Technician jobs in Norton Shores, MI - 829 jobs

This position will report to the Service Manager. The responsibilities of the Service Technician are to service, maintain, troubleshoot, and repair heating, ventilation, air conditioning, refrigeration systems and equipment. Diagnosing malfunctions and determining repair needs, inspecting, and performing tests on systems and equipment for defective parts and to assure proper functioning. Essential Job Function Customer Service Always present a professional positive and helpful attitude when interacting with customers and co-workers. Exhibit an understanding of Human Relations and functions as a “team player”. This position has frequent contact with customers, requiring reasonable tact and strong verbal/written communication skills. Observe additional maintenance needs requiring attention and report to the appropriate people. Basic Functions/Requirements Read and write English. Write legibly. Read a tape measure, perform basic math skills: (Add, Subtract, Fractions, Calculate sales tax) Must have valid Michigan drivers' licenses, good driving record (our insurance must accept you) Paperwork filled out properly daily, including electronic documentation, if applicable. Follow verbal and written instructions. Follow all safety rules. Be able to wear all P.P.E's when applicable (steel toe boots, gloves, safety glasses, hard hat, etc.) Lift, climb, bend, and kneel to complete assigned tasks. Tolerate working at heights off a ladder, scaffold, and aerial lifts. Perform heavy physical labor during adverse weather conditions. Work in confined spaces, exposed to fumes, chemicals, grease, acids, oil and in the vicinity of noise and vibration with proper P.P.E's. Maintain cooperative and effective working relationship with others. Be able to take “on call” in the regular rotation. Be available to work any time of the day to take care of your customer. (Before 8:00 am and after 5:00 pm during the week, any time weekends, and holidays) 4 hours safety training required annually. Must have refrigerant transition and recovery certification card. Continuing education is expected. Education/Experience High school diploma or GED preferred. 10+ Years' experience preferred. Work Coordination and Paperwork Coordinate start and stop time with Service Dispatcher for each call. Organize all work detail (work performed, service recommendations, etc.) and complete an accurate work ticket, paper or electronic, for billing and payroll purposes. Submit all paperwork to the office each Monday before 10:00 AM or at end of each month is required. Obtain record on work ticket and communicate to vendor an appropriate purchase order number when purchasing job-related parts and supplies. Physical Requirements Climbing (ladders, stairs, etc.) while carrying tools and parts Lift 50 lbs. frequently, 100 lbs. occasionally, and 100+ lbs. with assistance Bending or stooping Extended periods of walking Regular exposure to weather conditions Operating a motor vehicle Owning and operating power or hand tools Exposure to potentially harmful chemicals or materials with proper P.P.D's Non-Essential duties and responsibilities Performs other duties as assigned by Management.

Job Posting Start Date 11-19-2025 Job Posting End DateFlex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary General Purpose: Supports automation engineering services activities such as hardware and software design and development (non-production). Principle Accountabilities: · Maintain continuous system operation by adjusting, repairing, replacing, or modifying automation/robotic system components · Troubleshoot electrical, mechanical, pneumatic and hydraulic systems and components and return to serviceability · Perform scheduled preventive maintenance actions on all subsystems and related components · Ensure preventative maintenance of robotic and process support equipment are completed on a regularly scheduled basis. · Understanding of PLCs · Read and interpret electrical schematics, mechanical diagrams including complex automated system drawings. · Analyzes engineering test results, and implements changes to resolve problems. · Collaborate with the automation team in the qualification process of automated systems. · Records procedures and results, numerical and graphical data, and recommendations for changes in product or method. · Maintains software, documentation and equipment to the latest revision or operational specifications. · Assists engineers in developing and designing hardware and software required for all automation solutions per specifications. · Trains other technicians and operators on products, processes and equipment. · Proper use of power tools and measuring equipment · Strong awareness of safety SPECIALIZED JOB RESPONSIBILITIES may be required for certain positions. These could include one or more of the following duties: · Assists with customer presentations and interfaces with customers. · Assists engineers with outside third party automation developments · Organizes documentation (specifications, schematics, and procedures) What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryProduction Engineering Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

