrate the ability to access and use internal and external maintenance documents Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable. Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns. Performs facility maintenance duties Interacts with customers/drivers to properly determine nature of complaint once assigned a task. Instructs and advises other technicians regarding maintenance repair procedures and diagnostics Coaches/Mentors other level technicians Advise shop management and other technicians on shop repairs Utilizes key functions of Shop Management System and electronic documentation available Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT) Other support duties as required to support operations. These could include but are not limited to Service Island support. Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 2 days ago (7/30/2025 7:05 AM) Requisition ID 2025-185340 Location (Posting Location) : State/Province IN Location (Posting Location) : City KENDALLVILLE Location (Posting Location) : Postal Code 46755 Category Technicians/Service Employees6 Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000068 Min Pay USD $34.00/Hr. Max Pay USD $34.00/Hr.

Looking for a Technical Business System Analyst in the Management Information Systems team (MIS) that would support and build enhancements within the ServiceNow platform, as well as any homegrown inventory, audit, and compliance portfolio to provide functional & technical support to internal business customers. This person will help understand functional requirements to provide lean and effective solutions using the appropriate technology stack in an agile manner. They will also support other teams in testing, implementation, and production support where needed while following all internal processes for development and operations. Key Responsibilities: Manage backlog, gather requirements, design, test & support various implementations, enhancements, and upgrades on the ServiceNow platform with minimal supervision. Actively participate and collaborate in a mature operational model and help enhance processes. Collaborate tasks with vendor technical support, other internal systems teams, and project development staff to ensure successful COTs/SaaS integration implementation within the enterprise Manages the ServiceNow/UCMDB/Flexera Discovery infrastructure, including schedules, credentials, mid-servers and patterns Help design, test, and support RESTful web services, Linux and scripting environments, integrations, database, and server development Support software and web architecture requirements analysis, testing and maintenance Leverage deep functional knowledge to independently design and develop smart and innovative solutions to satisfy business requirements Develop deep understanding of tie-ins with other systems and platforms within the corporate systems landscape Ensure key documentation is completed to a high standard and present technical information to senior management in a concise manner Hands-on ability to build quick prototypes/visuals to assist with high level product concepts and epic stories Write and maintain strong unit, functional and integration tests ready to be automated in a continuous integration environment Active participation in evolving our application platform to meet scaling, security, and compliance need Required Qualifications: 5+ years of hands-on experience working with multiple ServiceNow modules like ITSM, Change-Incident-Problem Management, Asset Management, CMDB, Release Management, GRC, or Vendor Risk Management. Experience in working on RESTful web services, Linux and scripting platforms and technical audit platforms is preferred Experience in Software Asset Management (SAM) / IT Asset Management (ITAM) domain for both on-prem and SaaS software platform, USU, SNOW License Manager or Client Asset Manager Excellent analytical, problem-solving skills with clear and concise communication - verbal and written Minimum of 8 years of related experience with a bachelor's degree in computer science (or equivalent work experience); or 6+ years and a master's degree in computer science (or equivalent work experience) Nice to have: Certifications in ServiceNow administration is preferred Software Asset Management (SAM) certification is a plus Advanced Microsoft Excel, PowerPoint knowledge is a plus Exposure to collaboration tools such as SharePoint, Confluence and Jira Able to perform the complete system life cycle using Agile Engineering and Agile Scrum Methodology preferably in JIRA Familiar with VMware, AIX, KVM virtualization and Docker, Kubernetes app virtualization Strong Linux, OS skills & Web UI experience as an analysis

