Cable Technician
Installation technician job in Raleigh, NC
The Cable Technician is responsible for installing, maintaining, and troubleshooting structured cabling systems to support voice, data, video, and network communications. This role ensures all cabling infrastructure is installed to industry standards, project specifications, and customer requirements while maintaining safety and quality at all times.
Key Responsibilities
Installation & Cabling Work
Install, terminate, and test copper (Cat5e, Cat6, Cat6A) and fiber optic cabling systems.
Pull, label, route, and dress cables in commercial, industrial, and data center environments.
Install cable trays, J-hooks, ladder racks, racks, patch panels, and related infrastructure hardware.
Perform fiber splicing, connector installation, and end-to-end certification.
Install network equipment including switches, wireless access points, and telecom room hardware as directed.
Testing & Troubleshooting
Conduct continuity, performance, and certification testing using Fluke or similar testers.
Diagnose and resolve cable faults, signal loss, and connection issues.
Perform repairs and upgrades to existing cabling systems with minimal downtime.
Documentation & Compliance
Complete detailed daily job reports, cable logs, labeling documentation, and test results.
Ensure all cabling meets BICSI, NEC, and manufacturer standards.
Qualifications
1-3+ years of structured cabling or low-voltage installation experience preferred.
Knowledge of copper and fiber standards, cabling best practices, and industry tools.
Ability to read and interpret blueprints, floor plans, and cable layouts.
Experience with cable testing equipment (Fluke DSX, OTDR, light meters).
Familiarity with LOTO, ladder safety, PPE, confined spaces, and general construction safety.
Strong troubleshooting and problem-solving skills.
Ability to lift 50+ lbs, work on ladders, and work in overhead or crawl spaces.
Valid driver's license and reliable transportation.
Preferred Certifications
BICSI Installer 1 or Installer 2 (Copper or Fiber)
OSHA 10 or OSHA 30
Manufacturer-specific cabling certifications (e.g., Commscope, Panduit)
Technology Lead - Service Now
Installation technician job in Cary, NC
Warm Greetings! My name is Srinath and I am a Sr. Technical Recruiter with Avance Consulting. We are a leading consulting company and have been in consulting business for last 10 years. We are primary vendors to several Fortune 1000, Investment Banks and Financial companies.
I found your resume on one of the job boards and it looks to be a good fit for an open position we have. Please review the listed below. If you are interested, please respond with your updated resume or give me a call on ************ Ext 238 at your earliest convenience. If you are not looking for new roles, please forward this email to someone either from your professional network or friends who are looking for new opportunities since we have an excellent referral program.
Hi,
I hope you are doing good.
I have Opportunity with one of my client, please find below Job Description for your review. If you are interested please forward me your updated resume along with your contact details to discuss further
Role: Technology Lead - Service Now
Duration: Full TIme / Permanent
Location: Cary, NC
Qualifications Basic
• Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education.
• At least 4 years of experience with Information Technology.
Preferred
• At least 5 years of experience in configuration and maintenance of ITSM tools.
• At least 4 years experience configuring and maintaining Service Now.
• Good knowledge of Java/J2EE technology and framework.
• Domain knowledge of Insurance
• At least 5 years of experience in application maintenance and support.
• Analyze and resolve issues to ensure SLA adherence and customer satisfaction.
• Perform ticket triage, prioritization, independent testing, change management processes, implementation activities and post implementation support.
• Support client interfacing activities and create the relevant reports in a timely manner.
• Excellent written & verbal communication
• Strong Analytical skills
• Experience working with offshore/onshore resources
• Ability to work in team environment and client interfacing skills.
• Experience and desire to work in a Global delivery environment.
• Ability to work in team in diverse/ multiple stakeholder environment
• Experience and desire to work in a Global delivery environment
The job entails sitting as well as working at a computer for extended periods of time. Should be able to communicate by telephone, email or face to face. Travel may be required as per the job requirements.
Qualifications
• Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education.
Additional Information
All your information will be kept confidential according to EEO guidelines.
Lead Service Technician
Installation technician job in Clayton, NC
Lead Service Technician - Engineered Systems
We're looking for a reliable, highly skilled Lead Service Technician to join our Raleigh/Clayton Service Team. This role calls for a critical thinker and hands-on leader with strong industrial electrical and mechanical skills who communicates clearly, takes ownership, and can guide a team of technicians, solve complex problems, and ensure our customers' crane and hoist systems operate safely and efficiently.
Responsibilities
Perform regular maintenance and repair on crane and hoist systems to ensure optimal performance.
Lead, train, and support a team of Technicians in diagnosing system issues, troubleshooting electrical and mechanical problems, and completing repairs efficiently.
Conduct inspections, identify potential issues, and implement solutions to prevent system failures.
Ensure all work meets technical specifications, safety standards, and customer expectations.
Maintain accurate maintenance and inspection logs.
Communicate effectively with team members, management, and customers to coordinate work and resolve issues.
Stay current with industry standards, new technologies, and ESI training programs.
Follow all company policies, procedures, and safety regulations.
Requirements
Proven experience as a Maintenance or Industrial Technician with strong electrical and mechanical skills.
Solid understanding of single and 3-phase motors, low and high voltage systems, and industrial controls.
Ability to read and interpret blueprints, schematics, and technical manuals.
Strong troubleshooting and problem-solving ability.
Effective leadership skills - able to coach, guide, and set expectations for others.
Dependable, self-motivated, and accountable for both quality and safety.
Physical ability to lift/push/pull up to 50 lbs and work at heights when required.
Valid driver's license with a clean driving record.
Why Join ESI?
Collaborative and Positive Work Environment
Success of a company that has been in business over 55 years
Purpose-Driven Culture
Great Benefit Packages: Health, Dental, Vision, Life, Disability, 401(k) with Company Match, Paid Time Off
Employee Assistance Program
Employee Benevolence Program
Cable, Internet Field Technician/Installer - Contractors 1099
Installation technician job in Raleigh, NC
RALEIGH, NC & SURROUNDING AREAS
Cable, Internet Field Technician/Installer - Contractors 1099
***YOU MUST HAVE A TRUCK, VAN, OR SUV (CAPABLE OF CARRYING 6FT A-FRAME AND 28 FT EXTENSION LADDER)***
Who We are Looking For
Lightspeed Construction Group is seeking a reliable Cable Installation Technician CONTRACTORS to add to our team. Although no experience is needed, someone who is familiar with electrical systems or cable technology would make an ideal candidate.
