General production manager jobs in Newburyport, MA - 1,176 jobs

The individual in this position is responsible for running an entire production line, and ensuring line productivity meets department standards for volume and quality. This is accomplished by assigning daily duties, overseeing line personnel and ensuring issues are addressed in a timely manner. Essential Job Functions & Responsibilities: Coordinate Line Productivity • Ensure line personnel are effectively utilized at all times; to include setup and changeovers. • Leads and motivates line staff to ensure optimal productivity and work quality; provide necessary training and direction to ensure proper completion of tasks. • Directs and monitors to ensure proper procedures and controls are met and training issues are communicated to the supervisor in a timely manner. • Communicate shift productivity standards to line staff; to ensure volume standards are met or exceeded. • Actively lead the daily shift handover meetings. • Verify that lines are supplied with necessary components to meet daily production schedule. • Identify line issues using root cause analysis (5 Why and Fishbone) and communicate with supervision and maintenance personnel to maximize line efficiencies. Ensure quality & safety standards • Responsible for inspecting finished products to ensure they meet production/quality standards; this may include a requirement to taste product as part of daily quality audits. • Ensure all Lindt & Sprungli health and safety guidelines are followed; report issues in a timely and accurate manner to management. • Required to use proper safety gear when performing assigned tasks • Follow all Lock Out Tag Out policies to ensure Line Lead safety and the safety of those working in the area. • Oversee line staff to ensure policies and procedures are followed; address and/or escalate issues in a timely manner to management. • By applying 5S methodeologies, ensure work areas and equipment is maintained in a clean and sanitary condition. • Actively participate on TPM teams to assist in the implementation and expansion of Lean initiatives throughout the facility. Administrative duties • Responsible for accurate record keeping and timely submission of documents manually and/or electronically using JDEdwards, LMS, Integrated Control System, Ignition, Brady Link 360 system and ADP. • Monitor attendance for assigned shift and report line capacity issues to supervision. • In partnership with Facilities, responsible for establishing and maintaining accurate record keeping logs that will communicate downtime, resolutions and preventive maintenance conducted on machine. • Maintain accurate machine logs to identify efficiencies, trends, benchmark problems, issues and resolutions. Communicate consistent issues to the supervisor in a timely manner. • Attend daily and weekly technical meetings to report and discuss productivity and safety issues, participate in identifying resolutions to problems and making recommendations to management. Qualifications & Requirements: Experience: Required • 2 years experience in a manufacturing environment, preferably in a food industry Preferred • 2 years supervisory/lead experience • Route Cause Analysis (5 Why/Fishbone) • Leadership training • Total Productive Maintenance experience Skills & Knowledge: • Ability to demonstrate solid operating knowledge of machinery and manufacturing equipment • Strong verbal and written communication skills • Ability to work collaboratively • Ability to prioritize and multi-task in a fast paced environment • Basic computer skills • Basic mechanical skills • Ability to identify line issues using Root Cause Analysis (5 Why and Fishbone) and communicate with Supervision and Maintenance to maximize line efficiencies • Total Productive Maintenance knowledge • Second language a plus Education: • High School Graduate • Associates or Bachelors degree a plus Other Requirements: • Regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 40 pounds, occasionally lift and/or move up to 50 pounds • Ability to climb, balance, stoop, kneel, crouch and reach with arms • Demonstrated hand/eye coordination • Flexibility to meet rotational shift changes, as required • Weekend work, as required Why Lindt? As a multi-channel, fast-growing consumer goods company, we recognize that in a competitive market, hiring the right talent makes all the difference. To create happy and loyal Lindt consumers, we need to hire and retain empowered and results-driven Lindt employees. Our teams are comprised of inspired and dedicated professionals who stretch the boundaries of a typical career experience by living our Core Values and making a difference in our business every day. To learn more about our culture and teams, visit ********************** Our Core Values: • Passion For The Best - At Lindt we have pride and passion for what we do - we aspire for excellence in everything. • In It Together - At Lindt we are one team with a shared purpose - we invest in our relationships and value each other. • Always Evolving - At Lindt we shape our future - we take opportunities to improve, adapt to change and build on our strengths. • Make An Impact - At Lindt we take responsibility for driving results - we focus on what matters to deliver on our commitments. • Act Responsibly - We act with integrity, treat others with respect, celebrate diversity and care for the environment to create a sustainable tomorrow. This is not exhaustive and the Company reserves the right to adjust the as well as ask employees to undertake additional or different job responsibilities. Lindt and Sprüngli is an equal opportunity employer and considers all qualified applicants for employment without regard to race, color, national origin, religion, sex, disability, age, veteran status, or any other classification protected by state, local or federal law. Applicants for this position must successfully pass a background screening and may be required to pass drug screenings as well. All Lindt & Sprüngli (USA) Inc. properties are smoke and tobacco free. Requirements Qualifications & Requirements: Experience: Required • 2 years experience in a manufacturing environment, preferably in a food industry Preferred • 2 years supervisory/lead experience • Route Cause Analysis (5 Why/Fishbone) • Leadership training • Total Productive Maintenance experience Skills & Knowledge: • Ability to demonstrate solid operating knowledge of machinery and manufacturing equipment • Strong verbal and written communication skills • Ability to work collaboratively • Ability to prioritize and multi-task in a fast paced environment • Basic computer skills • Basic mechanical skills • Ability to identify line issues using Root Cause Analysis (5 Why and Fishbone) and communicate with Supervision and Maintenance to maximize line efficiencies • Total Productive Maintenance knowledge • Second language a plus Education: • High School Graduate • Associates or Bachelors degree a plus Other Requirements: • Regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 40 pounds, occasionally lift and/or move up to 50 pounds • Ability to climb, balance, stoop, kneel, crouch and reach with arms • Demonstrated hand/eye coordination • Flexibility to meet rotational shift changes, as required • Weekend work, as required Why Lindt? As a multi-channel, fast-growing consumer goods company, we recognize that in a competitive market, hiring the right talent makes all the difference. To create happy and loyal Lindt consumers, we need to hire and retain empowered and results-driven Lindt employees. Our teams are comprised of inspired and dedicated professionals who stretch the boundaries of a typical career experience by living our Core Values and making a difference in our business every day. To learn more about our culture and teams, visit ********************** Our Core Values: • Passion For The Best - At Lindt we have pride and passion for what we do - we aspire for excellence in everything. • In It Together - At Lindt we are one team with a shared purpose - we invest in our relationships and value each other. • Always Evolving - At Lindt we shape our future - we take opportunities to improve, adapt to change and build on our strengths. • Make An Impact - At Lindt we take responsibility for driving results - we focus on what matters to deliver on our commitments. • Act Responsibly - We act with integrity, treat others with respect, celebrate diversity and care for the environment to create a sustainable tomorrow. This is not exhaustive and the Company reserves the right to adjust the job description as well as ask employees to undertake additional or different job responsibilities. Lindt and Sprüngli is an equal opportunity employer and considers all qualified applicants for employment without regard to race, color, national origin, religion, sex, disability, age, veteran status, or any other classification protected by state, local or federal law. Applicants for this position must successfully pass a background screening and may be required to pass drug screenings as well. All Lindt & Sprüngli (USA) Inc. properties are smoke and tobacco free.