Role: Datacenter Technician Datacenter Windows / H&F Engineer, working in 24X7 environment in rotating shifts Mandatory Hands & Feets Skills Accountable for 24*7 support for overall Infra/ Datacenter (Servers, Racks) Operations. 100% hands-on datacenter management (servers, racks, cabling), Hardware Servers, Storage, Backup, Tape library experience, handling new / break fix and decommission. 3-7 years of experience in managing datacenters operations of a large and complex customer. Experience in Capacity planning for Rack space, power, DC modular containment, necessary tools and services. Flexible, continuous learner, excellent communicator, works well in team environment, appreciates challenge, comfortable and effective working in new areas that require experimentation and rapid problem solving. Requires excellent inter-personal, communication and presentation skills. Emergency communication system support including working with 3rd parties Hands-on experience in managing 24x7 global datacenter operations/DR Operation Handling Incidents / Service Request and adhering to contractual SLAs. As part of Smart Hands Services, Service Provider shall perform the following activities, and any other activities, as requested by State Street (e.g., power cycle devices, cable route/path tracing, manage spares inventory, receive and dispatch goods, etc.): Perform visual inspection of third-party equipment such as carrier or provider network equipment; Provide fault isolation and break/fix activities for the in scope data center equipment (servers, backup, storage) and network devices (including network sniffer, vulnerability scanners and security sensors); Direct third-party vendors who may be involved in diagnosing and correcting system related issues and assisting with solutions; Coordinate maintenance and outages with local and remote vendors; Rack, stack, install and decommission equipment and assets as requested; Perform all network cable and jack testing; Perform all cable patching as required; Provide after-hours support (during critical change activities) for critical network upgrades and maintenance; Perform end-to-end network patching; Participate in DR testing as requested by State Street; Provide timely communication on issue status and resolution, at intervals and timings as prescribed by State Street, which may vary by issue severity and platforms impacted as determined in State Street's sole discretion; Maintain ticket updates for all reported Incidents; Use diagnostic tools to troubleshoot problems associated with network connectivity; and Receiving New Equipment, Physical verification of shipment,Enter receipt into Order tool,Record discrepancies (if any),Storage of items received into cage or warehouse, Disposition of items received, Submit for Verification / Verify, Submit for Completion, Record assets in tool, Cage Management ,Moving Assets in/out of Secured Cages or Warehouse, Manual Virtual Cage Log Sheet Procedure, Barcode management & Tagging Assets, Asset Tag placement, Asset Transfer / Movement, Asset Shipping / Disposal, Shipping , Return of Leased Assets, Scrapping/Disposal of serialized assets & Other tasks agreed to by the provider and State Street Tower Manager Soft Skills

at Whaley Foodservice ***HIRING IMMEDIATELY!!!**** ***Sign On Bonus Available for Qualified Service Technicians*** Whaley Foodservice, LLC is one of the largest commercial kitchen equipment repair service companies in the Southeast comprised of over 600 employees located across 31 geographically dispersed locations.Visit "Whaley Careers" to find your place to grow. ********************************* Pay Rate: $31.00-39.00/hour* At Whaley we know people are vital to our success. We offer a competitive salary, on-call pay, and generous benefits including Sign-On Bonuses for Experienced Technicians Company Vehicle | Mobile Device | Uniforms Meters & Test Equipment Industry Certification 401k & Profit Sharing Paid Holidays & Vacation Medical & Dental Benefits Short-Term Disability | Long-Term Disability Insurance (company paid) Life Insurance (company paid) To learn more about current opportunities, visit Whaley Careers: ********************************* Summary: The Service Technician II provides maintenance, service, and repair for commercial cooking equipment and commercial refrigeration i.e. grills, fryers, ovens, ice machines, reach-in and walk-in coolers, freezers, etc. Details: Diagnoses, troubleshoots, and repairs commercial cooking kitchen equipment, refrigeration. Communicates status updates for part order(s) and repairs with branch support and customer. Completes service calls accurately and timely. Audits truck stock to ensure required parts are stocked. Ensures service vehicle, tools, and uniforms are consistent with Whaley standards of safety. Meets on-call requirements. Required Education | Experience Three years of experience in commercial kitchen repair and or refrigeration. Must be 18 years of age. Completion of a satisfactory background check and drug screen is required. Valid Driver's license and driving record that aligns with our safety standard. Skills and Abilities Ability to work independently Ability to accurately diagnose and troubleshoot: an automotive, electrical, installation, and mechanical background is a plus. Journeyman License and or CFESA certification not required but would be a plus. Strong attention to detail. Excellent communication and soft skills. Good driving record Whaley Foodservice is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Applicants must have an Active Top Secret/SCI US Government clearance. Note: US Citizenship is required to maintain a Top Secret/SCI clearance. The contractor will be responsible for the proper repair and maintenance for a large fleet of forklifts and related equipment of various brands (predominately Raymond). The forklift fleet consists of a variety of electric, gas-, and diesel-powered units designed for interior and exterior building use. The contractor shall be responsible for maintaining a comprehensive maintenance schedule, obtaining approval for the schedule from appropriate government focal points, and adhering to