A Little About Us
Lightspeed Construction Group is contracted by Spectrum Cable and provides Independent Contractors to install cable for new and existing Spectrum customers. This headquarters is located in RALEIGH, NC
Job Summary
To be successful in this role, you will need to be highly motivated to learn, organized, and an excellent problem solver. You will need to have excellent customer service skills and be able to provide support to our customers. If you are hard-working, are customer service oriented and like to work with your hands, we'd like to speak with you!
At Lightspeed Construction Group, you will provide
Install and maintain Spectrum cable for new or existing customers
Troubleshoot issues with cable network
Ensure all cables are neatly tied and bundled according to safety regulations
Complete paperwork such as timesheets, checklists and service orders
Qualifications & Skills to be Successful
No experience needed - we will provide training
Pass background check
Ability to work between 8am and 6pm at least 5 days per week
Flexibility to work some weekends and holidays
Must own a truck, van, or SUV (vehicle must be free of physical damage, dependable working order, and painted one color)
Clean driving record
Valid Driving license
Lifting up to 80 lbs at a full range of motion
Have a positive attitude
What We Offer at Lightspeed Construction Group
Independent contractor 1099 position
Hands-on training
Untaxed paychecks (you are responsible for paying your taxes)
Ability to make $1500 - $2000+ or more BI-WEEKLY - depends on your work ethic and drive!
You will have to report to RALEIGH, NC (1 week class 2-3 weeks field in area applying for) for training. Once you complete training you will only be required to come once a week for supplies. Please apply if interested in order to set up an interview. We look forward to speaking with you!
Position # 000740 - Locksmith I (Start Date: 01/05/2026)
Installation technician job in Kinston, NC
General Statement of Job:
Performs skilled level installation, repair and maintenance of locks, windows, door closures, panic hardware systems and electronic locking systems.
Key cutting and duplication. Employee reports to supervisor.
Specific Duties and Responsibilities:
All duties will be supervised by the Locksmith Crew Leader.
Install, replace, open, clean, repair, and perform preventive maintenance on locks for doors, safes, hall gates, desks, file cabinets, lockers, and various other items of furniture and equipment.
Change lock combinations, perform mechanical or computerized grand master, master, and sub master keying and rekeying.
Make new or duplicate keys.
Diagnoses operational problems in locks.
Repairs or replaces worn tumblers, springs, and other parts.
Inserts new or repaired tumblers into lock to change the combinations.
Follows specification for the installation of complex systems.
Makes measurements and cuts materials to exact specification for placement of locks.
Maintenance and repair on door closure systems, including but not limited to key card systems and electromagnetic systems.
Maintains set of master keys for the school system.
Install, repair and maintain all major types of locks, door closures, and panic hardware systems in accordance with work orders and instructions.
Replace broken windows and install new windows as needed
Utilize key cutting machines, drills, saws, buffers and grinders, key gauges and locksmith tools.
Drill plugs from locks to gain access to rooms.
Set up cores and cylinders for any type of lockset.
Additional Job Functions or Assigned Tasks:
Performs other related and non-related work as required.
Minimum Training and Experience
Completion of High School
Willingness to learn the locksmith trade from a qualified, trained professional
Have a valid NC driver's license.
Minimum Qualifications or Standards Required to Perform Essential Job Functions.
Requires the ability to climb and maneuver on ladders, scaffolding, and/or tight spaces.
Must be physically able to operate a variety of machinery and equipment including table saws, drills, hammers, saws, planers.
Physical demand requirements are for medium-heavy work.
Other Requirements:
Must maintain an acceptable attendance record and be punctual
DISCLAIMER
The preceding job description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees of this job.
Locksmith - Lead
Installation technician job in Raleigh, NC
Preferred Qualifications Extensive experience as a locksmith, preferably in an institutional setting. Proficiency in Microsoft Office applications, including Word and Excel. Familiarity with AiM work order systems is a plus but not required. Membership in the Associated Institutional Locksmith Association/and or recognized industry organization is preferred. Certified Journey Level Certification and/or Fire Door Inspector Certification is advantageous but not mandatory.
Work Schedule
Monday - Friday, 7:00 a.m. - 3:30 p.m.
HVAC Install Technician
Installation technician job in Raleigh, NC
APPLY NOW TO TAKE ADVANTAGE OF OUR $1500 SIGN ON BONUS! At Horizon Services, we pride ourselves in creating an excellent working environment by hiring the best technicians, training them better than anyone else, and creating an environment where our technicians are our number one priority.
Reasons you'll love working here:
* Along with our industry leading pay and incentive programs, we also provide flexible schedules to match YOUR lifestyle and NO ON-CALL or MANDATORY WEEKENDS. Overtime available on a volunteer basis. YEAR ROUND WORK. The following are just a few examples of schedules we are looking to hire for TODAY:
* Alternating 5/4 with three-day weekends;
* Mon-Fri 8-6;
* Tue-Sat 8-6,
* Sun-Thu 8-6;
* we also offer FOUR 10-hour shifts with three days off.
* These are just examples - we will customize your shift with YOU!
* Paid Time Off Minimum two weeks after ninety days (We MATCH your current PTO balance if greater than two weeks)
* Full uniforms along with winter coats, spring jackets, t-shirts, sweatshirts, and hats
* Our warehouse DELIVERS everything needed to complete you install to the job! No need to pick up equipment from the warehouse or supplier, or dispose of trash. That's all taken care of by our warehouse team. Go directly to the job in the morning!