Immediate need in the Framingham area for a Production Manager Production Manager responsible for coordinating people, equipment, and processes to achieve production goals. ONSITE Associate or bachelor's degree in manufacturing, Industrial Technology, or related field preferred (equivalent experience accepted). · 5+ years of experience in machining, manufacturing, or production leadership. · Strong understanding of Swiss-type CNC lathes, metalworking processes, and production planning. · Knowledge of ACME screw machines a plus. · Experience with any of the following: Heat Treatment, AutoCAD, Solid Works, PartMaker, G code, or M code is a plus. · Proven ability to lead, motivate, and develop employees in a fast-paced, team-driven environment. · Skilled at identifying and solving problems and implementing practical solutions that improve output. · Familiarity with Lean Manufacturing, 5S, and continuous improvement practices. · Proficient in ERP/MRP systems and Microsoft Office.

NetSuite System Lead (Hybrid - US) A rapidly scaling, globally operating professional services organization is seeking an experienced NetSuite System Lead to own and evolve its ERP and connected systems landscape. This role sits at the centre of finance, operations, and technology, with full responsibility for the ongoing support, optimization, and integration of NetSuite in a high-growth environment. The Opportunity You will act as the internal owner of NetSuite, partnering closely with finance and operational stakeholders to ensure the platform scales alongside the business. This is a hands-on, high-impact role with genuine influence over system design, governance, and roadmap decisions. The organization has grown significantly in recent years and continues to invest heavily in its people, systems, and long-term infrastructure. Key Responsibilities Own and administer the NetSuite environment end to end Manage users, roles, permissions, workflows, and configurations Lead ongoing system optimization, enhancements, and automation Support and improve integrations across a broader SaaS stack Troubleshoot issues and coordinate vendor escalations Partner with finance and operations to translate business needs into system solutions Maintain documentation, controls, and governance standards Support reporting, data accuracy, and system reliability Required Experience 4+ years hands-on NetSuite administration or system ownership Strong understanding of workflows, roles, permissions, and data structures Experience supporting integrations and multi-system environments Ability to work directly with non-technical stakeholders Comfortable operating in a fast-paced, scaling organization Nice to Have Exposure to tools such as OpenAir, Concur, Salesforce, Avalara, or similar Experience in professional services, asset-intensive, or operationally complex environments Working Model Hybrid role within the US Occasional in-office presence (monthly cadence) No weekly or daily travel expectation Work cross-functionally with international teams Why This Role Ownership of a global NetSuite environment Direct impact during rapid organizational growth Strong, people-first culture with real investment in support Broad exposure across ERP and SaaS platforms Competitive compensation, bonus, and strong benefits If you're looking for a role where you can own the system, shape the roadmap, and grow alongside the business, this is worth a conversation.

Role: Autonomous Vehicle Operations Supervisor No of positions Open: 3 The AV Supervisor will oversee daily operational activities for the Autonomous Vehicle (AV) Drive Operations Program across designated city sites. This role ensures smooth field operations, compliance with safety standards, quality of service delivery, and team performance. The AV Supervisor will work closely with local and regional leaders to ensure efficient deployment of AV fleets and consistent driver/operator management. Key Responsibilities Lead, coordinate, and supervise AV Driver/Operator teams across assigned locations. Conduct daily shift planning, scheduling, task delegation, and attendance tracking. Ensure compliance with all safety, security, and operational protocols. Train, coach, and mentor new and existing AV operators on operational procedures and program standards. Conduct performance reviews, provide feedback, and manage disciplinary actions when required. Collaborate with cross-functional teams (Operations, Fleet, Safety, Engineering) to ensure vehicle readiness and resolve operational issues. Monitor site productivity metrics and implement improvements to enhance efficiency. Respond to on-ground escalations and operational emergencies promptly. Prepare weekly operational status reports and performance summaries. Coordinate with Fleet & Maintenance teams to ensure optimal vehicle uptime. Travel between Tampa, Baltimore, and Pittsburgh as operational needs require. Qualifications 3+ years of experience in Operations, Transportation, Logistics, Automotive, or related field. Prior experience in a supervisory or lead role managing teams. Strong understanding of safety protocols and compliance-driven environments. Excellent communication, leadership, and people management skills. Ability to analyze performance metrics and identify process improvement opportunities. Comfortable working in dynamic and fast-paced field settings. Valid driver's license with a clean driving record. Ability to travel between assigned cities as needed. Preferred Skills Experience working with autonomous vehicles, fleet operations, or mobility transportation programs. Knowledge of incident reporting, compliance documentation, and operational audits. Technical aptitude to understand basic AV system operations and diagnostics Work Environment On-site operations environment; may require early mornings, late evenings, weekends, or split shifts based on program schedules. Field-based work involving both indoor and outdoor environments. Significant travel required - approximately 90% of the time across locations.