This will start as a temporary part time position. The Cable Technician I is responsible for performing basic low-voltage cabling work and providing on-site technical support for end users. This role supports daily IT operations, including troubleshooting workstation issues, installing and maintaining cabling infrastructure, and ensuring reliable connectivity at customer or internal locations. The ideal candidate is detail-oriented, customer-focused, and comfortable working in a fast-paced environment. Responsibilities - Install, terminate, and test Cat5e/Cat6 network cabling following industry standards. - Perform cable routing, dressing, labeling, and documentation. - Assist with installation of racks, patch panels, faceplates, and related hardware. - Troubleshoot connectivity issues related to cabling infrastructure. - Follow safety protocols and maintain a clean work environment on job sites. - Provide hands-on technical support for desktops, laptops, printers, mobile devices, and peripherals. - Perform troubleshooting for hardware, software, and network connectivity issues. - Assist with workstation setup, imaging, upgrades, and deployments. - Support user account setup, password resets, and basic application support. - Document work performed in ticketing systems and escalate issues as needed. - Provide excellent customer service to end users, both onsite and remotely. Work Environment Combination of office, industrial, and customer site settings. Role may require travel between sites and flexible hours based on project needs. #EES25 Requirements Qualifications - 1+ years of experience in cabling, IT support, or a related technical role. - Basic understanding of network cabling standards (TIA/EIA). - Familiarity with Windows OS, basic networking, and common IT troubleshooting steps. - Ability to use cabling and hand tools (punch-down tools, testers, drills, etc.). - Strong communication and customer service skills. - Ability to lift up to 50 lbs and work in various environments. - Valid driver's license may be required depending on job site needs. Preferred Skills - Experience with ticketing systems - Basic understanding of switches, access points, and network equipment. - Certifications such as CompTIA A+, Network+, or entry-level cabling certificates. Required tools: 8-10ft ladder RJ 45 Crimp tool Smart phone Flash light - not the one on the phone Fish Tape / Glow Rods Cordless drill Ethernet cable tester that displays output of all 8 pins simultaneous Cable toner Salary Description $28.00 - $32.00/hr

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military

Based out of Granbury, Texas, BC Tech Pro partners with techs all over the country to complete on-site hardware warranty services in their territories. If you love working on computers and want to get out from behind a desk, come work with us! Job Description This is a Computer Field Technician Position doing hardware repairs and installations on laptop and desktop units. To be successful in this position, you must have prior experience with laptop and desktop hardware. Job Details: This is a 1099/per call position Pay is based solely on the number of calls completed. Calls start at $35 and go up based on distance traveled Pay period: Every Friday after the first week worked Tickets are run Monday-Friday during the day shift. Candidates must be regularly available a minimum of 3 weekdays to be considered. Call volume is variable but is usually 2-5 calls per day You will complete certifications from Dell and Lenovo as part of your onboarding. Certifications are online and free to you. You must have a reliable form of transportation and a valid driver's license to run these calls. You will be visiting multiple work sites throughout your day. You must have access to a computer and the Internet to log onto your portal each day. You must be available to log into your tech portal each morning you are working by 9 am to code your calls and map out your route for the day. The manufacturer has completed troubleshooting and shipped a part prior to your ticket being issued to you. You will confirm service times with the customer in your tech portal. Services will be completed at the customer site (residential and commercial) You will pick up parts daily from the assigned Fed Ex or UPS store for your territory before going onsite. Once all calls are completed for the day drop off the old parts with the pre-paid label that is provided. Qualifications Must have prior hands on experience with replacing components on laptops and desktops Must have a valid driver's license and reliable transportation Must be comfortable with daily local travel Additional Information All your information will be kept confidential according to EEO guidelines.