* Cooler of Gatorade and protein bars delivered to your job by the warehouse team
* On-site support and training from our field supervisor team
* Company-supplied tools
* Bonus incentives
* Fully stocked warehouse with parts runners operating 7 days a week
* New, clean, fully-stocked truck
* Training & Development Programs: sheet metal class, boiler training, electrical training, zoning training, oil training, and more.
* Career Advancement Opportunities - we pride ourselves in promoting from within the organization and we're committed to helping you grow into a leadership position, if that's a path you're interested in
* Full Benefits Package with a 401k
* Company-issued phone and i-Pad = no paperwork
* Shop is stocked with water, Gatorade, coffee, and snacks
* Flexible schedules that fit YOUR life with NO ON-CALL. We'll design a shift that fits YOUR SCHEDULE.
Apply TODAY and schedule a time to hear more about what we can do for YOU from one of our team members.
Residential Installer
Installation technician job in Raleigh, NC
Responsible for multiple tasks involving the take down of used commercial doors and/or equipment, installation of new commercial doors, operators, equipment and multiple service categories on doors, operators and associated equipment.
At least 1 year related installation or construction experience
Excellent telephone, written and verbal communication skills while interfacing with all levels of staff and customers.
Ability to read and interpret documents such safety rules, operating and maintenance instructions, and procedure manuals.
Basic math skills required. Ability to calculate proportions, percentages, area, circumference, and volume.
Ability to read a tape measure and convert nominal measurements
Willingness to learn product and processes.
Must have valid DL
Education
High School Diploma or GED
Physical/Work Environment Requirements
Ability to work in outside weather conditions
Ability to lift up to 100 pounds.
Repetitive standing, lifting, reaching, bending, climbing, & kneeling
Working on ladders at varying heights.
DISCLAIMER All the above duties and responsibilities are essential job functions subject to reasonable accommodation. All job requirements listed indicate the minimum level of knowledge, skills and/or ability deemed necessary to perform the job proficiently. Employees may be required to perform any other job-related instructions as requested by their supervisor, subject to reasonable accommodation. This document does not crate an employment contract, implied or otherwise, other than an “at will” employment relationship.
Evaluate appropriate commercial door and installation/service requirements for each job.
Prior to commencement of work, determine if appropriate tools and equipment are working and/or available.
Establish the needs of each job and document the full installation/service needed.
Determine if added work needs to be performed and the measures needed to assure approved installation of product. Alterations, construction modifications and obstructions must be noted before each job is to begin. Documentation of the work to be performed is discussed with the Salesperson and/or Scheduling Supervisor for approval.
Perform related minor work in framing, build‑in's, and adjustments.
Service and/or install commercial garage doors using appropriate tools, hardware and equipment.
Service and/or install manufactured commercial garage door operators.
Perform commercial service/installation on a wide range of products, including hinges, operators, door sections, rolling steel, torsion springs, dock equipment, locks, etc.
Care and maintenance of equipment and tools provided by WDGSC.
Maintain appropriate parts inventory in the vehicle to ensure that items are available for service/installation work.
Auto-ApplyField Installer
Installation technician job in Zebulon, NC
Job DescriptionDescription:
The Lead Installer/Installer helps the Crew Leader bring each job to completion, while working with quality, efficiency, and safety. This position is non-exempt under the FLSA and reports to the Production Manager.
ESSENTIAL JOB FUNCTIONS
Installations
Loads the truck before leaving the company, ensuring everything needed is on the truck.
Performs high quality installations, moving job progress to an on-time completion.
Follows the lead of the Crew Leader.
Offers suggestions that will help the quality, efficiency, or safety of the job.
Remarkable Customer Experience
When needed, assists Crew Leader with communicating with the customer using the company's customer messaging.
Ensures the customer is happy with the finished job.
Leaves the customer's home clean and proactively take measures to leave it in better condition than found.
Provides customers with a remarkable experience.
Maintain & Clean Company Vehicles
Safely, correctly, and efficiently unloads and cleans the truck upon return to the company.
Takes great care of the company's products, tools, and equipment.
Purpose, Mission, Values
We believe in always doing the right thing.
We change lives.
We are ONE TEAM. We are passionate. We are learners. WE HAVE GRIT.
Requirements:
POSITION REQUIREMENTS
Knowledge of construction or related trades preferred.
Ability and skill in operating equipment and/or power tools preferred.
Ability to operate a phone/apps/tablet.
Ability to detect/recognize information in written materials or on a screen up to 75% of the time.
Ability to understand, speak, read, and write in English.
High school diploma or GED preferred and 1+ years of experience in the construction trades OR a combination of education and experience that illustrates a proven track record in this field.
Ability to lift or move up to 100 lb. occasionally, and/or up to 50 lb. of force frequently, and/or up to 20 lb. of force constantly to move objects.
Ability to stay upright/stand up to 100% of the time.
Ability to move about and move to/from and work from the floor level or in crawl spaces.
A valid driver's license (and/or CDL), safe driving record, and ability to drive for the company.
Lead Mobile Forklift Service Technician
Installation technician job in Raleigh, NC
Job Description
If you're a skilled and passionate forklift mechanic ready for an exciting new challenge, we have the perfect opportunity for you. At AAA Forklifts, we're seeking a dedicated full-time Lead Mobile Forklift Service Technician to join our team in Raleigh, NC. With a competitive base pay of $32 - $40/hour (based on experience) plus commission. We also offer incredible benefits like a take-home company vehicle, paid tolls and gas, and a $1,000 tool financing program, this is more than just a job - it's an opportunity to grow in your career with a company that values your expertise.
But that's not all we offer! You can also enjoy these excellent benefits and perks:
Commission structure
Health, dental, and vision
A 401(k) with a 3.5% match
Paid time off (PTO)
6 paid holidays
Flexible scheduling
As a Lead Mobile Forklift Service Technician, you'll enjoy a consistent, full-time schedule, working Monday through Friday, 7:00 AM to 5:00 PM. This mobile routine offers the perfect balance between your professional and personal life, providing structure while giving you weekends off to recharge.
WANT TO KNOW MORE ABOUT US?