Central Processing Supervisor, Core Laboratory - Evening Shift Evening Shift: 3p - 11:30p ($3/hr evening diff). Must be ASCP certified (or equivalent). Sign-on bonus eligible. Responsibilities: Responsible for coordinating the daily operation of the front office of the core laboratory. Oversees all Pre and Post analytic activity on the evening shift, in close conjunction with the day shift MT Operations Coordinator, reference lab staff, and other individuals who oversee areas that have an overlapping operating relationship with Central Processing. Ensures that all activities, processes and policies are carried out in strict compliance with governmental regulations, licensing agency standards, and hospital policies and procedures. Responsible for day-to-day general management including staffing, schedules, payroll, performance management, training, education, development of policy and protocol, compliance, and safety. FTE's: 25+/-. Reports to the Technical Director of Pre/Post Analytics in the Core Laboratory. Qualifications: MT (ASCP) or equivalent. Bachelor's Degree in Medical Technology or physical sciences. 4+ years of hospital laboratory experience, including knowledge of &/or experience with pre/post analytics &/or central processing. 1+ years of leadership experience. Preferred: experience overseeing non-exempt hourly staff.

At Tend, we do dentistry differently - without compromising on excellence or ambition. As a Lead Dentist, you'll set the bar for clinical quality, mentor a high-performing team, and help shape the patient experience across your studio. You'll balance delivering best-in-class dentistry with leading and coaching dentists, hygienists, and dental assistants to excel clinically and professionally. Together with the Studio Manager, you'll create an environment that embraces Tend's Mission, Vision, and Values - and drives both patient and studio success. We offer a guaranteed base plus a production bonus. Lead Dentists earn 32-40% of their adjusted production, making this one of the most competitive compensation models in the industry. You'll also receive leadership bonuses, transparency, and support to help you thrive. What You'll Do Clinical Leadership & Mentorship Mentor and coach dentists, hygienists, and dental assistants in diagnosis, treatment planning, clinical skills, and patient care Conduct regular performance reviews for general dentists; create action plans as needed Partner with the Lead Hygienist and Lead Dental Assistant to provide team-wide mentorship and development Lead clinical onboarding and quality assurance reviews for new hires Ensure consistent delivery of high-quality care and patient experience across all providers Studio Performance & Patient Care Deliver comprehensive dentistry services at or above the standard of care, while modeling clinical excellence for your team Partner with the Studio Manager to optimize schedules, improve patient access, and achieve production and care outcome goals Lead daily pre-shift huddles and studio calibrations focused on workflow, patient care, and efficiency Review and analyze clinical outcomes (e.g., REDOs, escalations) and implement solutions to continuously improve care Take ownership of complex cases and coordinate member escalations, including making determinations on refunds and clinical resolution Culture & Team Development Build a collaborative, inclusive, and growth-oriented studio culture with your Studio Manager and clinical leads Identify and nurture clinical team members with leadership potential Participate in leadership development meetings and cascade key updates to your studio team Model Tend's mission, vision, and values every day - and inspire others to do the same Who You Are You embody our Tend values and demonstrate advanced leadership competencies that ensure patient success, team excellence, and studio growth. Tend Values Tend to Others - Deliver outstanding oral health outcomes and patient experiences. You put the team and patient first, even in fast-paced settings. Be Brave Enough to Lead - Act with integrity and take initiative to solve problems, coach others, and raise the bar. Savor the Ride - Celebrate wins, stay resilient in challenging moments, and bring positivity to the workplace. Embrace Our Differences - Welcome and value diverse backgrounds, ideas, and feedback. Communicate with respect and trust. Rooted in Growth - Seek ongoing learning and improvement-for yourself and your team. Role-Based Competencies Earn and Give Trust - Earn the confidence of patients and teammates through honesty, transparency, and follow-through. Lead with Clinical Judgement - Make sound clinical decisions grounded in data, evidence, and patient needs. Empower Your Team - Set clear goals, delegate effectively, and help your team succeed. What You Have DDS or DMD degree from an accredited dental school Current, active dental license in the state where you practice Current CPR/BLS certification Active DEA registration Minimum 6 years of post-residency experience in private practice, DSO, or similar setting in a leadership role Proven experience mentoring, teaching, or leading providers in a multi-chair environment Demonstrated success managing complex patient cases and provider escalations Comfort with modern technology and digital workflows (Invisalign certification strongly preferred) Ability to work a full-time schedule of 4 days per week + 2 Saturdays per month Physical Requirements This position requires the ability to perform the essential job duties listed, with or without reasonable accommodation: Ability to sit and stand for extended periods while performing clinical procedures. Manual dexterity and fine motor skills to handle dental instruments and perform precise procedures. Adequate vision (with or without correction) to read charts, interpret radiographs, and operate clinical equipment. Ability to bend, reach, and maintain ergonomic positioning for patient care. Occasional lifting or movement of equipment and supplies up to 25 pounds. Ability to communicate effectively with patients, team members, and other healthcare professionals in person and via technology. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the role. What We Offer Dentist Equity & Partnership - Opportunity to invest alongside Tend and benefit from our growth CE & Professional Development - Virtual and in-person CE opportunities and internal clinical forums Time to Recharge - Enjoy generous Paid Time Off (PTO) and company holidays - because rest is productive. Malpractice Insurance - Full coverage provided at no cost to you Health Comes First - Medical, dental, and vision insurance - plus our own Dental Wellness Program Plan for the Future - 401(k) with company match Support, When You Need It - Life & AD&D insurance, legal support, EAP, and health advocacy Smart Spending Options - FSAs, HSAs, and pre-tax transit and parking benefits Generous paid time off + company holidays Pay Range $194,000 - $350,000 USD The Tend Difference The highest standard of care, anywhere. At Tend, you'll work alongside esteemed clinical leaders and experience-obsessed colleagues to deliver care that's not only top-tier - it's unforgettable. With access to advanced technology and thoughtfully designed studios, you'll help create dental experiences that patients actually look forward to. Our hospitality-driven approach makes every visit feel personal, warm, and empowering. A top-tier clinical team who puts patients first. We value science over sales and lead with empathy, transparency, and integrity. There are no production quotas here - just a shared commitment to doing what's right for our patients. We foster a collaborative, inclusive culture where team members go the extra mile for each other and for every patient who walks through our doors. Innovate Dentistry. Tend to Others. Grow Together. Tend is redefining what it means to grow a career in dentistry. We offer a modern, patient-first environment backed by cutting-edge tools and systems, industry-leading compensation and benefits, and robust opportunities for continuing education and professional development. Whether you're clinical or corporate, you'll be part of something meaningful - and surrounded by people who care. Tend is an Equal Opportunity Employer. We're committed to fostering a workplace where everyone feels seen, heard, and supported. Tend does not discriminate based on race, color, religion, sex, national origin, age, disability, genetics, gender identity or expression, sexual orientation, veteran status, or any other protected status in accordance with applicable federal, state, and local laws. This policy applies to all aspects of employment, including recruitment, hiring, promotion, compensation, benefits, and termination. Legal and Compliance Notice: Tend complies with all applicable federal, state, and local laws governing nondiscrimination, equal employment opportunity, pay transparency, and other employment-related requirements. Where specific state disclosures or postings are required by law, we provide this information as part of our hiring process or upon request. Your privacy matters. To learn more about how we collect, use, and protect your information, please review our privacy policy here .