Ascent, now part of Wesco, is a leading provider of mission-critical facility solutions across North America. With deep expertise in data center development, engineering, and operations, Ascent supports thousands of sites for top-tier clients, delivering reliable performance and innovative technology. As part of the Wesco family, Ascent continues to set the standard for safety, service, and operational excellence in the critical infrastructure sector. The Data Center IT Technician is responsible for installing, testing, and maintaining a wide range of network and IT infrastructure within a data center environment. This includes fiber, coax, and copper cabling, as well as racking and configuring servers, switches, routers, and power distribution units. The Data Center IT Technician performs advanced troubleshooting, circuit testing, and custom installations while ensuring adherence to quality standards and customer requirements. This role requires strong technical skills, attention to detail, and the ability to manage priorities in a fast-paced, mission-critical setting. Responsibilities Run fiber and coax cross connects and follows proper termination techniques per company established processes and procedures. Perform Installs/Tests/Modifies Cross Connects and ensures proper dressing of the following: coax cross connects (repeater), fiber cross connects (Unicam termination), twisted pair copper cross connects, intra-building cross connects, 66 block/110 block terminations. Deploy cabinet rack mount PDU's. Install cable management systems to include wire managers and patch panels. Rack and stack customer equipment. Install and test cross connect circuits (switched, multiplexed, T1, DS3, OC3-48, Eth, GigE, 10Gig etc.). Conduct carrier circuit maintenance. Troubleshoot switched / multiplexed / media converted circuits; escalates to, and works with Networking Group, as needed. Install circuits requiring advanced fiber terminations. Conduct carrier circuit testing. Work with IT Lead or customer to troubleshoot issues. May require console to device and perform basic config (DRAC, iLO). Maintain detailed written records of all work activity. Escalate SRs that require additional information. Determine work priorities from the ticketing queue and ensures adherence to all commit times. May perform other duties as assigned. Qualifications High school degree or equivalent. 2+ years of related work experience with server builds in a production data center environment. Ability to lift up to 50 lbs throughout the day. Ability to read installation drawings (Visio drawings/spreadsheets). Knowledge of cable limitations to daily work (distance limitations, etc.). Basic understanding of Unix / Windows booting process, commands, and system command language. Ability to troubleshoot switched / multiplexed / Media converted cross connects and intra-building cross connects. Experience with troubleshooting all circuits with carriers. Ability to work days/nights/weekends/holidays, if needed and/or required. Strong communication skills. Proficient in MS Office and Outlook preferred. One or more of the following certifications preferred: Fluke CCTT Copper, Fluke CCTT Fiber, JDSU BERT Testing, Digital Lightwave Testing. BICSI Level II Copper, BICSI Level II Fiber, FOA - CFOT, Comp-TIA A, Comp TIA Network+. The data center work environment is a highly secure, physically demanding, and structured operation, characterized by its loud, controlled temperature conditions and 24/7/365 uptime. The environment demands a high attention to detail and strong problem-solving skills to manage and troubleshoot critical equipment during regular operation and in emergency situations. Lifting up to 50 lbs, regular bending, stooping, climbing and long periods of walking / standing will be required.