the schedule in order to ensure all forklift units are mechanically ready for use and safe to operate. The contractor shall manage a spare parts inventory and make all levels of repairs when necessary. The contractor will also be responsible for repairing and maintaining pallet jacks and carts. Duties/Tasks and Responsibilities Schedules, prioritizes, inspects, and repairs forklifts, pallet jacks, and carts Determines, within prescribed value range, when a major component/ assembly is to be repaired, rebuilt, replaced or discarded Responsible for assisting with the purchasing of parts and services Required to maintain fleet and training vehicles; and prepares written estimates on cost and labor time for corrective repairs. Interacts with customers to keep them informed of status of vehicles, repairs needed, etc. Based on assignment, independently performs corrective maintenance and repairs to the fleet. Informs government focal point if a task cannot be safely performed alone. Inspects, diagnoses and isolates vehicle and equipment malfunctions; troubleshoots, traces and locates defects and/or causes of mechanical problems to determine type and extent of necessary repairs. Repairs all assigned forklifts and equipment to ensure they are safe and dependable. Inspects and tests equipment for mechanical defects, and replaces worn parts. Removes, replaces, adjusts, or cleans defective parts or components Perform oil changes, check fluids, diagnose tread wear, charge and repair batteries and trouble-shoot problems. Inspects/replaces hydraulic lines/hoses as needed. Ensure braking and electrical systems are optimal. Utilizes appropriate techniques and procedures in accordance with manufacturer's specification Identifies necessary parts, equipment and supplies needed to complete repair or preventative check. Road tests vehicles during and occasionally upon completion of maintenance/repair work. Responds to emails and telephone calls. Performs other related duties as required or as directed by Supervisor regarding forklift and equipment maintenance. Knowledge, Skills, and Abilities Extensive knowledge of the operating systems used in forklifts and associated hydraulic, pneumatic, and electrical systems. Extensive knowledge of the practices and tools used in the maintenance and diagnostics of forklifts and equipment. Considerable knowledge of computer, electrical, transistorized and other non-mechanical systems and how they tie-in with and affect the operation of mechanical systems. Considerable knowledge of the full range of tools, equipment, test procedures and practices used in the repair and preventative maintenance of forklifts. Excellent interpersonal and customer service skills. Experience diagnosing complex mechanical and related malfunctions. Expertise in reading technical manuals, references and specifications and service and recall bulletins. Written communication skills necessary to write routine correspondences, maintenance logs and order forms. Expertise in how to operate a forklift, power tools, wrenches, diagnostic equipment, and jacks. Working knowledge of computers, including Microsoft Access and Microsoft Office Suite. Adaptability to prioritize and schedule multiple work requirements. Flexibility in work schedule. Representational skills necessary to interact with outside vendors. Working knowledge of diesel, gas, and electric mechanics. Experience welding simple parts. Work Environment The work is usually performed inside on concrete surfaces where there is exposure to drafts, noise, and fumes from vehicles. Forklift technician - Senior occasionally perform work outside under adverse weather conditions. They are continually exposed to dirt, dust, and grease, and to the potential for burns, chemical irritations, shocks, bruises, cuts, and strains. To reduce dangers and irritations from these conditions, they follow prescribed safety practices and use safety equipment such as safety shoes and glasses, and respirators. Tools used in this occupation: Hand and power tools Scanners Modular diagnostic information systems Welding equipment Lifts Minimum Qualifications Active TS/SCI Clearance Experience: Ten (10) years of experience in the problem diagnosis, repair and maintenance of a wide variety of forklift maintenance. Education: High school Diploma or GED equivalent. Special Certifications: Certified in the safe operation of forklifts by the Sponsor within 30-days of commencing work and every 24-months as required. Certified maintenance on Raymond brand forklifts. Other pertinent forklift maintenance certifications. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Achieving our goals starts with supporting yours. Grow your career, access top-tier health and wellness benefits, build lasting connections with your team and our customers, and travel the world using our extensive route network. Come join us to create what's next. Let's define tomorrow, together. Description At United, we have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they're well taken care of and ready to get our customers to their desired destinations. If you're ready to work on our planes, join our Tech Ops experts and help keep our fleet in tip-top shape. The sign-on bonus is exclusively for external candidates, internal applicants are not eligible to receive the sign-on incentive. Key Responsibilities: Requires a thorough knowledge of general building maintenance