General Manager - Construction & Infrastructure Services A long-established construction and infrastructure services organization is seeking a hands-on General Manager to oversee all day-to-day operations, drive performance, and lead the business through its next phase of growth. This role requires a leader who thrives in a fast-paced, field-and-office environment and can own responsibility for safety, operations, financial results, and people leadership. Key Responsibilities • Lead as an engaged, visible operational head focused on safety, accountability, and high standards • Oversee revenue, margins, budgeting, and overall financial performance • Direct estimating, bidding, scheduling, project execution, and customer delivery • Build and develop a strong, collaborative management team • Implement and refine processes across estimating, sales, project management, record keeping, reporting, and billing • Manage bid preparation, pricing structures, regulatory specs, project documentation, and digital systems • Review project status, timelines, and costs regularly to improve efficiency and outcomes • Coordinate contract-related activities including bonding, compliance, certifications, change order tracking, and dispute resolution • Maintain consistent communication with public-sector project administrators to support timely approvals and payments • Ensure accurate billing, final quantities, and project close-out reviews • Maintain compliance with annual certifications and regulatory requirements • Report performance updates to ownership in a clear and concise manner • Partner with leadership to shape long- and short-term business strategies • Build strong relationships across customers, field teams, and industry partners • Champion technology adoption to enhance productivity and competitiveness Qualifications • 10+ years of successful leadership in construction or similar operational environments • Prior experience running a business unit with full P&L responsibility • Proven ability to build and guide high-performing teams • Knowledge of roadway, infrastructure, or heavy-civil work preferred • Strong communication skills with customers, internal teams, and external partners • Familiarity with OSHA, EPA standards, DOT specifications, and industry guidelines is beneficial

POSITION TITLE: Production Manager DEPARTMENT: Factory Management JOB TYPE: Exempt SHIFT: 1st and 2nd SALARY RANGE: $75,000 - $100,000 (BOE) FUNCTION This position will be responsible for assisting the Manufacturing Manager in one or more departments, establishing schedules; meeting production standards and training associates to maintain a safe working environment. This position will assist the Manufacturing Manager to meet customer requirements in a fast-paced make-to-order environment. RESPONSIBILITIES Selects, leads and directs employees (associates, Team leaders, supervisors) to work in a productive and safe manner Plans and provides employees training in processes and equipment operation Enforces all plant rules and regulations Drives all facets of continuous improvement - quality, manufacturing, and cost reductions Manage team daily to optimize production efficiencies and achieve goals Provide the ultimate customer service MINIMUM QUALIFICATIONS The successful candidate will have minimum of 8 years of managerial experience in a production operations environment with strong leadership skill. Bachelor's degree (preferably engineering) Can demonstrate previous success. Understands employee empowerment and lean methodology Strong communication and HR skills required. Bi-lingual (Spanish and English) a must. REQUIREMENTS May be required to work some Saturday's AIS offers a friendly and casual workplace with competitive salary and benefits program. Benefits include medical and dental, 401K, FSA, and a bonus program. We are looking for someone with a good work ethic and enthusiasm for working in a fast-paced environment as we continue our strong growth in the marketplace. We are an Equal Opportunity Employer and do not discriminate on the basis of race, color, religion, sex, sexual orientation, age, genetic information, national origin, veteran status, membership in or application to the uniformed services, physical or mental disability or any other classification protected by applicable law. At AIS, we have a strong set of values that guide our business and help us align with our customers. We listen to our Customers. We rely on our Employees. We honor Integrity. We embrace Continuous Learning. We lead with Design. We create Value. We work to make the World better. No H-1B sponsorship offered for this position