As the one-stop-shop for everything material-handling related, we offer a wide range of services including repair and maintenance to buying, trading, and selling! It's not just a job here - it's a place where every team member genuinely enjoys coming to work. Our upbeat company culture fosters a supportive environment where we have a good time while understanding the importance of getting the job done right. From day one, we welcome our employees with open arms, emphasizing our commitment to their growth and well-being. With an open-door policy and a focus on being employee-centric, we ensure that everyone's voice is heard and respected!
DOES THIS SOUND LIKE YOU?
Required qualifications:
5+ years of experience as a mechanic
Hydraulic or diesel experience
Your own tools
Clean driving record
Preferred qualifications:
10+ years of experience as a mechanic
Construction or equipment mechanic experience
Ability to read and follow electrical diagrams or schematics
Experience in manual troubleshooting (no computers or code readers)
READY TO APPLY?
Be our new Lead mobile Forklift Service Technician! Getting started is quick and easy with our 3-minute, mobile-friendly initial application. We can't wait to hear from you!
Must have the ability to pass a background check.
Job Posted by ApplicantPro
Fiber Splicer
Installation technician job in Raleigh, NC
Fiber Splicer / Field Operations Technician
FULL-TIME | NATIONWIDE TRAVEL | MUST BE WILLING TO TRAVEL 4 WEEKS AT A TIME Company: E-3 Technical Solutions
OUR VISION At E-3 Technical Solutions, we are committed to creating opportunities for our team to thrive and grow in the telecommunications industry. Our reputation is built on reliability, technical excellence, and a commitment to doing the job right the first time. We believe that when we take care of our people and our customers, success follows.
JOB SUMMARY
We are currently seeking a motivated and experienced Fiber Splicer / Field Operations Technician to join our nationwide team. This full-time, travel-based role is critical to the deployment and maintenance of high-performance fiber optic networks across the country.
The ideal candidate will have practical, in-the-field experience with fiber optic splicing, testing, and troubleshooting, and be comfortable working independently in dynamic environments.
KEY RESPONSIBILITIES
Install, splice, and test single-mode and multi-mode fiber optic cables and connectors
Perform OTDR, power meter, and light source testing for end-to-end validation
Interpret fiber optic schematics, splice plans, and network diagrams
Conduct troubleshooting and resolve technical issues efficiently in the field
Complete preventative maintenance and report potential infrastructure issues
Maintain thorough and accurate documentation of all work performed
Collaborate with engineering, construction, and project teams to support deployments
Manage and maintain inventory of fiber optic tools, test gear, and consumables
Follow all safety protocols and adhere to company and industry quality standards
REQUIREMENTS
High school diploma or equivalent; Associate's or Bachelor's degree in a technical field preferred
Proven field experience with fiber optic installation, splicing, and testing
Strong understanding of OTDRs, power meters, fusion splicers, and related equipment
Excellent problem-solving skills and attention to detail
Effective communication skills (both verbal and written)
Valid driver's license and reliable transportation
Ability to work independently with minimal supervision
Flexible schedule - must be able to work evenings, weekends, or on-call as needed
Comfortable with extensive nationwide travel (3-4 weeks at a time)
WHAT WE OFFER
Competitive pay
Paid travel and per diem
Opportunity to grow with a rapidly expanding telecom company
A supportive team that values quality, safety, and professionalism
HOW TO APPLY
If you're passionate about fiber optics, thrive in the field, and are ready to travel and grow with a company that values your work, we want to hear from you. Please submit your resume and a brief cover letter to be considered.
Fire Alarm Service Technician (55549)
Installation technician job in Raleigh, NC
The Hiller Companies, LLC has an immediate opening for Fire Alarm Service Technician. If you are a dedicated professional with a passion for fire protection and safety, we invite you to apply today. The Hiller Companies is a leading provider of fire protection and safety solutions, dedicated to safeguarding lives and property all around the world. Headquartered in Mobile, Alabama, Hiller extends its reach globally as well as in domestic markets with offices across the United States. With over 100 years in the industry, our mission is to ensure the highest standard of safety and innovation in comprehensive fire protection services, including installation, inspection, maintenance and repair of critical fire and life safety equipment. Our team remains laser-focused on one goal - making the world a safer place.
Job Summary: A Fire Alarm Service Technician is responsible for the inspection, testing, maintenance and repair of fire alarm systems in accordance with industry standards and regulations. The Fire Alarm Technician plays a critical role in safeguarding lives and property by conducting thorough and detailed inspections, performing required maintenance and providing expert advice to valued customers.
Key Responsibilities:
* Conduct routine inspections and testing of fire alarm components, including control panels, detectors, horns, strobes and annunciators, to verify proper operation
* Prepare detailed reports documenting inspection findings, test results and any related deficiencies or non-compliance issues observed, in accordance with NFPA codes and standards
* Troubleshoot system malfunctions and perform repairs as needed, identifying and resolving issues with wiring, circuitry, devices and software
* Respond promptly to service calls and emergency requests, diagnosing problems and implementing solutions to restore system functionality
* Conduct preventive maintenance activities, such as cleaning, calibration and battery replacement, to prolong the lifespan of fire alarm systems and prevent downtime
* Document all service activities accurately and thoroughly, including inspection reports, work orders, parts usage and customer notes, using the ServiceTrade operations platform
* Work closely with Deficiency Sellers to provide detailed inspection reports, material needs and other job-related notes, to prepare and deliver repair estimates in a timely manner, always ensuring customer satisfaction
* Interact professionally with clients to schedule work, discuss inspection findings, address any concerns or questions and provide recommendations for system upgrades or improvements
* Work closely with Service Coordinator(s) to optimize work orders, material requisitions and job scheduling, focusing on efficiency, productivity and customer satisfaction
* Maintain a clean and organized work environment, always adhering to safety guidelines, protocols and procedures
Lead Apartment Service Technician
Installation technician job in Raleigh, NC
Morguard is a fully integrated real estate company. We strategically invest in high-quality, well-located, multifamily assets across North America and our onsite teams are critical to our Communities' success.