Job Title: Forklift Technician Reporting to the Maintenance Manager, the Forklift Technician is responsible for the maintenance, diagnosis, and repair of a variety of material handling equipment, including forklifts, scissor lifts, and boom lifts. This role is essential to ensuring the safe, reliable, and efficient operation of equipment used in daily warehouse and industrial operations. Responsibility: Perform scheduled preventive maintenance on forklifts (electric, diesel, propane), scissor lifts, and boom lifts. Diagnose mechanical, electrical, and hydraulic issues and perform timely repairs. Inspect equipment to ensure safety and operational efficiency in compliance with OSHA and company standards. Maintain accurate records of maintenance and repairs performed using maintenance logs. Respond to breakdowns promptly and effectively to minimize downtime. Conduct safety checks and troubleshooting lift systems, motors, hydraulics, and control systems. Replace or repair faulty parts such as motors, hydraulic cylinders, hoses, sensors, and batteries. Coordinate with vendors and order parts when necessary. Maintain a clean, organized, and safe work area. Assist with general facility maintenance as needed. Other duties as assigned. Academic/Educational Requirements: High school diploma or GED required; technical or vocational training preferred. 5+ years of experience in forklift and aerial equipment maintenance and repair. Proven knowledge of electrical, hydraulic, and mechanical systems. Experience working with scissor lifts and boom lifts (Skyjack or similar brands). Required Skills/Experience: Ability to read and interpret technical manuals, schematics, and diagrams. Strong diagnostic and problem-solving skills. Must be team-oriented, able to problem-solve and troubleshoot. Self-motivated. Demonstrated ability to work in a team environment. Demonstrated commitment to safe working behaviors including lockout, fall protection, confined space, and mobile equipment operation. Demonstrated good housekeeping practices and 5S principles. What Linamar Has to Offer Competitive Compensation Employee Benefits package includes but is not limited to, Drug, Dental & Vision etc. 401k Program Opportunities for career advancement. Sustainability Council Community based outreach supporting both local and global initiatives and charities. Discounts for local vendors and events, including auto supplier discounts. About Us: Linamar Corporation is a Canadian-founded global manufacturer, renowned for its advanced engineering and innovative product development across diverse industries and markets. Our journey started in 1966 under the visionary leadership of our founder, and today, we remain committed to cultivating a culture of innovation and collaboration. With access to state-of-the-art tools and resources, you'll have the opportunity to make a meaningful impact alongside a team of driven and passionate professionals. Join us and be part of a company where innovation, collaboration, and growth are at the heart of everything we do. Linamar Corporation is an equal opportunity employer and encourages diversity in the workplace without regard to any basis protected by applicable federal, state, or local law. Linamar Corporation encourages applications from all qualified individuals and will reasonably accommodate applicants throughout all stages of the recruitment and selection process upon request.

US Citizen or Permanent Resident In-Person Starts Immediately 45-75K Base+ Options and Incentives Join us in reindustrializing the Midwest and turning autonomous aircraft into on-demand infrastructure. Orb is a small mission-driven team where your initiative, creativity, and dedication will be used to reach every village on the planet with power, logistics, and communications. Your Role at Orb:Orb is building a rapidly deployable, on demand communications capability that's interoperable with autonomous platforms, sensors, and across agency lines. Orb Autonomous Resilient Communications provides Resilient Communications for every vehicle, vessel, aircraft, and facility. This global network will be the foundation for Orb aircraft and anyone else who needs resilience and interoperability.Key Responsibilities Product Technician: Assembly, Integration, Sales, Training, and Support of ARC Edge Products and Orb autonomous aircraft. Field Operator: Capture Operational Limitations and Direct Hardware/Software Improvements during training, demonstration, and deployment Integration Support: Support integration and interoperability between legacy C2 Networks and emerging Autonomous platforms & Sensors Partnership Support: Customer Service for ARC Edge products and interoperability with partner technologies to improve resilience, interoperability, and security of ARC Edge Desired Skills and Qualifications: Associate's degree or equivalent operational experience with IT, Tactical Communications: Fiber, Cellular 4G/5G/LTE, SDR MANET Radios, LEO/MEO Satellite Communications integration with autonomous systems in contested environments. Demonstrated history of operating and improving tactical level or platform integrated communications capability. IT support for CMMC Level 2, IATT, ATO, and Classified activities for DoW Strong Understanding of communications system integration, signature management, and network security associated with remote/autonomous platforms operating on DoW networks. Understanding and applying Software Defined Radio, Mesh, LPI/LPD/LPE, and SWaP concepts to accomplish missions in a contested environment. Strong analytical and problem-solving skills with the ability to manage multiple critical projects in a dynamic environment. Willingness to take on additional duties as required. Existing or prior DoW security clearance preferred. About Orb Aerospace: Orb was started with the mission to bring aviation to the 80% of the world that's never had it; turning autonomous aircraft into tools to decentralize infrastructure, connect continents, protect soldiers, provide for families, and run economies.“Less like the flying taxis, more like the flying cowboys,” Orb is at the intersection of manned and unmanned aviation, reindustrializing the Midwest, and building the- future we know is possible and want to live in. About Node One: Node One is a small team of engineers and operators who have dedicated their lives to solving some of the world's hardest problems through a new kind of aviation - Orb's live-work-fly R&D HQ. Node One is all about reducing the cycle time to design, build, and fly aircraft from years to months and building the systems and platforms we'll use to reach every village on the planet. We stand on the shoulders of giants. Their great work allows us to accomplish ours. If you've been a rocket/airplane nerd and have a passion for designing, building, and flying airframes, autopilots, power systems, and embedded systems, or you love to push a new product through new manufacturing methods to a new market, come join the team at Node One and make history. Orb Employees Are: High Agency and Biased Towards Action Have a History of Self-Starting, Pacing, and Finishing Projects Thrive with Autonomy to Design New Solutions to Partially Defined Problems Are Curious and Continue Learning Have Integrity and a Desire to Serve Others Standard Benefits Package: Orb provides a monthly flat rate towards medical, dental, and vision $500 flat rate for individuals; $850 flat rate for married/family Medical, Vision, Dental, Short/Long Term Disability, and Group/Voluntary Life Insurance Opt-In 401K Options (Pre-Tax or Roth) with a 3% Employer Match Perks: Support in Getting your Pilots License and Ratings Support for Continuing Education Annual Customer Demos all over the World