You will be the Production Associate Manager for Lockheed Martin Missiles and Fire Control. Chelmsford Operations is home to some of the most advanced microelectronics manufacturing in Lockheed Martin. We build technology that keeps service members safe and enables mission success across the globe. We're a team that cares about excellence, ownership, each other and we're looking for a Production Associate Manager who shares that mindset. What You Will Be Doing As the Production Associate Manager, you will lead our 2nd shift Assembly & Test operations, where production momentum, problem solving, and real-time decision making happen. You'll be the senior leadership presence during the shift, ensuring your teams are supported, empowered, and set up for success. Your responsibilities will include, but are not limited to: Lead and develop a team of 2nd shift manufacturing supervisors and their Assembly & Test technicians. Own daily production execution to meet schedule, cost, and quality goals. Set the tone each evening: create clarity, alignment, and focus to ensure the shift launches strong and ends strong. Ensure your teams have the right staffing, training, resources, and escalation support. Partner closely with your peer Production Manager and day-shift leadership to drive continuity, handoffs, and cultural alignment. Champion continuous improvement to enhance flow, reduce defects, and strengthen performance. Promote a positive, collaborative culture where people feel supported, valued, and proud of their work. Who You Are You're someone who: Leads with clarity, accountability, and empathy. Thrives in environments where every hour counts and your presence matters. Can build trust across shifts and functions. Doesn't just maintain operations, you elevate them. What You Bring Bachelor's degree or equivalent experience. Experience leading leaders and/or large operational teams. Background in manufacturing. Working knowledge of Lean / Six Sigma and MRP systems. Strong communicator able to translate direction into action. Ability to obtain and maintain a Secret clearance (U.S. citizenship required). Why This Role Matters 2nd shift is where momentum is maintained and production is executed. Your leadership ensures: Teams feel supported, motivated, and valued. Work flows smoothly across shifts. Issues get solved early. The factory's performance doesn't rest on one shift alone. You'll have real influence here that is visible, immediate, and meaningful. Why Join Us This is a place where leaders grow. Where hard work means something. Where your presence has impact. At Chelmsford, you'll build teams, build capability, and build a legacy. If you're energized by leading people and driven by meaningful impact, we'd love to meet you. We are committed to supporting your work‑life balance and overall well‑being. Learn more about Lockheed Martin's comprehensive benefits package here. Further Information About This Opportunity This position is located in Chelmsford. Discover more about our Chelmsford, Massachusetts location. This is a 2nd Shift position. Typical hours are 4pm to 2:30am Mon-Thurs. MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access. The selected candidate must be able to obtain an interim secret clearance prior to start. Basic Qualifications • Bachelor's degree or equivalent experience. • Demonstrated experience leading supervisors or leading teams through leaders. • Background in manufacturing. • Working knowledge of Lean / Six Sigma principles and MRP systems. • Strong written and verbal communication skills; able to translate direction into actionable plans. • Ability to obtain and maintain a Secret clearance (U.S. citizenship required). Interim Secret clearance or higher is required prior to start. Desired skills • Prior leadership experience in a multi-shift or fast-paced manufacturing environment. • Experience with Apriso, CAM, or similar manufacturing systems. • Demonstrated ability to manage competing priorities and resolve issues at the appropriate level. • Experience improving workforce capability through structured training and development frameworks. Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. * At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Other Important Information By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to work remotely Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedule Information Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Security Clearance Information This position requires a government security clearance, you must be a US Citizen for consideration. Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $90,200 - $159,045. For states not referenced above, the salary range for this position will reflect the candidate's final work location. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. (Washington state applicants only) Non-represented full-time employees: accrue at least 10 hours per month of Paid Time Off (PTO) to be used for incidental absences and other reasons; receive at least 90 hours for holidays. Represented full time employees accrue 6.67 hours of Vacation per month; accrue up to 52 hours of sick leave annually; receive at least 96 hours for holidays. PTO, Vacation, sick leave, and holiday hours are prorated based on start date during the calendar year. This position is incentive plan eligible. Pay Rate: The annual base salary range for this position in most major metropolitan areas in California, Massachusetts, and New York is $103,700 - $179,860. For states not referenced above, the salary range for this position will reflect the candidate's final work location. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. This position is incentive plan eligible.

Working at Freudenberg: We will wow your world! Responsibilities: Collaborate with Production Leadership to prepare daily production agenda. Train new hires and current employees on an on-going basis and as required for development. Manufactures, packages, and repacks products including finished goods and raw materials adhering to manufacturing work instructions. Deviations during process are to be documented and reported to the Manager or Team Leader in a timely manner. Handles all materials and operates equipment in a conscientious and safe manner, prevents harm to self and others and/or damage to equipment. Support the inventory flow of material between the raw material warehouse and the Production and Repack groups. Complete transactions in SAP as required for cycle counts and/or if transferring stock in inventory. Operates industrial powered equipment according to training and the Freudenberg Safety Standards. Qualifications: Team-player and ability to lead a team. Conscientious about health and safety. Basic math and reading and basic knowledge of the metric system. Good computer skills and abilities. Experience with fork lift or powered industrial equipment required. Experience with ERP/MRP systems, SAP experience a plus. Experience with control systems such as Siemens PCS-7. The Freudenberg Group is an equal opportunity employer that is committed to diversity and inclusion. Employment opportunities are available to all applicants and associates without regard to race, color, religion, creed, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity or expression, national origin, ancestry, age, mental or physical disability, genetic information, marital status, familial status, sexual orientation, protected military or veteran status, or any other characteristic protected by applicable law. Klüber Lubrication NA LP

Metglas, Inc. is a world leading producer of Amorphous Metal Ribbon. Since our company began in the 1970's, Metglas, Inc. (then Allied Signal located in Morristown, NJ) pioneered the development and production of amorphous metal, a unique alloy that exhibits a structure in which the metal atoms occur in a random pattern. The key to Metglas Inc.'s proprietary manufacturing process is the rapid solidification of molten alloy at a rate of approximately one million degrees Celsius per second. We are currently looking for a Rim Manufacturing Leader for our Newburyport, MA location. This position requires the candidate to either currently reside in or be willing to relocate to Newburyport, Massachusetts. Within 2-3 years, the Operations Manager will be required to relocate again to Conway, South Carolina, where they will play a key role in overseeing and supporting the relocation of the facility, including equipment and operational processes. Relocation assistance is provided to support these moves. A strong commitment to mobility and long-term operational leadership is essential for this role. Responsibilities of Position: Manufacturing leader responsible for rim production at satellite Metglas facility located in Newburyport, MA Meet Metglas required delivery schedule while maintaining product quality Manage final inspection lab which includes equipment used for chemical analysis, microstructure evaluation and mechanical property verification Maintain proper documentation and traceability control Continuous improvement to increase production output and improve product quality/productivity Travel approximately 20% to visit suppliers and regular meetings at Metglas production facility in Conway, SC Position Scope: 5-7 operators including 1-2 welders P&L responsibility for rim production facility Key Success Factors (Specific expectations during next 6 - 18 months): Improve production output to meet Metglas required delivery schedule Ensure proper instruction documentation and quality requirements are being maintained Continuous improvement activities to improve productivity of rims at Metglas by 20% Attributes/Skills Required/Sought: Knowledge of powder metallurgy processing steps, screening, consolidation, hot isostatic pressing and heat treatment Leadership skills include effective management of personnel, goal setting and motivation Detail oriented with a sense of urgency to meet critical production schedule Quality control for documentation and acceptance criteria Experience/Education Required/Sought: Minimum BS in Materials Science Minimum of 5 years' working experience in an operational or quality role Experience with powder metallurgy Learn more about us at ****************