with emphasis on electrical solving, including AC & DC circuits, high voltage (480), high amperage and some 400 cycle equipment Requires experience in industrial wiring and the ability to read and follow wiring schematics and work without supervision Journeyman electrical license a plus Requires the ability to make low and high voltage repairs to all building electrical equipment This includes solving, installation and repair of 110/220/480 volt single and multiphase electrical circuitry and devices You should also have some experience in related building equipment and trades, such as air handling units, plumbing and steam fitting, fire systems and conveyors Facilities Technicians must be able to work around the clock shifts, including weekends and holidays, in the outdoors in all weather conditions Schedules are bid and awarded according to seniority Facilities Technicians are represented by the International Brotherhood of Teamsters (IBT) Salary increases will be administered according to the current IBT/United contract New employees are required to join the union within ninety (90) days of employment There is an initiation fee for joining the union and subsequent monthly union dues which are set by the Local Lodge Qualifications United values diverse experiences, perspectives, and we encourage everyone who meets the minimum qualifications to apply. While having the "desired" qualifications make for a stronger candidate, we encourage applicants who may not feel they check ALL of those boxes! We are always looking for individuals who will bring something new to the table! What's needed to succeed: Twenty Four months experience required in at least three of the following areas: Electrical (including 480 volt, 3 phase) Structural (including steel frame construction) HVAC (including building management systems) Mechanical (including conveyors) Plumbing PLC electronic/computer controls Must have completed high school diploma, GED or equivalent Ability to maintain and repair all building disciplines, heavy mechanical and welding Work may be indoors or outside or in elevated areas anywhere on airport Must be able to climb and work from ladders, and/or walk for extended periods Moderate lifting Must possess sufficient tooling to perform required tasks Computer experience for input and retrieval of data Qualified candidates must be immediately available for full time employment Must possess a valid, clean, applicable state driver's license What will help you propel from the pack: Electronics diagnostics and troubleshooting United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact to request accommodation. The starting rate for this role is $34.52. This is also a bonus eligible position (i.e. profit sharing). We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement). United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. Equal Opportunity Employer - Minorities/Women/Veterans/Disabled/LGBT. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact to request accommodation.

Job Title: Data Center Technician Structure: Contract-to-Hire (6 months) Pay: 22/hr We are seeking a hands-on Data Center Technician with strong mechanical aptitude and foundational hardware knowledge to support break/fix operations within a fast-paced environment. This role is ideal for someone who is passionate about computer hardware, learns quickly, and can work independently while earning trust from the broader team. You will be responsible for diagnosing and resolving hardware-related issues, correcting ticketing errors, and ensuring accurate documentation of steps taken. This position offers the opportunity to grow into a full-time role for strong performers. Key Responsibilities Perform regular break/fix work on servers and related data center hardware. Troubleshoot and resolve hardware failures, ticketing errors, and incomplete or missing information. Conduct basic technical testing, including ISO/isolation testing and hardware diagnostics. Ensure all work is appropriately logged and follows established processes. Work independently while communicating effectively with the broader operations team. Follow safety standards, internal procedures, and data center best practices. Preferred Background: Strong hands-on experience with computer hardware-Geek Squad, PC building, or similar backgrounds strongly encouraged. Solid baseline understanding of computer components, system assembly, and technical fundamentals. Ability to learn quickly, adapt to feedback, and work with minimal supervision. Strong judgment and reliability; earns trust rapidly. Comfortable receiving and responding to constructive feedback. Candidates newer to the data center world to bring fresh perspectives and adaptability. Qualifications 1-3+ years of hands-on hardware or mechanical experience (professional or personal). Experience with troubleshooting and basic hardware diagnostics. Familiarity with isolation testing and technical procedures is a plus. Strong communication and documentation skills. Ability to work in a physically active environment (lifting, standing, navigating data center aisles). Eight Eleven Group provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, national origin, age, sex, citizenship, disability, genetic information, gender, sexual orientation, gender identity, marital status, amnesty or status as a covered veteran in accordance with applicable federal, state, and local laws.