Technician Apprentice - Full Time Job Type: Full-Time Kool Toyota is seeking a motivated Technician Apprentice to join our Service Department. This is an entry-level, full-time position designed for individuals interested in starting a career as an automotive technician. The Technician Apprentice will work under the guidance of experienced technicians, learning diagnostic, maintenance, and repair skills while gaining hands-on experience in a fast-paced dealership environment. Essential Duties & Responsibilities Assist senior technicians with vehicle inspections, maintenance, and repairs Perform basic automotive services such as oil changes, tire rotations, and fluid checks Learn to use diagnostic tools and service equipment safely and correctly Maintain a clean, organized, and safe work area Follow dealership and manufacturer (Toyota) service procedures and guidelines Accurately document work performed and communicate effectively with the service team Attend training sessions and complete required manufacturer or in-house training Comply with all safety policies and procedures Qualifications & Requirements High school diploma or GED required Interest in automotive repair and a desire to pursue a career as an automotive technician Enrollment in or completion of an automotive technology program is a plus, but not required Basic mechanical knowledge and willingness to learn Valid driver's license with a clean driving record Ability to work in a fast-paced, team-oriented environment Strong work ethic, reliability, and attention to detail Ability to stand, bend, lift, and work on your feet for extended periods What We Offer Full-time position with consistent hours Hands-on training and mentorship from experienced technicians Opportunities for advancement into a Flat Rate or Certified Technician role Manufacturer (Toyota) training and certification opportunities Competitive pay based on experience Benefits package including medical, dental, vision, 401(k), paid time off, and employee discounts Career Path This role is intended as a career-building opportunity. Successful Technician Apprentices may advance into higher-level technician positions as skills, certifications, and experience are gained.

Job Purpose: - The Utility Technician at COASTAL CONTAINER CORPORATION is responsible for ensuring the efficient operation and maintenance of various utility systems within the manufacturing facility. This role is crucial in supporting the production process by maintaining equipment, ensuring safety standards, and contributing to the overall upkeep of the facility. Key Responsibilities: - Perform routine maintenance on utility systems, including the maintenance of balers and other essential equipment. - Conduct regular cleaning and preventive maintenance services (PMS) on machines to ensure optimal performance. - Execute tasks such as greasing and checking oil levels to maintain machinery efficiency. - Maintain compression filters to ensure clean and efficient operation. - Utilize welding and fabricating skills to repair and maintain equipment as needed. - Conduct safety checks to ensure all equipment and facility operations comply with safety regulations. - Assist in maintaining the overall upkeep of the facility, ensuring a safe and clean working environment. - Collaborate with team members to troubleshoot and resolve any technical issues that arise. - Adhere to company policies and procedures while maintaining a high standard of workmanship and safety. Qualifications Required Education: - High school diploma or equivalent. Required Experience: - Minimum of 2 years of experience in a similar role within a manufacturing environment. - Experience in maintaining utility systems and equipment, including balers and compression filters. Required Skills and Abilities: - Proficiency in welding and fabricating for maintenance and repair tasks. - Ability to perform routine maintenance tasks such as greasing, checking oil levels, and conducting safety checks. - Strong capability in cleaning and maintaining machines to ensure optimal operation. - Familiarity with preventive maintenance scheduling (PMS) to enhance equipment longevity and performance. - Excellent problem-solving skills and attention to detail. - Ability to work independently and as part of a team to maintain the overall upkeep of the facility. - Strong commitment to safety and adherence to safety protocols in all maintenance activities.