Now hiring an experienced Lead Maintenance Technician to support maintenance operations for our residential community.
We're Hiring
An HVAC Certified Lead Maintenance Technician to manage the work orders, preventative maintenance, and day to day work load of the onsite team under the direction of our Community Manager.
Pay:
The pay rate for this position is $35-$37 per hour.
Are eligible for employer provided benefits as well as added income via quarterly bonuses - up to 5% of the annual salary.
Are eligible for a $100 stipend for on-call duties.
Hours:
Full time, Monday through Friday, from 8:00 AM to 5:00 PM with an hour off for lunch.
In this role, you will be required to participate in the On-Call Rotation.
Take turns responding to On-Call Emergencies, one-week rotation
Each On-Call Rotation earns an added On-Call Stipend - paid directly to you even if you're not called to the property
We're looking for you
To help maintain the highest standards for our apartment community. You'll also be responsible for routine maintenance and called to assist with any capital improvement projects onsite.
We need your strong work ethic, customer service for our residents, and a good foundation in general appliance repair, painting, plumbing, and ac diagnostics and repair.
Some of your responsibilities include:
Being thorough and courteous; we need you to accurately assess the root cause of each work order that comes in and do your best to close it out and improve our residents' homes
Walk the property each day; know your grounds and your buildings and clear away any trash or debris that you find.
Manage the inventory of vacant apartments; assist with the turn-around process or schedule any required contractors as needed. Inspect all vacant units before the move in to maintain quality
Respond to assigned work orders or general maintenance in a timely manner and always communicate with your Maintenance Supervisor or Property Manager as things move forward or take longer to complete than anticipated
Work with the Regional Maintenance Supervisor on any special projects or property wide routine maintenance as necessary
Above all, you will be responsible for staying in sync with the company's and the community's operating and safety policies and procedures and for adhering to federal, state and local laws pertaining to the operation of the community and Fair Housing.
Qualifications
Experience & strengths you'll need:
HVAC Type I and Type II/EPA Universal Certification; a CPO certification is highly preferred but not required.
Valid Driver's License & ability to respond to after hours or weekend emergencies
Well versed with troubleshooting major appliances, water heaters, boilers, and AC units.
Direct previous experience on a garden-style apartment community
A dedication to company goals and values and a commitment to the success of each associate as a member of the team
Good communicator and listener with strong customer service skills
General knowledge or direct experience of plumbing, drywall repair, painting, carpentry, pressure cleaning, or minor electric troubleshooting and repair
Possess and continually improve the technical skills necessary to perform assigned maintenance
This position makes use of onsite golf carts for purposes of property tours and inspections. The identified candidate is required to provide proof of a valid Driver's License in good standing for consideration of hire.
Additional Information
Why you should join Morguard
At Morguard, our employees are our greatest investment. We make people our priority and strive to create a culture of respect, health and safety, and equal opportunity to support employees to meet their goals.
When you join Morguard, you join a strong and committed team and will have access to:
Employer Provided Medical Insurance Options
Excellent culture that supports a work-life balance with time off for Summer Hours, Vacation, Personal, Sick Leave, and Paid Holidays
Education Reimbursement Program
Dollar for dollar matching 401k Savings Plan with immediate vesting
Opportunity to live onsite within portfolio with our Employee Discount
All job offers are subject to a pre-employment drug test and criminal/credit background check.
*Morguard is an equal opportunity employer
+This is intended to describe the nature and level of work being performed by individuals assigned to this position. It is not an exhaustive list of all responsibilities required of the job. Job descriptions may also be rewritten periodically to reflect any changes in the position's duties.
Morguard is an equal opportunity employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. Morguard participates in the E-Verify program to confirm eligibility to work in the United States.
PRIVACY
Lead Apartment Service Technician
Installation technician job in Raleigh, NC
Morguard is a fully integrated real estate company. We strategically invest in high-quality, well-located, multifamily assets across North America and our onsite teams are critical to our Communities' success. Now hiring an experienced Lead Maintenance Technician to support maintenance operations for our residential community.
We're Hiring
An HVAC Certified Lead Maintenance Technician to manage the work orders, preventative maintenance, and day to day work load of the onsite team under the direction of our Community Manager.
Pay:
The pay rate for this position is $35-$37 per hour.
Are eligible for employer provided benefits as well as added income via quarterly bonuses - up to 5% of the annual salary.
Are eligible for a $100 stipend for on-call duties.
Hours:
Full time, Monday through Friday, from 8:00 AM to 5:00 PM with an hour off for lunch.
In this role, you will be required to participate in the On-Call Rotation.
Take turns responding to On-Call Emergencies, one-week rotation
Each On-Call Rotation earns an added On-Call Stipend - paid directly to you even if you're not called to the property
We're looking for you
To help maintain the highest standards for our apartment community. You'll also be responsible for routine maintenance and called to assist with any capital improvement projects onsite.
We need your strong work ethic, customer service for our residents, and a good foundation in general appliance repair, painting, plumbing, and ac diagnostics and repair.
Some of your responsibilities include:
Being thorough and courteous; we need you to accurately assess the root cause of each work order that comes in and do your best to close it out and improve our residents' homes
Walk the property each day; know your grounds and your buildings and clear away any trash or debris that you find.
Manage the inventory of vacant apartments; assist with the turn-around process or schedule any required contractors as needed. Inspect all vacant units before the move in to maintain quality
Respond to assigned work orders or general maintenance in a timely manner and always communicate with your Maintenance Supervisor or Property Manager as things move forward or take longer to complete than anticipated
Work with the Regional Maintenance Supervisor on any special projects or property wide routine maintenance as necessary
Above all, you will be responsible for staying in sync with the company's and the community's operating and safety policies and procedures and for adhering to federal, state and local laws pertaining to the operation of the community and Fair Housing.
Qualifications
Experience & strengths you'll need:
HVAC Type I and Type II/EPA Universal Certification; a CPO certification is highly preferred but not required.
Valid Driver's License & ability to respond to after hours or weekend emergencies
Well versed with troubleshooting major appliances, water heaters, boilers, and AC units.