* HIRING IMMEDIATELY!!! * Sign On Bonus Available for Qualified Service Technicians* Whaley Foodservice, LLC is one of the largest commercial kitchen equipment repair service companies in the Southeast comprised of over 600 employees located across 31 geographically dispersed locations. Visit "Whaley Careers" to find your place to grow. ********************************* Pay Rate: $31.00-39.00/hour* At Whaley we know people are vital to our success. We offer a competitive salary, on-call pay, and generous benefits including * Sign-On Bonuses for Experienced Technicians * Company Vehicle | Mobile Device | Uniforms * Meters & Test Equipment * Industry Certification * 401k & Profit Sharing * Paid Holidays & Vacation * Medical & Dental Benefits * Short-Term Disability | Long-Term Disability Insurance (company paid) * Life Insurance (company paid) * Enjoy the benefits of our Town Shares Program - share in our company's success! To learn more about current opportunities, visit Whaley Careers: ********************************* Summary: The Service Technician II provides maintenance, service, and repair for commercial cooking equipment and commercial refrigeration i.e. grills, fryers, ovens, ice machines, reach-in and walk-in coolers, freezers, etc. Details: * Diagnoses, troubleshoots, and repairs commercial cooking kitchen equipment, refrigeration. * Communicates status updates for part order(s) and repairs with branch support and customer. * Completes service calls accurately and timely. * Audits truck stock to ensure required parts are stocked. * Ensures service vehicle, tools, and uniforms are consistent with Whaley standards of safety. * Meets on-call requirements. Required Education | Experience * Three years of experience in commercial kitchen repair and or refrigeration. * Must be 18 years of age. * Completion of a satisfactory background check and drug screen is required. * Valid Driver's license and driving record that aligns with our safety standard. Skills and Abilities * Ability to work independently * Ability to accurately diagnose and troubleshoot: an automotive, electrical, installation, and mechanical background is a plus. * Journeyman License and or CFESA certification not required but would be a plus. * Strong attention to detail. * Excellent communication and soft skills. * Good driving record Whaley Foodservice is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

**Applicants must have an Active Top Secret/SCI US Government clearance with polygraph. Note: US Citizenship is required to maintain a Top Secret/SCI clearance with polygraph.** The contractor will be responsible for the proper repair and maintenance for a large fleet of forklifts and related equipment of various brands (predominately Raymond). The forklift fleet consists of a variety of electric, gas-, and diesel-powered units designed for interior and exterior building use. The contractor shall be responsible for maintaining a comprehensive maintenance schedule, obtaining approval for the schedule from appropriate government focal points, and adhering to the schedule in order to ensure all forklift units are mechanically ready for use and safe to operate. The contractor shall manage a spare parts inventory and make all levels of repairs when necessary. The contractor will also be responsible for repairing and maintaining pallet jacks and carts. **Duties/Tasks and Responsibilities** + Schedules, prioritizes, inspects, and repairs forklifts, pallet jacks, and carts + Determines, within prescribed value range, when a major component/ assembly is to be repaired, rebuilt, replaced or discarded + Responsible for assisting with the purchasing of parts and services + Required to maintain fleet and training vehicles; and prepares written estimates on cost and labor time for corrective repairs. + Interacts with customers to keep them informed of status of vehicles, repairs needed, etc. + Based on assignment, independently performs corrective maintenance and repairs to the fleet. Informs government focal point if a task cannot be safely performed alone. + Inspects, diagnoses and isolates vehicle and equipment malfunctions; troubleshoots, traces and locates defects and/or causes of mechanical problems to determine type and extent of necessary repairs. + Repairs all assigned forklifts and equipment to ensure they are safe and dependable. + Inspects and tests equipment for mechanical defects, and replaces worn parts. + Removes, replaces, adjusts, or cleans defective parts or components + Perform oil changes, check fluids, diagnose tread wear, charge and repair batteries and trouble-shoot problems. + Inspects/replaces hydraulic lines/hoses as needed. + Ensure braking and electrical systems are optimal. + Utilizes appropriate techniques and procedures in accordance with manufacturer's specification + Identifies necessary parts, equipment and supplies needed to complete repair or preventative check. + Road tests vehicles during and occasionally upon completion of maintenance/repair work. + Responds to emails and telephone calls. + Performs other related duties as required or as directed by Supervisor regarding forklift and equipment maintenance. **Knowledge, Skills, and Abilities** + Extensive knowledge of the operating systems used in forklifts and associated hydraulic, pneumatic, and electrical systems. + Extensive knowledge of the practices and tools used in the maintenance and diagnostics of forklifts and equipment. + Considerable knowledge of computer, electrical, transistorized and other non-mechanical systems and how they tie-in with and affect the operation of mechanical systems. + Considerable knowledge of the full range of tools, equipment, test procedures and practices used in the repair and preventative maintenance of forklifts. + Excellent interpersonal