Job DescriptionPlant Maintenance Technician - Industrial Systems & Automation Grand Rapids, MI Join a team where your craftsmanship keeps people safe, product moving, and systems performing at their best. Your mission: maximize uptime, elevate safety, and continuously improve how our facility runs. How you'll contribute Execute preventive maintenance routines and facility inspections that keep assets reliable. Pinpoint and resolve issues across mechanical, electrical, and plumbing disciplines. Act quickly on maintenance calls and emergencies to reduce downtime. Maintain thorough documentation on repairs, diagnostics, and component replacements. Assist with equipment setup and teardown for operational changes and events. Collaborate with peers to refine processes and strengthen safety culture. Follow safety regulations and internal policies with precision. Background we're seeking High school diploma or equivalent; trade school or technical degree a plus. Proven experience as a maintenance technician or similar. Preferred: experience in high pressure die casting environments. Preferred: prior work with CNC machines. Strong grasp of mechanical, electrical, and plumbing systems. Proficient at reading manuals, prints, and schematics. Detail-oriented troubleshooter with solid problem-solving skills. Effective communicator and collaborative teammate. Open to flexible scheduling, including weekends and holidays as needed. Core competencies Heavy Equipment Repair Mechanical Troubleshooting Skills Electrical Installation Electrical Troubleshooting Electrical Repair Relay Testing High Voltage Systems Conduit Pulling Pneumatics Troubleshooting Maintenance and Repair Skills Conduit Bending Electrical Metallic Tubing (EMT) Industrial Electrical Experience Machine Safety Inspections Equipment & platforms Programmable Logic Controllers: Allen Bradley, Fanuc, Mitsubishi Conveyor systems Servo motors This is an on-site role in Grand Rapids, MI.

Fraza & Vitan Equipment is looking for an experienced Forklift Technician to repair heavy equipment. You'll service, diagnose, and maintain forklifts and material handling equipment-no two days are the same. Why You'll Love It Here: Top pay based on experience Company vehicle provided No weekends & flexible schedule PTO, medical, dental, vision, 401(k) with match Commission opportunities to boost your earnings What You'll Do: Diagnose and repair mechanical, electrical, and hydraulic issues Perform preventative maintenance to keep equipment in top shape Travel to customer sites-variety of work every day Ensure equipment is safe and meets standards Keep accurate records of work performed What You'll Need: 2+ years' experience in forklift or heavy equipment repair (electric, propane, diesel) Strong troubleshooting skills and safety focus Valid driver's license Take the next step in your career-apply today!

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team. Want to Learn More? Watch A Day in the Life of a Crown Field Service Technician! click here . Job Posting External Job Duties Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. Perform all assigned planned maintenance on customer lift trucks. Maintain a service van and its inventory. Process paperwork after completion of each job. Minimum Qualifications Less than 2 years related experience High school diploma or equivalent Valid driver's license, good driving record, and ability to safely operate lift trucks. Preferred Qualifications Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. Good written/verbal communication and customer care skills. Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. Industry related training is preferred Ability to read and understand service manuals, plan, and follow-through Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. Crown also offers Service Technicians: Award-Winning Service Training Company Vehicle for Field Service Technicians Tool Insurance No Flat Rate 40 Hours Per Week plus Overtime Uniforms Specialty Tools Primarily 1st Shift Career Advancement Opportunities EOE Veterans/Disabilities