About Us Eat Well, Live Well. At Ajinomoto Cambrooke, we build careers grounded in helping improve people's health through nutritional therapies. Ajinomoto Cambrooke (ACI) was founded by parents looking to develop better solutions for their children with PKU. Over the subsequent 25 years, we have expanded into additional therapeutic areas with a focus on enjoyable nutrition as a core part of normalizing the life for people living with medical conditions. Joining ACI means becoming part of a diverse team of talented people who want to build their careers while contributing back to society in a positive way. We seek individuals who bring an entrepreneurial mindset with a bias for action and finding solutions. We provide an environment based in mutual respect and collaboration to support you and give you opportunities to learn and develop. Join us to find a rewarding work experience that lets you be at your best and have an impact on our patient communities. Why Join Us Our people are the key ingredient to our success. We offer a collaborative, innovative environment where you can grow your career and make an impact on global food and health solutions. We provide a comprehensive and competitive total rewards package, including: • Competitive Pay and Annual Bonus Opportunity • 401(k) with Company Contributions • Medical, Dental, and Vision - Effective Day 1 • Paid Time Off, Company Holidays, and Floating Holidays • Paid Parental Leave • Wellness Programs and Yearly Wellness Reimbursement • Work Flexibility • Company-Paid Life and Disability Insurance • Employee Assistance Program (EAP) • Tuition Reimbursement Opportunities • Career Growth and Development within a Global Organization • Company-Provided Mental Health and Caregiving support Overview Oversee manufacturing processes to meet/exceed daily safety, quality, productivity, cost, and team development daily, weekly, monthly, quarterly, and annual targets. Use Key Performance Indicators (KPIs) to measure process performance and run-to-target results. When targets are not met, follow the Plan-Do-Check-Act model to systematically analyze the root cause of failure and implement sustainable solutions to eliminate problems. Facilitate the implementation of continuous improvement programs to improve manufacturing efficiencies, eliminate waste, increase throughput, and schedule compliance. Promote a culture of team member involvement in all areas of manufacturing Supervise, coach, and train members of the manufacturing team members Ensure all regulatory requirements are met including but not limited to quality, regulatory, supply chain, product development, finance, customer service, etc. Qualifications Bachelor's degree in industrial engineering, business or engineering field preferred. Minimum 5 years supervisory/management experience in a manufacturing environment required. Food and Beverage manufacturing a plus. Exposure to implementing continuous improvement, employee involvement techniques, change management. Implementation experience of Lean Manufacturing techniques KNOWLEDGE, SKILLS, AND ABILITIES: Demonstrated people skills and ability to motivate and maintain a positive working environment Strong interpersonal and communication skills Working knowledge of Daily Management Systems and Lean Manufacturing techniques to eliminate waste Basis understanding of OSHA and FDA regulations Knowledge of Good Manufacturing Practices (GMPs) and familiarity with standard operating procedures (SOPs) Ability to transfer technical knowledge to practical applications Ability to lead and implement change while maintaining a high level of employee engagement Excellent follow-up skills and ability to drive results while building strong team involvement Working Conditions / Physical Requirements WORKING CONDITIONS: Work is performed primarily in a food/beverage manufacturing environment Ability to work extended days and/or weekends as needed Work must be performed in a safe manner for personal protection and for the protection of other team members. All safety, quality, and environmental procedures must be followed, enforced, and strictly complied with. PHYSICAL REQUIREMENTS: Ability to lift 50lbs Ability to stand, walk on concrete floors for ~8 hours Ability to walk, bend, reach, stoop, climb stairs/ladders Ability to wear all protective equipment Responsibilities Ensures that finished products are consistently manufactured meeting prescribed standards (compliant) with safety, quality, and good manufacturing practices, on time, and meeting patient expectations Ensures delivery of business objectives through the execution of standard processes, workflows, and resource management Leads daily management processes (cascading/escalation) for alignment with the objectives in the short term (Gambas, Team Huddles), Weekly Operational Reviews, and Monthly Operational reviews for medium and long term to achieve production plans Identify and achieve performance improvements through gap analysis and root-cause techniques Motivate, guide, support, and coach the resources to achieve objectives Elaborates and executes workforce development program that will provide appropriate flexibility of workforce and assets Focuses on material availability, finished goods quality, and on-time delivery through optimal resource allocation Provides timely feedback and coaching to individuals and teams to develop them to their full potential and to achieve objectives Ensure succession plans and development - coaching of direct reports (where applicable) including the development of specific training Promotes and enhances a positive labor-management relationship including efforts to continuously improve teamwork and establish high levels of employee involvement Leads a continuous improvement/employee involvement culture Drive for excellence and support operators and staff in their tasks focusing on the safety of people Ensure the timely launch of new products to the Market as per agreement with the business unit Other duties as assigned by the supervisor Salary Range $116,000 - $135,000 plus 15% Bonus Potential EEO Statement Ajinomoto Cambrooke, Inc. is an Equal Opportunity Employer and does not discriminate on the basis of race, religion, color, sex, age, physical or mental disability, national origin, veteran status or any other basis protected by state, federal, or local law. All employment is decided on the basis of qualifications, merit, and business need

Company DescriptionTedeschi Food Shops has been proudly serving our customers in Massachusetts, New Hampshire, Rhode Island and Connecticut every year since 1923. MissionWe provide you with the most convenient, highest quality products in friendly, clean stores! Company OverviewTedeschi Food Shops, Inc. is one of New England's most trusted family-owned and operated convenience store chains. We operate 193 convenience store locations throughout Massachusetts, New Hampshire, Rhode Island, and Connecticut. DescriptionExpect fresh. Job Description Train workers in production, sanitation and food safety procedures. Observe and evaluate workers and work procedures in order to ensure quality standards and service Assign duties, responsibilities and work stations to employees in accordance with work requirements. Reviews daily production goals with Plant Manager; minimize waste; increase productivity through continuous improvement. Daily Ordering of Ingredients through approved suppliers. Control FIFO. Maintain and review HACCP related documents including DO/RR and pre-shipment reviews. Ensure employees are following procedures. Qualifications Administration and Management -- Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources. Making Decisions and Solving Problems -- Analyzing information and evaluating results to choose the best solution and solve problems. Communicating with Supervisors, Peers, or Subordinates -- Providing information to supervisors, co-workers, and subordinates by telephone, in written form, email, or in person. Evaluating Information to Determine Compliance with Standards -- Using relevant information and individual judgment to determine whether events or processes comply with laws, regulations, or standards. Resolving Conflicts and Negotiating with Others -- Handling complaints, settling disputes, and resolving grievances and conflicts, or otherwise negotiating with others. Training Requirements: General safety, sanitation and hygiene procedures Product/production processes. Physical Demands: Light physical effort equal to frequent lifting or moving of lightweight materials. Regularly required to sit or stand, bend and/or reach. Manual dexterity- the ability to quickly move hands/arms, manipulate and/or assemble objects The ability to exert maximum muscle force to lift, push, pull and/or carry objects. Personal Protective Equipment: The use of gloves, hair net and frock is required. Work Environment: Working conditions are of temperatures product up to 30 pounds. Loose fitting clothes and jewelry are not permitted. Additional Information Will be required to perform other duties as requested, directed or assigned.