Direct previous experience on a garden-style apartment community
A dedication to company goals and values and a commitment to the success of each associate as a member of the team
Good communicator and listener with strong customer service skills
General knowledge or direct experience of plumbing, drywall repair, painting, carpentry, pressure cleaning, or minor electric troubleshooting and repair
Possess and continually improve the technical skills necessary to perform assigned maintenance
This position makes use of onsite golf carts for purposes of property tours and inspections. The identified candidate is required to provide proof of a valid Driver's License in good standing for consideration of hire.
Additional Information
Why you should join Morguard
At Morguard, our employees are our greatest investment. We make people our priority and strive to create a culture of respect, health and safety, and equal opportunity to support employees to meet their goals.
When you join Morguard, you join a strong and committed team and will have access to:
Employer Provided Medical Insurance Options
Excellent culture that supports a work-life balance with time off for Summer Hours, Vacation, Personal, Sick Leave, and Paid Holidays
Education Reimbursement Program
Dollar for dollar matching 401k Savings Plan with immediate vesting
Opportunity to live onsite within portfolio with our Employee Discount
All job offers are subject to a pre-employment drug test and criminal/credit background check.
*Morguard is an equal opportunity employer
+This is intended to describe the nature and level of work being performed by individuals assigned to this position. It is not an exhaustive list of all responsibilities required of the job. Job descriptions may also be rewritten periodically to reflect any changes in the position's duties.
Morguard is an equal opportunity employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. Morguard participates in the E-Verify program to confirm eligibility to work in the United States.
PRIVACY
Lead Apartment Service Technician
Installation technician job in Raleigh, NC
Morguard is a fully integrated real estate company. We strategically invest in high-quality, well-located, multifamily assets across North America and our onsite teams are critical to our Communities' success. Now hiring an experienced Lead Maintenance Technician to support maintenance operations for our residential community.
We're Hiring
An HVAC Certified Lead Maintenance Technician to manage the work orders, preventative maintenance, and day to day work load of the onsite team under the direction of our Community Manager.
Pay:
* The pay rate for this position is $35-$37 per hour.
* Are eligible for employer provided benefits as well as added income via quarterly bonuses - up to 5% of the annual salary.
* Are eligible for a $100 stipend for on-call duties.
Hours:
* Full time, Monday through Friday, from 8:00 AM to 5:00 PM with an hour off for lunch.
In this role, you will be required to participate in the On-Call Rotation.
* Take turns responding to On-Call Emergencies, one-week rotation
* Each On-Call Rotation earns an added On-Call Stipend - paid directly to you even if you're not called to the property
We're looking for you
To help maintain the highest standards for our apartment community. You'll also be responsible for routine maintenance and called to assist with any capital improvement projects onsite.
We need your strong work ethic, customer service for our residents, and a good foundation in general appliance repair, painting, plumbing, and ac diagnostics and repair.
Some of your responsibilities include:
* Being thorough and courteous; we need you to accurately assess the root cause of each work order that comes in and do your best to close it out and improve our residents' homes
* Walk the property each day; know your grounds and your buildings and clear away any trash or debris that you find.
* Manage the inventory of vacant apartments; assist with the turn-around process or schedule any required contractors as needed. Inspect all vacant units before the move in to maintain quality
* Respond to assigned work orders or general maintenance in a timely manner and always communicate with your Maintenance Supervisor or Property Manager as things move forward or take longer to complete than anticipated
* Work with the Regional Maintenance Supervisor on any special projects or property wide routine maintenance as necessary
Above all, you will be responsible for staying in sync with the company's and the community's operating and safety policies and procedures and for adhering to federal, state and local laws pertaining to the operation of the community and Fair Housing.
Qualifications
Experience & strengths you'll need:
* HVAC Type I and Type II/EPA Universal Certification; a CPO certification is highly preferred but not required.
* Valid Driver's License & ability to respond to after hours or weekend emergencies
* Well versed with troubleshooting major appliances, water heaters, boilers, and AC units.
* Direct previous experience on a garden-style apartment community
* A dedication to company goals and values and a commitment to the success of each associate as a member of the team
* Good communicator and listener with strong customer service skills
* General knowledge or direct experience of plumbing, drywall repair, painting, carpentry, pressure cleaning, or minor electric troubleshooting and repair
* Possess and continually improve the technical skills necessary to perform assigned maintenance
This position makes use of onsite golf carts for purposes of property tours and inspections. The identified candidate is required to provide proof of a valid Driver's License in good standing for consideration of hire.
Additional Information
Why you should join Morguard
At Morguard, our employees are our greatest investment. We make people our priority and strive to create a culture of respect, health and safety, and equal opportunity to support employees to meet their goals.
When you join Morguard, you join a strong and committed team and will have access to:
* Employer Provided Medical Insurance Options
* Excellent culture that supports a work-life balance with time off for Summer Hours, Vacation, Personal, Sick Leave, and Paid Holidays
* Education Reimbursement Program
* Dollar for dollar matching 401k Savings Plan with immediate vesting
* Opportunity to live onsite within portfolio with our Employee Discount
All job offers are subject to a pre-employment drug test and criminal/credit background check.
* Morguard is an equal opportunity employer
+This is intended to describe the nature and level of work being performed by individuals assigned to this position. It is not an exhaustive list of all responsibilities required of the job. Job descriptions may also be rewritten periodically to reflect any changes in the position's duties.
Morguard is an equal opportunity employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. Morguard participates in the E-Verify program to confirm eligibility to work in the United States.
PRIVACY
HVAC TB Sr Controls Technician
Installation technician job in Raleigh, NC
Be part of the future!
We are one team, dedicated to working collaboratively to create purposeful solutions that propel the world forward. We hope you will join our diverse team of top people - you bring your talent, and we'll give you the space and opportunities to grow and succeed. We are committed to make a difference.
Work with an Award-Winning technology that delivers sustainability, safety, and health.