Job Description Are you looking to grow your skills as a mechanic? Are you looking for not just another job, but a career? You can count on Baker Auto Group to heavily invest in your Technician career through training, resources, and support. Our busy shop offers excellent pay and benefits for the right individuals What will you be doing? Factory training courses Perform work as outlined in repair order Perform all work with efficiency and accuracy and in accordance with dealership and factory standards Diagnose and repair vehicle malfunction Communicate with the parts department to secure necessary parts Save and tag warranty parts Work with service advisers and provide a recommendation if repair order needs to be adjusted Road test vehicles as needed for quality assessment Maintain working knowledge of factory technical bulletins Ensure customer vehicle cleanliness Maintain a neat and orderly work area Qualification requirements: High School diploma or equivalent Valid driver's license Experience diagnosing and repairing relevant makes and models Valid Drivers License ASE or State of Michigan Certification Motivation to work independently Desire to learn and attend training sessions for products Excellent verbal and communication skills Job Type: Full-time Pay: Up to $130,000.00 per year Benefits: 401(k) Health insurance Schedule: Monday to Friday Work Location: In person .

$15.00 per hour Part-time position Must be 16 to apply Part-time medical benefits available We now offer DailyPay - Access your pay before payday! Referral program Scholarship opportunities Employee discounts at our Bistro Use of our beautiful gym and indoor pool A caring culture that encourages career growth Fun, warm and professional environment Join a unified team with supportive management and talented co-workers who want to make a meaningful difference for our residents. Be part of something special! GENERAL SUMMARY: The Utility Worker performs a number of kitchen activities including pot washing, dish washing, general cleaning duties and storing food and non-food supplies. Please attach a resume or provide previous employment, certifications, skills, or experience that would help you to be successful in this position. PRINCIPLE DUTIES: 1. Performs under the direction of supervisory personnel, dish and pot washing, general cleaning duties and storing food and non-food supplies. 2. Sets up the dish and pot washing area. 3. Prepares for dish washing and washes pots, dishes and utensils. 4. Distributes and stores clean pots, dishes and utensils. 5. Cleans and sanitizes production equipment, work surfaces and kitchen according to cleaning schedules and procedures. 6. Empties trash containers as required. Other Duties: 1. Maintains standards for personal appearance and cleanliness. 2. Maintains safe and sanitary conditions. 3. Attends in-service training and education sessions as assigned. 4. Performs specific work duties and responsibilities as assigned by supervisor. QUALIFICATIONS: 1. Ability to understand and follow instructions in English. 2. Ability to set up and operate dish washing equipment. PHYSICAL REQUIREMENTS/WORKING CONDITIONS: Works indoors; must be able to stand/walk for 100% of the work day; must be able to lift and carry up to 50 lbs. independently; must be able to push and pull bus carts and tray carts weighing up to 100 lbs. independently; must be able to bend, stoop, reach, and balance frequently throughout the work day. Must be able to perform sweeping/mopping functions with ease. May be exposed to quick variance of hot and cold temperatures from ovens and freezers. May be exposed to industrial cleaning chemicals, and to hot water temperatures regularly.