and customer service skills. + Experience diagnosing complex mechanical and related malfunctions. + Expertise in reading technical manuals, references and specifications and service and recall bulletins. + Written communication skills necessary to write routine correspondences, maintenance logs and order forms. + Expertise in how to operate a forklift, power tools, wrenches, diagnostic equipment, and jacks. + Working knowledge of computers, including Microsoft Access and Microsoft Office Suite. + Adaptability to prioritize and schedule multiple work requirements. + Flexibility in work schedule. + Representational skills necessary to interact with outside vendors. + Working knowledge of diesel, gas, and electric mechanics. + Experience welding simple parts. **Work Environment** The work is usually performed inside on concrete surfaces where there is exposure to drafts, noise, and fumes from vehicles. Forklift technician - Senior occasionally perform work outside under adverse weather conditions. They are continually exposed to dirt, dust, and grease, and to the potential for burns, chemical irritations, shocks, bruises, cuts, and strains. To reduce dangers and irritations from these conditions, they follow prescribed safety practices and use safety equipment such as safety shoes and glasses, and respirators. Tools used in this occupation: + Hand and power tools + Scanners + Modular diagnostic information systems + Welding equipment + Lifts **Minimum Qualifications** Active TS/SCI Clearance with Polygraph Experience: Ten (10) years of experience in the problem diagnosis, repair and maintenance of a wide variety of forklift maintenance. Education: High school Diploma or GED equivalent. Special Certifications: + Certified in the safe operation of forklifts by the Sponsor within 30-days of commencing work and every 24-months as required. + Certified maintenance on Raymond brand forklifts. + Other pertinent forklift maintenance certifications. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

Achieving our goals starts with supporting yours. Grow your career, access top-tier health and wellness benefits, build lasting connections with your team and our customers, and travel the world using our extensive route network. Come join us to create what's next. Let's define tomorrow, together. Description At United, we have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they're well taken care of and ready to get our customers to their desired destinations. If you're ready to work on our communications equipment, join our Tech Ops experts and help keep our ground communications systems in tip-top shape. Key Responsibilities: As an Airport Communications Technician you will work in a fast-paced Washington-Dulles location. The Airport Communications Technician plays a very significant role in providing quality service to our internal customers and will be assigned to service two-way radio communication, dispatch console, and wireless headset used by ground service agents. The Technician should have detailed knowledge of installing and maintaining land mobile radio, air to ground radio, and equipment used support them including: * Systems and component level service and configuration of radio transmitter, receiver, antenna, transmission line, trunked radio systems, and related RF tuned equipment. * IP networked and analog consoles, control equipment, and related apparatus. * Apply analog and digital electronic fundamentals as they apply to land mobile radio and networked radio technologies. Technicians work around the clock shifts, including weekends and holidays, in the outdoors in all weather conditions. Schedules are bid and awarded according to seniority. This role is represented by the International Brotherhood of Teamsters (IBT). Salary increases will be coordinated according to the current IBT/United contract. Shift differentials of $.51 $.58 cents per hour for working an afternoon or evening shift respectively are paid in addition to the hourly rate. New employees are required to join the union within ninety (90) days of employment. There is an initiation fee for joining the union and subsequent monthly union dues. Qualifications What's needed to succeed (Minimum Qualifications): * Must have a valid FCC General Radiotelephone Operator License (GROL), Elements 1 and 3. * Must have (12) Twelve months component level repair and overhaul of UHF/VHF transceiver systems or comparable education or similar experience. * Knowledge of electrical circuits preferable for communications equipment. * Must be at least 18 years of age * Must be legally authorized to work in the United States without sponsorship * Must have computer and networking skills (Experience working with networks preferred) * Must have excellent organizational skills * Good verbal and written communication skills * Acceptable driving record required * Must be able to bend, reach, stoop, push, and pull. Mobility requirements including lifting, carrying, crawling, and ladder climbing * Customer focused * Successful completion of interview required to meet job qualifications * * What will help you propel from the pack (Preferred Qualifications): * Bachelor's degree in electrical/electronic engineering technology preferred. * Associate degree in electronic technology with 2-years related experience minimum. * Experience in a related field may be substituted for education. The starting rate for this role is $36.27. This is also a bonus eligible position (i.e. profit sharing). We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement). United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. Equal Opportunity Employer - Minorities/Women/Veterans/Disabled/LGBT. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact JobAccommodations@united.com to request accommodation.