What we offer:
Competitive Starting Pay
On the Job Paid Training
Tuition Reimbursement
Global Advancement Opportunities with Unlimited Career Path
Company Vehicle (as applicable)
Referral Bonuses
Comprehensive Benefits
Medical/Dental/Vision insurance
Health Savings Account (HSA)
Life Insurance
401(k) savings plan with company match
Short-Term and Long-Term Disability
Employee Assistance Program
Wellness Program
And More!
What you will do
Perform HVAC Control systems programming, troubleshooting, installation, commissioning, and preventative maintenance as it is related to mechanical, electrical, and low voltage controls components.
Respond to service and warranty calls using Johnson Controls configuration and commissioning tools as well as a variety of hand tools including electrical testing meters and other electronic testing equipment.
Provide front line technical and repair support through effective communications with Johnson Controls customers. Provide system repair and or update recommendations and assist in proposing of recommendations to Johnson Controls customers.
Be part of an expanding team of the best technicians in the industry while you build career with a first-class global organization.
How you will do it
Loading Johnson Controls field and network level controller software.
Performing commissioning and system diagnostics for all levels of system controllers as well as end devices (i.e. Sensors, actuators, etc.) and complete all required commissioning documentation.
Keeps management and JCI contractor or customer informed of job progress and issues.
Calibrates systems requiring basic electronic test equipment.
Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation.
Documents changes and provides information for as-built documentation.
Execute company sponsored as well as personally initiated training to insure the highest level of knowledge and capability are maintained
Engage with customers to fully understand their systems and needs.
Communicates with the JCI contractor or customer upon arrival and before leaving the work site.
Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety.
What we look for
Required:
2-4 years experience with BAS, Honeywell, Siemens , Tridium , Trane, Automated etc...
Strong understanding of HVAC systems, sequence and applications
Demonstrated technical aptitude in mechanical and electro-mechanical fields
Able to use hand, power tools and electrical testing equipment such as a multi meter.
Solid knowledge base in use of personal computers.
Attention to detail.
Good communication and listening skills.
HIRING HOURLY RANGE: $24- $34(Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at *****************************************
Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.
Auto-ApplyTelecom Fiber Splicer - North Carolina
Installation technician job in Raleigh, NC
Job Description
The Fiber Optic Splicer Technician position installs and maintains fiber optic cables as well as provides technical assistance in the design and testing of fiber optics. Responsible for ensuring the integrity and efficiency of our network systems through expertise in splicing techniques and equipment repair.
Duties & Responsibilities
Splice single mode and ribbon fiber
Fusion splice and terminate various types of fiber optic connectors
Interpret as-builts and splicing matrices
Installation and dressing of fiber optic cabling
Perform uni-directional, bi-directional, and power meter testing (OLTS)
Troubleshoot fiber optic links and certify fiber optic links
Respond to emergency situations to restore service outages
Report splicing matrix.
Physical Aspects
· The physical demands described here are typical of those that must be met by a team-member to successfully perform the essential functions of their job in fiber cable construction.
· While performing the duties of this job, team-members are regularly required to talk or listen. The team member is frequently required to stand; walk; use hands to finger, handle, and feel; and reach with hands and arms.
· The team member is frequently required to perform rigorous physical labor; sit; climb different types of structures (wood, steel, etc.); or balance; and stoop, kneel crouch or crawl. Team members frequently lift or move up to or in-excess of 50 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Work Environment
While performing the duties of this job, team-members may frequently be exposed to fumes or airborne particles, moving mechanical parts and vibration. Team members are occasionally exposed to a variety of extreme conditions at construction sites. The noise level in the work environment can be loud. Powerline construction work is performed outside and is subject to diverse weather conditions.
Competencies
Team-Oriented
Self-Motivated
Customer Service Focused
Ethical and Honest
Dutifully follows established Safety Rules and Company Policy
Required Qualifications
Minimum of 2 years of experience in fiber splicing.
Experience with single fiber splicing, ribbon splicing, power meter and OTDR.
Good understanding of aerial and buried fiber optic plant.
Strong understanding and ability to read prints and diagrams associated with splicing.
Excellent communication skills (verbal and written) & the ability to interact professionally with customers.
Valid Driver's License and acceptable driving record.
Valid DOT Medical Card.
Ability to work under pressure and in a fast paced and quickly changing environment.
Ability & Willingness to travel and work evenings and weekends as needed. This position will require being able to respond to afterhours fiber outages.
Ability to work and climb up to 35 feet.
Ability to maintain a positive attitude and strong work ethic.
Proficient in Microsoft Office Suite (Excel and Word).
Excellent organizational skills and strong attention to detail.
This is a safety sensitive position, and all applicable policies including drug testing and background checks will apply.
Special Position Requirements
River City Construction provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, national origin, age, disability or genetics. In addition to federal law requirements, River City complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.
Benefits
We offer a comprehensive benefits package designed to support the well-being of our employees and their families. Our benefits include medical, dental, and vision coverage, paid time off, company-paid holidays, a 401(k) plan, and numerous voluntary benefits.
Fire Alarm Commissioning/Low Voltage Technician
Installation technician job in Raleigh, NC
Merit Electric is a national electrical contractor seeking a Fire Alarm Commissioning/Low Voltage Technician to perform installations, terminations, programming and testing of Fire Alarm, Voice/Data, Door Access, AOR, and PA systems for large retirement community projects nationwide.
Essential Duties and Responsibilities
• Installs, modifies, maintains, programs, and repairs fire alarm and door access panels.
• Installs all cabling, devices, and punch down of Voice/Data system.
• Test all systems and equipment, after installations or repairs are made, to ensure performance of system.
• Installs all NAC and SLC devices.
• Performing maintenance service calls at customer sites on security, fire, PA and various other systems.
• Install, diagnose, and repair/replace wiring, devices on both analog and digital control panels for fire alarm systems.
• Maintain and repair smoke and heat detectors, magnetic door holders, and fire alarm system components, including circuit cards, power supplies, software, copper and fiber optic systems platforms.
• Serve as a technical advisor on systems programming and configuration, as well as coordinate code requirements with local fire marshals, and other trades.