Join REEKON Tools as we enable the next generation of construction and home improvement professionals to complete their work quicker, more accurately, and faster than ever before. REEKON Tools is developing and launching innovative, completely new, hardware products at an unprecedented pace across the power and hand tool industry and establishing itself as a leader in professional tools and equipment. As the Head of Manufacturing at REEKON Tools, you will work hand in hand with our engineering and operations team as you lead the project management of New Product Introduction (NPI) efforts. You will oversee and execute the transition of prototypes to manufactured goods by driving day to day activities, identifying and addressing blockers, and maintaining program velocity to meet company level goals. This is a cross functional role with many touch points across supply chain, engineering, external vendor management, and project management. This is an onsite role in our Boston, MA office. The Job Manage and execute transition of hardware products from engineering samples to full volume production in their entirety Interface with global supply chain, develop relationships, and lead the transition of our products from development to full production Manage manufacturing, supply chain, and operations team and direct reports to achieve company goals and maintain product development velocity Discover new vendors and suppliers based on evolving needs of the organization and new product development Oversee and manage communication channels and tracking to ensure streamlined operations between internal and external groups Create and maintain Bill of Materials (BOM) for multiple products Develop QC plans for initial and continual production to maintain high quality standards Manage incoming and outgoing communications with supply vendors for both prototype and production parts Track and communicate changes with contract manufacturer partner Your Background 4-8 experience shipping hardware products working with Contract Manufacturers and suppliers across Asia Experienced working with consumer products and in R&D environments Served in project management roles overseeing decision making, task tracking, and risk identification and management Understand the transition from internal builds to manufacturing volumes Familiar with negotiating with external vendors and suppliers Familiar with engineering best practices and concepts Even if you don't check every box mentioned above, we still strongly encourage you to apply! At REEKON Tools, diversity is a cornerstone of the business we are building. We know that diverse perspectives foster the innovation we need to be successful and are committed to building our team that encompasses a wide variety of backgrounds, experiences, and skills! We are an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. For any questions - please email us at careers@reekon.tools

Responsibilitiesarrow_right * Collaborate with Production Leadership to prepare daily production agenda. * Train new hires and current employees on an on-going basis and as required for development. * Manufactures, packages, and repacks products including finished goods and raw materials adhering to manufacturing work instructions. Deviations during process are to be documented and reported to the Manager or Team Leader in a timely manner. * Handles all materials and operates equipment in a conscientious and safe manner, prevents harm to self and others and/or damage to equipment. * Support the inventory flow of material between the raw material warehouse and the Production and Repack groups. * Complete transactions in SAP as required for cycle counts and/or if transferring stock in inventory. * Operates industrial powered equipment according to training and the Freudenberg Safety Standards Qualificationsarrow_right * Team-player and ability to lead a team. * Conscientious about health and safety. * Basic math and reading and basic knowledge of the metric system. * Good computer skills and abilities. * Experience with fork lift or powered industrial equipment required. * Experience with ERP/MRP systems, SAP experience a plus. * Experience with control systems such as Siemens PCS-7.

New City Microcreamery is looking for a dedicated professional to lead the team making the worlds greatest Ice Cream. Our ideal team members are accountable, positive, team and goal oriented, inclusive, open to feedback, and willing to learn, among other things. Interested parties should send their resumes and a brief introduction about why you would like to join our team. As a leader of our team, you will be taught to make the world greatest ice cream and all the delicious chunks and swirls that go into it, and how to lead the rest of the team in doing so. Team members may be taught any of the following skills and tasks: Baking and Pastry, Cake Preparation, Ice cream production. Other potential requirements/skills for those looking to enter a leadership position may include: Leadership: organizing and guiding the team in their daily tasks, coordinating events with other leaders and teams, staff training and accountability Quality Control: upholding quality control standards in conjunction with the executive pastry chef, maintaining pars, collaborating on recipe development with the executive pastry chef, maintaining kitchen health, sanitation, and safety standards Shop Logistics: Ordering and inventory, shipment coordination Our business is constantly growing and changing, with a steady stream of new opportunities for new and existing team members alike. We are excited to speak to you about your future at New City Microcreamery!