Company & Benefits Information At Blain's Farm & Fleet we believe everyone deserves the opportunity to have a job they love, work in a great environment, grow their career & enjoy a positive balance. As a family-owned retailer we take pride in offering a competitive benefit package designed to support you & your life. It is one of the reasons we have been named a Forbes Best Employer for seven consecutive years! Associates hired into a full-time role will become eligible for the following benefits effective their 91 st day of full-time employment: Medical, Prescription, Dental, Vision, Short & Long Term Disability, Life Insurance, Ancillary Benefits, Identity Theft Protection, Pet Insurance, Etc. All major Holidays & Birthday off Advanced Leadership Training Programs: build the skills to grow your career Associate discount on name brands like Carhartt, Under Armour, STIHL, Milwaukee Tool, DeWalt & much more! Internal recognition programs that support an engaged workplace 401(K) with company match Paid ASE testing and certifications Compensation Saturday & Sunday weekend premium pay $2.50 per hour Base pay up to $18.50/hr The pay listed for this position may vary based on experience. Please note, compensation decisions are contingent on the facts and conditions for each job opening. We take into consideration the minimum requirements outlined in the job description, such as, training and experience, the position's work location, required travel (if any), and external market conditions when determining the final salary for potential new hires. Please note salary estimates published via alternate online job boards may not be a true representation of the actual pay range offered for this position. Please refer to the Blain's Farm & Fleet position description for accurate pay range information. Job Duties As a Service Center Automotive Technician, you'll perform a wide range of services and duties in our Automotive Service Center. This can include, but is not limited to: Excellent customer service Repair and install tires Balance wheels Install batteries, head lamps and other basic automotive parts Perform oil changes Brake system repair Other duties assigned with progressive on the job training Qualifications Must possess a valid driver's license Must have great communication skills Ability to work evenings when needed and at least every other weekend Ability to pass pre-employment drug screening and background checks Ability to read and speak English Ability to effectively communicate with customers and coworkers Must be 18 years of age or older Prior auto repair experience is preferred Prior retail experience preferred *Michigan Stores Only* ASE A4 and A6 Certifications required for Tech Level II and ASE A3, A4, A5 and A6 Certifications required for Tech Level III OR equivalent Michigan certifications. EEO Statement Blain Supply, Inc and Blain's Farm and Fleet (collectively "Blain's") is proud to be an Equal Opportunity Employer. We recognize the importance of diversity and creating an inclusive culture in order to leverage the skills and talents of all people to the mutual advantage of each individual and the organization. Blain's does not discriminate against applicants or employees on the basis of race, religion, color, sex (including pregnancy and sexual harassment), sexual orientation, gender identity, national origin, age, marital status, disability, military or veteran status, or any applicable legally protected status. Our goal is to continue to be recognized as an employer of choice and we have received Forbes Best Mid-Sized company to work for an unprecedented 7 years in a row.

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military

Job Description Fraza & Vitan Equipment is looking for an experienced Forklift Technician to repair heavy equipment. You'll service, diagnose, and maintain forklifts and material handling equipment-no two days are the same. Why You'll Love It Here: Top pay based on experience Company vehicle provided No weekends & flexible schedule PTO, medical, dental, vision, 401(k) with match Commission opportunities to boost your earnings What You'll Do: Diagnose and repair mechanical, electrical, and hydraulic issues Perform preventative maintenance to keep equipment in top shape Travel to customer sites-variety of work every day Ensure equipment is safe and meets standards Keep accurate records of work performed What You'll Need: 2+ years' experience in forklift or heavy equipment repair (electric, propane, diesel) Strong troubleshooting skills and safety focus Valid driver's license Take the next step in your career-apply today! Powered by JazzHR 2sYTrBmfEM

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team. Want to Learn More? Watch A Day in the Life of a Crown Field Service Technician! click here. Job Posting External Job Duties * Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. * Perform all assigned planned maintenance on customer lift trucks. * Maintain a service van and its inventory. * Process paperwork after completion of each job. Minimum Qualifications * Less than 2 years related experience * High school diploma or equivalent * Valid driver's license, good driving record, and ability to safely operate lift trucks. Preferred Qualifications * Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. * Good written/verbal communication and customer care skills. * Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. * Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. * Industry related training is preferred * Ability to read and understand service manuals, plan, and follow-through Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. Crown also offers Service Technicians: * Award-Winning Service Training Company Vehicle for Field Service Technicians Tool Insurance No Flat Rate 40 Hours Per Week plus Overtime Uniforms Specialty Tools Primarily 1st Shift Career Advancement Opportunities EOE Veterans/Disabilities Nearest Major Market: Grand Rapids Job Segment: Diesel Mechanic, Maintenance, Electrical, Maintenance Mechanic, Manufacturing, Customer Service, Engineering