Knowledge & Skills
• All aspects of fire alarm hardware and software systems.
• NFPA codes and local codes.
• Possess knowledge of computer programming and technologies related to fire alarm, security and other low voltage systems.
• Basic understanding of other low voltage systems such as, door access, phone systems, voice/data cabling, public address.
• Communicate systems performance to customer.
• Oversee and ensure proper completion of work performed by team members, and train technicians and other employees on proper procedures.
• Read and interpret blueprints, diagrams, submittals and product manuals to properly program and verify new systems.
• Maintaining confidentiality of work related information and materials.
• Effective organization and planning skills.
• Ability to communicate in a concise and effective manner.
• Ability to understand and follow instructions precisely.
• Ability to work independently.
Physical Requirements
• Ability to lift up to 35 pounds and hear horn and/or warning devices at a distance of 30 yards.
• Perform tasks requiring bending, stooping, kneeling, standing and walking significant distances.
• Visual ability (uncorrected or corrected) to observe and detect signs of dangerous obstacles at a distance of 30 yards and to verify written information at a close range.
• Work from ladders and scaffolds at heights above 30 feet.
Experience, Education, and Licenses
• Four years related experience to include one year experience specifically working with fire alarm systems.
• Experience and knowledge in the implementation of smoke evac control systems and control panels.
• High School diploma or educational equivalent.
• Valid Driver's License
• Installation, service, troubleshooting and programming numerous Fire Alarm Systems including: Silent Knight, Fire-Lite , Mircom, Potter, Simplex, Notifier, and EST.
• NICET Certification preferred but not required.• Proficient in Microsoft Office Software and strong PC skills.
• High School Diploma or equivalent.
Other
Routine Travel is required.
Salary negotiable based on experience
Are you looking for an opportunity to demonstrate your abilities with a leading electrical contractor? Merit Electric is a premier electrical contractor servicing new construction for the independent living industry. At Merit Electric, we provide high quality work on each and every job, ensuring our work meets the expectations of our clients. As a leader in the electrical field we take pride in being the trade that sets the bar for others on each project. Having earned a well-respected reputation in our industry, we are in search of professionals that are highly motivated and able to carry on our reputation with our clients.
If you are such an individual then we want you on our Merit Electric team!
Auto-ApplyHVAC Installer / Technician
Installation technician job in Raleigh, NC
Job DescriptionBenefits:
401(k)
Company car
Competitive salary
Dental insurance
Employee discounts
Free food & snacks
Free uniforms
Health insurance
Paid time off
Training & development
Vision insurance
Bonus based on performance
Job Summary:
We are looking for a skilled and experienced HVAC Installer / Technician to join our team! In this role, you will primarily install/replace heating and air conditioning systems in residences and some commercial establishments. You will also perform service and maintenance of systems during the slow seasons.
You have past experience being a HVAC Installer and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must!
Responsibilities:
Replace and install heating, ventilating, and air conditioning (HVAC) systems to improve efficiency
Establish customer rapport to ensure the highest levels of satisfaction
Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution
Test electrical circuits or components for continuity, using electrical test equipment
Repair or replace defective equipment, components, or wiring
Duct cleaning
Qualifications:
3 years experience as a HVAC Installer
2 years experience as a HVAC Service Technician
Valid Drivers License with clean driving record
EPA Certification
Experience with operation and maintenance of heat pumps, and air handlers.
Experience brazing and replacing coils, air handlers, condensers, compressors.
Ability to climb ladders, crawl, and lift 70 pounds
Benefits/Perks
Competitive hourly rate + bonus
Career Advancement Opportunities
Company vehicle
Health/Vision/Dental benefits
On-going training
401k
Annual boot allowance
Paid time off
Drinks and snacks
HVAC Service Technician
Installation technician job in Raleigh, NC
Job Description
Commercial HVAC Technician - Raleigh, NC
Company: AC Corporation, a Crete United Company
Job Type: Full-Time, Year-Round
Pay: Competitive, based on experience + full benefits package
Join a Leading HVAC Team
AC Corporation, a Crete United Company, is actively hiring experienced Commercial HVAC Technicians to join our Raleigh, NC team. We provide multi-service building solutions including HVAC, plumbing, electrical, low-voltage cabling, building automation, and access control. With full-time, year-round work, competitive pay, and industry-best benefits, this is a great opportunity to advance your HVAC career.
Key Responsibilities
Service, troubleshoot, and repair HVAC/R equipment including chillers, boilers, rooftop units, and split systems.
Diagnose electrical, control, and mechanical issues and replace or repair components such as compressors, fans, pumps, and thermostats.
Perform preventative maintenance and conduct detailed inspections on commercial HVAC systems.
Document key metrics such as pressure, airflow, temperature, and humidity.
Ensure compliance with safety regulations and maintain all required certifications.
Accurately complete daily service reports and communicate effectively with team members and customers.
Participate in rotating on-call duties and flexible shift work when needed.
Qualifications
EPA Certification for refrigerant handling (required).
Minimum of 4 years' experience working on commercial or industrial HVAC systems.
Knowledge of refrigeration systems, pneumatic/digital controls, and electrical troubleshooting.
Ability to read schematics, follow instructions, and work independently.
Valid driver's license and clean driving record (company vehicle provided).
Strong communication and problem-solving skills.
Willingness to work in outdoor environments and elevated spaces year-round.
Physical Requirements
Lift, push, and pull up to 75 lbs.
Stand and walk for up to 8 hours per shift.
Climb ladders and work on rooftops and in confined spaces.
Stoop, kneel, twist, and bend regularly.
Operate in outdoor conditions year-round.
What We Offer
Competitive hourly pay (DOE).
Company-provided vehicle.
Medical, dental, and vision insurance.
Company-paid life insurance and short/long-term disability.
401(k) plan with 100% match up to 4%.
Eight paid holidays and generous PTO.
Paid training and professional development opportunities.
“Build The Future with AC Corporation, a Crete United Company”
AC Corporation is an Equal Opportunity/Affirmative Action Employer. We consider all qualified applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.