CertaPro Painters is a leader in the residential and commercial painting industry throughout North America. We are an organization of professional painting contractors specializing in beautifying homes and buildings; interiors, exteriors, commercial, offices, and condominiums. Our success has been built on the foundation of delivering certainty to our customers - certainty of a job well done. We focus on the details of every project and most importantly, we focus on our clients. Overview Provide an exceptional experience for CertaPro Painters' customers to dramatically differentiate ourselves from our competition and to further ‘Deliver Extraordinary Experiences'. Fulfill the obligations of the essential functions; Production, Marketing, Quality Assurance, Administration, Safety, and Business Development. Responsibilities Provide an exceptional job opportunity for CertaPro Painters' Job Site Supervisors so as to differentiate ourselves from our competitors as the employer of choice in the painting labor workforce. Provide exceptional support to CertaPro Painters' Job Site Supervisors and build a performance culture among the team. Service all CertaPro Painters' customers with the objective of meeting their painting needs and building customers for life. Develop a close working relationship with the Residential and Commercial Sales Associates and the Office Associate to ensure all expectations set forth with the customers are met and best executed. Develop a recruiting, development, and retention program for the Job Site Supervisors as well as properly onboarding them to setting them up for production success. Ensure that all field programs and systems are being executed. Responsible for providing ongoing training and inspections related to safety, as well as conducting safety meetings. Responsible for ensuring that all crews are following Occupational Safety and Health Administration (OSHA) guidelines, Environmental Protection Agency (EPA) guidelines around Lead Safety and possess and maintain the required Material Safety Data Sheets (MSDS). Qualifications and Skills 2-year degree in related field required Current driver's license and reliable transportation and valid insurance. Position will travel to and from job sites and as needed. Expert in multiple finishes and paint applications. Exceptional communication skills with a friendly, positive demeanor Strong written/verbal skills, to include proof-reading and basic math skills for estimating High attention to detail and a strong work ethic Basic computer skills Proven record of ability to set, meet and exceed goals Must speak, read, and write English - Spanish speaking skills helpful but not necessary Previous experience in the paint industry preferred but not required Unrestricted driver's license and clean driving record Meticulous, clean, detail-oriented and taking pride in your work. Results driven Ability to work Monday-Friday with some Saturdays and some nights depending on the project. Benefits/Compensation: Competitive pay and benefits Each CertaPro Painters business is independently owned and operated. Compensation: $60,000.00 - $80,000.00 per year Opportunity is Knocking Qualities like working hard, getting the job done right, and fostering respect while working as part of a team are core to the CertaPro Painters brand culture. This makes each independently owned and operated CertaPro Painters franchise unique and fulfilling places to work. It is important to not only deliver memorable experiences for customers, but for team members of each independently owned and operated CertaPro Painters franchise, as well. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to CertaPro Painters Corporate.

Under the direct supervision of the Associate Director of Production, this "Floating" Concert Operations Stage Manager assists with all technical aspects and maintenance for Concert Operations facilities. (i.e. sound equipment, electrical systems, lighting systems, etc.). This position has responsibility to assist in the technical production and support for concerts, clinics, recitals, and other events held on and off campus. Works with appropriate area's regarding the set up and use of the facilities for college and outside rental functions, meetings and events. Hourly Rate: $25 Under the direct supervision of the Associate Director of Production, this "Floating" Concert Operations Stage Manager assists with all technical aspects and maintenance for Concert Operations facilities. (i.e. sound equipment, electrical systems, lighting systems, etc.). This position has responsibility to assist in the technical production and support for concerts, clinics, recitals, and other events held on and off campus. Works with appropriate area's regarding the set up and use of the facilities for college and outside rental functions, meetings and events. Essential Duties and Responsibilities: * Assists with technical and sound reinforcement needs for events at the Berklee Performance Center, The Lawrence and Alma Berk recital Hall, Colvin Hall, DFRH, Café 939, 160 Cafeteria, as well as off campus events (Commencement concert, Commencement, Encore Gala, etc.). * Operates venue lighting and sound equipment. Assists with load-in, load-out and set up of equipment for college shows, events, and outside productions. Also assists with spotlight operations, stage and equipment maintenance, electrical power distribution, specialized equipment, staging, stage sets and all related production needs. * Maintains, repairs, and installs concert sound and lighting equipment in the College's performance venues whenever necessary. * Reports equipment malfunctions or concerns to the Associate Director of Production. Makes recommendations for improvements to venues, equipment, etc. * Meet with Associate Director of Production to review all technical and production requirements for college shows and events (on and off campus). * Maintain appropriate event, production and maintenance records and distribute to appropriate individuals. * Other duties within the scope of the job description as assigned. Possible Additional Duties and Responsibilities: * Assist in supervision and/or training of work-study stage crew employees. Required Skills: * Strong technical skills to provide a working knowledge of the safety standards, upgrading, and maintenance of theater equipment, including operation of lighting systems, electrical systems and sound equipment. * Strong interpersonal and customer service skills. * Ability to work nights, weekends, holidays and overtime hour Required Experience: * Demonstrated experience in technical and production operations in a live music venue. * Related Bachelor's Degree preferred. * Experience in sound reinforcement and lighting techniques and operations. * Knowledge of state-of-the-art sound and lighting techniques and operations. * General knowledge of maintenance requirements and techniques for all sound and lighting equipment. This document does not create an employment contract, implied or otherwise, other than an "at will" employment relationship. Diversity, Equity, Inclusion & Equal Employment Opportunity at Berklee: We support an inclusive workplace where everyone excels based on personal merit, qualifications, experience, ability, and job performance. Berklee affirms that inequality is detrimental to our faculty, staff, students, and the communities we serve. Our goal is to make lasting change through our actions. Berklee is committed to providing fair and equitable consideration of all employees and applicants without regard to race, color, religion, ancestry, age, national origin, place of birth, gender, sexual orientation, gender identity or expression, disability, genetic information, or status as a member of the armed forces or veteran of the armed forces, or any other category protected by federal, state, or local law. As part of this commitment, Berklee will ensure that persons with disabilities are provided reasonable accommodations. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact the Human Resources Team at ************************ or call ************. * Currently enrolled Berklee students are not permitted to apply for staff or faculty positions.* Employee Type: Casual

Full-time Description Do you love cars? New England's Leading Auto-wash company, ScrubaDub, seeks part and full time Interior Cleaning Specialists to join our team with opportunity for career growth. A 50+ year old family business, ScrubaDub is transforming the car wash experience in New England and looking for new team members to grow with us. Responsibilities and Duties You'll lead a team of four to six team members to vacuum, wax, polish and clean vehicles in a fast-paced work environment as well as interact with customers and maintain the department in a clean and working state. Experience managing/leading a team and interacting with retail customers is preferred but not necessary as we will train the right candidate. Interior Department roles include window cleaning, vacuuming, and interior wiping; team members will rotate these roles throughout the day based on manager discretion. Requirements Full-time employees are eligible for benefits. This position has opportunity for growth to full site management level positions. Other benefits include: Average wage of $20-23.50 per hour, with wages and tips included Health Insurance 401K Retirement plan with 3% employer match Free carwashes for your personal vehicle Growth potential at a fast growing company Employee discount for products and services Salary Description $20-$23.50 per hour